SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 1 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664
T-1 3/4 (5mm) SOLID STATE LAMP
Part Number: WP7113SEC/J4-AMT
Super Bright Orange
Package Dimensions
Features
zHigh reliability LED package.
zLow power consumption.
zPopular T-1 3/4 diameter package.
zGeneral purpose leads.
zReliable and rugged.
zLong life - solid state reliability.
zAvailable on tape and reel.
zRoHS compliant. Applications
zTraffic signaling.
zBacklighting (illuminated advertising , general lighting).
zInterior and exterior automotive lighting.
zSubstitution of micro incandescent lamps.
zReading lamps.
zSignal and symbol luminaire for orientation.
zMarker lights (e.g. Steps, exit ways, etc).
zDecorative and entertainment lighting.
zIndoor and outdoor commercial and residential
architectural lighting.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
Description
The Orange source color devices are made with AlGaInP
Light Emitting Diode.
SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 2 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664
Selection Guide
Notes:
1. Rth(j-a) Results from mounting on PC board FR4 (pad size≥16 mm2 per pad),
2. 1/10 Duty Cycle, 0.1ms Pulse Width.
3. 2mm below package base.
4. 5mm below package base.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Code. Min. Max. 2θ1/2
WP7113SEC/J4-AMT Super Bright Orange (AlGaInP) Water Clear 20°
ZH 9000 11000
ZM 11000 14000
ZN 14000 18000
Parameter Symbol Value Unit
Power dissipation PD 140 mW
Reverse Voltage VR 5 V
Junction temperature TJ 120 °C
Operating Temperature Top -40 To +10 0 °C
Storage Temperature Ts tg -40 To + 1 2 0 °C
DC Forward Current[1] IF 50 mA
Peak Forward Current [2] IFM 150 mA
Electrostatic Discharge Threshold (HBM) 3000 V
Thermal Resistance (Junction/ambient) [1] Rth j-a 350 °C/W
Lead Solder Temperature [3] 260°C For 3 Seconds
Lead Solder Temperature [4] 260°C For 5 Seconds
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at Ta=25°C
SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 3 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664
Electrical / Optical Characteristics at Ta=25°C
Notes:
1.The dominant Wavelength (λ d) above is the setup value of the sorting machine. (Tolerance λ d : ±1nm. )
2. Forward Voltage: +/-0.1V.
Parameter Symbol Value Unit
Wavelength at peak emission IF=20mA [Typ.] λpeak 611 nm
Dominant Wavelength IF=20mA [Min.] λ dom [1] 600 nm
Dominant Wavelength IF=20mA [Max.] λ dom [1] 610 nm
Spectral bandwidth at 50%ΦREL MAX IF=20mA [Typ.] Δλ 17 nm
Forward Voltage IF=20mA [Min.]
VF [2]
-
V
Forward Voltage IF=20mA [Typ.] 2.2
Forward Voltage IF=20mA [Max.] 2.8
Reverse Current (VR = 5V) [Max.] IR 10 uA
Temperature coefficient of λpeak
IF=20mA, -10 °C≤ T≤105 °C [Typ.] TC λpeak 0.14 nm/°C
Temperature coefficient of λdom
IF=20mA, -10 °C≤ T≤105 °C [Typ.] TC λdom 0.04 nm/°C
Temperature coefficient of VF
IF=20mA, -10 °C≤ T≤105 °C [Typ.] TCV -2.0 mV/°C
ORANGE
SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 4 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664
Super Bright Orange WP7113SEC/J4-AMT
SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 5 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664
WP7113SEC/J4-AMT
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 6 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664
PACKING & LABEL SPECIFICATIONS WP7113SEC/J4-AMT
SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 7 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below
Lot Tolerance Percent Defective (LTPD) : 10%
No. Test Item Standards Test Condition Test Times /
Cycles
Number of
Damaged
1 Continuous operating test - Ta =25°C ,IF = maximum rated current* 1,000 h 0 / 22
2 High Temp. operating test EIAJ ED-
4701/100(101) Ta = 100°C IF = maximum rated current* 1,000 h 0 / 22
3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current* 1,000 h 0 / 22
4 High temp. storage test EIAJ ED-
4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22
5 Low temp. storage test EIAJ ED-
4701/100(202) Ta = -40°C 1,000 h 0 / 22
6 High temp. & humidity storage test EIAJ ED-
4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22
7 High temp. & humidity operating test EIAJ ED-
4701/100(102)
Ta = 60°C, RH = 90%
IF = maximum rated current* 1,000 h 0 / 22
8 Soldering reliability test EIAJ ED-
4701/100(301)
Moisture soak : 30°C,70% RH, 72h
Preheat : 150~180°C(120s max.)
Soldering temp : 260°C(10s)
3 times 0 / 18
9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)
IF = derated current at 100°C 1,000 cycles 0 / 22
10 Thermal shock test - Ta = -40°C(15min) ~ maximum rated
storage temperature(15min) 1,000 cycles 0 / 22
11 Electric Static Discharge (ESD) EIAJ ED-
4701/100(304) C = 100pF , R2 = 1.5KΩ V = 3000V Once each
Polarity 0 / 22
12 Vibration test - a = 196m/s² , f = 100~2KHz ,
t = 48min for all xyz axes 4 times 0 / 22
* : Refer to forward current vs. derating curve diagram
Items Symbols Conditions Failure Criteria
luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5
Forward Voltage VF IF = 20mA Testing Max. Value ≥Spec.Max.Value x 1.2
Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥Spec.Max.Value x 2.5
High temp. storage test - - Occurrence of notable decoloration, deformation
and cracking
Failure Criteria
SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 8 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664
SPEC NO: DSAL3999 REV NO: V.1 DATE: NOV/22/2010 PAGE: 9 OF 9
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101029664
