SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23
5000 SERIES - MINIATURE TOGGLE SWITCHES
FEATURES
MATERIALS
Contacts & Terminals: Gold plated brass, silver or gold plated silver
Actuator: Chrome plated brass
Bushing: Nickel plated brass
Housing: Stainless steel or tin plated steel
Case: Diallyl phthalate (DAP)
Terminal seal: Epoxy
Hardware: Panel mounting models supplied with 2 Hex Nuts .314" (8mm) across flats,
1 Locking Ring & 1 Lockwasher. See hardware section of catalog.
SPECIFICATIONS
Contact ratings (resistive loads): Gold plated brass; 0.4 Volt-Amps max. at 20 V max.
Silver; 3 Amps at 250 VAC, 6 Amps at 125 VAC or 4 Amps at 30 VDC
Gold plated silver; 3 Amps at 250 VAC, 6 Amps at 125 VAC or 4 Amps at 30
VDC. Gold plating withstands up to 100 mA at 30 VDC.
Initial contact resistance: 10 milliohms maximum
Insulation resistance: 1000 megohms min. at 500 VDC
Dielectric strength: 1000 V rms min. - between terminals
1500 V rms min. - between poles and terminals and frame
Electrical life: Gold: 100,000 cycles min.
Silver (at full load): SP & DP - 50,000 cycles min. 3P: 40,000 cycles min.
4P: 30,000 cycles min.
Operating temperature range: -40°C to +85°C
ABOUT THIS SERIES
The material in this series is organized in the following sequence:
a. Completely specified switch models:
Panel mounting
Panel and/or p.c. mounting
P.C. mounting
b. 'build your own switch' order format
c. Option drawings & special options
d. Panel cut-outs & miscellaneous
AGENCY RECOGNITION
UL, CSA, CECC, LNZ, GAM T1, QPL (Europe), MUAHAG, NATO. Availability: Consult factory for
details of recognized models. Marking: To order switches marked UL, CSA or CECC, complete the
appropriate box of the ordering format. Other listings do not appear on the switches.
● Broadest selection offered in miniature switches.
● SPDT, DPDT, 3PDT & 4PDT models with numerous options.
● Numerous configurations for panel, panel & p.c. and p.c. mounting.
● Extensive agency recognition (see below).
ALSO IN THIS SERIES
5000 Series switches for peak currents -
for switching power supplies, DC-DC
converters, motors, etc. See specifications
on last page of completely specified models.
VDE approved 5000 Series models -
see 55000 Series following.
A23-A40 10/6/00, 6:39 AM23
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
A24
5000 SERIES - MINIATURE TOGGLE SWITCHES
MODEL NO. CIRCUIT
5636AB ON - ON
5639AB ON OFF ON
5637AB MOM OFF MOM
5638AB ON OFF MOM
5632AB ON - MOM
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected
Single pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5646AB ON - ON
5649AB ON OFF ON
5647AB MOM OFF MOM
5648AB ON OFF MOM
5642AB ON - MOM
5644THAB* ON ON ON
5644TH1RAB* ON ON MOM
5644TH2RAB* MOM ON MOM
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
* Function 4: SP in DP case. see diagram at end of section
Double pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5656AB ON - ON
5659AB ON OFF ON
5657AB MOM OFF MOM
5658AB ON OFF MOM
5652AB ON - MOM
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
Three pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5666AB ON - ON
5669AB ON OFF ON
5667AB MOM OFF MOM
5668AB ON OFF MOM
5662AB ON - MOM
5664THAB* ON ON ON
5664TH1RAB* ON ON MOM
5664TH2RAB* MOM ON MOM
Handle position III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
11-12 10-11
* Function 4: SP in DP case. see diagram at end of section.
Four pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals -silver contacts
(.039)(.039)
1.001.00
10.5010.50
(.413)(.413) (.314)(.314)
8.008.00
(.031)(.031)
0.800.80
(.019)(.019)
0.500.50
2424
(.118 DIA)(.118 DIA)
3.00 DIA3.00 DIA
(.070)(.070)
1.801.80
(.519)(.519)
13.2013.20
7.007.00
(.275)(.275)
(.185)(.185)
4.704.70
(.472)(.472)
12.0012.00 (.145)(.145)
3.703.70
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
II
IIII
IIIIII
33
22
11
EPOXYEPOXY
13.2013.20
(.519)(.519)
2424
3.00 DIA3.00 DIA
(.118 DIA)(.118 DIA)
1.801.80
4.754.75
(.070)(.070)
(.187)(.187)
4.704.70
(.185)(.185)
0.800.80
(.031)(.031)
8.008.00
(.314)(.314)
(.413)(.413)
10.5010.50
3.703.70
(.145)(.145)
0.500.50
(.019)(.019)
12.0012.00
(.472)(.472)
1.001.00
(.039)(.039)
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.472)(.472)
12.0012.00
IIIIII
IIII
II
11
22
3366
55
44
EPOXYEPOXY
2424
(.519)(.519)
13.2013.20
(.118 DIA)(.118 DIA)
3.00 DIA3.00 DIA
(.070)(.070)
1.801.80
10.5010.50
(.413)(.413) (.314)(.314)
8.008.00
(.039)(.039)
1.001.00
(.019)(.019)
0.500.50
(.031)(.031)
0.800.80
(.145)(.145)
3.703.70
(.516)(.516)
13.1013.10
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
(.649)(.649)
16.5016.50
(.187)(.187)
4.754.75
IIIIII
IIII
II33
22
1177
88
99
(.185)(.185)
4.704.70
EPOXYEPOXY
13.2013.20
1.801.80
3.00 DIA3.00 DIA
(.519)(.519)
(.070)(.070)
(.118 DIA)(.118 DIA)
3.703.70
(.145)(.145)
0.800.80
(.031)(.031) 0.500.50
(.019)(.019)
13.1013.10
(.516)(.516)
1.001.00
(.039)(.039)
8.008.00
(.314)(.314)
(.413)(.413)
10.5010.50
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
(.834)(.834)
21.2021.20
(.187)(.187)
4.754.75
2424
IIIIII
IIII
II
4.704.70
(.185)(.185)
1212
1111
1010
77
88
99
EPOXYEPOXY
Keyway
Keyway
Keyway
Keyway
A23-A40 10/6/00, 6:40 AM24
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A25
5000 SERIES - MINIATURE TOGGLE SWITCHES
MODEL NO. CIRCUIT
5636AB9 ON - ON
5639AB9 ON OFF ON
5637AB9 MOM OFF MOM
5638AB9 ON OFF MOM
5632AB9 ON - MOM
Handle position
(see dwg.) :III II I
Terminals
connected 2-3 1-2
Single pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5646AB9 ON - ON
5649AB9 ON OFF ON
5647AB9 MOM OFF MOM
5648AB9 ON OFF MOM
5642AB9 ON - MOM
5644THAB9* ON ON ON
5644TH1RAB9* ON ON MOM
5644TH2RAB9* MOM ON MOM
Handle position: III II I
Terminals 2-3 1-2
connected: 5-6 4-5
* Function 4: SP in DP case. see diagram at end of section.
Double pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5656AB9 ON - ON
5659AB9 ON OFF ON
5657AB9 MOM OFF MOM
5658AB9 ON OFF MOM
5652AB9 ON - MOM
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
Three pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5666AB9 ON - ON
5669AB9 ON OFF ON
5667AB9 MOM OFF MOM
5668AB9 ON OFF MOM
5662AB9 ON - MOM
5664THAB9* ON ON ON
5664TH1RAB9* ON ON MOM
5664TH2RAB9* MOM ON MOM
Handle position III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
11-12 10-11
* Function 4: SP in DP case. see diagram at end of section.
Four pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
(.039)(.039)
1.001.00
(.314)(.314)
8.008.00
(.031)(.031)
0.800.80
(.019)(.019)
0.500.50
2424
(.070)(.070)
1.801.80
(.519)(.519)
13.2013.20
7.007.00
(.275)(.275)
(.185)(.185)
4.704.70
(.472)(.472)
12.0012.00 (.145)(.145)
3.703.70
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
II
IIII
IIIIII
33
22
11
(.196 DIA)(.196 DIA)
(.448)(.448)
5.00 DIA5.00 DIA
11.4011.40 EpoxyEpoxy
(.100)(.100)
2.542.54
13.2013.20
(.519)(.519)
1.801.80
4.754.75
(.070)(.070)
(.187)(.187)
4.704.70
(.185)(.185)
0.800.80
(.031)(.031)
3.703.70
(.145)(.145)
0.500.50
(.019)(.019)
12.0012.00
(.472)(.472)
(.472)(.472)
12.0012.00
11
22
3366
55
44
IIIIII
IIII
II
2424
1.001.00
(.039)(.039)
11.4011.40
5.00 DIA5.00 DIA
(.448)(.448)
(.196 DIA)(.196 DIA)
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
8.008.00
(.314)(.314)
2.542.54
(.100)(.100)
EpoxyEpoxy
(.519)(.519)
13.2013.20
(.070)(.070)
1.801.80
(.019)(.019)
0.500.50
(.031)(.031)
0.800.80
(.145)(.145)
3.703.70
(.516)(.516)
13.1013.10
(.649)(.649)
16.5016.50
(.187)(.187)
4.754.75
33
22
1177
88
99
(.185)(.185)
4.704.70
(.100)(.100)
2.542.54
(.039)(.039)
1.001.00
2424
II
IIII
IIIIII
(.314)(.314)
8.008.00
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
(.196 DIA)(.196 DIA)
(.448)(.448)
5.00 DIA5.00 DIA
11.4011.40
EpoxyEpoxy
13.2013.20
1.801.80
(.519)(.519)
(.070)(.070)
3.703.70
(.145)(.145)
0.800.80
(.031)(.031)
0.500.50
(.019)(.019)
13.1013.10
(.516)(.516)
(.834)(.834)
21.2021.20
(.187)(.187)
4.754.75
4.704.70
(.185)(.185)
1212
1111
1010
77
88
99
11.4011.40
5.00 DIA5.00 DIA
(.448)(.448)
(.196 DIA)(.196 DIA)
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
8.008.00
(.314)(.314)
IIIIII
IIII
II
2424
1.001.00
(.039)(.039)
2.542.54
(.100)(.100)
EpoxyEpoxy
Keyway
Keyway
Keyway
Keyway
A23-A40 10/6/00, 6:40 AM25
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
A26
5000 SERIES - MINIATURE TOGGLE SWITCHES
MODEL NO. CIRCUIT
5236ZA ON - ON
5239ZA ON OFF ON
5237ZA MOM OFF MOM
5238ZA ON OFF MOM
5232ZA ON - MOM
Handle position
(see dwg.) :III II I
Terminals
connected: 2-3 1-2
Single pole - standard actuator - 1/4-40 threaded bushing - quick connect terminals - silver contacts
MODEL NO. CIRCUIT
5246ZA ON - ON
5249ZA ON OFF ON
5247ZA MOM OFF MOM
5248ZA ON OFF MOM
5242ZA ON - MOM
5244THZA* ON ON ON
5244TH1RZA* ON ON MOM
5244TH2RZA* MOM ON MOM
Handle position III II I
Terminals 2-3 1-2
connected: 5-6 4-5
* Function 4: SP in DP case. see diagram
at end of section.
Double pole - standard actuator - 1/4-40 threaded bushing - quick connect terminals - silver contacts
MODEL NO. CIRCUIT
5636MAB ON - ON
5639MAB ON OFF ON
5637MAB MOM OFF MOM
5638MAB ON OFF MOM
5632MAB ON - MOM
Handle position
(see dwg.) :III II I
Terminals
connected: 2-3 1-2
Single pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5646MAB ON - ON
5649MAB ON OFF ON
5647MAB MOM OFF MOM
5648MAB ON OFF MOM
5642MAB ON - MOM
5644MTHAB* ON ON ON
5644MTH1RAB* ON ON MOM
5644MTH2RAB* MOM ON MOM
Handle position III II I
Terminals 2-3 1-2
connected: 5-6 4-5
* Function 4: SP in DP case. see diagram
at end of section.
Double pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts
1.801.80
4.754.75
(.070)(.070)
(.187)(.187)
4.704.70
(.185)(.185)
11.9011.90
11.0011.00
17.5017.50
(.688)(.688) (.468)(.468)
(.433)(.433)
2424
3.703.70
(.145)(.145)
0.500.50
(.019)(.019)
0.800.80
(.031)(.031)
(.519)(.519)
13.2013.20
12.0012.00
(.472)(.472)
5.00 DIA5.00 DIA
11.9 DIA-32UNS11.9 DIA-32UNS
(15/32-32UNS)(15/32-32UNS)
(.196 DIA)(.196 DIA)
IIIIII
IIII
II
11
22
3366
55
44
(.031)(.031)
0.800.80
(.019)(.019)
0.500.50
(.070)(.070)
1.801.80
(.185)(.185)
4.704.70
(.145)(.145)
3.703.70
2424
(.433)(.433)
(.468)(.468)(.688)(.688)
(.196 DIA)(.196 DIA)
(15/32-32UNS)(15/32-32UNS)
13.2013.20
(.519)(.519)
(.275)(.275)
7.007.00
11.9 DIA-32UNS11.9 DIA-32UNS
17.5017.50
11.0011.00
11.9011.90
5.00 DIA5.00 DIA
IIIIII
IIII
II
33
22
11
Keyway
Keyway
Keyway
Keyway
(.519)(.519)
13.2013.20
7.007.00
(.275)(.275) 1.001.00
(.039)(.039)
13.1013.10
(.515)(.515)
2424
8.008.00
(.314)(.314)
(.413)(.413)
10.5010.50
0.780.78 4.704.70
5.305.30
(.208)(.208)
(.030)(.030) (.185)(.185)
1.571.57
(.061)(.061)
EPOXYEPOXY
112233
II
IIII
IIIIII
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.118 DIA)(.118 DIA)
3.00 DIA3.00 DIA
3.00 DIA3.00 DIA
(.118 DIA)(.118 DIA)
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
13.2013.20
(.519)(.519)
12.0012.00
(.472)(.472)
10.5010.50
(.413)(.413) (.314)(.314)
8.008.00
2424
(.515)(.515)
13.1013.10
(.039)(.039)
1.001.00
(.185)(.185)
(.030)(.030)
(.187)(.187)
(.208)(.208)
5.305.30
4.704.70
0.780.78
4.754.75
(.061)(.061)
1.571.57
EPOXYEPOXY
112233
II
IIII
IIIIII
Epoxy terminal
seal is standard
on these models.
Epoxy terminal
seal is standard
on these models.
A23-A40 10/6/00, 6:40 AM26
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A27
5000 SERIES - MINIATURE TOGGLE SWITCHES
MODEL NO. CIRCUIT
5656MAB ON - ON
5659MAB ON OFF ON
5657MAB MOM OFF MOM
5658MAB ON OFF MOM
5652MAB ON - MOM
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
Three pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5666MAB ON - ON
5669MAB ON OFF ON
5667MAB MOM OFF MOM
5668MAB ON OFF MOM
5662MAB ON - MOM
5664MTHAB* ON ON ON
5664MTH1RAB* ON ON MOM
5664MTH2RAB* MOM ON MOM
Handle position III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
11-12 10-11
* Function 4: SP in DP case. see diagram at end of section.
Four pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5636AKB ON - ON
5639AKB ON OFF ON
5637AKB MOM OFF MOM
5638AKB ON OFF MOM
5632AKB ON - MOM
Handle position
(see dwg.) :III II I
Terminals
connected: 2-3 1-2
Single pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5646AKB ON - ON
5649AKB ON OFF ON
5647AKB MOM OFF MOM
5648AKB ON OFF MOM
5642AKB ON - MOM
5644THAKB* ON ON ON
5644TH1RAKB* ON ON MOM
5644TH2RAKB* MOM ON MOM
Handle position: III II I
Terminals 2-3 1-2
connected: 5-6 4-5
* Function 4: SP in DP case. see diagram
at end of section.
Double pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts
13.2013.20
(.519)(.519)
2424
3.00 DIA3.00 DIA
(.118 DIA)(.118 DIA)
1.801.80
4.754.75
(.070)(.070)
(.187)(.187)
4.704.70
(.185)(.185)
0.800.80
(.031)(.031)
8.008.00
(.314)(.314)
(.413)(.413)
10.5010.50
3.703.70
(.145)(.145)
0.500.50
(.019)(.019)
12.0012.00
(.472)(.472)
1.001.00
(.039)(.039)
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.472)(.472)
12.0012.00
IIIIII
IIII
II
11
22
3366
55
44
(.070)(.070)
1.801.80
(.019)(.019)
0.500.50
(.031)(.031)
0.800.80
(.145)(.145)
3.703.70
(.187)(.187)
4.754.75
2424
(.468)(.468)(.688)(.688)
17.5017.50 11.9011.90
(.476)(.476)
16.5016.50
(.649)(.649)
12.1012.10
5.00 DIA5.00 DIA
11.9 DIA-32UNS11.9 DIA-32UNS
(15/32-32UNS)(15/32-32UNS)
(.196 DIA)(.196 DIA)
II
IIII
IIIIII
33
22
11
13.2013.20
(.519)(.519)
77
88
99
(.185)(.185)
4.704.70
1.801.80
(.070)(.070)
(.187)(.187)
4.754.75
5.00 DIA5.00 DIA
11.9 DIA-32UNS11.9 DIA-32UNS
(15/32-32UNS)(15/32-32UNS)
(.196 DIA)(.196 DIA)
12.1012.10
(.476)(.476)
11.9011.9017.5017.50
(.688)(.688) (.468)(.468)
2424
3.703.70
(.145)(.145)
0.800.80
(.031)(.031) 0.500.50
(.019)(.019)
21.2021.20
(.834)(.834)
II
IIII
IIIIII
(.519)(.519)
13.2013.20
11
22
33
4.704.70
(.185)(.185)
1212
1111
1010
(.039)(.039)
1.001.00
10.5010.50
(.413)(.413) (.314)(.314)
8.008.00
(.031)(.031)
0.800.80
(.019)(.019)
0.500.50
2424
(.118 DIA)(.118 DIA)
3.00 DIA3.00 DIA
(.070)(.070)
1.801.80
(.519)(.519)
13.2013.20
7.007.00
(.275)(.275)
(.185)(.185)
4.704.70
(.472)(.472)
12.0012.00
(.145)(.145)
3.703.70
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
II
IIII
IIIIII
33
22
11
Keyway
Keyway
Keyway
Keyway
Epoxy terminal
seal is standard
on these models.
Epoxy
terminal
seal is
standard
on these
models.
Epoxy terminal
seal is standard
on these models.
Epoxy terminal
seal is standard
on these models.
A23-A40 10/6/00, 6:40 AM27
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
A28
5000 SERIES - MINIATURE TOGGLE SWITCHES
MODEL NO. CIRCUIT
5656AKB ON - ON
5659AKB ON OFF ON
5657AKB MOM OFF MOM
5658AKB ON OFF MOM
5652AKB ON - MOM
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
Three pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5666AKB ON - ON
5669AKB ON OFF ON
5667AKB MOM OFF MOM
5668AKB ON OFF MOM
5662AKB ON - MOM
5664THAKB* ON ON ON
5664TH1RAKB* ON ON MOM
5664TH2RAKB* MOM ON MOM
Handle position: III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
11-12 10-11
* Function 4: SP in DP case. see diagram at end of section.
Four pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts
Single pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
Double pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
1 locked position
5636AB-1V ON - ON
2 locked positions
5636AB-2V ON - ON
3 locked positions
5639AB-3V ON OFF ON
Handle position
(see dwg.) :III II I
Terminals
connected: 2-3 1-2
MODEL NO. CIRCUIT
1 locked position
5646AB-1V ON - ON
2 locked positions
5646AB-2V ON - ON
3 locked positions
5649AB-3V ON OFF ON
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
13.2013.20
1.801.80
3.00 DIA3.00 DIA
(.519)(.519)
(.070)(.070)
(.118 DIA)(.118 DIA)
3.703.70
(.145)(.145)
0.800.80
(.031)(.031) 0.500.50
(.019)(.019)
13.1013.10
(.516)(.516)
1.001.00
(.039)(.039)
8.008.00
(.314)(.314)
(.413)(.413)
10.5010.50
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
(.834)(.834)
21.2021.20
(.187)(.187)
4.754.75
2424””
IIIIII
IIII
II
4.704.70
(.185)(.185)
1212
1111
1010
77
88
99
(.580)(.580)(.354)(.354) 14.7514.759.009.00
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
(.584)(.584)
14.8514.85
(.594)(.594)
15.1015.10
(.145)(.145)
3.703.70
(.472)(.472)
12.0012.00
(.019)(.019)
0.500.50
0.800.80
(.031)(.031) EpoxyEpoxy
1V1V
3V3V
2V2V
EpoxyEpoxy
(.031)(.031)
0.800.80
0.500.50
(.019)(.019)
12.0012.00
(.472)(.472)
3.703.70
(.145)(.145)
15.1015.10
(.594)(.594)
14.8514.85
(.584)(.584)
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
9.009.00 14.7514.75
(.354)(.354) (.580)(.580)
1V1V
3V3V
2V2V
(.187)(.187)
4.754.75
2424
(.519)(.519)
13.2013.20
(.118 DIA)(.118 DIA)
3.00 DIA3.00 DIA
(.070)(.070)
1.801.80
10.5010.50
(.413)(.413) (.314)(.314)
8.008.00
(.039)(.039)
1.001.00
(.019)(.019)
0.500.50
(.031)(.031)
0.800.80
(.145)(.145)
3.703.70
(.516)(.516)
13.1013.10
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
(.649)(.649)
16.5016.50
(.187)(.187)
4.754.75
IIIIII
IIII
II33
22
1177
88
99
(.185)(.185)
4.704.70
Keyway
Keyway
Keyway
Keyway
Epoxy
terminal
seal is
standard
on these
models.
Epoxy
terminal
seal is
standard
on these
models.
A23-A40 10/6/00, 6:40 AM28
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A29
5000 SERIES - MINIATURE TOGGLE SWITCHES
Three pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
1 locked position
5656AB-1V ON - ON
2 locked positions
5656AB-2V ON - ON
3 locked positions
5659AB-3V ON OFF ON
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
Four pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
1 locked position
5666AB-1V ON - ON
2 locked positions
5666AB-2V ON - ON
3 locked positions
5669AB-3V ON OFF ON
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
11-12 10-11
MODEL NO. CIRCUIT
5236CDB ON - ON
5239CDB ON OFF ON
5237CDB MOM OFF MOM
5238CDB ON OFF MOM
5232CDB ON - MOM
Handle position
(see dwg.) :III II I
Terminals
connected: 2-3 1-2
Single pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terminals - gold or silver contacts
Double pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terminals - gold or silver contacts
13.2013.20
(.519)(.519)
2424
12.0012.00
(.472)(.472)
3.00 DIA3.00 DIA
(.118 DIA)(.118 DIA)
4.754.75
(.187)(.187)
8.008.00
(.314)(.314)
(.413)(.413)
10.5010.50
1.001.00
(.039)(.039)
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
4.004.00
(.157)(.157)
0.500.50
(.019)(.019)
0.800.80
(.031)(.031)
13.3013.30
(.523)(.523)
1.101.10
(.043)(.043)
4.704.70
1.60 DIA1.60 DIA
(.063 DIA)(.063 DIA)
(.185)(.185)
(.187)(.187)
4.754.75
IIIIII
IIII
II
11
22
33
4.704.70
(.185)(.185)
66
55
44
4.754.75
(.187)(.187)
(.031)(.031)
0.800.80
0.500.50
(.019)(.019)
13.0013.00
(.511)(.511)
3.703.70
(.145)(.145)
15.1015.10
(.594)(.594)
14.8514.85
(.584)(.584)
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
9.009.00 14.7514.75
(.354)(.354) (.580)(.580)
1V1V
3V3V
EpoxyEpoxy
2V2V
(.580)(.580)(.354)(.354) 14.7514.759.009.00
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
(.584)(.584)
14.8514.85
(.594)(.594)
15.1015.10
(.145)(.145)
3.703.70
(.511)(.511)
13.0013.00
(.019)(.019)
0.500.50
0.800.80
(.031)(.031) (.187)(.187)
4.754.75
1V1V
3V3V
2V2V
EpoxyEpoxy
Keyway
Keyway
Keyway
Keyway
(.039)(.039)
1.001.00
10.5010.50
(.413)(.413) (.314)(.314)
8.008.00
(.031)(.031)
0.800.80
(.019)(.019)
0.500.50
2424
(.118 DIA)(.118 DIA)
3.00 DIA3.00 DIA
(.519)(.519)
13.2013.20
7.007.00
(.275)(.275)
(.185)(.185)
4.704.70
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS 6.35 DIA-40UNS
(.523)(.523) (.157)(.157)
13.3013.30 4.004.00
(.043)(.043)
1.101.10
(.185)(.185)
(.063 DIA)(.063 DIA)
1.60 DIA1.60 DIA
4.704.70
II
IIII
IIIIII
33
22
11
Epoxy
terminal
seal is
standard
on these
models.
Epoxy
terminal
seal is
standard
on these
models.
Note: above models have gold contacts.
Substitute 'A' for 'CD' for silver contacts.
* Function 4: SP in DP case. see diagram at end
of section. Note: above models have gold contacts.
Substitute 'A' for 'CD' for silver contacts.
MODEL NO. CIRCUIT
5246CDB ON - ON
5249CDB ON OFF ON
5247CDB MOM OFF MOM
5248CDB ON OFF MOM
5242CDB ON - MOM
5244THCDB* ON ON ON
5244TH1RCDB* ON ON MOM
5244TH2RCDB* MOM ON MOM
Handle position: III II I
Terminals 2-3 1-2
connected: 5-6 4-5
A23-A40 10/6/00, 6:40 AM29
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
A30
5000 SERIES - MINIATURE TOGGLE SWITCHES
MODEL NO. CIRCUIT
5256CDB ON - ON
5259CDB ON OFF ON
5257CDB MOM OFF MOM
5258CDB ON OFF MOM
5252CDB ON - MOM
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
Three pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terminals - gold or silver contacts
MODEL NO. CIRCUIT
5266CDB ON - ON
5269CDB ON OFF ON
5267CDB MOM OFF MOM
5268CDB ON OFF MOM
5262CDB ON - MOM
5264THCDB* ON ON ON
5264TH1RCDB* ON ON MOM
5264TH2RCDB* MOM ON MOM
Handle position III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
11-12 10-11
* Function 4: SP in DP case. see diagram at end of section.
Four pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terms. - gold or silver contacts
MODEL NO. CIRCUIT
5236MIWRCD ON - ON
5239MIWRCD ON OFF ON
5237MIWRCD MOM OFF MOM
5238MIWRCD ON OFF MOM
5232MIWRCD ON - MOM
Handle position
(see dwg.) :III II I
Terminals
connected: 2-3 1-2
Single pole - standard actuator - 1/4-40 threaded bushing - wire-wrap terminals - gold or silver contacts
MODEL NO. CIRCUIT
5246MIWRCD ON - ON
5249MIWRCD ON OFF ON
5247MIWRCD MOM OFF MOM
5248MIWRCD ON OFF MOM
5242MIWRCD ON - MOM
5244MIWRTHCD* ON ON ON
5244MIWRTH1RCD* ON ON MOM
5244MIWRTH2RCD* MOM ON MOM
Handle position: III II I
Terminals 2-3 1-2
connected: 5-6 4-5
* Function 4: SP in DP case. see diagram at end of section.
Double pole - standard actuator - 1/4-40 threaded bushing - wire-wrap terminals - gold or silver contacts
1.001.00
(.039)(.039)
0.600.60
(.023)(.023)
0.600.60
(.023)(.023)
5.085.08
13.1013.10
(.200)(.200)
(.515)(.515)
24 24
8.008.00
(.314)(.314)
(.413)(.413)
10.5010.50
5.085.08
5.085.08
(.200)(.200)
(.200)(.200)
(.472)(.472)
12.0012.00
(.519)(.519)
13.2013.20
(.043 DIA)(.043 DIA)
1.10 DIA1.10 DIA 6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.118 DIA)(.118 DIA)
3.00 DIA3.00 DIA
(.665)(.665)
16.9016.90
EPOXYEPOXY
332211
IIIIII
IIII
II
21.2021.20
13.2013.20
3.00 DIA3.00 DIA
(.834)(.834)
(.519)(.519)
4.754.75
(.187)(.187)
(.118 DIA)(.118 DIA)
8.008.00
(.314)(.314)
(.413)(.413)
10.5010.50
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
14.4014.40
(.567)(.567)
4.004.00
(.157)(.157)
(.019)(.019)
1.001.00
(.039)(.039)
0.800.80
(.031)(.031)
(.043)(.043)
1.101.10
4.704.70
(.185)(.185)
(.187)(.187)
4.754.75
1.60 DIA
1.60 DIA
(.063 DIA)(.063 DIA)
0.500.50
2424
IIIIII
IIII
II
4.704.70
(.185)(.185)
1212
1111
1010
88
77
99
1.10 DIA1.10 DIA
(.043 DIA)(.043 DIA) (.200)(.200)
5.085.08
10.5010.50
(.413)(.413) (.314)(.314)
8.008.00
2424
(.515)(.515)
13.1013.10
(.023)(.023)
0.600.60
(.039)(.039)
1.001.00
0.600.60
(.023)(.023)
(.665)(.665)
16.9016.90
(.275)(.275)
7.007.00
(.519)(.519)
(.200)(.200)
5.085.08
13.2013.20
EPOXYEPOXY
112233
IIIIII
IIII
II
3.00 DIA3.00 DIA
(.118 DIA)(.118 DIA)
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
(.519)(.519)
13.2013.20
(.118 DIA)(.118 DIA)
3.00 DIA3.00 DIA
(.187)(.187)
4.754.75
16.5016.50
(.649)(.649)
10.5010.50
(.413)(.413) (.314)(.314)
8.008.00
(.039)(.039)
1.001.00
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
(.031)(.031)
0.800.80
(.019)(.019)
0.500.50
(.157)(.157)
4.004.00
(.567)(.567)
14.4014.40
(.043)(.043)
1.101.10
(.185)(.185)
4.704.70
(.187)(.187)
4.754.75
(.063 DIA)(.063 DIA)
1.60 DIA1.60 DIA
2424
IIIIII
IIII
II33
22
1177
88
99
(.185)(.185)
4.704.70
Keyway
Keyway
Keyway
Keyway
Epoxy
terminal
seal is
standard
on these
models.
Epoxy
terminal
seal is
standard
on these
models.
Note: above models have gold contacts.
Substitute 'A' for 'CD' for silver contacts.
Note: Listed models have gold
contacts. Substitute 'A' for 'CD'
for silver contacts.
Note: above models have gold contacts.
Substitute 'A' for 'CD' for silver contacts.
Note: Listed models have gold
contacts. Substitute 'A' for 'CD'
for silver contacts.
A23-A40 10/6/00, 6:41 AM30
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A31
5000 SERIES - MINIATURE TOGGLE SWITCHES
MODEL NO. CIRCUIT
5236WCDB16X404 ON - ON
5239WCDB16X404 ON OFF ON
5237WCDB16X404 MOM OFF MOM
5238WCDB16X404 ON OFF MOM
5232WCDB16X404 ON - MOM
Handle position
(see dwg.) :III II I
Terminals
connected: 2-3 1-2
Single pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts
MODEL NO. CIRCUIT
5246WCDB16X404 ON - ON
5249WCDB16X404 ON OFF ON
5247WCDB16X404 MOM OFF MOM
5248WCDB16X404 ON OFF MOM
5242WCDB16X404 ON - MOM
5244WTHCDB16X404* ON ON ON
5244WTH1RCDB16X404* ON ON MOM
5244WTH2RCDB16X404* MOM ON MOM
Handle position: III II I
Terminals 2-3 1-2
connected:5-6 4-5
* Function 4: SP in DP case. see diagram
at end of section.
Double pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts
MODEL NO. CIRCUIT
5256WCDB16 ON - ON
5259WCDB16 ON OFF ON
5257WCDB16 MOM OFF MOM
5258WCDB16 ON OFF MOM
5252WCDB16 ON - MOM
Handle position
(see dwg.) :III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
Three pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts
MODEL NO. CIRCUIT
5236WWCDB16X445 ON - ON
5239WWCDB16X445 ON OFF ON
5237WWCDB16X445 MOM OFF MOM
5238WWCDB16X445 ON OFF MOM
5232WWCDB16X445 ON - MOM
Handle position
(see dwg.): III II I
Terminals
connected: 2-3 1-2
Single pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts
7.307.30
(.287)(.287)
2.67 DIA2.67 DIA
(.105)(.105)
33
II
11.0011.00 7.207.20
3.813.81 12.7012.70 7.407.40
12.0012.00
4.704.70
0.800.80
0.500.50
(.031)(.031)
(.019)(.019)
(.472)(.472)
(.283)(.283)(.433)(.433)
2424
(.291)(.291)
(.185)(.185)
(.150)(.150) (.500)(.500)
(.196)(.196)
(.500)(.500)(.150)(.150)
5.085.08
12.7012.703.813.81
4.704.70
(.185)(.185)
1.60 DIA1.60 DIA
(.062 DIA)(.062 DIA)
33
66
IIII IIIIII
2211
(.246 DIA)(.246 DIA)
6.25 DIA
6.25 DIA
EpoxyEpoxy
1122
IIIIIIIIII
(.185)(.185)
4.704.70
(.196)(.196)
(.500)(.500)
5.085.08
12.7012.70
(.062 DIA)(.062 DIA)
1.60 DIA1.60 DIA
(.500)(.500)
(.185)(.185)
(.291)(.291)
(.246 DIA)(.246 DIA)
2424
(.433)(.433) (.283)(.283)
(.275)(.275)
(.019)(.019) (.031)(.031)
6.25 DIA6.25 DIA
7.007.00
0.500.50 0.800.80
4.704.70
7.207.2011.0011.00
7.407.4012.7012.70
II
33
(.105)(.105)
2.67 DIA2.67 DIA
(.287)(.287)
7.307.30
EpoxyEpoxy
2.67 DIA2.67 DIA
6.25 DIA6.25 DIA
(.246 DIA)(.246 DIA)
(.105 DIA)(.105 DIA)
(.150)(.150)(.564)(.564)(.283)(.283)
7.207.20 14.3514.35 3.813.81
(.236)(.236) (.492)(.492)
(.653)(.653) (.145)(.145)
(.043)(.043)
(.519)(.519)
13.2013.20
3.703.70
6.006.00 12.512.5
16.6016.60
1.101.10
3.813.81 14.3514.35
5.08
5.08
(.150)(.150) (.564)(.564)
(.196)(.196)
(.185)(.185)
4.704.70
(.031)(.031)
0.800.80
(.062 DIA)(.062 DIA)
1.60 DIA1.60 DIA
(.185)(.185)
(.019)(.019)
0.500.50
4.704.70
IIIIII
IIII
II
(.039)(.039)
1.001.00
44
55
66
2424
77
99
5.085.08
(.200)(.200)
(.334)(.334)
8.508.50
EpoxyEpoxy
(.500)(.500) (.150)(.150)
(.433)(.433)
2424
(.246 DIA)(.246 DIA)
(.043)(.043)
(.275)(.275)
(.200)(.200)
(.039)(.039)
(.150)(.150)
(.500)(.500)
(.200)(.200)
(.062 DIA)(.062 DIA)
(.301)(.301)
II
IIII
IIIIII
3.813.81
12.7012.70
1.101.10
6.25 DIA6.25 DIA
11.0011.007.007.00
0.800.80
3.813.81
12.7012.70 5.085.08
1.001.00
1.60 DIA1.60 DIA
5.085.08
3.003.00
(.118)(.118) (.519)(.519)
13.2013.20
33
22
11
6.856.85
(.269)(.269)
(.283)(.283)
7.207.20
(.287)(.287)
7.307.30
(.105 DIA)(.105 DIA)
2.67 DIA2.67 DIA
EpoxyEpoxy
Note: above models have gold contacts.
Substitute 'A' for 'CD' for silver contacts.
Note: above models have gold contacts.
Substitute 'A' for 'CD' for silver contacts.
Note: above models have gold contacts.
Substitute 'A' for 'CD' for silver contacts.
Note: Listed models have gold
contacts. Substitute 'A' for 'CD'
for silver contacts.
A23-A40 10/6/00, 6:41 AM31
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
A32
5000 SERIES - MINIATURE TOGGLE SWITCHES
MODEL NO. CIRCUIT
5246WWCDB16X445 ON - ON
5249WWCDB16X445 ON OFF ON
5247WWCDB16X445 MOM OFF MOM
5248WWCDB16X445 ON OFF MOM
5242WWCDB16X445 ON - MOM
5244WWTHCDB16X445* ON ON ON
5244WWTH1RCDB16X445* ON ON MOM
5244WWTH2RCDB16X445* MOM ON MOM
Handle position: III II I
Terminals 2-3 1-2
connected: 5-6 4-5
* Function 4: SP in DP case. see diagram at end of section.
MODEL NO. CIRCUIT
5266WWCDB16X514 ON - ON
5269WWCDB16X514 ON OFF ON
5267WWCDB16X514 MOM OFF MOM
5268WWCDB16X514 ON OFF MOM
5262WWCDB16X514 ON - MOM
5264WWTHCDB16X514* ON ON ON
5264WWTH1RCDB16X514* ON ON MOM
5264WWTH2RCDB16X514* MOM ON MOM
Handle position: III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
11-12 10-11
* Function 4: SP in DP case. see diagram at end of section.
Four pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts
MODEL NO. CIRCUIT
5256WWCDB16X514 ON - ON
5259WWCDB16X514 ON OFF ON
5257WWCDB16X514 MOM OFF MOM
5258WWCDB16X514 ON OFF MOM
5252WWCDB16X514 ON - MOM
Handle position: III II I
Terminals 2-3 1-2
connected: 5-6 4-5
8-9 7-8
MODEL NO. CIRCUIT
5236YCDB16X445 ON - ON
5239YCDB16X445 ON OFF ON
5237YCDB16X445 MOM OFF MOM
5238YCDB16X445 ON OFF MOM
5232YCDB16X445 ON - MOM
Handle position
(see dwg.): III II I
Terminals
connected: 2-3 1-2
3.813.81
(.150)(.150)
3.813.81
(.150)(.150)
(.043)(.043)
1.101.10
(.834)(.834)
(.187)(.187)
2424
II
IIII
IIIIII
(.031)(.031)
5.085.08
(.200)(.200)
0.800.80 4.754.75
21.2021.20
(.519)(.519)(.118)(.118)
(.039)(.039)
13.2013.203.003.00
1.001.00
99
88
77
1212
1111
1010
1.60 DIA1.60 DIA
(.062 DIA)(.062 DIA)
4.754.75
(.187)(.187)
5.085.08
(.200)(.200)
6.25 DIA6.25 DIA
2.67 DIA2.67 DIA
(.246 DIA)(.246 DIA)
(.105 DIA)(.105 DIA)
7.257.25
(.271)(.271)
6.906.90
7.207.20
(.283)(.283)
(.285)(.285)
12.4512.45
(.490)(.490)
(.564)(.564)
14.3514.35
(.564)(.564)
14.3514.35
EpoxyEpoxy
(.125)(.125)
(.620)(.620) (.275)(.275)
(.511)(.511)(.161)(.161)
4.104.10 13.0013.00
3.183.18
15.7515.75 7.007.00
15.7515.75
(.620)(.620)
3.183.18
(.125)(.125)
(.185)(.185)
4.704.70
EPOXYEPOXY
(.062 DIA)(.062 DIA)
1.60 DIA1.60 DIA
1122330.400.40
(.015)(.015)
(.050)(.050)
1.271.27
IIIIII IIII II
2424
(.246 DIA)(.246 DIA)
6.25 DIA6.25 DIA
(.105 DIA)(.105 DIA)
2.67 DIA2.67 DIA
(.283)(.283)
7.207.20
(.287)(.287)
7.307.30
13.2013.20
(.519)(.519)
12.7012.70 3.813.81
(.150)(.150)
(.500)(.500)
11.0011.00
(.433)(.433)
2424 0.800.80
(.301)(.301)
(.472)(.472)
5.085.08
(.200)(.200)
1.60 DIA1.60 DIA
12.7012.70 3.813.81
(.062 DIA)(.062 DIA)
(.500)(.500) (.150)(.150)
(.043)(.043)
1.101.10
(.187)(.187)
12.0012.00
II
IIII
IIIIII
4.754.75
(.118)(.118)
3.003.00
66
55
44
33
22
11
5.085.08
(.039)(.039)
(.200)(.200)
1.001.00
(.187)(.187)
4.754.75
2.67 DIA2.67 DIA
(.105 DIA)(.105 DIA)
6.25 DIA6.25 DIA
(.246 DIA)(.246 DIA)
(.269)(.269)
6.856.85
7.307.30
(.287)(.287) 7.207.20
(.283)(.283)
EpoxyEpoxy
(.105 DIA)(.105 DIA)
(.246 DIA)(.246 DIA)
2.67 DIA2.67 DIA
6.25 DIA6.25 DIA
(.150)(.150)
3.813.81
4.754.75
(.187)(.187)
1.101.10
(.043)(.043)
(.649)(.649)
(.150)(.150)
3.813.81
IIIIII
IIII
II
16.5016.50
(.031)(.031)
0.800.80
3.003.00 13.2013.20
(.118)(.118) (.519)(.519)
1.001.00
(.039)(.039)
(.200)(.200)
5.085.08
99
88
77
33
22
11
(.200)(.200)
5.085.08
(.062 DIA)(.062 DIA)
1.60 DIA1.60 DIA
4.754.75
(.187)(.187)
(.490)(.490)
12.4512.45
(.285)(.285)
2424
(.283)(.283)
7.207.20
6.906.90
(.271)(.271)
7.257.25
(.564)(.564)
14.3514.35
(.564)(.564)
14.3514.35
EpoxyEpoxy
Double pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts
Three pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts
Single pole - short actuator - 1/4" smooth bush. - straight p.c. terms. - bracket mtg. - gold or silver contacts
Note: above models have gold contacts.
Substitute 'A' for 'CD' for silver contacts.
Note: above models have gold contacts.
Substitute 'A' for 'CD' for silver contacts.
Note: Listed models have gold
contacts. Substitute 'A' for 'CD'
for silver contacts.
Note: Listed models have gold
contacts. Substitute 'A' for 'CD'
for silver contacts.
A23-A40 10/6/00, 6:41 AM32
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A33
5000 SERIES - MINIATURE TOGGLE SWITCHES
MODEL NO. CIRCUIT
5246YCDB16X445 ON - ON
5249YCDB16X445 ON OFF ON
5247YCDB16X445 MOM OFF MOM
5248YCDB16X445 ON OFF MOM
5242YCDB16X445 ON - MOM
5244YTHCDB16X445* ON ON ON
5244YTH1RCDB16X445* ON ON MOM
5244YTH2RCDB16X445* MOM ON MOM
Handle position: III II I
Terminals 2-3 1-2
connected: 5-6 4-5
* Function 4: SP in DP case. see diagram at
end of section.
Double pole - paddle actuator - 1/4" threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5636AB4N+U242N ON - ON
5639AB4N+U242N ON OFF ON
5637AB4N+U242N MOM OFF MOM
5638AB4N+U242N ON OFF MOM
5632AB4N+U242N ON - MOM
Handle position: III II I
Terminals connected: 2-3 1-2
Above models have black paddle.
Single pole - paddle actuator - 1/4" threaded bushing - solder lug terminals - silver contacts
MODEL NO. CIRCUIT
5646AB4N+U242N ON - ON
5649AB4N+U242N ON OFF ON
5647AB4N+U242N MOM OFF MOM
5648AB4N+U242N ON OFF MOM
5642AB4N+U242N ON - MOM
5644THAB4N+U242N* ON ON ON
5644TH1RAB4N+U242N* ON ON MOM
5644TH2RAB4N+U242N* MOM ON MOM
Handle position: III II I
Terminals connected: 2-3 1-2
5-6 4-5
*Function 4: SP in DP case. see diagram at end of section
Above models have black paddle.
(.039)(.039)
1.001.00
(.314)(.314)
8.008.00
(.031)(.031)
0.800.80
(.019)(.019)
0.500.50
(.070)(.070)
1.801.80
(.519)(.519)
13.2013.20
7.007.00
(.275)(.275)
(.185)(.185)
4.704.70
(.472)(.472)
12.0012.00 (.145)(.145)
3.703.70
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
II
IIII
IIIIII
33
22
11
(.496)(.496)
12.6012.60
(.259)(.259)
(.208)(.208)
(.088)(.088)
2.252.25 6.606.60
5.305.30
(.557)(.557)
14.1514.15
2424
EpoxyEpoxy
13.2013.20
(.519)(.519)
1.801.80
4.754.75
(.070)(.070)
(.187)(.187)
4.704.70
(.185)(.185)
0.800.80
(.031)(.031)
3.703.70
(.145)(.145)
0.500.50
(.019)(.019)
12.0012.00
(.472)(.472)
(.472)(.472)
12.0012.00
11
22
3366
55
44
14.1514.15
(.557)(.557)
6.606.60
(.259)(.259)
6.35 DIA-40UNS
6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
8.008.00
(.314)(.314)
2424
5.305.30
2.252.25
(.088)(.088)
(.208)(.208)
12.6012.60
(.496)(.496)
IIIIII
IIII
II
1.001.00
(.039)(.039)
EpoxyEpoxy
(.620)(.620)
15.7515.75
(.125)(.125)
3.183.18
15.7515.75
3.183.18
(.620)(.620)
(.125)(.125) 4.754.75
8.208.20
4.704.70
(.185)(.185)
(.187)(.187)
(.322)(.322) IIIIII
(.472)(.472)
(.511)(.511)(.185)(.185)
12.0012.00
4.704.70 13.0013.00
EPOXYEPOXY
(.062 DIA)(.062 DIA)
1.60 DIA1.60 DIA
33
22
11
(.015)(.015)
(.050)(.050)
0.400.40
1.271.27
IIII II
7.207.20
(.283)(.283)
2424
(.271)(.271)
6.906.90
2.67 DIA2.67 DIA
(.105 DIA)(.105 DIA)
6.25 DIA6.25 DIA
(.246 DIA)(.246 DIA)
Keyway
Keyway
Double pole - short actuator - 1/4" smooth bush. - straight p.c. terms. - bracket mtg. - gold or silver contacts
Note: Listed models have gold
contacts. Substitute 'A' for 'CD'
for silver contacts.
A23-A40 10/6/00, 6:41 AM33
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
A34
5000 SERIES - MINIATURE TOGGLE SWITCHES
5000 Series switches for peak currents
● 2-120 amps at 60 VDC - 10,000 cycles minimum.
● 3-40 amps at 125/250 VAC - 10,000 cycles minimum.
● Silver nickel alloy (AgNi) contacts.
Other specifications same as 5000 Series.
Also see 'Switches for Peak Currents' technical page in rear of catalog.
Double pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals
MODEL NO. CIRCUIT
5636ABX814 ON - ON
MODEL NO. CIRCUIT
5646ABX814 ON - ON
Single pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals
13.2013.20
(.519)(.519)
2424
3.00 DIA3.00 DIA
(.118 DIA)(.118 DIA)
1.801.80
4.754.75
(.070)(.070)
(.187)(.187)
4.704.70
(.185)(.185)
0.800.80
(.031)(.031)
8.008.00
(.314)(.314)
(.413)(.413)
10.5010.50
3.703.70
(.145)(.145)
0.500.50
(.019)(.019)
12.0012.00
(.472)(.472)
1.001.00
(.039)(.039)
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.472)(.472)
12.0012.00
IIIIII
IIII
II
11
22
3366
55
44
EPOXYEPOXY
Keyway
Keyway
(.039)(.039)
1.001.00
10.5010.50
(.413)(.413) (.314)(.314)
8.008.00
(.031)(.031)
0.800.80
(.019)(.019)
0.500.50
2424
(.118 DIA)(.118 DIA)
3.00 DIA3.00 DIA
(.070)(.070)
1.801.80
(.519)(.519)
13.2013.20
7.007.00
(.275)(.275)
(.185)(.185)
4.704.70
(.472)(.472)
12.0012.00 (.145)(.145)
3.703.70
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
II
IIII
IIIIII
33
22
11
EPOXYEPOXY
A23-A40 10/6/00, 6:41 AM34
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
Model Structure:
'BUILD YOUR OWN SWITCH' ORDER FORMAT
Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.
Allowable options are shown below each respective box.
Note 'NONE' indicates box may be left empty.
Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and spec-
ifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by
simply selecting from all available options shown and filling in the boxes.
5
3Single pole
4Double pole
5Three pole
6Four pole
(NONE)
MSolder lugs with
15/32-32 (11.9mm)
bushing
MI WR
Wire-wrap (epoxy
term. seal standard)
WHorizontal right
angle p.c.
WWVertical right
angle p.c.
YStraight p.c.
w/mounting brk't.
ZQuick connect (epoxy
term. seal standard)
5000 SERIES - MINIATURE TOGGLE SWITCHES
Series Terminals Number Electrical Terminals (For function 4 models only) Contact
& bushings of poles functions connections /functions materials
(NONE)
TH ON ON ON
TH1RON ON MOM
TH2RMOM ON MOM
2Straight p.c.,right
angle, quick con-
nect or wire-wrap
terminals with 1/4-
40 (6.35mm)
threaded bushing.
6Solder lug term-
inals with 1/4-40
(6.35mm) or 15/32-
32 (11.9mm)
threaded bushings.
6ON - ON
9ON OFF ON
7MOM OFF MOM
8ON OFF MOM
2ON - MOM
4* ON ON ON
4* ON 0N MOM
4* MOM ON MOM
* specify selection
from 'connections/
functions' box also -
(For double & four
pole only).
ASilver
ADSilver,
gold
plated
CDBrass,
gold
plated
Options:
Black finish Sealing Actuators Agency Recognition Special options Caps and paddles
(NONE)
GMatte black
finish on bush-
ing, actuator &
hardware.
(NONE) Unless standard -
(see Terminals above)
BEpoxy sealed
terminals
KFront panel
sealing with
o-ring & gasket.
KBBoth of above
(NONE)
UL
CSA
VDE
LNZTele-
communications
listing
GAMMilitary
listing
(consult factory for
details of approved
models).
(NONE)
Caps
U270
U1710
U640
Paddles
U240N
U290N
U390N
(see drawings and
color codes).
Examples of completely specified
model numbers:
5636AB, 5244WWTH2RAB16UL
(NONE)
13Standard
2
7
8Flat
9Flat
12Flat
16
17
21Insulated
22
23
24Large (long)
25
27Large (short)
4NFor pad-
dles only
1VLocking
(1 position)
2VLocking
(2 positions)
3VLocking
(3 positions)
(see actuator drawings).
A35
(NONE)
See
listing
on pg.
C39
Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question.
A23-A40 10/6/00, 6:41 AM35
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
A36
5000 SERIES - MINIATURE TOGGLE SWITCHES
SEALING
OPTION DRAWINGS
(NONE) Indicates no terminal sealing.
BIndicates epoxy terminal sealing.
Note: for models with 'Z' and 'MIWR'
epoxy terminal sealing is standard
and need not be specified with 'B'.
KIndicates front panel sealing with
o-ring (1) and gasket (2) to protect the
switch from water and dust. Withstands
1 bar pressure. Available on models with
1/4" (6.35mm) or 15/32" (11.9mm)
threaded bushings. Not available with
actuators 8,9, 12, 22 or 23.
K B Includes both B and K above.
Kwith 1/4" (6.35mm)
keyway bushing
Kwith 15/32" (11.9mm)
flatted bushing
Includes gasket washer U360 Includes gasket washer U60
ACTUATORS for 1/4" (6.35mm) threaded bushings
13 Standard 24N For use with paddles only
8 Not available with option K9Not available with option K12 Not available with option K
16 17
21 Specify U640
insulative exten-
sion with this act-
uator and replace '0'
with color selection
below.
1 blue 2 black
3 green 4 grey
5 yellow 6 red
7/1 white 9 orange
22 Not available with option K23 Not available with option K
3.00 DIA3.00 DIA
1.001.00
9.009.00 10.5010.50
(.039)(.039)
(.354)(.354) (.413)(.413)
(.118 DIA)(.118 DIA)
(.118)(.118)
(.629)(.629)
3.00 DIA3.00 DIA
16.0016.00
(.354)(.354)
9.009.00
(.196 DIA)(.196 DIA)
(.838)(.838)
21.3021.30
5.00 DIA5.00 DIA
(.196 DIA)(.196 DIA)
(.448)(.448)
5.00 DIA5.00 DIA
11.4011.40
(.165 DIA)(.165 DIA)
(.248)(.248)
4.20 DIA 4.20 DIA
6.306.30
(.354 DIA)(.354 DIA)
(.216)(.216)
2.70 DIA2.70 DIA
5.505.50
(.110 DIA)(.110 DIA)
(.275)(.275)
2.80 DIA2.80 DIA
7.007.00
(.129) DIA)(.129) DIA)
(.838)(.838)
3.30 DIA3.30 DIA
21.3021.30
(.645)(.645)
16.4016.40
(.129 DIA)(.129 DIA)
(.838)(.838)
3.30 DIA3.30 DIA
21.3021.30
(.129 DIA)(.129 DIA)
(.551)(.551)
3.30 DIA3.30 DIA
14.0014.00
(.157 MAX)(.157 MAX)
22
11
4 Maxi4 Maxi
11
(.118 MAX)(.118 MAX)
3 Maxi3 Maxi
22
25 Not available with option K
(.129 DIA)(.129 DIA)
(.642)(.642)
3.30 DIA3.30 DIA
16.3016.30
A23-A40 10/6/00, 6:42 AM36
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A37
5000 SERIES - MINIATURE TOGGLE SWITCHES
OPTION DRAWINGS (cont'd.)
ACTUATORS for 15/32" (11.9mm) threaded bushings
24 27
1V 1 locked position (function 6) 2V 2 locked positions (function 6) 3V 3 locked positions (functions 9 & 4)
LOCKING ACTUATORS for 1/4" (6.35mm) threaded bushings Other locking actuator styles available - consult factory.
ACTUATORS for smooth bushing models (W, WW & Y)
13 Standard 24N For use with paddles only
716 17
21 Specify U640 insulative extension with this actuator
and replace '0' with color selection.
Colors
1blue
2black
3green
4grey
5yellow
6red
7/1 white
9orange
Note that for switches
with mounting brackets,
the actuator length may
be reduced by .015" (0.4mm).
Refer to individual switch
drawings. '
(.196 DIA)(.196 DIA)
(.460)(.460)(.468)(.468)
11.7011.7011.9011.90
5.00 DIA5.00 DIA
(.584)(.584)(.354)(.354)
(1/4-40UNS)(1/4-40UNS)
14.8514.859.009.00
6.35 DIA-40UNS6.35 DIA-40UNS
(.580)(.580)(.354)(.354)
(1/4-40UNS)(1/4-40UNS)
14.7514.759.009.00
6.35 DIA-40UNS6.35 DIA-40UNS
(.204 DIA)(.204 DIA)
(.594)(.594)(.354)(.354)
(1/4-40UNS)(1/4-40UNS)
9.009.00 15.1015.10
5.20 DIA5.20 DIA
6.35 DIA-40UNS6.35 DIA-40UNS
(.118 DIA)(.118 DIA)
(.531)(.531)(.236)(.236)
(.039)(.039)
13.5013.506.006.00
1.001.00
3.00 DIA3.00 DIA
3.00 DIA3.00 DIA
(.118 DIA)(.118 DIA)
(.748)(.748)
19.0019.00
(.472)(.472)
12.0012.00
(.263)(.263)
(.102 DIA)(.102 DIA)
2.60 DIA2.60 DIA
6.706.70
(.106 DIA)(.106 DIA)
(.334)(.334)
2.70 DIA2.70 DIA
8.508.50
(.110 DIA)(.110 DIA)
(.393)(.393)
2.80 DIA2.80 DIA
10.0010.00
(.129 DIA)(.129 DIA)
(.956)(.956)
(.645)(.645)
3.30 DIA3.30 DIA
24.3024.30
16.4016.40
(.688)(.688)(.468)(.468)
17.5017.5011.9011.90
5.00 DIA5.00 DIA
(.196 DIA)(.196 DIA)
A23-A40 10/6/00, 6:42 AM37
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
A38
5000 SERIES - MINIATURE TOGGLE SWITCHES
OPTION DRAWINGS (cont'd.)
ACTUATORS for switches with X404 and X445 options (see 'special options' pages following)
13 Standard 24N For use with paddles only
8Not available w/function 2 (ON - MOM) 9Not available w/function 2 (ON - MOM) 12 Not available w/function 2 (ON - MOM)
16 17 21 Specify U640 insulative extension
with this actuator and replace '0'
with color selection below.
Colors
1blue
2black
3green
4grey
5yellow
6red
7/1 white
9orange
23
22 Not available with sealing option K
or X408
INSULATING CAPS (replace '0' in part numbers below with color code)
U270 For actuator 13 and threaded
bushing only
U1040 For actuator 13 and smooth
bushing only
U1710 For actuator 17 and threaded
bushing or actuator 7 and
smooth bushing only
(.700)(.700)
17.8017.80
(.425)(.425)
10.8010.80
(.909)(.909)
23.1023.10
(.519)(.519)
13.2013.20
(.318)(.318)
8.108.10
(.287)(.287)
7.307.30
(.346)(.346)
8.808.80
16.4016.40
(.645)(.645)
(.909)(.909)
23.1023.10
(.909)(.909)
23.1023.10
(.622)(.622)
15.8015.80
(.433)(.433)
11.0011.00
(.137 DIA)(.137 DIA)
3.5 DIA3.5 DIA
(.531)(.531)
13.5013.50
(.137 DIA)(.137 DIA)
3.5 DIA3.5 DIA
(.287)(.287)
7.307.30
(.137 DIA)(.137 DIA)
3.5 DIA3.5 DIA
1.001.00
(.039)(.039)
(.484)(.484)
(.283)(.283)
12.3012.307.207.20
A23-A40 10/6/00, 6:42 AM38
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
5000 SERIES - MINIATURE TOGGLE SWITCHES
OPTION DRAWINGS (cont'd.)
PADDLES for actuator 4N only. Mat'l: UL94HB Polyamide (replace '0' in part numbers below with color code from preceeding pg.)
U240N U290N U390N
SPECIAL OPTIONS
FTin plated terminals (for p.c. terminals only).
X371 Smooth bushing .246" (6.25mm) instead of standard threaded bushing.
X372 Threaded bushing 1/4" (6.35mm). Height .274" (7mm).
X386 Threaded bushing 1/4" (6.35mm) to replace plain bushing on models
with W, WW & Y.
X404 Switches with W option with short actuator and offset terminal bends
(see Page A25).
X435 .732" (18.6mm) long p.c. terminals - epoxy terminal seal standard.
X438 Smooth bushing .246" (6.25mm). Height.283" (7.2mm) without shoulder.
X442 Threaded bushing 1/4" (6.35mm). Height .389" ( 9.9mm).
X445 Smooth bushing .283" (7.2mm) for W, WW & Y models. Available with
same actuators, insulating cap and paddles as X404.
X500 Threaded bushing 1/4" (6.35mm). Height .354" (9mm) without shoulder.
X507 .293" (10mm) long p.c. terminals.
X512 1.062" (27mm) long p.c. terminals - epoxy terminal seal standard.
X514 Spacing .564" (14.35mm) instead of .500" (12.7mm) for 3 and 4
pole WW models.
X515 Smooth bushing .246" (6.25mm) without shoulder.
X601 Silver plated brass contacts. Ratings - 0.2 amps 250 VAC, 0.4 amps
125 VAC or 0.5 amps 30 VDC. Electrical life : 20,000 cycles min.
Minimum quantity: 5000 pcs.
X681 Satin chrome actuator for flat actuators.
X729 1/299" (33mm) long p.c. terminals.
X764 Special customer specified marking.
X769 Red anodized locking lever top.
X806 Smooth bushing .246"
(6.25mm) instead of
standard threaded
bushing and silver plated
brass contacts.
X814 Switches for peak current.
See pg. A28.
X916 Locking lever on model
with smooth bushing.
X371 X372
X386
X442
X438
X500
X445
X514
X515 X916
A39
Printed circuit terminal lengths
Option Length L
X435 .732 (18.6mm)
X507 .293 (10mm)
X512 1.062 (27mm)
X729 1.299 (33mm)
(.496)(.496)
12.6012.60
(.259)(.259)
(.208)(.208)
(.088)(.088)
2.252.25 6.606.60
5.305.30
(.557)(.557)(.354)(.354)
(1/4-40UNS)(1/4-40UNS)
14.1514.159.009.00
6.35 DIA-40UNS6.35 DIA-40UNS
(.787)(.787)
20.0020.00
(.433)(.433)
(.236)(.236)
(.078)(.078)
2.002.00 11.0011.00
6.006.00
(.848)(.848)(.354)(.354) 21.5521.559.009.00
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.842)(.842)
21.4021.40
(.433)(.433)
(.551)(.551)
(.708)(.708)
(.236)(.236)
(.078)(.078)
2.00
2.00
6.006.00
11.00
11.00
14.0014.00
18.0018.00
9.009.00 21.5521.55
(.354)(.354) (.848)(.848)
6.35 DIA-40UNS6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.275)(.275)
(.039)(.039)
7.007.00
1.001.00
6.35 DIA-40UNS
6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.354)(.354)
(.039)(.039)
9.009.00
1.001.00
6.35 DIA-40UNS
6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.283)(.283)
(.246 DIA)(.246 DIA)
6.25 DIA6.25 DIA
7.207.20
(.389)(.389)
(.011)(.011)
0.300.30
9.909.90
6.35 DIA-40UNS
6.35 DIA-40UNS
(1/4-40UNS)(1/4-40UNS)
(.283)(.283)
(.039)(.039)
7.207.20
1.001.00
6.25 DIA
6.25 DIA
(.246 DIA)(.246 DIA)
(.354)(.354)
(1/4-40UNS)(1/4-40UNS)
6.35 DIA-40UNS6.35 DIA-40UNS
9.009.00
(.564)(.564)
14.3514.35
(.236)(.236)
6.006.00
6.25 DIA6.25 DIA
(.246 DIA)(.246 DIA)
(.580)(.580)(.354)(.354)
14.7514.759.009.00
(.039)(.039)
(.246 DIA)(.246 DIA)
6.256.25
1.001.00
LL
(.236)(.236)
(.039)(.039)
6.006.00
1.001.00
6.25 DIA6.25 DIA
(.246 DIA)(.246 DIA)
A23-A40 10/6/00, 6:42 AM39
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
A40
5000 SERIES - MINIATURE TOGGLE SWITCHES
PANEL CUT-OUTS & MISCELLANEOUS
PANEL CUT-OUTS for 1/4" (6.35mm) bushings
Standard (with locking ring supplied) With K sealing option
Standard (with locking ring supplied) With K sealing option
PANEL CUT-OUTS for 15/32" (11.9mm) bushings
WIRING for function 4 switch
Equivalent to single pole 3 throw switch. Dotted lines between
terminals 2 & 6 and 8 & 12 indicate external jumpers to be added by customer.
(.255 DIA)(.255 DIA)
6.50 DIA6.50 DIA
1.101.10
2.702.70
(.106)(.106)
(.043)(.043)
(.377)(.377) (.200)(.200)
(.066)(.066)
(.492 DIA)(.492 DIA) (.137 DIA)(.137 DIA)
12.50 DIA12.50 DIA
9.609.60
3.50 DIA3.50 DIA
5.105.10
1.701.70
12.50 DIA12.50 DIA
(.492 DIA)(.492 DIA)
5.205.20
2.20 DIA2.20 DIA6.50 DIA6.50 DIA
(.086 DIA)(.086 DIA)
(.255 DIA)(.255 DIA)
(.204)(.204)
1212
1111
1010
99
88
77
66
55
44
33
22
11
1212
1111
1010
99
88
77
66
55
44
33
22
11
11
22
33
44
55
66
77
88
99
1010
1111
1212
III III II II I I
S.9 IIIS.9 III
S.7 IIS.7 II
S.10IS.10I
EE1111
55
S.3 IIIS.3 III
S.1 IIS.1 II
S.4 IS.4 I
EE
44
55
66
44
55
66
44
55
66
THTH
Above diagrams are viewed from bottom of switch.
A23-A40 10/6/00, 6:43 AM40
