D81
Features––––––––––––––––––––––––
• Smooth connection
Thanks to the cantilever type contacts, mating is very smooth.
• Distortion preventive construction
Box-shaped plug housing has the guide ribs on both ends,
which prevents distortion, and offsetting the rib from the center
axis provides the mating directionality.
• Wide range of circuits
No. of circuits available are from 20 to 100, every 10 circuiits.
• Embossed taping for automatic mounting
This connector is supplied in embossed tape packaging, for
mounting by automatic placement machines.
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/50m Ωmax.
After environmental testing/100m Ωmax.
• Insulation resistance: 50M Ωmin.
• Withstanding voltage: 100V AC/minute
* RoHS compliant products are published.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
JMD CONNECTOR
Board-to-board connectors
0.5mm
pitch
Emboss Tape
JMD CONNECTOR
D82
Plug ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Receptacle –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
0.2
B
A
C
2.3
0.5
0.2
1.15 1.3
4.8
B
A
C
0.5
2.3
Top entry type
B
A
2.3 1.7
0.5
C
3.1
0.2
Side entry type
Circuits Model No. Dimensions mm(in.)
AB
Q´ty /
reel
20
30
40
50
60
70
80
100
4.5
7.0
9.5
12.0
14.5
17.0
19.5
24.5
9.1
11.6
14.1
16.6
19.1
21.6
24.1
29.1
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
20P-JMDSS-G-1-TF
–
40P-JMDSS-G-1-TF
50P-JMDSS-G-1-TF
60P-JMDSS-G-1-TF
70P-JMDSS-G-1-TF
80P-JMDSS-G-1-TF
100P-JMDSS-G-1-TF
–
30P5.0-JMDSS-G-1-TF
40P5.0-JMDSS-G-1-TF
–
–
–
–
–
–
–
–
50P6.0-JMDSS-G-1-TF
60P6.0-JMDSS-G-1-TF
70P6.0-JMDSS-G-1-TF
–
–
Top entry type Side entry type
20PS-JMDSS-G-1-TF
30PS-JMDSS-G-1-TF
40PS-JMDSS-G-1-TF
50PS-JMDSS-G-1-TF
60PS-JMDSS-G-1-TF
70PS-JMDSS-G-1-TF
80PS-JMDSS-G-1-TF
100PS-JMDSS-G-1-TF
C
Circuits
Model No. Dimensions (mm)
AB
Q'ty /
reel
Top entry type Side entry type C
5.7
8.2
10.7
13.2
15.7
18.2
20.7
25.7
Material and Finish
Contact: Phosphor bronze, nickel-undercoated, gold-plated
Housing: PA 6T, UL94V-0
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
4.5mm 5.0mm 6.0mm
RoHS compliance This product displays (LF)(SN) on a label.
Note: The products listed above are supplied on embossed-tape.
BC
Q'ty /
reel
9.1
11.6
14.1
16.6
19.1
21.6
24.1
29.1
5.7
8.2
10.7
13.2
15.7
18.2
20.7
25.7
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
Cir-
cuits
Dimensions (mm)
20
30
40
50
60
70
80
100
A
4.5
7.0
9.5
12.0
14.5
17.0
19.5
24.5
Model No.
20R-JMDSS-G-1-TF(S)
30R-JMDSS-G-1-TF(S)
40R-JMDSS-G-1-TF(S)
50R-JMDSS-G-1-TF(S)
60R-JMDSS-G-1-TF(S)
70R-JMDSS-G-1-TF(S)
80R-JMDSS-G-1-TF(S)
100R-JMDSS-G-1-TF(S)
Material and Finish
Contact: Phosphor bronze, nickel-undercoated, gold-plated
Housing: PA 6T, UL94V-0
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
RoHS compliance This product displays (LF)(SN) on a label.
Note: The products listed above are supplied on embossed-tape.
0.5 4.3
4.8
5.6
( )P-JMDSS-G-1-TF : 4.5
( )P5.0-JMDSS-G-1-TF : 5.0
( )P6.0-JMDSS-G-1-TF : 6.0
Feeding direction
(
φ
13)
W1+2.5
–1.0
Feeding direction
1.75±0.1
Feeding direction
1.75±0.1
Carrier tape
Cover tape
Feeding direction
1.75±0.1
φ
1.55±0.05
Feding direction
1.75±0.1
F±0.1
W±0.3
Carrier tapeCover tape
F±0.1
W±0.3
F±0.1
S±0.1
W±0.3
F±0.1
S±0.1
W±0.3
Feeding direction
Cover tape leaderCarrier tape
The end part
160min.
Connector
mounting part
400min.
Leader part
100min.
φ
380±2.0
2.0±0.5
2.0±0.1 φ
1.55±0.05
4.0±0.1
12.0±0.1
4.0±0.1
12.0±0.1
2.0±0.1
φ
1.55±0.05
4.0±0.1 1.65±0.1 φ
1.55±0.05
12.0±0.1
4.0±0.1 1.65±0.1
12.0±0.1
Plug: top entry type
Receptacle
20 to
50 circuits
60 to 100
circuits
20 to
50 circuits
60 to 100
circuits
Plug: side entry type
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Assembly layout–––––––––––––––––––––
0.5±0.03 0.3±0.05 1.55 0.85
1.4
2.9
5.8 Receptacle (5.6)
0.85 1.55 0.3±0.05
0.5±0.03
1.35 1.35
2.63.05
1.4
Plug: side entry type
PC board layout
(viewed from component side)
––––––
Note: 1. Specifications conform to JIS C 0806. The tape width, connector
loading recess square hole dimensions, etc. are determined by the
number of circuits and external shape of the connector to be loaded.
Note: 2. Specifications are subject to change without prior notice.
Plug: top entry type
Receptacle
Top entry type
Side entry type
JMD CONNECTOR
D83
Note:
1. Tolerances are non-cumulative:
–
0.03mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
D84
0.2
B
A
C
Circuit No.1 mark
Circuit No.1
2.3
0.5
0.2
B
A
2.3 1.7
0.5
C
C
3.1
Circuit No.1 mark
Circuit No.1
BC
Q'ty /
reel
1,500
19.1 15.714.5
Cir-
cuits
Dimensions (mm)
60
A
Model No.
60R-JMDHS-GAN-1A-TF (SA)
Material and Finish
Contact: Phosphor bronze, nickel-underplated, gold-plated (nickel-stripe)
Housing: PA6T, UL94V-0, gray
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
Stacking height /4.5mm
BC
Q'ty /
reel
19.1 15.7 1,500
Cir-
cuits
Dimensions (mm)
60
A
14.5
Model No.
60P-JMDHS-GAN-1A-TF (A)
Material and Finish
Contact: Phosphor bronze, nickel-underplated, gold-plated (nickel-stripe)
Housing: PA6T, UL94V-0, gray
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
Stacking height /4.5mm
Plug with polarizing key ––––––––––––––––––––––––––––––––––––––––––––––––––––
Receptacle with polarizing key ––––––––––––––––––––––––––––––––––––––––––––––
RoHS compliance This product displays (LF)(SN) on a label.
This products listed above are supplied on embossed-tape.
RoHS compliance This product displays (LF)(SN) on a label.
This products listed above are supplied on embossed-tape.
JMD CONNECTOR
D85
4.3
4.5
0.5
2.9
5.8
0.5±0.03 0.3±0.05 1.55±0.1 0.85±0.1
1.4±0.1
2.9
5.6
0.5±0.03 0.3±0.05 1.55±0.1 0.85±0.1
1.4±0.1
Note: 1. Tolerances are non-cumulative:
–
0.03mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
32.0+2.5
–1.0
φ
380 ±2.0
2.0
Feeding direction
±0.5
380±2.0
(
φ
13)
Feeding direction
Cover tape leaderCarrier tape
The end part
160min.
Connector
mounting part 400min.
Leader part
100min.
Feeding direction
Circuit No.1
32.0
Carrier tape
Cover tape
φ
1.55±0.05
2.0±0.1
12.0±0.1
4.0±0.1
1.75±0.1
14.2±0.1
Feeding direction
2.0±0.1 φ
1.55±0.05
4.0±0.1
1.75±0.1
CircuitNo.1
12.0±0.1
14.2±0.1
32.0
Carrier tape
Cover tape
Note: 1. Specifications conform to JIS C 0806. The tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and
external shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.
Taping specifications / with polarizing key
PC board layout (viewed from component side) / with polarizing key–––––––––––––––––––
Assembly layout / with polarizing key ––––––––––––––––––––––––––––––––––––––––
ReceptaclePlug
ReceptaclePlug
Top entny type
JMD CONNECTOR