TOSHIBA TC4011BP/BF/BFN/BFT TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC4011BP, TC4011BF, TC4011BFN, TC4011BFT TC4011B QUAD 2 INPUT NAND GATE (Note) The JEDEC SOP (FN) is not available in Japan. The TC4011B respectively. minimum. ig 2-input positive logic NAND gate Since all the outputs of these gates are provided with the inverters as buffers, the input/output characteristics have been improved and the variation of propagation delay time due to the increase in load capacity is kept down to the P (DIP14-P-300-2.54) Weight : 0.96g (Typ.) F (SOP14-P-300-1.27) Weight : 0.18g (Typ.) a 14 << _ RE 1 FN (SOL14-P-150-1.27) FT (TSSOP14-P-0044-0.65) Weight : 0.129 (Typ.) Weight : 0.06g (Typ.) MAXIMUM RATINGS PIN ASSIGNMENT (TOP VIEW) ; CHARACTERISTIC SYMBOL RATING UNIT DC Su pply Voltage Vpp Vs5 -0.5~V55 + 20 Vv Input Voltage Vin Veg -0.5~Vpp + 0.5 V Output Voltage Vout Vsg 0.5~Vpp + 0.5 V DC Input Current lin +10 mA Power Dissipation Pp 300 (DIP) / 180 (SOIC) mw Operating Temperature _an~ Range Topr 40~85 Cc Storage Temperature ~ Range Tstg - 65 150 Cc LOGIC DIAGRAM X=AB d>e x Al B1 X1 X2 B2 A2 Vs5 2001-05-17TOSHIBA TC4011BP/BF/BFN/BFT RECOMMENDED OPERATING CONDITIONS (Vss = 0V) CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT DC Supply Voltage Vop 3 18 Vv Input Voltage Vin 0 _ Vop Vv STATIC ELECTRICAL CHARACTERISTICS (Vss = 0V) SYM- 40C 25C 85C CHARACTERISTIC | 2G) | TEST CONDITION [Vop UNIT (vy | MIN. | MAX.| MIN. | TYP. | MAX. | MIN. | MAX. 51 495| | 495] 500/ | a95[ aoe tage | YOH Nour] <A 10! 9.95] | 995 ]1000} | 995] urpur vorag IN= ss VDD 1514.95 | |1495 |15.00| |1495| | | 5| | 005 | | 000/005 | | 0.05 el tae Vou Vout] <1HA 101 | 005 | | o00| 005 | | 0.05 P g INT NSS DD 15} | 0.05 | | 0.00 | 0.05 | | 0.05 Vou= 4.6V 5/-061;| |-051/-10] | -o42) Vou= 2.5V 5/-2.50] |-2.10}-40] | -1.70/ cut High low | Voy= 9.5V 10/-1.50| |-1.30]-22] | -1..0] 4 Vou = 13.5V 15/-4.00| |-3.40]-90 | | -280] Vin=Vss, V IN SS DD mA Vo. = 0.4V 5 o61/ | 051] 12/ | oa2] Output Low | Vo, = 0.5V 10/ 1.50} | 130} 32] | 110} Current OL | Vo = 1.5V 15| 400} | 340] 120] | 280] Vin =Vpp Voyr = 0.5V 5 35] 35/275] 35] Input High y,,_ | Vour=1.0V 10| 70}; 70 | 550} 70! Voltage 4] Vour = 1.5V 15| 11.0} 11.0 | 825 | 1.0]; | lout| <A V Vour = 4.5V 5) 15| | 225] 15] 1.5 Input Low y, | Vour= 9.0V 10) 30/ | 450} 30] 3.0 Voltage | Vout = 13.5V 15; 40| | 675| 40/ 4.0 | lout | <1yuA Input |"H"Level | ty | Vin = 18V 18) o1/ | w-5/ o1f 1.0 Current |"L" Level | 1, | Vv, =0V 181 | -01/ |-10-5/-01]/ | -1.0 Quiescent Suppl 5] | 025| Joo] o25/ 7.5 | uA Curent PPYY | too | Viv=Vssy Vo 101 | 0.50| |0.001] o50|/ | 15.0 u 15| | 1.00| |0.002] 1.00} | 30.0 * All valid input combinations. 2 2001-05-17TOSHIBA TC4011BP/BF/BFN/BFT DYNAMIC ELECTRICAL CHARACTERISTICS (Ta = 25C, Vss=O0V, C, = 50pF) CHARACTERISTIC SYMBOL] TEST CONDITION Vop(V) MIN. TYP. MAX. UNIT 5 70 200 Output Transition Time try 10 35 100 15 30 80 5 70 200 Output Transition Time tra 10 35 100 15 30 80 ns 5 65 200 Propagation Delay Time ton 10 30 100 15 25 80 5 65 200 Propagation Delay Time tou 10 30 100 15 25 80 Input Capacitance Cin 5 7.5 pF CIRCUIT AND WAVEFORM FOR MEASUREMENT OF DYNAMIC CHARACTERISTICS CIRCUIT WAVEFORM 20ns 20ns INPUT tru try P.G. > 90% OUTPUT 50% 10% teu | tei 3 2001-05-17TOSHIBA TC4011BP/BF/BFN/BFT DIP 14PIN PACKAGE DIMENSIONS (DIP14-P-300-2.54) Unit in mm o 14 8 3 ee) a) a) | a a a a 19.75MAX 19,25+0.2 Weight : 0.96g (Typ.) Unit in mm SOP 14PIN (200mil BODY) PACKAGE DIMENSIONS (SOP14-P-300-1.27) 14 GB _ HHHHEHE a 9 al = So a] & els bp on 2 cd HHER oS | 1 7 1.34TYP 0.43+0.1 10.25) OI ny 4 0.15*345 0.820.2 Weight : 0.18g (Typ.) 4 2001-05-17TOSHIBA TC4011BP/BF/BFN/BFT SOP 14PIN (150mil BODY) PACKAGE DIMENSIONS (SOL14-P-150 -1.27) Unit in mm (Note) This package is not available in Japan. 14 a RHHBRHEE a] 3 a] 6 oO o HH BEE | 1 7 9.515TYP 0.4210.07 paras 8.65+0.1 a foot z 45 _* sr r= 3 3 0.720.3 Weight : 0.12g (Typ.) TSSOP 14PIN (170mil BODY) PACKAGE DIMENSIONS (TSSOP14-P-0044-0.65) Unit in mm Hanpane 44x 64A+G.2 { 7 0.08 0.55TYP foes) || 024897 pe {ee Of falo.13 @ 5.26MAX | 5.0204 \ Ln 1.00.05 1.2MAX 0.1+0.05 40.025 0.45~0.75 Weight : 0.06g (Typ.) 5 2001-05-17TOSHIBA TC4011BP/BF/BFN/BFT RESTRICTIONS ON PRODUCT USE 000707EBA @ TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the Handling Guide for Semiconductor Devices, or TOSHIBA Semiconductor Reliability Handbook etc.. @ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (Unintended Usage). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. @ The products described in this document are subject to the foreign exchange and foreign trade laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 6 2001-05-17