SBL10L30, SBLF10L30, SBLB10L30 www.vishay.com Vishay General Semiconductor Low VF Schottky Barrier Rectifier TO-220AC FEATURES ITO-220AC * Power pack * Guardring for overvoltage protection * Low power loss, high efficiency * Very low forward voltage drop * High forward surge capability 2 2 1 1 SBL10L30 SBLF10L30 PIN 1 PIN 1 CASE PIN 2 PIN 2 TO-263AB * High frequency operation * Meets MSL level 1, per J-STD-020, LF maximum peak of 245 C (for TO-263AB package) * Solder bath temperature 275 C maximum, 10 s, per JESD 22-B106 (for TO-220AC and ITO-220AC package) * AEC-Q101 qualified K * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 2 1 SBLB10L30 TYPICAL APPLICATIONS PIN 1 PIN 2 K HEATSINK For use in low voltage, high frequency rectifier of switching mode power supplies, OR-ring diode, freewheeling diodes, DC/DC converters, and polarity protection application. MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 30 V IFSM 200 A VF 0.43 V TJ max. 150 C Package TO-220AC, ITO-220AC, TO-263AB Diode variations Single Case: TO-220AC, ITO-220AC, TO-263AB Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 C unless otherwise noted) SYMBOL VALUE Maximum repetitive peak reverse voltage VRRM 30 PARAMETER UNIT Working peak reverse voltage VRWM 21 Maximum DC blocking voltage VDC 30 Maximum average forward rectified current at TC = 140 C IF(AV) 10 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 200 Peak repetitive reverse surge current at tp = 2.0 s, 1 kHz IRRM 1.0 Voltage rate of change (rated VR) dV/dt 10 000 V/s TJ, TSTG - 65 to + 150 C VAC 1500 V Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Revision: 09-Aug-13 V A Document Number: 88724 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SBL10L30, SBLF10L30, SBLB10L30 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS Maximum instantaneous forward voltage VF (1) IF = 10 A Maximum instantaneous reverse current at DC blocking voltage IR (2) Rated VR VALUE TC = 25 C 0.52 TC = 125 C 0.43 TC = 25 C 1.0 TC = 125 C 100 UNIT V mA Notes (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case per leg SYMBOL SBL SBLF SBLB UNIT RJC 4.3 4.8 4.3 C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC SBL10L30-E3/45 1.80 45 50/tube Tube ITO-220AC SBLF10L30-E3/45 1.94 45 50/tube Tube TO-263AB SBLB10L30-E3/45 1.33 45 50/tube Tube TO-263AB SBLB10L30-E3/81 1.33 81 800/reel Tape and reel TO-220AC SBL10L30HE3/45 (1) 1.80 45 50/tube Tube ITO-220AC SBLF10L30HE3/45 (1) 1.94 45 50/tube Tube TO-263AB SBLB10L30HE3/45 (1) 1.33 45 50/tube Tube TO-263AB SBLB10L30HE3/81 (1) 1.33 81 800/reel Tape and reel Note (1) AEC-Q101 qualified Revision: 09-Aug-13 Document Number: 88724 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SBL10L30, SBLF10L30, SBLB10L30 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 10 000 Resistive or Inductive Load Junction Capacitance (pF) Average Forward Rectified Current (A) 12.5 10 7.5 5 2.5 100 10 0 100 50 0.1 150 1 10 Case Temperature (C) Reverse Voltage (V) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Junction Capacitance 100 100 10 Transient Thermal Impedance (C/W) 100 Instantaneous Forward Current (A) 1000 TJ = 150 C 1 TJ = 125 C TJ = 100 C 0.1 TJ = 25 C 0.01 0 0.2 0.4 0.6 0.8 1.0 10 1 0.1 0.01 0.1 1 10 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 2 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Transient Thermal Impedance Instantaneous Reverse Current (mA) 1000 TJ = 150 C 100 10 TJ = 125 C 1 TJ = 100 C 0.1 0.01 TJ = 75 C 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 3 - Typical Reverse Characteristics Revision: 09-Aug-13 Document Number: 88724 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SBL10L30, SBLF10L30, SBLB10L30 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 0.350 (8.89) 0.330 (8.38) 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.603 (15.32) 0.573 (14.55) 0.671 (17.04) 0.651 (16.54) 0.600 (15.24) 0.580 (14.73) PIN 1 0.205 (5.20) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.035 (0.89) 0.025 (0.64) Mounting Pad Layout 0.42 (10.66) MIN. 0.055 (1.40) 0.045 (1.14) 0.33 (8.38) MIN. 0.360 (9.14) 0.320 (8.13) K 2 0.624 (15.85) 0.591 (15.00) Revision: 09-Aug-13 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) K 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 7 REF. 0.191 (4.85) 0.171 (4.35) CASE 0.037 (0.94) 0.027 (0.68) 7 REF. 2 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 1.148 (29.16) 1.118 (28.40) 2 7 REF. 0.076 (1.93) REF. 45 REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) Document Number: 88724 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: SBL10L30/45 SBL10L30-E3/45 SBL10L30HE3/45 SBLB10L30/45 SBLB10L30/81 SBLB10L30-E3/45 SBLB10L30E3/81 SBLB10L30HE3/45 SBLB10L30HE3/81 SBLF10L30-E3/45 SBLF10L30HE3/45 SBLB10L30/31