AMC DOC. #: AMC78L05_D (LF) March 2004 AMC78L05 ADD MICROTECH CORP. 100mA / 3-TERMINAL 5V REGULATOR DESCRIPTION FEATURES The AMC78L05 is a 3-terminal positive regulator with a fixed output voltage of 5V. Although it is designed as a fixed-voltage regulator, the output voltage can be increased by the use of a simple voltage divider. This regulator can provide local on card regulation, eliminating the distribution problems associated with single point regulation. In addition, it can be used with power-pass elements to make high-current voltage regulators with 100mA output current. Protection features such as thermal shutdown and current limiting have been designed internally which will protect the device from damage in case of overload or overheating. 5% tolerance of output voltage Wide input range Output current > 100mA Internal thermal overload protection No External Components Short circuit protection Available in 3L plastic TO-92, surface mount SOT-89 and plastic 8 pin S.O.I.C. Identical pin assignment to earlier 78L05 series. APPLICATIONS PACKAGE PIN OUT Logic Systems Computer Add-On Cards Monitors Power Suppliers INPUT INPUT GND GND OUTPUT OUTPUT 3-Pin Plastic TO-92 (Top View) 3-Pin Plastic SOT-89 Surface Mount (TOP View) Output GND INPUT GND GND NC GND NC 8-Pin S.O.I.C Surface Mount (Top View) TA (OC) Note: LP TO-92 3-pin ORDER INFORMATION SO-8 DM 8-pin PK SOT-89 3-pin 0 to 70 AMC78L05LP(SnPb) AMC78L05DM(SnPb) AMC78L05PK(SnPb) 0 to 70 AMC78L05LPF(Lead Free) AMC78L05DMF(Lead Free) AMC78L05PKF(Lead Free) 1. All surface-mount and TO-92 packages are available in Tape & Reel. Append the letter "T" to part number (i.e. AMC78L05LPT, AMC78L05DMT or AMC78L05PKT). 2. For TO-92 in Tape & Box (without reel), add suffix "TB" (i.e. AMC78L05LPTB) 3. The letter "F" is marked for Lead Free process . Copyright 2002, ADD Microtech Corp. 1 www.addmtek.com AMC78L05 AMC DOC. #: AMC78L05_D (LF) March 100mA / 3-TERMINAL 5V REGULATOR 2004 ABSOLUTE MAXIMUM RATINGS (Note 1) 30V Input Voltage 150 OC Maximum junction operating temperature, TJ Storage temperature range -65OC to 150OC Lead temperature (soldiering, 10 seconds) 260 OC Note 1: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents are positive into, negative out of the specified terminal. Package JA ( C/W ) O POWER DISSIPATION TABLE TA=70 OC Derating factor ( mW/OC ) TA 25 OC O TA 25 C Power rating(mW) Power rating(mW) TA= 85 OC Power rating (mW) DM 165 6.06 757 485 DMF 165 6.06 757 485 LP 156 6.41 801 513 LPF 156 6.41 801 513 PK 71(note) 14.1 1763 1128 PKF 71(note) 14.1 1763 1128 Note : 1.For PK package, Thermal Resistance-Junction to Tab ( JT ) = 35 OC/W. TJ = TTAB + (PD x JT). PD: Power Dissipation. 2.JA: Thermal Resistance-Junction to Ambient Junction Temperature Calculation: TJ = TA + (PD x JA). The JA numbers are guidelines for the thermal performance of the device/PC-board system. All of the above assume no ambient airflow. RECOMMENDED OPERATING CONDITIONS Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Input Voltage VI 7 20 Output Current IOUT 100 Operating Virtual Junction Temperature TJ 0 125 Copyright 2002, ADD Microtech Corp. 2 394 394 417 417 916 916 Units V mA O C www.addmtek.com AMC78L05 AMC DOC. #: AMC78L05_D (LF) March 100mA / 3-TERMINAL 5V REGULATOR 2004 ELECTRICAL CHARACTERISTICS Unless otherwise specified, these specifications in bold type apply over the operating temperature range of 0OC TJ +150OC, VIN = 10V, IOUT = 40mA,CIN = 0.33F, COUT= 0.1F, and are for DC characteristics only. (Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) AMC78L05 Parameter Symbol Test Conditions Units Min. Typ. Max. Output Voltage VOUT Line Regulation VOI Load Regulation VOL Peak Output Current Dropout Voltage Quiescent Current Ripple Rejection ( note 1 ) Output Noise Voltage ( note 1 ) IPEAK IQ RR TJ = 25 OC 7V VIN 20V, 1mA IOUT 40mA 1mA IOUT 70mA 7V VIN 20V,TJ = 25 OC 8V VIN 20V,TJ = 25 OC 1mA IOUT 100mA, TJ = 25 OC 1mA IOUT 40mA, TJ = 25 OC TJ = 25 OC TJ = 25 OC 4.8 4.75 4.75 f =120Hz, 8V VIN 16V, TJ = 25 OC 10Hz f 100KHz, TJ = 25 OC 47 5.0 18 10 20 5 140 1.7 3 62 40 5.2 5.25 5.25 75 54 60 30 2.0 5 VO RMS Note 1: These parameters, although guaranteed, are not 100% tested in production prior to shipment. V mV mV mA V mA dB V Typical Applications OUTPUT INPUT OUTPUT INPUT AMC78L05 AMC78L05 0.33F 0.33F 0.1F R1 IQ 0.1F R2 Fig. 1. Fixed Output Regulator - capacitors are required if the regulator is far away from the power supply filter. Fig. 2. Adjustable Output Regulator - VOUT = 5V + (5V/R1 +IQ)R2 INPUT AMC78L05 R1 0.33F OUTPUT IOUT Fig. 3. Current Regulator: IOUT = (VOUT /R1) + IQ Copyright 2002, ADD Microtech Corp. 3 www.addmtek.com AMC78L05 AMC DOC. #: AMC78L05_D (LF) March 100mA / 3-TERMINAL 5V REGULATOR 2004 3-Pin Plastic TO-92 INCHES B MILLIMETERS K M MIN A TYP MAX MIN TYP MAX A 0.175 0.180 0.205 4.45 4.57 5.21 B 0.170 0.180 0.210 4.32 4.57 5.33 C 0.125 0.142 0.165 3.18 3.62 4.19 G F C N F - 0.015 - - 0.38 - G - 0.050 - - 1.27 - J - 0.150 - - 3.81 - 0.500 0.580 - 12.70 14.73 - K Note: For TO-92 in tape and reel, refer to TO-92 package and carrier dimension data for lead dimensions. M - 5 - - 5 - N - 5 - - 5 - 3-Pin Plastic TO-92 Package (Taped and Reeled) and Carrier Dimensions P P1 INCHES MIN TYP MAX MIN TYP MAX - - 2.00 - - 0.480 0.500 0.520 12.2 12.7 13.2 Po 0.488 0.500 0.512 12.4 12.7 13.0 Do 0.150 0.157 0.165 3.8 4.0 4.2 P1 0.230 0.250 0.256 5.85 6.35 6.85 Fo 0.165 0.197 0.220 4.2 5.0 5.6 W 0.669 0.709 0.748 17.0 18.0 19.0 Ho 0.610 0.630 0.649 15.5 16.0 16.5 Wo 0.224 0.236 0.248 5.7 6.0 6.3 W1 0.335 0.354 0.374 8.5 9.0 9.5 C C 0.079 Ho W1 P Wo W F1 Do Po Fo MILLIMETERS Note: For 3L TO92, 2,000 units per Reel Copyright 2002, ADD Microtech Corp. 4 www.addmtek.com AMC78L05 AMC DOC. #: AMC78L05_D (LF) March 100mA / 3-TERMINAL 5V REGULATOR 2004 8-Pin Plastic S.O.I.C. INCHES MIN TYP MAX MIN TYP MAX A 0.183 - 0.202 4.65 - 5.13 B 0.144 - 0.163 3.66 - 4.14 C 0.068 - 0.074 1.73 - 1.88 D 0.010 - 0.020 0.25 - 0.51 F - 0.035 0.38 - 0.89 A B P F D G C SEATING PLAN M K 0.015 G L J Note: for 8 pin S.O.I.C., 100 units per tube MILLIMETERS 0.050 BSC 1.27 BSC J 0.007 - 0.010 0.19 - 0.25 K 0.005 - 0.010 0.13 - 0.25 L 0.189 - 0.205 4.80 - 5.21 M - - 8 - - 8 P 0.228 - 0.244 5.79 - 6.20 3-Pin Surface Mount SOT-89 INCHES A C D L B K N E M F J G H MIN TYP MAX MIN TYP MAX A 0.173 - 0.181 4.39 - 4.59 B 0.090 - 0.102 2.28 - 2.59 C 0.055 - 0.063 1.39 - 1.60 D 0.015 - 0.017 0.38 - 0.43 E 0.084 - 0.090 2.13 - 2.28 F 0.016 - 0.019 0.33 - 0.48 G 0.059 BSC 1.49 BSC H 0.118 BSC 2.99 BSC J 0.018 - 0.022 0.45 - 0.55 K 0.155 - 0.167 3.94 - 4.24 L 0.067 - 0.072 1.70 - 1.82 M 0 - 8 0 - 8 - 0.047 0.89 - 1.19 N 0.035 Copyright 2002, ADD Microtech Corp. 5 MILLIMETERS www.addmtek.com AMC78L05 AMC DOC. #: AMC78L05_D (LF) March 100mA / 3-TERMINAL 5V REGULATOR 2004 IMPORTANT NOTICE ADD Microtech (ADDM) reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or environmental damage. ADDM integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of ADDM products in such applications is understood to be fully at the risk of the customer. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. ADDM assumes to no liability to customer product design or application support. ADDM warrants the performance of its products to the specifications applicable at the time of sale. U.S. Asia Pacific region ADD Microtech Inc. 492 Altamont Drive Milpitas, CA 95035 ADD Microtech Corp 13F, NO. 287, Sec. 3, Nan Jing E. Rd., Taipei, Taiwan 105 T E L : (408) 9410420 F A X : (408) 9410864 T E L : 2-27132800 F A X : 2-27132805 Copyright 2002, ADD Microtech Corp. 6 www.addmtek.com