T-1 3/4 (5mm) SOLID STATE LAMP Part Number: WP7113SEC/J4-AMT Super Bright Orange Features z High reliability LED package. z Low power consumption. z Popular T-1 3/4 diameter package. z General purpose leads. Description z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z RoHS compliant. The Orange source color devices are made with AlGaInP Light Emitting Diode. Applications z Traffic signaling. z Backlighting (illuminated advertising , general lighting). z Interior and exterior automotive lighting. z Substitution of micro incandescent lamps. z Reading lamps. z Signal and symbol luminaire for orientation. z Marker lights (e.g. Steps, exit ways, etc). z Decorative and entertainment lighting. Package Dimensions z Indoor and outdoor commercial and residential architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 1 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664 Selection Guide Part No. Dice WP7113SEC/J4-AMT Super Bright Orange (AlGaInP) Iv (mcd) [2] @ 20mA Lens Type Viewing Angle [1] Code. Min. Max. ZH 9000 11000 ZM 11000 14000 ZN 14000 18000 Water Clear 21/2 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at Ta=25C Parameter Symbol Value Unit Power dissipation PD 140 mW Reverse Voltage VR 5 V Junction temperature TJ 120 C Operating Temperature Top -40 To +100 C Storage Temperature Tstg -40 To +120 C IF 50 mA IFM 150 mA 3000 V 350 C/W DC Forward Current[1] Peak Forward Current [2] Electrostatic Discharge Threshold (HBM) Thermal Resistance (Junction/ambient) [1] Rth j-a Lead Solder Temperature [3] 260C For 3 Seconds Lead Solder Temperature [4] 260C For 5 Seconds Notes: 1. Rth(j-a) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. 2mm below package base. 4. 5mm below package base. SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 2 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664 Electrical / Optical Characteristics at Ta=25C Parameter Wavelength at peak emission IF=20mA [Typ.] Symbol Value Unit peak 611 nm Dominant Wavelength IF=20mA [Min.] dom [1] 600 nm Dominant Wavelength IF=20mA [Max.] dom [1] 610 nm 17 nm Spectral bandwidth at 50% REL MAX IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] VF [2] 2.2 V 2.8 Reverse Current (VR = 5V) [Max.] IR 10 uA Temperature coefficient of peak IF=20mA, -10 C T105 C [Typ.] TC peak 0.14 nm/ C Temperature coefficient of dom IF=20mA, -10 C T105 C [Typ.] TC dom 0.04 nm/ C Temperature coefficient of VF IF=20mA, -10 C T105 C [Typ.] TCV -2.0 mV/ C Notes: 1.The dominant Wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward Voltage: +/-0.1V. ORANGE SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 3 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664 Super Bright Orange WP7113SEC/J4-AMT SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 4 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664 WP7113SEC/J4-AMT Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 5 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664 PACKING & LABEL SPECIFICATIONS WP7113SEC/J4-AMT SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 6 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards Test Times / Number of Cycles Damaged Test Condition 1 Continuous operating test - Ta =25C ,IF = maximum rated current* 1,000 h 0 / 22 2 High Temp. operating test EIAJ ED4701/100(101) Ta = 100C IF = maximum rated current* 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40C, IF = maximum rated current* 1,000 h 0 / 22 4 High temp. storage test EIAJ EDTa = maximum rated storage temperature 4701/100(201) 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED4701/100(202) Ta = -40C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJ ED4701/100(103) Ta = 60C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJ ED4701/100(102) Ta = 60C, RH = 90% IF = maximum rated current* 1,000 h 0 / 22 8 Soldering reliability test EIAJ ED4701/100(301) Moisture soak : 30C,70% RH, 72h Preheat : 150~180C(120s max.) Soldering temp : 260C(10s) 3 times 0 / 18 9 Thermal shock operating test - Ta = -40C(15min) ~ 100C(15min) IF = derated current at 100C 1,000 cycles 0 / 22 10 Thermal shock test - Ta = -40C(15min) ~ maximum rated storage temperature(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJ ED4701/100(304) C = 100pF , R2 = 1.5K V = 3000V Once each Polarity 0 / 22 12 Vibration test - a = 196m/s , f = 100~2KHz , t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram Failure Criteria Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value Spec.Max.Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 7 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664 SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 8 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664 SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 9 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664