SURFACE MOUNT CRYSTAL CLOCK OSCILLATOR QSMO - 4400 Hy-Q International 1.40.2 1.00.2 6.00.2 2.0 2.0 2.0 3 4 3 3.50.2 13.5 1.00.2 4 MARKING 2 1 o21 120.0 1.50.2 1 2 1.40.2 o80 o255 1.10.2 PAD CONNECTIONS PAD 1 E/D PAD 2 GROUND PAD 3 OUT PAD 4 VDD 1.40.2 1.40.2 1.10.2 o13 1.40.2 o1.5 SUGGESTED PAD LAYOUT TOP VIEW 1.75 4.0 1.9 INFRARED RAYS REFLOW 200C 10 SEC 245C 1 to 5C/SEC 12.0 6.4 MARKING TEMPERATURE 8.0 3.9 1 to 5C/SEC 200 SEC 100C FEEDING 1 to 9C/SEC PREHEAT 0C CARRIER TAPE AND REEL DIMENSIONS 60 SEC TIME (SECONDS) SPECIFICATION QSMO-4410 SERIES NUMBER NOMINAL FREQUENCY OVERALL FREQUENCY ACCURACY OPERATING TEMPERATURE RANGE SUPPLY VOLTAGE 3.3 VOLTS 10% SUPPLY CURRENT OUTPUT DISABLED 1.8 TO 32 MHz 32 MHz TO 50 MHz OUTPUT VOLTAGE OUTPUT LOAD TRI-STATE CONTROL VIH (OUTPUT ENABLED) VIL (OUTPUT HIGH IMPEDANCE) 09 APR 1999 -10C to +70C 5 VOLTS 10% 10 A MAX 22 mA MAX 26 mA MAX 10 A MAX 25 mA MAX 35 mA MAX 10 A MAX 27 mA MAX 45 mA MAX 7 nSEC MAX 5 nSEC MAX 10 nSEC MAX (10% to 90% P-P) (0.4 V to 2.4 V) (10% to 90% P-P) SYMMETRY OUTPUT VOLTAGE = 1.4 VOLTS OUTPUT VOLTAGE = 1.5 VOLTS OUTPUT VOLTAGE = 2.5 VOLTS Hy-Q International (Australia) Pty. Ltd. 10 A MAX 12 mA MAX 16.5 mA MAX QSMO-4440 VOH 2.97 VOLTS MIN 2.4 VOLTS MIN 4.5 VOLTS MIN VOL 0.33 VOLTS MAX 0.4 VOLTS MAX 0.5 VOLTS MAX 10 LSTTL or 15pF 10 LSTTL or 15pF 10 TTL or 50pF 10 TTL RISE/FALL TIMES REF.No. 1012-0041-00-01 QSMO-4420 QSMO-4430 1.8 to 50 MHz 100ppm or 50ppm AVAILABLE 7 nSEC MAX (10% to 90%) 40% to 60% 40% to 60% 40% to 60% 2.2 VOLTS MIN OR NO CONNECTION 0.8 VOLTS MAX ALL DIMENSIONS AND TOLERANCES ARE IN mm Telephone +61 (03) 9562 8222 SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE Facsimile +61 (03) 9562 9009 E-Mail sales@hy-q.com.au