L135-U450003500000 - Lumileds

ILLUMINATION

No. E352519

FEATURES AND BENEFITS PRIMARY APPLICATIONS

Industry standard package enables drop-in replacement for

existing 3535 packages Architectural & Entertainment

Single die and single source architecture for optical control Lamps

Common focal length with LUXEON Rebel and LUXEON Z Color LEDs – Color Tunable Illumination

Full color palette for a wider spectrum range Specialty Lighting

– Emergency Vehicle

– Signage

LUXEON 3535L

Color Line

Color LEDs that deliver the perfect amount

of color you need. No More. No less.

The LUXEON 3535L Color Line enables a new era of color lighting. This

robust color line provides high performance and is targeted at cost

eective designs. Complemented by a broad range of white oerings, the

LUXEON 3535L Color Line enables RGBW applications. This product line

extends the comprehensive LUXEON Color Family.

Table of Contents

General Product Information ......................................................................2

Product Test Conditions ..............................................................................2

Part Number Nomenclature ..........................................................................2

Lumen Maintenance .................................................................................2

Environmental Compliance ...........................................................................2

Performance Characteristics ......................................................................3

Product Selection Guide..............................................................................3

Optical Characteristics ...............................................................................3

Electrical and Thermal Characteristics..................................................................4

Absolute Maximum Ratings .......................................................................4

Characteristic Curves .............................................................................5

Spectral Power Distribution Characteristics .............................................................5

Light Output Characteristics ..........................................................................5

Forward Current Characteristics.......................................................................8

Radiation Pattern Characteristics ......................................................................9

Product Bin and Labeling Denitions ..............................................................10

Decoding Product Bin Labeling.......................................................................10

Luminous Flux Bins .................................................................................11

Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Dominant Wavelength Bins ..........................................................................12

Peak Wavelength Bins...............................................................................12

Color Bin Denitions ................................................................................13

Forward Voltage Bins ...............................................................................14

Mechanical Dimensions..........................................................................14

Reow Soldering Guidelines ......................................................................15

JEDEC Moisture Sensitivity ...........................................................................15

Solder Pad Design ..................................................................................16

Packaging Information...........................................................................16

Pocket Tape Dimensions ............................................................................16

Reel Dimensions ...................................................................................17

General Product Information

Product Test Conditions

LUXEON 3535L Color Line LEDs are tested and binned with a 20ms monopulse of 100mA at a junction temperature, Tj, of 25ºC.

Part Number Nomenclature

Part numbers for LUXEON 3535L Color Line follow the convention below:

L 1 3 5 – A A A A 0 0 3 5 0 0 0 0 B

Where:

A A A A – designates color (R625=Red, O615=Red Orange, A589=PC Amber, L567=Lime, G525=Green, B475=Blue,

U450=Royal Blue)

B – designates a Lumileds internal code (either 0 or 1)

Therefore, the following part number is used for a Red LUXEON 3535L:

L 1 3 5 – R 6 2 5 0 0 3 5 0 0 0 0 0

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3535L

Color Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,

namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the

following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or

polybrominated diphenyl ethers (PBDE).

Performance Characteristics

Product Selection Guide

Table 1. Product performance of LUXEON 3535L Color Line at 100mA, Tj=25ºC.

COLOR

DOMINANT or

PEAK WAVELENGTH [1] (nm)

LUMINOUS FLUX [2] (lm) or

RADIOMETRIC POWER [3] (mW) PART

NUMBER

MINIMUM MAXIMUM MINIMUM TYPICAL

Red 620 630 10.0 13.5 L135-R625003500000

Red-Orange 610 620 13.0 15.5 L135-O615003500000

PC Amber – – 24.0 35.0 L135-A589003500000

Lime – – 44.0 56.0 L135-L567003500000

Green 520 540 21.0 35.0 L135-G525003500000

Blue 469 480 8.2 11.0 L135-B475003500000

Royal Blue 440 455 130 155 L135-U450003500000

Notes for Table 1:

1. Lumileds maintains a tolerance of ±1nm on dominant wavelength measurements. PC Amber and Lime are binned by chromaticity coordinates. Royal Blue is binned by peak wavelength.

All other colors are binned by dominant wavelength.

2. Lumileds maintains a tolerance of ±7.5% on luminous ux measurements.

3. Royal Blue is binned by radiometric power. All other colors are binned by luminous ux.

Optical Characteristics

Table 2. Optical characteristics for LUXEON 3535L Color Line at 100mA, Tj=25ºC.

COLOR PART NUMBER

TYPICAL SPECTRAL

HALF-WIDTH [1]

(nm)

TYPICAL TEMPERATURE

COEFFICIENT OF DOMINANT

WAVELENGTH (nm/°C)

TYPICAL TOTAL

INCLUDED ANGLE [2]

TYPICAL

VIEWING ANGLE [3]

Red L135-R625003500000 20 0.04 140° 115°

Red-Orange L135-O615003500000 20 0.07 140° 115°

PC Amber L135-A589003500000 95 0.01 140° 115°

Lime L135-L567003500000 110 0.01 140° 115°

Green L135-G525003500000 35 0.04 140° 115°

Blue L135-B475003500000 25 0.04 140° 115°

Royal Blue L135-U450003500000 25 0.04 140° 115°

Notes for Table 2:

1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity

2. Total angle at which 90% of total luminous ux is captured.

3. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3. Electrical and thermal characteristics for LUXEON 3535L Color Line at 100mA, Tj=25ºC.

COLOR PART NUMBER

FORWARD VOLTAGE [1] (V) TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE [2] (mV/°C)

TYPICAL THERMAL

RESISTANCE — JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM TYPICAL MAXIMUM

Red L135-R625003500000 1.75 2.10 2.50 -2.0 20

Red-Orange L135-O615003500000 1.75 2.10 2.50 -1.7 20

PC Amber L135-A589003500000 2.80 3.05 3.50 -1.7 25

Lime L135-L567003500000 2.80 3.05 3.50 -1.7 25

Green L135-G525003500000 2.50 3.20 3.50 -3.0 42

Blue L135-B475003500000 2.50 3.00 3.50 -2.5 35

Royal Blue L135-U450003500000 2.50 3.05 3.50 -2.5 35

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.

2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4. Absolute maximum ratings for LUXEON 3535L Color Line.

PARAMETER RED AND

RED-ORANGE

PC AMBER

AND LIME GREEN BLUE AND

ROYAL BLUE

DC Forward Current [1,2] 125mA 200mA 200mA 200mA

Peak Pulsed Forward Current [1,3] 300mA 240mA 300mA 480mA

LED Junction Temperature [1] (DC & Pulse) 125°C 125°C 115°C 125°C

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2 Class 2 Class 2 Class 2

Operating Case Temperature [1] 105°C 105°C 95°C 95°C

LED Storage Temperature -40°C to 105°C -40°C to 105°C -40°C to 95°C -40°C to 95°C

Soldering Temperature JEDEC 020c 260°C

Allowable Reow Cycles 3

Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current

3. At 10% duty cycle with pulse width of 10ms.

Characteristic Curves

Spectral Power Distribution Characteristics

Light Output Characteristics

Figure 1. Typical normalized power vs. wavelength for LUXEON 3535L Color Line at 100mA, Tj=25°C.

Figure 2a. Typical normalized light output vs. junction temperature for LUXEON 3535L Red, Red-Orange,

PC Amber, Lime, Blue, Green at 100mA.

Figure 2b. Typical normalized light output vs. junction temperature for LUXEON 3535L Royal Blue at 100mA.

Figure 3a. Typical normalized light output vs. forward current for LUXEON 3535L PC Amber, Lime and Blue at Tj=25°C.

Figure 3c. Typical normalized light output vs. forward current for LUXEON 3535L Royal Blue at Tj=25°C.

Figure 3b. Typical normalized light output vs. forward current for LUXEON 3535L Red, Red-Orange, Green at Tj=25°C.

Forward Current Characteristics

Figure 4. Typical forward current vs. forward voltage for LUXEON 3535L Color Line at Tj=25°C.

Radiation Pattern Characteristics

Figure 5. Typical radiation pattern for LUXEON 3535L Color Line at 100mA, Tj=25°C.

Figure 6. Typical polar radiation pattern for LUXEON 3535L Color Line at 100mA, Tj=25°C.

Product Bin and Labeling Denitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

LUXEON 3535L Red, Red-Orange, Green, Blue and Royal Blue LEDs are labeled using a 3-digit alphanumeric CAT code following the

format below:

A B C

Where:

A – designates luminous ux bin (example: L=32.0 to 36.0 lumens, R=48.0 to 52.0 lumens)

B – designates radiometric bin (example: B, C, D, E, F, G, H) or dominant/peak wavelength bin (example: 1, 2, 3, 4, 5)

C – designates forward voltage bin (example: C=2.00 to 2.25V, G=3.00 to 3.25V)

Therefore, a Red-Orange LUXEON 3535L LED with a lumen range of 15.0 to 17.0, dominant wavelength range of 610 to 620nm

and a forward voltage range of 2.00 to 2.25V has the following CAT code:

E 2 C

LUXEON 3535L PC Amber and Lime LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C D

Where:

A – designates luminous ux bin (example: L=32.0 to 36.0 lumens, R=48.0 to 52.0 lumens)

B C – designates color bin (example: A0, L0 or L1)

D – designates forward voltage bin (example: W=3.00 to 3.10V, Z=3.30 to 3.50V)

Therefore, a Lime LUXEON 3535L LED with a lumen range of 32.0 to 36.0, color bin of L0 and a forward voltage range of 3.00 to

3.10V has the following CAT code:

L L 0 W

Luminous Flux Bins

Table 5 lists the standard luminous ux bins for LUXEON 3535L Color Line emitters. Although several bins are outlined, product

availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ux bin denitions for LUXEON 3535L Color Line, at Tj=25°C.

BIN LUMINOUS FLUX [1] (lm)

MINIMUM MAXIMUM

A 8.2 10.0

B 10.0 11.5

C 11.5 13.0

D 13.0 15.0

E 15.0 17.0

F 17.0 19.0

G 19.0 21.0

H 21.0 24.0

J 24.0 28.0

K 28.0 32.0

L 32.0 36.0

M 36.0 40.0

P 40.0 44.0

Q 44.0 48.0

R 48.0 52.0

S 52.0 56.0

T 56.0 60.0

V 60.0 65.0

W 65.0 70.0

Notes for Table 5:

1. Lumileds maintains a tolerance of ±7.5% on luminous ux measurements.

Radiometric Power Bins

Table 6. Radiometric power bin denitions for LUXEON 3535L Color Line.

BIN RADIOMETRIC POWER [1] (mW)

MINIMUM MAXIMUM

B 130 140

C 140 150

D 150 160

E 160 170

F 170 180

G 180 190

H 190 200

Notes for Table 6:

1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.

Dominant Wavelength Bins

Table 7. Dominant wavelength bin denitions for LUXEON 3535L Red, Red-Orange, Green and Blue.

COLOR PART NUMBER BIN DOMINANT WAVELENGTH [1] (nm)

MINIMUM MAXIMUM

Red L135-R625003500000 4 620 630

Red-Orange L135-O615003500000 2 610 620

Green L135-G525003500000

1 520 525

2 525 530

3 530 535

4 535 540

Blue L135-B475003500000 3 469 475

4 475 480

Notes for Table 7:

1. Lumileds maintains a tolerance of ±1nm on dominant wavelength measurements.

Peak Wavelength Bins

Table 8. Peak wavelength bin denitions for LUXEON 3535L Royal Blue.

COLOR PART NUMBER BIN PEAK WAVELENGTH [1] (nm)

MINIMUM MAXIMUM

Royal Blue L135-U450003500000

3 440 445

4 445 450

5 450 455

Notes for Table 8:

1. Lumileds maintains a tolerance of ±0.5nm on peak wavelength measurements.

Color Bin Denitions

Table 9. Color bin denitions for LUXEON 3535L PC Amber and Lime.

COLOR PART NUMBER BIN x y

PC Amber L135-A589003500000 A0

0.5622 0.4372

0.5843 0.4152

0.5705 0.4111

0.5499 0.4249

Lime L135-L567003500000

0.3927 0.5007

0.4287 0.5697

0.4327 0.5655

0.3972 0.4986

0.3773 0.5076

0.3927 0.5007

0.4287 0.5697

0.4150 0.5833

Notes for Table 9:

1. Lumileds maintains a tolerance of ±0.01 on x and y coordinates in the CIE 1931 color space.

0.4

0.405

0.41

0.415

0.42

0.425

0.43

0.435

0.44

0.445

0.45

0.54 0.55 0.56 0.57 0.58 0.59

CIE1931y

CIE1931x

BinA0

Figure 7. Color Bin Structure for

LUXEON 3535L PC Amber for Table 9.

0.48

0.5

0.52

0.54

0.56

0.58

0.6

0.35 0.37 0.39 0.41 0.43 0.45 0.47

CIE 1931 y

CIE 1931 x

Bin L1

Bin L0

Figure 8. Color Bin Structure for

LUXEON 3535L Lime for Table 9.

Forward Voltage Bins

Table 10a. Forward voltage bin denitions for LUXEON 3535L Red, Red-Orange, Green, Blue and Royal Blue.

BIN FORWARD VOLTAGE [1] (Vf)

MINIMUM MAXIMUM

A 1.50 1.75

B 1.75 2.00

C 2.00 2.25

D 2.25 2.50

E 2.50 2.75

F 2.75 3.00

G 3.00 3.25

H 3.25 3.50

Table 10b. Forward voltage bin denitions for LUXEON 3535L PC Amber and Lime.

BIN FORWARD VOLTAGE [1] (Vf)

MINIMUM MAXIMUM

T 2.80 2.90

V 2.90 3.00

W 3.00 3.10

X 3.10 3.20

Y 3.20 3.30

Z3.30 3.50

Notes for Tables 10a and 10b:

1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.

Mechanical Dimensions

Notes for Figure 9:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. Tolerance of ±0.1mm.

Figure 9. Mechanical dimensions for LUXEON 3535L Color Line.

Reow Soldering Guidelines

Table 11. Reow prole characteristics for LUXEON 3535L Color Line.

PROFILE FEATURE LEAD-FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C

Preheat Time (tsmin to tsmax) 60 to 120 seconds

Ramp-Up Rate (TL to Tp) 3°C / second maximum

Liquidus Temperature (TL) 217°C

Time Maintained Above Temperature TL (tL) 10 to 30 seconds

Peak / Classication Temperature (Tp) 260°C

Time Within 5°C of Actual Temperature (tp) 30 seconds

Ramp-Down Rate (Tp to TL) 6°C / second maximum

Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 12. Moisture sensitivity levels for LUXEON 3535L Color Line.

LEVEL FLOOR LIFE SOAK REQUIREMENTS STANDARD

TIME CONDITIONS TIME CONDITIONS

2 1 Year ≤30°C / 60% RH 168 Hours +5 / -0 ≤85°C / 60% RH

Figure 10. Visualization of the acceptable reow temperature prole as specied in Table 11.

Solder Pad Design

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 11. Recommended PCB solder pad layout for LUXEON 3535L Color Line.

0.82 1.02

1.93 2.13

0.65

0.25 0.30

0.50

2.40

2.60

1.80

Solder mask

Stencil

Top copper

Package geometric center

Packaging Information

Pocket Tape Dimensions

Notes for Figure 12:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. Empty components pockets sealed with top cover tape.

Figure 12. Pocket Tape dimensions for LUXEON 3535L Color Line.

Reel Dimensions

Notes for Figure 13:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. Empty component pockets sealed with top cover tape.

4. 329 mm reel — 5000 pieces per reel.

5. Minimum packing quantity is 5000 pieces.

6. The maximum number of consecutive missing LEDs is two.

7. In accordance with EIA-481-1-B specication.

Figure 13. Reel dimensions for LUXEON 3535L Color Line.

DS146 LUXEON 3535L Color Line

Product Datasheet 20181021

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aliates

warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding

B.V. and its aliates reserve the right to make changes without notice. You as user agree to this disclaimer and

user agreement with the download or use of the provided materials, information and data. A listing of Lumileds

product/patent coverage may be accessed at lumileds.com/patents.

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry rsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver dierentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world better, safer, more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Lumileds:

L135-L567L00000001 L135-A589A00000001 L135-B475003500001 L135-G525003500001 L135-O615003500001

L135-R625003500001 L135-G525003500000 L135-O615003500000 L135-U450003500000 L135-R625003500000

L135-B475003500000 L135-A589003500000 L135-L567L00000000