IGB01N120H2
Power Semiconductors 1 Rev. 2.4 Oct. 07
HighSpeed 2-Technology
Designed for frequency inverters for washing
machines, fans, pumps and vacuum cleaners
2nd generation HighSpeed-Technology
for 1200V applications offers:
- loss reduction in resonant circuits
- temperature stable behavior
- parallel switching capability
- tight parameter distribution
- Eoff optimized for IC =1A
Qualified according to JEDEC2 for target applications
Pb-free lead plating; RoHS compliant
Complete product spectrum and PSpice Models :
http://www.infineon.com/igbt/
Type VCE I
C Eoff Tj Marking Package
IGB01N120H2 1200V 1A 0.09mJ 150°C G01H1202 PG-TO-263-3-2
Maximum Ratings
Parameter Symbol Value Unit
Collector-emitter voltage VCE 1200 V
Triangular collector current
TC = 25°C, f = 140kHz
TC = 100°C, f = 140kHz
IC
3.2
1.3
Pulsed collector current, tp limited by Tjmax ICpuls 3.5
Turn off safe operating area
VCE 1200V, Tj 150°C
- 3.5
A
Gate-emitter voltage VGE ±20 V
Power dissipation
TC = 25°C
Ptot 28 W
Operating junction and storage temperature Tj , Tstg -40...+150
Soldering temperature (reflow soldering, MSL1) - 245
°C
2 J-STD-020 and JESD-022
G
C
E
PG-TO263-3-2
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 2 Rev. 2.4 Oct. 07
Thermal Resistance
Parameter Symbol Conditions Max. Value Unit
Characteristic
IGBT thermal resistance,
junction – case
RthJC 4.5
Thermal resistance,
junction – ambient1)
RthJA PG-TO-220-3-1 40
K/W
Electrical Characteristic, at Tj = 25 °C, unless otherwise specified
Value
Parameter Symbol Conditions
min. Typ. max.
Unit
Static Characteristic
Collector-emitter breakdown voltage V(BR)CES VGE=0V, IC=300µA 1200 - -
Collector-emitter saturation voltage VCE(sat) VGE = 15V, IC=1A
Tj=25°C
Tj=150°C
VGE = 10V, IC=1A,
Tj=25°C
-
-
-
2.2
2.5
2.4
2.8
-
-
Gate-emitter threshold voltage VGE(th) IC=30µA,VCE=VGE 2.1 3 3.9
V
Zero gate voltage collector current
ICES VCE=1200V,VGE=0V
Tj=25°C
Tj=150°C
-
-
-
-
20
80
µA
Gate-emitter leakage current IGES VCE=0V,VGE=20V - - 40 nA
Transconductance gfs VCE=20V, IC=1A - 0.75 - S
Dynamic Characteristic
Input capacitance Ciss - 91.6 -
Output capacitance Coss - 9.8 -
Reverse transfer capacitance Crss
VCE=25V,
VGE=0V,
f=1MHz - 3.4 -
pF
Gate charge QGate VCC=960V, IC=1A
VGE=15V
- 8.6 - nC
Internal emitter inductance
measured 5mm (0.197 in.) from case
LE -
7 -
nH
1) Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70µm thick) copper area for
collector connection. PCB is vertical without blown air.
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 3 Rev. 2.4 Oct. 07
Switching Characteristic, Inductive Load, at Tj=25 °C
Value
Parameter Symbol Conditions
min. Typ. max.
Unit
IGBT Characteristic
Turn-on delay time td(on) - 13 -
Rise time tr - 6.3 -
Turn-off delay time td(off) - 370 -
Fall time tf - 28 -
ns
Turn-on energy Eon - 0.08 -
Turn-off energy Eoff - 0.06 -
Total switching energy Ets
Tj=25°C,
VCC=800V,
IC=1A,
VGE=15V/0V,
RG=241,
Lσ2)=180nH,
Cσ2)=40pF
Energy losses include
“tail” and diode 3)
reverse recovery.
- 0.14 -
mJ
Switching Characteristic, Inductive Load, at Tj=150 °C
Value
Parameter Symbol Conditions
min. Typ. max.
Unit
IGBT Characteristic
Turn-on delay time td(on) - 12 -
Rise time tr - 8.9 -
Turn-off delay time td(off) - 450 -
Fall time tf - 43 -
ns
Turn-on energy Eon - 0.11 -
Turn-off energy Eoff - 0.09 -
Total switching energy Ets
Tj=150°C
VCC=800V,
IC=1A,
VGE=15V/0V,
RG=241,
Lσ2)=180nH,
Cσ2)=40pF
Energy losses include
“tail” and diode 4)
reverse recovery.
- 0.2 -
mJ
Switching Energy ZVT, Inductive Load
Value
Parameter Symbol Conditions
min. Typ. max.
Unit
IGBT Characteristic
Turn-off energy Eoff VCC=800V,
IC=1A,
VGE=15V/0V,
RG=241,
Cr
2)=1nF
Tj=25°C
Tj=150°C
-
-
0.02
0.044
-
-
mJ
2 ) Leakage inductance Lσ and stray capacity Cσ due to dynamic test circuit in figure E
4) Commutation diode from device IKP01N120H2
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 4 Rev. 2.4 Oct. 07
IC, COLLECTOR CURRENT
10Hz 100Hz 1kHz 10kHz 100kHz
0A
1A
2A
3A
4A
5A
TC=110°C
TC=80°C
IC, COLLECTOR CURRENT
1V 10V 100V 1000V
,01A
0,1A
1A
10A
200µs
DC
50µs
5µs
2µs
20µs
tp=1µs
f, SWITCHING FREQUENCY VCE, COLLECTOR-EMITTER VOLTAGE
Figure 1. Collector current as a function of
switching frequency
(Tj 150°C, D = 0.5, VCE = 800V,
VGE = +15V/0V, RG = 241)
Figure 2. Safe operating area
(D = 0, TC = 25°C, Tj 150°C)
Ptot, POWER DISSIPATION
25°C 50°C 75°C 100°C 125°C 150°C
0W
5W
10W
15W
20W
25W
30W
IC, COLLECTOR CURRENT
25°C 50°C 75°C 100°C 125°C 150°C
0A
1A
2A
3A
4A
TC, CASE TEMPERATURE TC, CASE TEMPERATURE
Figure 3. Power dissipation as a function
of case temperature
(Tj 150°C)
Figure 4. Collector current as a function of
case temperature
(VGE 15V, Tj 150°C)
Ic
Ic
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 5 Rev. 2.4 Oct. 07
IC, COLLECTOR CURRENT
0V 1V 2V 3V 4V 5V
0A
1A
2A
3A
4A
5A
12V
10V
8V
6V
VGE=15V
IC, COLLECTOR CURRENT
0V 1V 2V 3V 4V 5V 6V
0A
1A
2A
3A
4A
5A
12V
10V
8V
6V
VGE=15V
VCE, COLLECTOR-EMITTER VOLTAGE VCE, COLLECTOR-EMITTER VOLTAGE
Figure 5. Typical output characteristics
(Tj = 25°C)
Figure 6. Typical output characteristics
(Tj = 150°C)
IC, COLLECTOR CURRENT
3V 5V 7V 9V
0A
1A
2A
3A
4A
5A
Tj=+150°C
Tj=+25°C
VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE
-50°C 0°C 50°C 100°C 15C
0V
1V
2V
3V
4V
IC=2A
IC=1A
IC=0.5A
VGE, GATE-EMITTER VOLTAGE Tj, JUNCTION TEMPERATURE
Figure 7. Typical transfer characteristics
(VCE = 20V)
Figure 8. Typical collector-emitter
saturation voltage as a function of junction
temperature
(VGE = 15V)
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 6 Rev. 2.4 Oct. 07
t, SWITCHING TIMES
0A 1A 2A
10ns
100ns
1000ns
tr
td(on)
tf
td(off)
t, SWITCHING TIMES
50100150200
1ns
10ns
100ns
tr
td(on)
tf
td(off)
IC, COLLECTOR CURRENT RG, GATE RESISTOR
Figure 9. Typical switching times as a
function of collector current
(inductive load, Tj = 150°C,
VCE = 800V, VGE = +15V/0V, RG = 241,
dynamic test circuit in Fig.E)
Figure 10. Typical switching times as a
function of gate resistor
(inductive load, Tj = 150°C,
VCE = 800V, VGE = +15V/0V, IC = 1A,
dynamic test circuit in Fig.E)
t, SWITCHING TIMES
0°C 50°C 100°C 150°C
10ns
100ns
tr
td(on)
tf
td(off)
VGE(th), GATE-EMITTER THRESHOLD VOLTAGE
-50°C 0°C 50°C 100°C 150°C
0V
1V
2V
3V
4V
5V
6V
typ.
min.
max.
Tj, JUNCTION TEMPERATURE Tj, JUNCTION TEMPERATURE
Figure 11. Typical switching times as a
function of junction temperature
(inductive load, VCE = 800V,
VGE = +15V/0V, IC = 1A, RG = 241,
dynamic test circuit in Fig.E)
Figure 12. Gate-emitter threshold voltage
as a function of junction temperature
(IC = 0.03mA)
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 7 Rev. 2.4 Oct. 07
E, SWITCHING ENERGY LOSSES
0A 1A 2A 3A
0.0mJ
0.2mJ
0.4mJ
0.6mJ
Eon
1
Eoff
Ets
1
E, SWITCHING ENERGY LOSSES
50100150200
0.05mJ
0.10mJ
0.15mJ
0.20mJ
0.25mJ
Ets
1
Eon
1
Eoff
IC, COLLECTOR CURRENT RG, GATE RESISTOR
Figure 13. Typical switching energy losses
as a function of collector current
(inductive load, Tj = 150°C,
VCE = 800V, VGE = +15V/0V, RG = 241,
dynamic test circuit in Fig.E )
Figure 14. Typical switching energy losses
as a function of gate resistor
(inductive load, Tj = 150°C,
VCE = 800V, VGE = +15V/0V, IC = 1A,
dynamic test circuit in Fig.E )
E, SWITCHING ENERGY LOSSES
-40°C 25°C 100°C 150°C
0.00mJ
0.05mJ
0.10mJ
0.15mJ
0.20mJ
0.25mJ
Ets
1
Eon
1
Eoff
Eoff, TURN OFF SWITCHING ENERGY LOSS
0V/us 1000V/us 2000V/us 3000V/us
0.00mJ
0.02mJ
0.04mJ
0.06mJ
IC=0.3A, TJ=150°C
IC=0.3A, TJ=25°C
IC=1A, TJ=150°C
IC=1A, TJ=25°C
Tj, JUNCTION TEMPERATURE dv/dt, VOLTAGE SLOPE
Figure 15. Typical switching energy losses
as a function of junction temperature
(inductive load, VCE = 800V,
VGE = +15V/0V, IC = 1A, RG = 241,
dynamic test circuit in Fig.E )
Figure 16. Typical turn off switching energy
loss for soft switching
(dynamic test circuit in Fig. E)
1
) Eon and Ets include losses
due to diode recovery.
1
) Eon and Ets include losses
due to diode recovery.
1
) Eon and Ets include losses
due to diode recover
y
.
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 8 Rev. 2.4 Oct. 07
ZthJC, TRANSIENT THERMAL IMPEDANCE
1µs 10µs 100µs 1ms 10ms 100ms
10-2K/W
10-1K/W
100K/W
0.01
0.02
0.05
0.1
0.2
single pulse
D=0.5
VGE, GATE-EMITTER VOLTAGE
0nC 5nC 10nC 15nC
0V
5V
10V
15V
20V
UCE=240V
UCE=960V
tp, PULSE WIDTH QGE, GATE CHARGE
Figure 17. IGBT transient thermal
impedance as a function of pulse width
(D = tp / T)
Figure 18. Typical gate charge
(IC = 1A)
C, CAPACITANCE
0V 10V 20V 30V
10pF
100pF
Crss
Coss
Ciss
VCE, COLLECTOR-EMITTER VOLTAGE
0.0 0.2 0.4 0.6 0.8 1.0 1.2
0V
200V
400V
600V
800V
1000V
0.0A
0.2A
0.4A
0.6A
0.8A
1.0A
ICE COLLECTOR CURRENT
VCE, COLLECTOR-EMITTER VOLTAGE tp, PULSE WIDTH
Figure 19. Typical capacitance as a
function of collector-emitter voltage
(VGE = 0V, f = 1MHz)
Figure 20. Typical turn off behavior, hard
switching
(VGE=15/0V, RG=220, Tj = 150°C,
Dynamic test circuit in Figure E)
R,(K/W)
τ
, (s)
2.5069 0.00066
1.1603 0.00021
0.8327 0.00426
C1=
τ
1/R1
R1R2
C2=
τ
2/R2
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 9 Rev. 2.4 Oct. 07
VCE, COLLECTOR-EMITTER VOLTAGE
0.0 0.4 0.8 1.2 1.6 2.0
0V
200V
400V
600V
800V
1000V
0.0A
0.2A
0.4A
0.6A
0.8A
1.0A
ICE COLLECTOR CURRENT
tp, PULSE WIDTH
Figure 21. Typical turn off behavior, soft
switching
(VGE=15/0V, RG=220, Tj = 150°C,
Dynamic test circuit in Figure E)
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 10 Rev. 2.4 Oct. 07
PG-TO263-3-2
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 11 Rev. 2.4 Oct. 07
Figure A. Definition of switching times
I
rrm
90% I
rrm
10% I
rrm
di /dt
F
t
rr
I
F
i,v
t
Q
S
Q
F
t
S
t
F
V
R
di /dt
rr
Q=Q Q
rr S F
+
t=t t
rr S F
+
Figure C. Definition of diodes
switching characteristics
p(t)
12 n
T(t)
j
τ
1
1
τ
2
2
n
n
τ
T
C
rr
r
r
rr
Figure D. Thermal equivalent
circuit
Figure E. Dynamic test circuit
Leakage inductance Lσ
= 180nH,
Stray capacitor Cσ = 40pF,
Relief capacitor Cr = 1nF (only for
ZVT switching)
Figure B. Definition of switching losses
öö
VDC
DUT
(Diode)
½Lσ
RGDUT
(IGBT)
L
½Lσ
CσCr
http://store.iiic.cc/
IGB01N120H2
Power Semiconductors 12 Rev. 2.4 Oct. 07
Edition 2006-01
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 11/6/07.
All Rights Reserved.
Attention please!
The information given in this data sheet shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical
values stated herein and/or any information regarding the application of the device, Infineon Technologies
hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of
non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types
in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of such components can reasonably be expected to
cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or
system. Life support devices or systems are intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health
of the user or other persons may be endangered.
http://store.iiic.cc/