JMD CONNECTOR 0.5mm Emboss Tape Board-to-board connectors pitch Features------------------------ * Smooth connection Thanks to the cantilever type contacts, mating is very smooth. * Distortion preventive construction Box-shaped plug housing has the guide ribs on both ends, which prevents distortion, and offsetting the rib from the center axis provides the mating directionality. * Wide range of circuits No. of circuits available are from 20 to 100, every 10 circuiits. * Embossed taping for automatic mounting This connector is supplied in embossed tape packaging, for mounting by automatic placement machines. Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/50m max. After environmental testing/100m max. * Insulation resistance: 50M min. * Withstanding voltage: 100V AC/minute * RoHS compliant products are published. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 1 Recognized E60389 Certified LR20812 D81 JMD CONNECTOR Plug -------------------------------------------------------------------- Top entry type Side entry type C B A 2.3 0.5 0.2 0.2 4.8 C 0.5 A 2.3 B 1.15 Model No. Circuits Circuits 20 Dimensions (mm) ModelTop No.entry type Top entry type 4.5mm 1.3 5.0mm Dimensions mm(in.) A B C A B C Side entry type Side entry type 6.0mm Q'ty / Qty reel/ reel 20PS-JMDSS-G-1-TF 4.5 9.1 5.7 1,500 - 30PS-JMDSS-G-1-TF 7.0 11.6 8.2 1,500 - 40PS-JMDSS-G-1-TF 9.5 14.1 10.7 1,500 50P6.0-JMDSS-G-1-TF 50PS-JMDSS-G-1-TF 12.0 16.6 13.2 1,500 - 60P6.0-JMDSS-G-1-TF 60PS-JMDSS-G-1-TF 14.5 19.1 15.7 1,500 70P-JMDSS-G-1-TF - 70P6.0-JMDSS-G-1-TF 70PS-JMDSS-G-1-TF 17.0 21.6 18.2 1,500 80 80P-JMDSS-G-1-TF - - 80PS-JMDSS-G-1-TF 19.5 24.1 20.7 1,500 100 100P-JMDSS-G-1-TF - - 100PS-JMDSS-G-1-TF 24.5 29.1 25.7 1,500 - - 20P-JMDSS-G-1-TF 30 - 30P5.0-JMDSS-G-1-TF 40 40P-JMDSS-G-1-TF 40P5.0-JMDSS-G-1-TF 50 50P-JMDSS-G-1-TF - 60 60P-JMDSS-G-1-TF 70 Material and Finish Contact: Phosphor bronze, nickel-undercoated, gold-plated Housing: PA 6T, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. Receptacle --------------------------------------------------------------- Circuits 0.2 3.1 C A B D82 A B C Q'ty / reel 20 20R-JMDSS-G-1-TF(S) 4.5 9.1 5.7 1,500 30 30R-JMDSS-G-1-TF(S) 7.0 11.6 8.2 1,500 40 40R-JMDSS-G-1-TF(S) 9.5 14.1 10.7 1,500 50 50R-JMDSS-G-1-TF(S) 12.0 16.6 13.2 1,500 60 60R-JMDSS-G-1-TF(S) 14.5 19.1 15.7 1,500 70 70R-JMDSS-G-1-TF(S) 17.0 21.6 18.2 1,500 80 80R-JMDSS-G-1-TF(S) 19.5 24.1 20.7 1,500 100 100R-JMDSS-G-1-TF(S) 24.5 29.1 25.7 1,500 Material and Finish Contact: Phosphor bronze, nickel-undercoated, gold-plated Housing: PA 6T, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) 0.5 2.3 Dimensions (mm) Model No. 1.7 RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. JMD CONNECTOR Taping specifications ------------------------------------------------------ Feeding direction Feeding direction Cover tape leader 3802.0 Carrier tape Leader part 100min. The end part Connector 160min. mounting part 400min. (13) 20 to 50 circuits 1.750.1 1.550.05 F0.1 12.00.1 60 to 100 circuits Feeding direction 4.00.1 1.650.1 1.550.05 S0.1 W0.3 S0.1 12.00.1 12.00.1 Dimensions (mm) F S W W1 Q'ty / reel 20 7.5 -- 16.0 17.5 1,500 30 11.5 -- 24.0 25.5 1,500 40 11.5 -- 24.0 25.5 1,500 50 11.5 -- 24.0 25.5 1,500 60 14.2 28.4 32.0 32.0 1,500 70 14.2 28.4 32.0 32.0 1,500 80 20.2 40.4 44.0 44.0 1,500 100 20.2 40.4 44.0 44.0 1,500 Circuits PC board layout (viewed from component side) ------ 0.30.05 0.50.03 1.55 Note: 1. Specifications conform to JIS C 0806. The tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. Note: 2. Specifications are subject to change without prior notice. Assembly layout --------------------- Top entry type 0.85 Plug: top entry type Receptacle ( )P-JMDSS-G-1-TF : 4.5 ( )P5.0-JMDSS-G-1-TF : 5.0 ( )P6.0-JMDSS-G-1-TF : 6.0 4.3 1.4 2.9 5.8 Receptacle (5.6) 0.5 0.85 1.55 Carrier tape F0.1 1.550.05 F0.1 4.00.1 2.00.1 1.750.1 Feeding direction 60 to 100 circuits Cover tape Carrier tape Cover tape W0.3 12.00.1 1.750.1 F0.1 20 to 50 circuits Feding direction 4.00.1 1.650.1 1.750.1 1.550.05 W0.3 4.00.1 2.00.1 Plug: side entry type 2.00.5 W0.3 W1+2.5 -1.0 Plug: top entry type Receptacle Feeding direction 0.50.03 0.30.05 Side entry type Plug: side entry type 1.35 3.05 5.6 1.4 2.6 1.35 4.8 Note: 1. Tolerances are non-cumulative: -0.03mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. D83 JMD CONNECTOR Plug with polarizing key ---------------------------------------------------- Stacking height /4.5mm A B C Q'ty / reel 60 60P-JMDHS-GAN-1A-TF (A) 14.5 19.1 15.7 1,500 C Circuit No.1 mark Circuit No.1 Dimensions (mm) Model No. Circuits Material and Finish Contact: Phosphor bronze, nickel-underplated, gold-plated (nickel-stripe) Housing: PA6T, UL94V-0, gray Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. This products listed above are supplied on embossed-tape. 0.2 0.5 2.3 A B Receptacle with polarizing key ---------------------------------------------- C Circuit No.1 mark Circuit No.1 Dimensions (mm) Model No. Circuits Stacking height /4.5mm A B C Q'ty / reel 60 60R-JMDHS-GAN-1A-TF (SA) 14.5 19.1 15.7 1,500 Material and Finish Contact: Phosphor bronze, nickel-underplated, gold-plated (nickel-stripe) Housing: PA6T, UL94V-0, gray Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. This products listed above are supplied on embossed-tape. 0.2 3.1 C 0.5 2.3 A B D84 1.7 JMD CONNECTOR Taping specifications / with polarizing key Feeding direction Feeding direction Cover tape leader 380 2.0 3802.0 Carrier tape The end part Connector mounting part 160min. (13) Leader part 100min. 400min. 2.0 0.5 32.0+2.5 -1.0 Plug Receptacle 14.20.1 1.550.05 1.750.1 4.00.1 2.00.1 14.20.1 1.550.05 32.0 2.00.1 32.0 4.00.1 Circuit No.1 1.750.1 Feeding direction Feeding direction Circuit No.1 12.00.1 Cover tape Carrier tape Cover tape 12.00.1 Carrier tape Note: 1. Specifications conform to JIS C 0806. The tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. PC board layout (viewed from component side) / with polarizing key------------------- Receptacle 0.50.03 0.30.05 1.550.1 0.850.1 1.40.1 0.850.1 2.9 1.550.1 1.40.1 0.30.05 2.9 5.8 0.50.03 5.6 Plug Note: 1. Tolerances are non-cumulative: -0.03mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. Assembly layout / with polarizing key ---------------------------------------- 0.5 4.3 4.5 Top entny type D85