MURS120 Reverse Voltage 200 Volts Features Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as a free wheeling diode Ultrafast recovery time for high efficiency For surface mount applications Glass passivated junction High temperature soldering guaranteed: 250oC/10Seconds on terminals Mechanical Data Case: JEDEC DO-214AA (SMB) molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounce, 0.093 gram Maximum Ratings and Electrical Characteristics Rating at 25C ambient temperature unless otherwise specified. Parameter Symbols MURS120 Units Maximum repetitive peak reverse voltage VRRM 200 Volts Working peak reverse voltage VRWM 200 Volts Maximum DC blocking voltage V DC 200 Volts IF(AV) 1.0 2.0 Amps IFSM 40.0 Amps VF 0.875 0.710 Volts IR 2.0 200 0 uA uA Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A trr 25 nS Maximum reverse recovery time at IF=1.0A, di/dt=50A/us, VR=30V, Irr=10% IRM trr 35 nS Maximum forward recovery time at IF=1.0A, di/dt=100A/us, recovery to 1.0V tf r 25 Maximum average forward rectified current at (See figure 1) TL=155oC TL=145oC Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage (Note 1) o at IF=1.0A, TJ=25 C at IF=1.0A, TJ=150oC Maximum instantaneous reverse current at rated DC blocking voltage (Note 1) TJ=25oC TJ=100oC Typical thermal resistance junction to ambient Operating junction and storage temperature range Notes: 1. Pulse test: tp=300us, duty cycle < 2% RJA 13 TJ, TSTG -55 to +175 nS o C/W o C Ultrafast Plastic Rectifier Forward Current 1.0 Ampere