Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Type 761M
Axial Lead
Pressed/Oval Profile
Metallized Polypropylene
Film Capacitors
Specifications
Capacitance Range:
0.012 to 65.0 µF
Capacitance Tolerance:
±5% and ±10%, standard
(tolerances as close as ±3% available)
Voltage Rating:
160 to 630 VDC
100 to 250 VAC
Operating Temperature
Units may be operated at full rated
voltage from -55°C to +85°C.
Voltage De-rating above +85°C:
Units may be operated up to a
maximum of +105°C provided the
voltage is de-rated linearly to 50%
of the +85°C rating.
*Dissipation Factor:
Varies with capacitance and
frequency, please contact us for
specific details.
Insulation Resistance (measured at 100 VDC):
At +25°C: 400,000 MΩ for C ≤ 0.5 µF
200,000 MΩ-µF for C > 0.5 µF
At +85°C: 20,000 MΩ for C ≤ 0.5 µF
10,000 MΩ-µF for C > 0.5 µF
These are minimum ratings, call us if you
have a more demanding requirement.
Encapsulation:
Wrapped with flame retardant polyester
tape (meets UL510 specifications) and
potted with flame retardant epoxy (meets
UL94V-0 specifications).
Lead Wire:
Tinned Copper-Clad Steel for wire sizes:
0.020 (0.5) diameter (#24 AWG)
Tinned Copper for wire sizes:
0.025 (0.6) diameter (#22 AWG)
0.032 (0.8) diameter (#20 AWG)
0.040 (1.0) diameter (#18 AWG)
Dielectric/Construction:
Metallized Polypropylene film, single
section design. Non-Inductively wound.
In addition to the information provided here, SBE also offers complete design and manufacturing
of specific capacitance values, custom form factors, special lead terminations, etc.
#SBE761M10/01
Dimensions are in inches, millimeters are in parenthesis.
1
* Although polypropylene film capacitors have a very low dissipation factor, as noted above it is dependent upon
capacitance and operating frequency. Please refer to the application notes on pages 14 and 15 for additional
details on thermal management issues. In addition we encourage you to contact us to further discuss your
specific application.
Type 761M
Metallized Polypropylene Film Capacitors
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Who Are We
SB Electronics, Inc. Designs and Manufactures the most reliable film capacitor products for use in
today’s demanding applications. SBE, a former Sprague Electric company, was founded in 1986
following a management buyout. We manufacture the ubiquitous Orange Drop® and 192P Pacer® film
capacitor lines, both of which have reliably served the industry since 1959!
SBE’s expanding product offerings also include a wide range of Metallized and Film/Foil capacitors in
b
oth Radial and Axial leaded styles. We also bolstered our axial leaded product portfolio by purchasing
several lines from Industrial/Midwec in 1999. You can find additional details regarding our purchase o
f
Industrial/Midwec on our web site at: www.SBElectronics.com
Why choose SBE?
Our focus is on film capacitor products. SBE has the experience, technical expertise and supporting staf
f
to design and deliver the film capacitor you need, when you need it.
High voltage, tight tolerance, demanding peak currents, high frequency; whatever your application, SBE
can help you specify the right part. Our products are designed for life and reliably manufactured to
p
rovide the best electrical performance for your application.
Located in the pristine Green Mountains of Vermont, SBE benefits from a traditional “Vermont wor
k
ethic”, which is comprised of hard work, pride in craftsmanship, dedication and attention to detail. Put
our team to the test!
Our Company Philosophy
SBE’s Mission, Vision and Core Operating Values center around our critical success factors; which
include comprehensive technical support, proven reliability, short manufacturing lead times, an
d
dependable customer service that is second-to-none. SBE takes great pride in providing customer service
that answers your questions completely and timely by friendly people that are pleasant to work with!
SBE, providing you with the ultimate in Performance, from Design to Delivery.
Introduction to SBE
Orange Drop and Pacer are registered trademarks of SB Electronics, Inc.
2
Type 761M
Metallized Polypropylene Film Capacitors
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
General Specifications
The 761M series is designed and manufactured for use in many demanding power applications. They are non-
inductively wound using the most reliable metallized polypropylene film available. A wide range of capacitance values,
voltage ratings, lead terminations and sizes offer the designer an array of options to best meet the form, fit and functio
n
requirements specified.
With complete design and manufacturing operations located at our Barre, Vermont facility, SBE’s staff can provide the
expertise needed to support your application, be it with a standard product found here, or a tailor designed part specific
for your requirement. Regardless, SBE designs and manufactures film capacitors to outlast the products they are
installed in. If you are in need of any further technical specifications or require any application assistance we will be
pleased to assist you.
Operating Temperature Range:
Standard operating temperature range is –55°C
to +85°C. Units may be operated at the full rated
voltage within this temperature range.
The 761M series may be operated up to a
maximum temperature of +105°C, however
the voltage must be linearly de-rated to 50%
of the full rated voltage at +105°C.
Dielectric Withstanding Voltage:
Units shall withstand a DC potential of 200%
of rated voltage applied between terminals for
not more than 2 minutes.
Lead Bend Test:
After 3 consecutive 180° bends. No damage.
Lead Pull Test:
5 pounds (2.3 Kg) for one minute on lead axis.
N
o damage.
Humidity Testing:
Units subjected to 95% relative humidity for 250
hours with no voltage applied at +40°C. After
4 hours of drying, minimum product of insulation
resistance and capacitance shall be 40,000 MΩ-µF,
but need not exceed 80,000 MΩ at +25°C.
DC Voltage Life Test:
1000 hours at +85°C at 150% of rated voltage. After
test; capacitance shall not have changed by more
than ±2% of initial value, insulation resistance shall
not have decreased by more than 50% of initial value
and dissipation factor shall not have increased to
more than 0.12%. In addition, there shall be no open
or short circuits, and no sign of visible damage.
AC Voltage Life Test:
Minimum of 1000 hours at +85°C at 60 Hz. AC
test voltage applied at 110% of rated AC voltage.
After test; capacitance shall not have changed by
more than ±5% of initial value, insulation
resistance shall not have decreased by more than
50% of initial value and dissipation factor shall
not have changed by more than 0.03%. In
addition, there shall be no open or short circuits,
and no sign of visible damage. All measurements
made at 1 KHz.
Dielectric Material/Construction:
The 761M series is manufactured using metallized
polypropylene film as the dielectric. The
capacitor element is non-inductively wound in a
single section design.
Metallized polypropylene film utilizes a base film
of polypropylene with a thin layer of aluminum
vacuum deposited directly on the film as the
electrode.
Metallized film exhibits a characteristic called
“self-healing” or “self-clearing”, which is the
ability to remove a fault or short circuit in the
dielectric film by vaporizing (from high current
density) the metallization near the defect. The
metallization is so thin that negligible film damage
occurs during the clearing process. The vaporized
metal oxidizes over time, aiding in the isolation of
a fault area.
Additional Testing Notes:
Since it is not possible to list every detail of
testing we perform we strongly encourage you to
contact us with any specific question or
requirement you may have. Thank you.
3
Type 761M
Metallized Polypropylene Film Capacitors
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
761M 106 5 2 C – XXX
A suffix may be added to denote special construction, packaging,
marking, etc. To specify unit with tinned copper lug terminations
add –LUG in this position. Example: 761M10652-LUG.
Compact design indicator. A letter “C” is added to indicate
a compact size form factor. Refer to table of part numbers for specific
sizes.
DC Voltage Rating. 1 = 160 VDC 4 = 400 VDC
2 = 250 VDC 6 = 630 VDC
Capacitance Tolerance. 9 = ±10%; 5 = ±5%; 3 = ±3%
Capacitance. Expressed in Picofarads. The first two digits are
the significant figures, the third is the number of zeros following
(i.e. 106 = 10,000,000 pF = 10.0 µF).
SBE Type Number. Identifies basic capacitor design.
Ordering/Part Number Information
Standard Marking Format
Sample Marking
on unit
SBE 761M(C)
106J 250V
0145
Description
SBE - SB Electronics Identification
761M - Type Number. 761MC indicates
compact design.
250V - DC Voltage Rating
106J - Capacitance and Tolerance Code
0145 - Weekly Date Code
(i.e. 45th week of 2001)
Tolerance codes
per EIA standards
H±3%
J±5%
K±10%
4
Type 761M
Metallized Polypropylene Film Capacitors
T
MAX
d
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Dimension Outline
Lead Length Table
L
MAX
Lead
Length
Lead
Length
L MAX dimension Lead Length (Typical)
0.61 (15.5) 2.00 (50.8)
0.79 (20.1) 1.90 (48.3)
0.99 (25.1) 1.80 (45.7)
1.25 (31.8) 1.65 (41.9)
1.74 (44.2) 1.40 (35.6)
2.21 (56.1) 1.25 (31.8)
Lead Wire Size and Additional Termination Options
Standard lead wire sizes utilized in manufacturing range from 0.020 (0.5) diameter [#24 AWG] to 0.040 (1.0) diameter
[#18 AWG]. We can also provide a variety of other wire sizes and material (i.e. heavier gauges, insulated wire, etc.).
If the wire size or material listed on our standard items doesn’t meet your specific requirements please contact us.
In all cases a MINIMUM lead length of 1.25 (31.8) will be met.
5
Wire Lead Termination (see lead length table below)
Tinned Solid Copper Lug Termination*
T
MAX
0.032 (0.8)
±0.002 (0.05)
0.360 (9.1)
±0.005 (0.13)
L
MAX
LC
±0.060 (1.5)
LC = L MAX + 0.48 (12.2)
0.312 (7.9)
MIN.
0.156 (4.0)
±0.005 (0.13)
DIA.
*Please note: Lug terminations are available on units 0.55 (14.0) or greater in
Thickness. Please refer to Sizes and Ratings information for available values. If you
have a specific requirement other than what you find shown here please contact us.
H
MAX
H
MAX
Type 761M
Metallized Polypropylene Film Capacitors
1
Please refer to Ordering/Part Number page for specific part numbering details.
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Type 761M Sizes and Ratings – 160 VDC/100 VAC
Cap Base Standard Dimensions/Ratings
1
dV/dt
2
ESR-mΩ Compact Dimensions/Ratings
1
dV
/
dt
2
ESR-mΩ
(µF) Part # L MAX T MAX H MAX Wire (d) V/µsec @100KHz L MAX T MAX H MAX Wire (d) V/µsec @100KHz
0.15 761M15451 0.61 (15.5) 0.17 (4.3) 0.27 (6.9) 0.020 (0.5) 6 20.9
0.18 761M18451 0.61 (15.5) 0.19 (4.8) 0.29 (7.4) 0.020 (0.5) 6 18.1
0.2 761M20451 0.61 (15.5) 0.20 (5.1) 0.30 (7.6) 0.020 (0.5) 6 16.7
0.22 761M22451 0.79 (20.1) 0.16 (4.1) 0.26 (6.6) 0.020 (0.5) 3 33.1 0.61 (15.5) 0.21 (0.5) 0.31 (7.9) 0.020 (0.5) 9 15.6
0.25 761M25451 0.79 (20.1) 0.17 (4.3) 0.27 (6.9) 0.020 (0.5) 3 29.6 0.61 (15.5) 0.23 (5.8) 0.33 (8.4) 0.020 (0.5) 12 14.3
0.27 761M27451 0.79 (20.1) 0.18 (4.6) 0.28 (7.1) 0.020 (0.5) 3 27.7 0.61 (15.5) 0.24 (6.1) 0.34 (8.6) 0.020 (0.5) 15 13.6
0.3 761M30451 0.79 (20.1) 0.18 (4.6) 0.30 (7.6) 0.020 (0.5) 3 25.5 0.61 (15.5) 0.25 (6.4) 0.35 (8.9) 0.020 (0.5) 17 12.8
0.33 761M33451 0.79 (20.1) 0.19 (4.8) 0.31 (7.9) 0.020 (0.5) 3 23.6 0.61 (15.5) 0.27 (6.9) 0.37 (9.4) 0.020 (0.5) 19 12.1
0.39 761M39451 0.79 (20.1) 0.19 (4.8) 0.37 (9.4) 0.020 (0.5) 6 21.2 0.61 (15.5) 0.26 (6.6) 0.44 (11.2) 0.020 (0.5) 32 11.7
0.43 761M43451 0.99 (25.1) 0.18 (4.6) 0.31 (7.9) 0.020 (0.5) 2 34.4 0.79 (20.1) 0.22 (5.6) 0.34 (8.6) 0.025 (0.6) 8 16.3
0.47 761M47451 0.99 (25.1) 0.18 (4.6) 0.33 (8.4) 0.020 (0.5) 2 32.1 0.79 (20.1) 0.22 (5.6) 0.37 (9.4) 0.025 (0.6) 9 15.0
0.5 761M50451 0.99 (25.1) 0.19 (4.8) 0.34 (8.6) 0.020 (0.5) 3 30.5 0.79 (20.1) 0.23 (5.8) 0.38 (9.7) 0.025 (0.6) 10 14.2
0.56 761M56451 0.99 (25.1) 0.20 (5.1) 0.35 (8.9) 0.025 (0.6) 4 24.7 0.79 (20.1) 0.24 (6.1) 0.40 (10.2) 0.025 (0.6) 11 12.8
0.6 761M60451 0.99 (25.1) 0.21 (5.3) 0.36 (9.1) 0.025 (0.6) 5 23.1 0.79 (20.1) 0.25 (6.4) 0.41 (10.4) 0.025 (0.6) 12 12.0
0.68 761M68451 0.99 (25.1) 0.22 (5.6) 0.38 (9.7) 0.025 (0.6) 6 20.5 0.79 (20.1) 0.27 (6.9) 0.43 (10.9) 0.032 (0.8) 19 10.4
0.75 761M75451 0.99 (25.1) 0.24 (6.1) 0.39 (9.9) 0.025 (0.6) 7 18.7 0.79 (20.1) 0.29 (7.4) 0.44 (11.2) 0.032 (0.8) 19 9.5
0.82 761M82451 0.99 (25.1) 0.25 (6.4) 0.40 (10.2) 0.025 (0.6) 8 17.2 0.79 (20.1) 0.30 (7.6) 0.46 (11.7) 0.032 (0.8) 20 8.8
0.9 761M90451 0.99 (25.1) 0.25 (6.4) 0.43 (10.9) 0.025 (0.6) 13 15.8 0.79 (20.1) 0.32 (8.1) 0.48 (12.2) 0.032 (0.8) 20 8.1
1.0 761M10551 0.99 (25.1) 0.27 (6.9) 0.45 (11.4) 0.032 (0.8) 13 14.0 0.79 (20.1) 0.34 (8.6) 0.50 (12.7) 0.032 (0.8) 20 7.4
1.2 761M12551 1.25 (31.8) 0.25 (6.4) 0.43 (10.9) 0.025 (0.6) 9 20.6 0.99 (25.1) 0.30 (7.6) 0.48 (12.2) 0.032 (0.8) 14 11.8
1.5 761M15551 1.25 (31.8) 0.28 (7.1) 0.47 (11.9) 0.032 (0.8) 10 16.3 0.99 (25.1) 0.34 (8.6) 0.52 (13.2) 0.032 (0.8) 14 9.7
1.8 761M18551 1.25 (31.8) 0.29 (7.4) 0.54 (13.7) 0.032 (0.8) 10 13.8 0.99 (25.1) 0.35 (8.9) 0.59 (15.0) 0.032 (0.8) 14 8.3
2.0 761M20551 1.25 (31.8) 0.31 (7.9) 0.56 (14.2) 0.032 (0.8) 10 12.5 0.99 (25.1) 0.37 (9.4) 0.62 (15.7) 0.032 (0.8) 15 7.6
2.2 761M22551 1.25 (31.8) 0.33 (8.4) 0.57 (14.5) 0.032 (0.8) 11 11.5 0.99 (25.1) 0.39 (9.9) 0.64 (16.3) 0.032 (0.8) 15 7.0
2.5 761M25551 1.25 (31.8) 0.35 (8.9) 0.60 (15.2) 0.032 (0.8) 11 10.3 0.99 (25.1) 0.42 (10.7) 0.67 (17.0) 0.032 (0.8) 15 6.3
2.7 761M27551 1.74 (44.2) 0.28 (7.1) 0.53 (13.5) 0.032 (0.8) 7 21.4 1.25 (31.8) 0.37 (9.4) 0.62 (15.7) 0.032 (0.8) 11 9.6
3.0 761M30551 1.74 (44.2) 0.30 (7.6) 0.55 (14.0) 0.032 (0.8) 7 19.3 1.25 (31.8) 0.39 (9.9) 0.64 (16.3) 0.032 (0.8) 11 8.8
3.3 761M33551 1.74 (44.2) 0.32 (8.1) 0.57 (14.5) 0.032 (0.8) 7 17.7 1.25 (31.8) 0.42 (10.7) 0.67 (17.0) 0.032 (0.8) 11 8.1
3.6 761M36551 1.74 (44.2) 0.34 (8.6) 0.59 (15.0) 0.032 (0.8) 7 16.3 1.25 (31.8) 0.44 (11.2) 0.69 (17.5) 0.032 (0.8) 11 7.5
3.9 761M39551 1.74 (44.2) 0.35 (8.9) 0.60 (15.2) 0.032 (0.8) 7 15.1 1.25 (31.8) 0.46 (11.7) 0.71 (18.0) 0.032 (0.8) 11 7.0
4.7 761M47551 1.74 (44.2) 0.40 (10.2) 0.64 (16.3) 0.032 (0.8) 7 12.8 1.25 (31.8) 0.52 (13.2) 0.76 (19.3) 0.032 (0.8) 11 6.1
5.0 761M50551 1.74 (44.2) 0.41 (10.4) 0.66 (16.8) 0.032 (0.8) 7 12.1 1.25 (31.8) 0.53 (13.5) 0.78 (19.8) 0.032 (0.8) 11 5.8
5.6 761M56551 2.21 (56.1) 0.34 (8.6) 0.65 (16.5) 0.032 (0.8) 5 19.1 1.74 (44.2) 0.39 (9.9) 0.76 (19.3) 0.032 (0.8) 7 11.0
6.0 761M60551 2.21 (56.1) 0.36 (9.1) 0.67 (17.0) 0.032 (0.8) 5 17.9 1.74 (44.2) 0.41 (10.4) 0.78 (19.8) 0.032 (0.8) 7 10.4
6.8 761M68551 2.21 (56.1) 0.39 (9.9) 0.69 (17.5) 0.032 (0.8) 5 15.9 1.74 (44.2) 0.44 (11.2) 0.81 (20.6) 0.032 (0.8) 7 9.4
7.0 761M70551 2.21 (56.1) 0.39 (9.9) 0.70 (17.8) 0.032 (0.8) 5 15.5 1.74 (44.2) 0.45 (11.4) 0.82 (20.8) 0.032 (0.8) 7 9.1
7.5 761M75551 2.21 (56.1) 0.41 (10.4) 0.72 (18.3) 0.032 (0.8) 5 14.6 1.74 (44.2) 0.47 (11.9) 0.84 (21.3) 0.032 (0.8) 7 8.6
8.0 761M80551 2.21 (56.1) 0.43 (10.9) 0.74 (18.8) 0.032 (0.8) 5 13.8 1.74 (44.2) 0.49 (12.4) 0.86 (21.8) 0.032 (0.8) 7 8.2
9.0 761M90551 2.21 (56.1) 0.46 (11.7) 0.77 (19.6) 0.032 (0.8) 5 12.4 1.74 (44.2) 0.52 (13.2) 0.90 (22.9) 0.032 (0.8) 7 7.5
10.0 761M10651 2.21 (56.1) 0.49 (12.4) 0.80 (20.3) 0.032 (0.8) 5 11.3 1.74 (44.2) 0.56 (14.2) 0.93 (23.6) 0.032 (0.8) 7 6.9
12.0 761M12651 2.21 (56.1) 0.55 (14.0) 0.86 (21.8) 0.040 (1.0) 5 9.2 1.74 (44.2) 0.63 (16.0) 1.00 (25.4) 0.040 (1.0) 7 5.5
15.0 761M15651 2.21 (56.1) 0.60 (15.2) 0.97 (24.6) 0.040 (1.0) 5 7.6 1.74 (44.2) 0.72 (18.3) 1.09 (27.7) 0.040 (1.0) 7 4.7
18.0 761M18651 2.21 (56.1) 0.67 (17.0) 1.04 (26.4) 0.040 (1.0) 5 6.6 1.74 (44.2) 0.80 (20.3) 1.17 (29.7) 0.040 (1.0) 7 4.1
20.0 761M20651 2.21 (56.1) 0.71 (18.0) 1.08 (27.4) 0.040 (1.0) 5 6.0 1.74 (44.2) 0.85 (21.6) 1.22 (31.0) 0.040 (1.0) 8 3.9
22.0 761M22651 2.21 (56.1) 0.75 (19.1) 1.12 (28.4) 0.040 (1.0) 6 5.6 1.74 (44.2) 0.90 (22.9) 1.27 (32.3) 0.040 (1.0) 8 3.7
25.0 761M25651 2.21 (56.1) 0.81 (20.6) 1.18 (30.0) 0.040 (1.0) 6 5.1 1.74 (44.2) 0.97 (24.6) 1.34 (34.0) 0.040 (1.0) 8 3.4
30.0 761M30651 2.21 (56.1) 0.90 (22.9) 1.28 (32.5) 0.040 (1.0) 6 4.5 1.74 (44.2) 1.08 (27.4) 1.45 (36.8) 0.040 (1.0) 8 3.2
35.0 761M35651 2.21 (56.1) 0.99 (25.1) 1.36 (34.5) 0.040 (1.0) 6 4.1 1.74 (44.2) 1.18 (30.0) 1.55 (39.4) 0.040 (1.0) 8 3.0
40.0 761M40651 2.21 (56.1) 1.07 (27.2) 1.44 (36.6) 0.040 (1.0) 6 3.8 1.74 (44.2) 1.27 (32.3) 1.65 (41.9) 0.040 (1.0) 8 2.9
45.0 761M45651 2.21 (56.1) 1.14 (29.0) 1.52 (38.6) 0.040 (1.0) 6 3.6 1.74 (44.2) 1.36 (34.5) 1.73 (43.9) 0.040 (1.0) 8 2.8
50.0 761M50651 2.21 (56.1) 1.22 (31.0) 1.59 (40.4) 0.040 (1.0) 6 3.5
55.0 761M55651 2.21 (56.1) 1.28 (32.5) 1.65 (41.9) 0.040 (1.0) 6 3.3
60.0 761M60651 2.21 (56.1) 1.35 (34.3) 1.72 (43.7) 0.040 (1.0) 6 3.2
65.0 761M65651 2.21 (56.1) 1.41 (35.8) 1.78 (45.2) 0.040 (1.0) 6 3.2
6
2
ESR ratings listed are Maximum. Please contact us for additional ESR data.
Type 761M
Metallized Polypropylene Film Capacitors
1
Please refer to Ordering/Part Number page for specific part numbering details.
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Type 761M Sizes and Ratings – 250 VDC/175 VAC
Cap Base Standard Dimensions/Ratings
1
dV/dt
2
ESR-mΩ Compact Dimensions/Ratings
1
dV
/
dt
2
ESR-mΩ
(µF) Part # L MAX T MAX H MAX Wire (d) V/µsec @100KHz L MAX T MAX H MAX Wire (d) V/µsec @100KHz
0.068 761M68352 0.61 (15.5) 0.17 (4.3) 0.27 (6.9) 0.020 (0.5) 9 31.0
0.075 761M75352 0.61 (15.5) 0.18 (4.6) 0.27 (6.9) 0.020 (0.5) 9 28.5
0.082 761M82352 0.61 (15.5) 0.19 (4.8) 0.29 (7.4) 0.020 (0.5) 9 26.5
0.1 761M10452 0.79 (20.1) 0.16 (4.1) 0.26 (6.6) 0.020 (0.5) 5 48.5 0.61 (15.5) 0.21 (5.3) 0.31 (7.9) 0.020 (0.5) 13 22.5
0.12 761M12452 0.79 (20.1) 0.18 (4.6) 0.28 (7.1) 0.020 (0.5) 5 41.0 0.61 (15.5) 0.24 (6.1) 0.34 (8.6) 0.020 (0.5) 21 19.6
0.15 761M15452 0.79 (20.1) 0.20 (5.1) 0.30 (7.6) 0.025 (0.6) 5 31.1 0.61 (15.5) 0.27 (6.9) 0.37 (9.4) 0.020 (0.5) 29 16.7
0.18 761M18452 0.79 (20.1) 0.21 (5.3) 0.34 (8.6) 0.025 (0.6) 9 26.1 0.61 (15.5) 0.26 (6.6) 0.45 (11.4) 0.020 (0.5) 48 15.5
0.2 761M20452 0.99 (25.1) 0.20 (5.1) 0.30 (7.6) 0.025 (0.6) 4 45.8 0.79 (20.1) 0.23 (5.8) 0.33 (8.4) 0.025 (0.6) 12 23.6
0.22 761M22452 0.99 (25.1) 0.20 (5.1) 0.32 (8.1) 0.025 (0.6) 4 41.8 0.79 (20.1) 0.24 (6.1) 0.36 (9.1) 0.025 (0.6) 14 21.6
0.25 761M25452 0.99 (25.1) 0.21 (5.3) 0.34 (8.6) 0.025 (0.6) 7 36.9 0.79 (20.1) 0.26 (6.6) 0.38 (9.7) 0.032 (0.8) 17 18.8
0.27 761M27452 0.99 (25.1) 0.22 (5.6) 0.35 (8.9) 0.025 (0.6) 8 34.2 0.79 (20.1) 0.27 (6.9) 0.39 (9.9) 0.032 (0.8) 18 17.5
0.3 761M30452 0.99 (25.1) 0.24 (6.1) 0.36 (9.1) 0.025 (0.6) 10 30.9 0.79 (20.1) 0.28 (7.1) 0.41 (10.4) 0.032 (0.8) 20 15.8
0.33 761M33452 0.99 (25.1) 0.25 (6.4) 0.37 (9.4) 0.025 (0.6) 11 28.2 0.79 (20.1) 0.30 (7.6) 0.42 (10.7) 0.032 (0.8) 21 14.4
0.39 761M39452 0.99 (25.1) 0.26 (6.6) 0.41 (10.4) 0.032 (0.8) 13 23.7 0.79 (20.1) 0.31 (7.9) 0.47 (11.9) 0.032 (0.8) 30 12.4
0.43 761M43452 0.99 (25.1) 0.27 (6.9) 0.43 (10.9) 0.032 (0.8) 20 21.6 0.79 (20.1) 0.33 (8.4) 0.49 (12.4) 0.032 (0.8) 30 11.3
0.47 761M47452 0.99 (25.1) 0.29 (7.4) 0.44 (11.2) 0.032 (0.8) 20 19.8 0.79 (20.1) 0.35 (8.9) 0.50 (12.7) 0.032 (0.8) 31 10.4
0.5 761M50452 1.25 (31.8) 0.27 (6.9) 0.39 (9.9) 0.032 (0.8) 9 32.1 0.99 (25.1) 0.30 (7.6) 0.45 (11.4) 0.032 (0.8) 20 18.7
0.56 761M56452 1.25 (31.8) 0.27 (6.9) 0.42 (10.7) 0.032 (0.8) 10 28.8 0.99 (25.1) 0.32 (8.1) 0.47 (11.9) 0.032 (0.8) 21 16.8
0.6 761M60452 1.25 (31.8) 0.28 (7.1) 0.43 (10.9) 0.032 (0.8) 15 26.9 0.99 (25.1) 0.33 (8.4) 0.49 (12.4) 0.032 (0.8) 21 15.7
0.68 761M68452 1.25 (31.8) 0.29 (7.4) 0.47 (11.9) 0.032 (0.8) 15 23.9 0.99 (25.1) 0.34 (8.6) 0.53 (13.5) 0.032 (0.8) 21 14.0
0.75 761M75452 1.25 (31.8) 0.30 (7.6) 0.49 (12.4) 0.032 (0.8) 15 21.7 0.99 (25.1) 0.36 (9.1) 0.55 (14.0) 0.032 (0.8) 21 12.8
0.82 761M82452 1.25 (31.8) 0.32 (8.1) 0.51 (13.0) 0.032 (0.8) 16 20.0 0.99 (25.1) 0.38 (9.7) 0.57 (14.5) 0.032 (0.8) 22 11.8
0.9 761M90452 1.25 (31.8) 0.34 (8.6) 0.52 (13.2) 0.032 (0.8) 16 18.3 0.99 (25.1) 0.40 (10.2) 0.59 (15.0) 0.032 (0.8) 22 10.9
1.0 761M10552 1.25 (31.8) 0.33 (8.4) 0.58 (14.7) 0.032 (0.8) 16 16.6 0.99 (25.1) 0.43 (10.9) 0.61 (15.5) 0.032 (0.8) 22 9.9
1.2 761M12552 1.74 (44.2) 0.28 (7.1) 0.53 (13.5) 0.032 (0.8) 10 31.8 1.25 (31.8) 0.37 (9.4) 0.62 (15.7) 0.032 (0.8) 16 14.0
1.5 761M15552 1.74 (44.2) 0.33 (8.4) 0.57 (14.5) 0.032 (0.8) 10 25.6 1.25 (31.8) 0.42 (10.7) 0.67 (17.0) 0.032 (0.8) 17 11.5
1.8 761M18552 1.74 (44.2) 0.36 (9.1) 0.61 (15.5) 0.032 (0.8) 10 21.6 1.25 (31.8) 0.47 (11.9) 0.72 (18.3) 0.032 (0.8) 17 9.8
2.0 761M20552 1.74 (44.2) 0.39 (9.9) 0.63 (16.0) 0.032 (0.8) 11 19.5 1.25 (31.8) 0.50 (12.7) 0.75 (19.1) 0.032 (0.8) 17 9.0
2.2 761M22552 2.21 (56.1) 0.34 (8.6) 0.59 (15.0) 0.032 (0.8) 8 31.7 1.74 (44.2) 0.36 (9.1) 0.73 (18.5) 0.032 (0.8) 11 18.0
2.5 761M25552 2.21 (56.1) 0.37 (9.4) 0.62 (15.7) 0.032 (0.8) 8 28.0 1.74 (44.2) 0.39 (9.9) 0.76 (19.3) 0.032 (0.8) 11 16.0
2.7 761M27552 2.21 (56.1) 0.39 (9.9) 0.63 (16.0) 0.032 (0.8) 8 26.0 1.74 (44.2) 0.41 (10.4) 0.78 (19.8) 0.032 (0.8) 11 14.9
3.0 761M30552 2.21 (56.1) 0.38 (9.7) 0.69 (17.5) 0.032 (0.8) 8 23.6 1.74 (44.2) 0.44 (11.2) 0.81 (20.6) 0.032 (0.8) 11 13.6
3.3 761M33552 2.21 (56.1) 0.41 (10.4) 0.72 (18.3) 0.032 (0.8) 8 21.6 1.74 (44.2) 0.47 (11.9) 0.84 (21.3) 0.032 (0.8) 11 12.5
3.6 761M36552 2.21 (56.1) 0.43 (10.9) 0.74 (18.8) 0.032 (0.8) 8 19.9 1.74 (44.2) 0.49 (12.4) 0.86 (21.8) 0.032 (0.8) 11 11.6
3.9 761M39552 2.21 (56.1) 0.45 (11.4) 0.76 (19.3) 0.032 (0.8) 8 18.5 1.74 (44.2) 0.52 (13.2) 0.89 (22.6) 0.032 (0.8) 11 10.8
4.7 761M47552 2.21 (56.1) 0.51 (13.0) 0.82 (20.8) 0.040 (1.0) 8 15.2 1.74 (44.2) 0.58 (14.7) 0.95 (24.1) 0.040 (1.0) 11 8.8
5.0 761M50552 2.21 (56.1) 0.53 (13.5) 0.84 (21.3) 0.040 (1.0) 8 14.3 1.74 (44.2) 0.60 (15.2) 0.97 (24.6) 0.040 (1.0) 11 8.3
5.6 761M56552 2.21 (56.1) 0.56 (14.2) 0.87 (22.1) 0.040 (1.0) 8 12.9 1.74 (44.2) 0.65 (16.5) 1.02 (25.9) 0.040 (1.0) 11 7.6
6.0 761M60552 2.21 (56.1) 0.59 (15.0) 0.90 (22.9) 0.040 (1.0) 8 12.1 1.74 (44.2) 0.67 (17.0) 1.04 (26.4) 0.040 (1.0) 11 7.1
6.8 761M68552 2.21 (56.1) 0.60 (15.2) 0.97 (24.6) 0.040 (1.0) 8 10.8 1.74 (44.2) 0.73 (18.5) 1.10 (27.9) 0.040 (1.0) 11 6.5
7.0 761M70552 2.21 (56.1) 0.61 (15.5) 0.99 (25.1) 0.040 (1.0) 8 10.6 1.74 (44.2) 0.74 (18.8) 1.11 (28.2) 0.040 (1.0) 11 6.3
7.5 761M75552 2.21 (56.1) 0.64 (16.3) 1.01 (25.7) 0.040 (1.0) 8 10.0 1.74 (44.2) 0.71 (18.0) 1.21 (30.7) 0.040 (1.0) 11 6.0
8.0 761M80552 2.21 (56.1) 0.67 (17.0) 1.04 (26.4) 0.040 (1.0) 8 9.4 1.74 (44.2) 0.74 (18.8) 1.24 (31.5) 0.040 (1.0) 11 5.8
9.0 761M90552 2.21 (56.1) 0.72 (18.3) 1.09 (27.7) 0.040 (1.0) 8 8.5 1.74 (44.2) 0.80 (20.3) 1.29 (32.8) 0.040 (1.0) 11 5.3
10.0 761M10652 2.21 (56.1) 0.76 (19.3) 1.13 (28.7) 0.040 (1.0) 8 7.8 1.74 (44.2) 0.85 (21.6) 1.35 (34.3) 0.040 (1.0) 11 4.9
12.0 761M12652 2.21 (56.1) 0.85 (21.6) 1.22 (31.0) 0.040 (1.0) 8 6.7 1.74 (44.2) 0.95 (24.1) 1.45 (36.8) 0.040 (1.0) 11 4.4
15.0 761M15652 2.21 (56.1) 0.97 (24.6) 1.34 (34.0) 0.040 (1.0) 8 5.7 1.74 (44.2) 1.09 (27.7) 1.59 (40.4) 0.040 (1.0) 11 3.9
18.0 761M18652 2.21 (56.1) 1.08 (27.4) 1.45 (36.8) 0.040 (1.0) 8 5.1 1.74 (44.2) 1.22 (31.0) 1.71 (43.4) 0.040 (1.0) 11 3.6
20.0 761M20652 2.21 (56.1) 1.14 (29.0) 1.52 (38.6) 0.040 (1.0) 8 4.8 1.74 (44.2) 1.30 (33.0) 1.79 (45.5) 0.040 (1.0) 11 3.5
22.0 761M22652 2.21 (56.1) 1.21 (30.7) 1.58 (40.1) 0.040 (1.0) 8 4.5
25.0 761M25652 2.21 (56.1) 1.30 (33.0.) 1.67 (42.4) 0.040 (1.0) 8 4.2
7
2
ESR ratings listed are Maximum. Please contact us for additional ESR data.
Type 761M
Metallized Polypropylene Film Capacitors
1
Please refer to Ordering/Part Number page for specific part numbering details.
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Type 761M Sizes and Ratings – 400 VDC/220 VAC
Cap Base Standard Dimensions/Ratings
1
dV/dt
2
ESR-mΩ Compact Dimensions/Ratings
1
dV
/
dt
2
ESR-mΩ
(µF) Part # L MAX T MAX H MAX Wire (d) V/µsec @100KHz L MAX T MAX H MAX Wire (d) V/µsec @100KHz
0.033 761M33354 0.61 (15.5) 0.17 (4.3) 0.27 (6.9) 0.020 (0.5) 14 42.3
0.036 761M36354 0.61 (15.5) 0.18 (4.6) 0.28 (7.1) 0.020 (0.5) 14 39.1
0.039 761M39354 0.61 (15.5) 0.19 (4.8) 0.29 (7.4) 0.020 (0.5) 14 36.5
0.043 761M43354 0.61 (15.5) 0.20 (5.1) 0.30 (7.6) 0.020 (0.5) 14 33.5
0.047 761M47354 0.79 (20.1) 0.15 (3.8) 0.25 (6.4) 0.020 (0.5) 8 70.3 0.61 (15.5) 0.21 (5.3) 0.31 (7.9) 0.020 (0.5) 16 31.0
0.05 761M50354 0.79 (20.1) 0.16 (4.1) 0.25 (6.4) 0.020 (0.5) 8 66.3 0.61 (15.5) 0.22 (5.6) 0.31 (7.9) 0.020 (0.5) 21 29.4
0.056 761M56354 0.79 (20.1) 0.16 (4.1) 0.26 (6.6) 0.020 (0.5) 8 59.6 0.61 (15.5) 0.23 (5.8) 0.33 (8.4) 0.020 (0.5) 29 26.8
0.062 761M62354 0.79 (20.1) 0.17 (4.3) 0.27 (6.9) 0.020 (0.5) 8 54.2 0.61 (15.5) 0.24 (6.1) 0.34 (8.6) 0.020 (0.5) 35 24.7
0.068 761M68354 0.79 (20.1) 0.18 (4.6) 0.28 (7.1) 0.020 (0.5) 8 49.8 0.61 (15.5) 0.26 (6.6) 0.35 (8.9) 0.020 (0.5) 40 23.0
0.075 761M75354 0.99 (25.1) 0.17 (4.3) 0.26 (6.6) 0.020 (0.5) 5 88.5 0.79 (20.1) 0.19 (4.8) 0.29 (7.4) 0.025 (0.6) 8 43.0
0.082 761M82354 0.99 (25.1) 0.16 (4.1) 0.29 (7.4) 0.020 (0.5) 5 81.4 0.79 (20.1) 0.19 (4.8) 0.32 (8.1) 0.025 (0.6) 8 39.4
0.1 761M10454 0.99 (25.1) 0.18 (4.6) 0.31 (7.9) 0.020 (0.5) 5 67.6 0.79 (20.1) 0.22 (5.6) 0.34 (8.6) 0.025 (0.6) 15 32.5
0.12 761M12454 0.99 (25.1) 0.20 (5.1) 0.32 (8.1) 0.025 (0.6) 7 54.3 0.79 (20.1) 0.24 (6.1) 0.37 (9.4) 0.025 (0.6) 21 27.3
0.15 761M15454 0.99 (25.1) 0.21 (5.3) 0.37 (9.4) 0.025 (0.6) 12 43.6 0.79 (20.1) 0.27 (6.9) 0.40 (10.2) 0.032 (0.8) 27 21.7
0.18 761M18454 0.99 (25.1) 0.24 (6.1) 0.39 (9.9) 0.025 (0.6) 15 36.6 0.79 (20.1) 0.28 (7.1) 0.46 (11.7) 0.032 (0.8) 42 18.3
0.2 761M20454 0.99 (25.1) 0.25 (6.4) 0.41 (10.4) 0.025 (0.6) 17 33.0 0.79 (20.1) 0.30 (7.6) 0.48 (12.2) 0.032 (0.8) 43 16.6
0.22 761M22454 0.99 (25.1) 0.25 (6.4) 0.44 (11.2) 0.025 (0.6) 27 30.2 0.79 (20.1) 0.31 (7.9) 0.50 (12.7) 0.032 (0.8) 43 15.1
0.25 761M25454 1.25 (31.8) 0.23 (5.8) 0.41 (10.4) 0.025 (0.6) 11 46.6 0.99 (25.1) 0.27 (6.9) 0.46 (11.7) 0.032 (0.8) 28 26.3
0.27 761M27454 1.25 (31.8) 0.24 (6.1) 0.42 (10.7) 0.025 (0.6) 12 43.2 0.99 (25.1) 0.26 (6.6) 0.51 (13.0) 0.032 (0.8) 28 24.5
0.3 761M30454 1.25 (31.8) 0.25 (6.4) 0.44 (11.2) 0.025 (0.6) 20 39.0 0.99 (25.1) 0.28 (7.1) 0.53 (13.5) 0.032 (0.8) 28 22.2
0.33 761M33454 1.25 (31.8) 0.27 (6.9) 0.45 (11.4) 0.032 (0.8) 20 35.2 0.99 (25.1) 0.29 (7.4) 0.54 (13.7) 0.032 (0.8) 29 20.2
0.39 761M39454 1.25 (31.8) 0.27 (6.9) 0.52 (13.2) 0.032 (0.8) 21 30.0 0.99 (25.1) 0.33 (8.4) 0.57 (14.5) 0.032 (0.8) 30 17.3
0.43 761M43454 1.25 (31.8) 0.29 (7.4) 0.53 (13.5) 0.032 (0.8) 21 27.3 0.99 (25.1) 0.35 (8.9) 0.59 (15.0) 0.032 (0.8) 30 15.8
0.47 761M47454 1.25 (31.8) 0.30 (7.6) 0.55 (14.0) 0.032 (0.8) 21 25.1 0.99 (25.1) 0.37 (9.4) 0.61 (15.5) 0.032 (0.8) 30 14.5
0.5 761M50454 1.25 (31.8) 0.31 (7.9) 0.56 (14.2) 0.032 (0.8) 21 23.6 0.99 (25.1) 0.38 (9.7) 0.63 (16.0) 0.032 (0.8) 30 13.7
0.56 761M56454 1.25 (31.8) 0.34 (8.6) 0.58 (14.7) 0.032 (0.8) 22 21.2 0.99 (25.1) 0.41 (10.4) 0.65 (16.5) 0.032 (0.8) 31 12.4
0.6 761M60454 1.74 (44.2) 0.27 (6.9) 0.52 (13.2) 0.032 (0.8) 13 46.5 1.25 (31.8) 0.35 (8.9) 0.60 (15.2) 0.032 (0.8) 22 19.9
0.68 761M68454 1.74 (44.2) 0.29 (7.4) 0.54 (13.7) 0.032 (0.8) 13 41.1 1.25 (31.8) 0.38 (9.7) 0.63 (16.0) 0.032 (0.8) 22 17.7
0.75 761M75454 1.74 (44.2) 0.31 (7.9) 0.55 (14.0) 0.032 (0.8) 13 37.4 1.25 (31.8) 0.40 (10.2) 0.65 (16.5) 0.032 (0.8) 22 16.1
0.82 761M82454 1.74 (44.2) 0.32 (8.1) 0.57 (14.5) 0.032 (0.8) 14 34.3 1.25 (31.8) 0.42 (10.7) 0.67 (17.0) 0.032 (0.8) 23 14.9
0.9 761M90454 1.74 (44.2) 0.34 (8.6) 0.59 (15.0) 0.032 (0.8) 14 31.3 1.25 (31.8) 0.45 (11.4) 0.69 (17.5) 0.032 (0.8) 23 13.7
1.0 761M10554 1.74 (44.2) 0.36 (9.1) 0.61 (15.5) 0.032 (0.8) 14 28.3 1.25 (31.8) 0.48 (12.2) 0.72 (18.3) 0.032 (0.8) 23 12.5
1.2 761M12554 2.21 (56.1) 0.34 (8.6) 0.58 (14.7) 0.032 (0.8) 10 43.0 1.74 (44.2) 0.38 (9.7) 0.69 (17.5) 0.032 (0.8) 14 23.9
1.5 761M15554 2.21 (56.1) 0.38 (9.7) 0.63 (16.0) 0.032 (0.8) 10 34.6 1.74 (44.2) 0.44 (11.2) 0.74 (18.8) 0.032 (0.8) 14 19.4
1.8 761M18554 2.21 (56.1) 0.43 (10.9) 0.68 (17.3) 0.032 (0.8) 10 29.1 1.74 (44.2) 0.49 (12.4) 0.80 (20.3) 0.032 (0.8) 15 16.4
2.0 761M20554 2.21 (56.1) 0.46 (11.7) 0.70 (17.8) 0.032 (0.8) 11 26.3 1.74 (44.2) 0.52 (13.2) 0.83 (21.1) 0.032 (0.8) 15 14.9
2.2 761M22554 2.21 (56.1) 0.45 (11.4) 0.76 (19.3) 0.032 (0.8) 11 24.1 1.74 (44.2) 0.55 (14.0) 0.86 (21.8) 0.032 (0.8) 15 13.7
2.5 761M25554 2.21 (56.1) 0.49 (12.4) 0.80 (20.3) 0.032 (0.8) 11 21.4 1.74 (44.2) 0.59 (15.0) 0.90 (22.9) 0.032 (0.8) 15 12.3
2.7 761M27554 2.21 (56.1) 0.51 (13.0) 0.82 (20.8) 0.040 (1.0) 11 19.5 1.74 (44.2) 0.62 (15.7) 0.93 (23.6) 0.040 (1.0) 15 11.0
3.0 761M30554 2.21 (56.1) 0.55 (14.0) 0.86 (21.8) 0.040 (1.0) 11 17.6 1.74 (44.2) 0.63 (16.0) 1.00 (25.4) 0.040 (1.0) 15 10.0
3.3 761M33554 2.21 (56.1) 0.58 (14.7) 0.89 (22.6) 0.040 (1.0) 11 16.1 1.74 (44.2) 0.67 (17.0) 1.04 (26.4) 0.040 (1.0) 15 9.2
3.6 761M36554 2.21 (56.1) 0.61 (15.5) 0.92 (23.4) 0.040 (1.0) 11 14.9 1.74 (44.2) 0.70 (17.8) 1.08 (27.4) 0.040 (1.0) 15 8.6
3.9 761M39554 2.21 (56.1) 0.64 (16.3) 0.95 (24.1) 0.040 (1.0) 11 13.8 1.74 (44.2) 0.74 (18.8) 1.11 (28.2) 0.040 (1.0) 15 8.0
4.7 761M47554 2.21 (56.1) 0.68 (17.3) 1.06 (26.9) 0.040 (1.0) 11 11.7 1.74 (44.2) 0.83 (21.1) 1.20 (30.5) 0.040 (1.0) 15 6.9
5.0 761M50554 2.21 (56.1) 0.71 (18.0) 1.08 (27.4) 0.040 (1.0) 11 11.1 1.74 (44.2) 0.86 (21.8) 1.23 (31.2) 0.040 (1.0) 15 6.6
5.6 761M56554 2.21 (56.1) 0.76 (19.3) 1.13 (28.7) 0.040 (1.0) 11 10.0 1.74 (44.2) 0.92 (23.4) 1.29 (32.8) 0.040 (1.0) 15 6.1
6.0 761M60554 2.21 (56.1) 0.79 (20.1) 1.16 (29.5) 0.040 (1.0) 11 9.5 1.74 (44.2) 0.89 (22.6) 1.39 (35.3) 0.040 (1.0) 15 5.8
6.8 761M68554 2.21 (56.1) 0.85 (21.6) 1.22 (31.0) 0.040 (1.0) 11 8.5 1.74 (44.2) 0.96 (24.4) 1.46 (37.1) 0.040 (1.0) 15 5.3
7.0 761M70554 2.21 (56.1) 0.87 (22.1) 1.24 (31.5) 0.040 (1.0) 11 8.3 1.74 (44.2) 0.98 (24.9) 1.48 (37.6) 0.040 (1.0) 15 5.2
7.5 761M75554 2.21 (56.1) 0.90 (22.9) 1.28 (32.5) 0.040 (1.0) 11 7.9 1.74 (44.2) 1.02 (25.9) 1.52 (38.6) 0.040 (1.0) 15 5.0
8.0 761M80554 2.21 (56.1) 0.94 (23.9) 1.31 (33.3) 0.040 (1.0) 11 7.5 1.74 (44.2) 1.06 (26.9) 1.56 (39.6) 0.040 (1.0) 15 4.8
9.0 761M90554 2.21 (56.1) 1.01 (25.7) 1.38 (35.1) 0.040 (1.0) 11 6.9 1.74 (44.2) 1.14 (29.0) 1.64 (41.7) 0.040 (1.0) 15 4.5
10.0 761M10654 2.21 (56.1) 1.07 (27.2) 1.44 (36.6) 0.040 (1.0) 11 6.3 1.74 (44.2) 1.21 (30.7) 1.71 (43.4) 0.040 (1.0) 15 4.3
12.0 761M12654 2.21 (56.1) 1.19 (30.2) 1.56 (39.6) 0.040 (1.0) 11 5.6
15.0 761M15654 2.21 (56.1) 1.35 (34.3) 1.72 (43.7) 0.040 (1.0) 11 4.9
8
2
ESR ratings listed are Maximum. Please contact us for additional ESR data.
Type 761M
Metallized Polypropylene Film Capacitors
1
Please refer to Ordering/Part Number page for specific part numbering details.
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Type 761M Sizes and Ratings – 630 VDC/250 VAC
Cap Base Standard Dimensions/Ratings
1
dV/dt
2
ESR-mΩ Compact Dimensions/Ratings
1
dV
/
dt
2
ESR-mΩ
(µF) Part # L MAX T MAX H MAX Wire (d) V/µsec @100KHz L MAX T MAX H MAX Wire (d) V/µsec @100KHz
0.012 761M12356 0.61 (15.5) 0.17 (4.3) 0.27 (6.9) 0.020 (0.5) 25 72.5
0.015 761M15356 0.61 (15.5) 0.19 (4.8) 0.29 (7.4) 0.020 (0.5) 25 58.8
0.018 761M18356 0.61 (15.5) 0.21 (5.3) 0.31 (7.9) 0.020 (0.5) 32 49.8
0.02 761M20356 0.79 (20.1) 0.15 (3.8) 0.25 (6.4) 0.020 (0.5) 13 101.4 0.61 (15.5) 0.22 (5.6) 0.32 (8.1) 0.020 (0.5) 46 45.3
0.022 761M22356 0.79 (20.1) 0.16 (4.1) 0.26 (6.6) 0.020 (0.5) 13 92.6 0.61 (15.5) 0.23 (5.8) 0.33 (8.4) 0.020 (0.5) 58 41.6
0.025 761M25356 0.79 (20.1) 0.17 (4.3) 0.27 (6.6) 0.020 (0.5) 13 81.9 0.61 (15.5) 0.25 (6.4) 0.35 (8.9) 0.020 (0.5) 71 37.2
0.027 761M27356 0.79 (20.1) 0.18 (4.6) 0.28 (7.1) 0.020 (0.5) 13 76.1 0.61 (15.5) 0.26 (6.6) 0.36 (9.1) 0.020 (0.5) 79 34.9
0.03 761M30356 0.99 (25.1) 0.15 (3.8) 0.28 (7.1) 0.020 (0.5) 8 136.9 0.79 (20.1) 0.18 (4.6) 0.31 (7.9) 0.020 (0.5) 13 69.1
0.033 761M33356 0.99 (25.1) 0.16 (4.1) 0.29 (7.4) 0.020 (0.5) 8 124.8 0.79 (20.1) 0.19 (4.8) 0.32 (8.1) 0.025 (0.6) 13 60.5
0.036 761M36356 0.99 (25.1) 0.17 (4.3) 0.29 (7.4) 0.020 (0.5) 8 114.8 0.79 (20.1) 0.20 (5.1) 0.33 (8.4) 0.025 (0.6) 17 55.6
0.039 761M39356 0.99 (25.1) 0.18 (4.6) 0.30 (7.6) 0.020 (0.5) 8 106.3 0.79 (20.1) 0.21 (5.3) 0.34 (8.6) 0.025 (0.6) 22 51.4
0.043 761M43356 0.99 (25.1) 0.19 (4.8) 0.31 (7.9) 0.020 (0.5) 8 96.8 0.79 (20.1) 0.22 (5.6) 0.35 (8.9) 0.025 (0.6) 28 46.7
0.047 761M47356 0.99 (25.1) 0.18 (4.6) 0.34 (8.6) 0.020 (0.5) 8 89.2 0.79 (20.1) 0.21 (5.3) 0.40 (10.2) 0.025 (0.6) 34 42.9
0.05 761M50356 0.99 (25.1) 0.19 (4.8) 0.34 (8.6) 0.020 (0.5) 11 84.1 0.79 (20.1) 0.22 (5.6) 0.41 (10.4) 0.025 (0.6) 37 40.4
0.056 761M56356 0.99 (25.1) 0.20 (5.1) 0.36 (9.1) 0.025 (0.6) 15 72.5 0.79 (20.1) 0.24 (6.1) 0.42 (10.7) 0.025 (0.6) 42 36.2
0.062 761M62356 0.99 (25.1) 0.20 (5.1) 0.39 (9.9) 0.025 (0.6) 18 65.7 0.79 (20.1) 0.25 (6.4) 0.44 (11.2) 0.025 (0.6) 67 32.8
0.068 761M68356 0.99 (25.1) 0.21 (5.3) 0.40 (10.2) 0.025 (0.6) 21 60.0 0.79 (20.1) 0.27 (6.9) 0.45 (11.4) 0.032 (0.8) 68 29.7
0.075 761M75356 0.99 (25.1) 0.23 (5.8) 0.41 (10.4) 0.025 (0.6) 24 54.5 0.79 (20.1) 0.28 (7.1) 0.47 (11.9) 0.032 (0.8) 70 27.0
0.082 761M82356 0.99 (25.1) 0.24 (6.1) 0.42 (10.7) 0.025 (0.6) 27 49.9 0.79 (20.1) 0.30 (7.6) 0.48 (12.2) 0.032 (0.8) 71 24.8
0.10 761M10456 0.99 (25.1) 0.27 (6.9) 0.45 (11.4) 0.032 (0.8) 44 40.8 0.79 (20.1) 0.34 (8.6) 0.52 (13.2) 0.032 (0.8) 73 20.5
0.12 761M12456 1.25 (31.8) 0.25 (6.4) 0.43 (10.9) 0.025 (0.6) 30 61.0 0.99 (25.1) 0.27 (6.9) 0.52 (13.2) 0.032 (0.8) 45 34.2
0.15 761M15456 1.25 (31.8) 0.26 (6.6) 0.50 (12.7) 0.032 (0.8) 32 48.8 0.99 (25.1) 0.31 (7.9) 0.56 (14.2) 0.032 (0.8) 47 27.6
0.18 761M18456 1.25 (31.8) 0.29 (7.4) 0.53 (13.5) 0.032 (0.8) 33 40.8 0.99 (25.1) 0.35 (8.9) 0.60 (15.2) 0.032 (0.8) 48 23.2
0.2 761M20456 1.25 (31.8) 0.30 (7.6) 0.55 (14.0) 0.032 (0.8) 34 36.8 0.99 (25.1) 0.37 (9.4) 0.62 (15.7) 0.032 (0.8) 49 21.0
0.22 761M22456 1.25 (31.8) 0.32 (8.1) 0.57 (14.5) 0.032 (0.8) 34 33.6 0.99 (25.1) 0.39 (9.9) 0.64 (16.3) 0.032 (0.8) 49 19.2
0.25 761M25456 1.74 (44.2) 0.27 (6.9) 0.51 (13.0) 0.032 (0.8) 20 71.2 1.25 (31.8) 0.33 (8.4) 0.64 (16.3) 0.032 (0.8) 35 29.7
0.27 761M27456 1.74 (44.2) 0.28 (7.1) 0.52 (13.2) 0.032 (0.8) 20 66.0 1.25 (31.8) 0.34 (8.6) 0.65 (16.5) 0.032 (0.8) 35 27.6
0.3 761M30456 1.74 (44.2) 0.30 (7.6) 0.54 (13.7) 0.032 (0.8) 21 59.5 1.25 (31.8) 0.37 (9.4) 0.68 (17.3) 0.032 (0.8) 35 25.0
0.33 761M33456 1.74 (44.2) 0.31 (7.9) 0.56 (14.2) 0.032 (0.8) 21 54.1 1.25 (31.8) 0.39 (9.9) 0.70 (17.8) 0.032 (0.8) 36 22.8
0.39 761M39456 1.74 (44.2) 0.35 (8.9) 0.59 (15.0) 0.032 (0.8) 21 46.0 1.25 (31.8) 0.43 (10.9) 0.74 (18.8) 0.032 (0.8) 36 19.5
0.43 761M43456 1.74 (44.2) 0.34 (8.6) 0.65 (16.5) 0.032 (0.8) 22 41.9 1.25 (31.8) 0.46 (11.7) 0.77 (19.6) 0.032 (0.8) 36 17.9
0.47 761M47456 1.74 (44.2) 0.36 (9.1) 0.67 (17.0) 0.032 (0.8) 22 38.4 1.25 (31.8) 0.48 (12.2) 0.79 (20.1) 0.032 (0.8) 36 16.5
0.5 761M50456 1.74 (44.2) 0.37 (9.4) 0.68 (17.3) 0.032 (0.8) 22 36.2 1.25 (31.8) 0.50 (12.7) 0.81 (20.6) 0.032 (0.8) 37 15.6
0.56 761M56456 1.74 (44.2) 0.40 (10.2) 0.71 (18.0) 0.032 (0.8) 22 32.5 1.25 (31.8) 0.54 (13.7) 0.84 (21.3) 0.032 (0.8) 37 14.1
0.6 761M60456 2.21 (56.1) 0.34 (8.6) 0.65 (16.5) 0.032 (0.8) 16 55.5 1.74 (44.2) 0.39 (9.9) 0.76 (19.3) 0.032 (0.8) 22 30.4
0.68 761M68456 2.21 (56.1) 0.37 (9.4) 0.68 (17.3) 0.032 (0.8) 16 49.1 1.74 (44.2) 0.42 (10.7) 0.80 (20.3) 0.032 (0.8) 22 27.0
0.75 761M75456 2.21 (56.1) 0.39 (9.9) 0.70 (17.8) 0.032 (0.8) 16 44.6 1.74 (44.2) 0.45 (11.4) 0.82 (20.8) 0.032 (0.8) 23 24.7
0.82 761M82456 2.21 (56.1) 0.41 (10.4) 0.72 (18.3) 0.032 (0.8) 16 40.9 1.74 (44.2) 0.48 (12.2) 0.85 (21.6) 0.032 (0.8) 23 22.7
0.9 761M90456 2.21 (56.1) 0.44 (11.2) 0.75 (19.1) 0.032 (0.8) 16 37.4 1.74 (44.2) 0.51 (13.0) 0.88 (22.4) 0.032 (0.8) 23 20.8
1.0 761M10556 2.21 (56.1) 0.44 (11.2) 0.81 (20.6) 0.032 (0.8) 16 33.9 1.74 (44.2) 0.54 (13.7) 0.91 (23.1) 0.032 (0.8) 23 18.9
1.2 761M12556 2.21 (56.1) 0.50 (12.7) 0.87 (22.1) 0.040 (1.0) 16 28.0 1.74 (44.2) 0.60 (15.2) 0.98 (24.9) 0.040 (1.0) 23 15.5
1.5 761M15556 2.21 (56.1) 0.57 (14.5) 0.94 (23.9) 0.040 (1.0) 17 22.6 1.74 (44.2) 0.69 (17.5) 1.06 (26.9) 0.040 (1.0) 23 12.7
1.8 761M18556 2.21 (56.1) 0.64 (16.3) 1.01 (25.7) 0.040 (1.0) 17 19.1 1.74 (44.2) 0.71 (18.0) 1.21 (30.7) 0.040 (1.0) 23 10.9
2.0 761M20556 2.21 (56.1) 0.68 (17.3) 1.05 (26.7) 0.040 (1.0) 17 17.3 1.74 (44.2) 0.76 (19.3) 1.26 (32.0) 0.040 (1.0) 23 9.9
2.2 761M22556 2.21 (56.1) 0.72 (18.3) 1.09 (27.7) 0.040 (1.0) 17 15.8 1.74 (44.2) 0.81 (20.6) 1.30 (33.0) 0.040 (1.0) 23 9.2
2.5 761M25556 2.21 (56.1) 0.77 (19.6) 1.15 (29.2) 0.040 (1.0) 17 14.1 1.74 (44.2) 0.88 (22.4) 1.37 (34.8) 0.040 (1.0) 23 8.3
2.7 761M27556 2.21 (56.1) 0.81 (20.6) 1.18 (30.0) 0.040 (1.0) 17 13.2 1.74 (44.2) 0.92 (23.4) 1.41 (35.8) 0.040 (1.0) 23 7.8
3.0 761M30556 2.21 (56.1) 0.86 (21.8) 1.23 (31.2) 0.040 (1.0) 17 12.0 1.74 (44.2) 0.98 (24.9) 1.47 (37.3) 0.040 (1.0) 24 7.2
3.3 761M33556 2.21 (56.1) 0.91 (23.1) 1.28 (32.5) 0.040 (1.0) 17 11.1 1.74 (44.2) 1.04 (26.4) 1.53 (38.9) 0.040 (1.0) 24 6.7
3.6 761M36556 2.21 (56.1) 0.96 (24.4) 1.33 (33.8) 0.040 (1.0) 17 10.3 1.74 (44.2) 1.09 (27.7) 1.59 (40.4) 0.040 (1.0) 24 6.3
3.9 761M39556 2.21 (56.1) 1.01 (25.7) 1.38 (35.1) 0.040 (1.0) 17 9.6 1.74 (44.2) 1.15 (29.2) 1.64 (41.7) 0.040 (1.0) 24 6.0
4.7 761M47556 2.21 (56.1) 1.12 (28.4) 1.49 (37.8) 0.040 (1.0) 17 8.3 1.74 (44.2) 1.28 (32.5) 1.77 (45.0) 0.040 (1.0) 24 5.3
5.0 761M50556 2.21 (56.1) 1.16 (29.5) 1.53 (38.9) 0.040 (1.0) 17 7.9
5.6 761M56556 2.21 (56.1) 1.24 (31.5) 1.61 (40.9) 0.040 (1.0) 17 7.3
6.0 761M60556 2.21 (56.1) 1.29 (32.8) 1.66 (42.2) 0.040 (1.0) 17 6.9
6.8 761M68556 2.21 (56.1) 1.38 (35.1) 1.75 (44.5) 0.040 (1.0) 17 6.4
7.0 761M70556 2.21 (56.1) 1.40 (35.6) 1.78 (45.2) 0.040 (1.0) 17 6.3
9
2
ESR ratings listed are Maximum. Please contact us for additional ESR data.
Type 761M
Metallized Polypropylene Film Capacitors
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
RMS Voltage vs. Frequency @ +85°C, in still air*
10
* For additional information regarding these performance curves and their interpretation please refer to our Thermal
Management application note on page 14. We also encourage you to contact us for additional application details.
Type 761M
Metallized Polypropylene Film Capacitors
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
RMS Voltage vs. Frequency @ +85°C, in still air*
11
* For additional information regarding these performance curves and their interpretation please refer to our Thermal
Management application note on page 14. We also encourage you to contact us for additional application details.
Type 761M
Metallized Polypropylene Film Capacitors
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
RMS Voltage vs. Frequency @ +85°C, in still air*
12
* For additional information regarding these performance curves and their interpretation please refer to our Thermal
Management application note on page 14. We also encourage you to contact us for additional application details.
Type 761M
Metallized Polypropylene Film Capacitors
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
RMS Voltage vs. Frequency @ +85°C, in still air*
13
* For additional information regarding these performance curves and their interpretation please refer to our Thermal
Management application note on page 14. We also encourage you to contact us for additional application details.
Type 761M
Metallized Polypropylene Film Capacitors
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Thermal Management Application Notes
14
This application note primarily addresses thermal issues as they relate to polypropylene film capacitors, however the same
concepts apply to other capacitor types as well. Because thermal environments vary considerably our approach is to provide
RMS voltage versus frequency performance curves (see pages 10-13) based on the following extreme parameters:
• +85°C ambient temperature.
• Pure convection cooling.
• All heat dissipation from the lead wire is added to the capacitor.
• Increased lead wire dissipation at high frequencies is included [skin effect losses].
• "Worst-case" capacitor material parameters are assumed.
The ambient temperature is the air temperature adjacent to the capacitor within the application enclosure at the
highest exterior temperature permitted by the end user. Since the maximum allowable temperature for polypropylene is
+105°C, our performance curves are based on a power level that raises the temperature +20°C from ambient to the hot spot.
Warning: Before comparing capacitor performance curves between suppliers
it is critical to ensure that they represent similar conditions!
We realize that the environment assumed by our performance curves is highly unlikely to represent that of a real application.
We also understand that a "pure convection" environment is also highly improbable. There will almost always be a circuit
board and other adjacent components that will impede convection based air circulation, and the capacitor under discussion
will not be the only “heat generating” device present! Because of all this "variability" our performance curves are calculated
very conservatively. Therefore you can always reliably specify a capacitor for your application if:
• The AC voltage across the capacitor is less than that indicated by our published curves.
• There are no adjacent "really hot" parts.
• The capacitor’s ambient environment is less than +85°C
• Air can circulate by means of some natural convection.
In MANY cases a capacitor can be operated reliably above the values shown in our performance curves since our
performance data is calculated under “worst-case/extreme” thermal conditions. The trick is to remove heat from the
capacitor by means other than convective air motion. Most of the following suggestions are relatively easy and inexpensive
to implement if considered early on in the design cycle.
• Reduce the ambient temperature (if possible).
• Separate hot(ter) components from the capacitor if electrical/mechanical environment permits.
(we understand loop inductance, creepage/clearance requirements, and mechanical "keep away's")
• Minimize the I2R heat added to the capacitor by the board etch or other connection methods.
• Size the pads around the capacitor vias as large as possible to remove heat from the leads. Add
as much extra copper around the capacitor pads as layout and design rules permit.
• Specify larger diameter copper capacitor leads (works even better when copper added at vias)
• Forced air helps, but there are some cautions. Case to hot spot rise is fixed by power level!
• Heat can be removed to a "heat sink", even if by hot glue to a cooler adjacent object or the board.
The application power level can be compared to the performance curves at a given frequency by the following calculation:
(Actual VAC/Rated VAC)2 = Power level relative to performance curve power
Temperature rise is directly related to power; power is related to the voltage squared.
A final thought. It may be tempting to obtain sample capacitors (from ANY supplier) and make temperature rise
measurements; making choices based on the results. The temperature rise measurements are certainly useful information
(and highly recommended for tough applications) but this method does not take into account the capacitor material parameter
variation over which we (and other capacitor suppliers) have no control.
Please contact us for more detailed information and methods to estimate allowable voltage in your electrical/thermal
environment. We always welcome an engineer-to-engineer discussion of your particular situation!
Type 761M
Metallized Polypropylene Film Capacitors
Type 761M
Metallized Polypropylene Film Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Current Rating Application Notes
15
Capacitor current ratings provided by many manufacturers need to be carefully evaluated as they can be misleading; not because
the information provided is incorrect, but because of the information that may NOT be provided. BOTH frequency and
temperature at which these ratings apply need to be factored into the "capacitor choice decision". The application’s electrical
and thermal parameters are rarely the same as the "environment" specified for the ratings provided. The "expected design life"
at the ratings provided is not necessarily the same for all capacitor types!
Some definitions:
Ripple current is the RMS value of the capacitor current in an application where the voltage across the capacitor is small (less
than ~5% of DC rating). For switching supplies the voltage change across the capacitor may be much less than this. RMS
capacitor current typically is not specified at a particular frequency and thus should be carefully considered. [The term "ripple"
originated with vacuum tube capacitor input power supplies, and may not have any meaning in the context of some modern
capacitor applications].
ESR (Effective Series Resistance) is a mathematical construct that “lumps” ALL of the capacitor losses together as an
appropriate resistance connected in series with the capacitor. It is a valid concept if the current is near sinusoidal OR the ESR is
essentially constant over the frequency spectrum of the current (fundamental and significant harmonics). In general ESR is
frequency, temperature, and (in some cases for ceramic capacitors) bias voltage dependent! For aluminum electrolytics
there is also an "aging" factor determined by run time, current, and temperature.
Although the ESR concept is truly valid only for power dissipation calculations at a specific frequency and temperature, ES
R
can be reasonably constant over some frequency and temperature range. ESR usually begins to rise above 100KHz., reducing
allowable capacitor current. For some capacitor types ESR rises with temperature. Be very careful not to envision a real
capacitor as "an ideal capacitor in series with a fixed resistor of ‘ESR’ ohms"! [Although good polypropylene capacitors
may behave nearly this way over a very wide frequency range]
In spite of the above qualifications, ESR remains a VERY useful construct to estimate dissipation with familiar formulas.
Current ratings based on ESR and temperature are easy performance metrics to "digest", but use them with care!
D.F.
ESR (ohms) = _______________
(2∗π∗f∗C∗100)
D.F. = Dissipation Factor expressed as a %
f = Frequency in Hertz
C = Capacitance in Farads
When choosing capacitors consider the enormous difference in expected lifetimes between film and electrolytics when used at
or near maximum "rated" current and/or temperature. Verify with a proposed supplier performance parameters at frequencies
above 100KHz if that applies.
Our suggested maximum ratings assume a lifetime longer than the useful life of the application. Electrolytic capacitor lifetimes
at performance extremes may be only a few thousand hours, and they remain one of the highest failure rate components in an
application, especially when carrying high frequency ripple current even at stress levels below their "max rating".
It is our opinion that our published voltage performance curves contain more information than do ripple current versus
temperature charts at fixed frequency. Maximum allowed current versus frequency can be estimated from our voltage curves for
polypropylene capacitors with +85°C convection environment.
It is a more difficult matter to specify RMS ripple currents for polyester capacitors where ESR is more frequency and
temperature dependent. Because of smaller size [for a given voltage and capacitance], and higher temperature ratings they
remain a viable solution for some high frequency ripple current applications.
Current versus temperature charts do not take into account ESR variation with frequency nor do they address possible
methods [other than "ambient" temperature] to optimize performance!
Please contact us for more information and for specific application notes. We have detailed methods to estimate
capacitor current limits for different capacitors and thermal/electrical environments. We always welcome an engineer-
to-engineer discussion of your specific application!
Type 761M
Metallized Polypropylene Film Capacitors
Additional Product Offerings
Metallized and Film/Foil Capacitors
Tel: 802-476-4146 • Fax: 802-476-4149
www.SBElectronics.com • Info@SBElectronics.com
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
Radial Lead Film Capacitors, Orange Drop
Series Capacitance DC Voltage AC Voltage Features
715P .001 to .47 µF 100 to 2000 70 to 500 Tolerance to ±1%, excellent Polystyrene sub.
716P .001 to 1.0 µF 100 to 2000 70 to 500 Solid copper leads, high performance
716P High Volt. .00022 to .033 µF 1000 to 2000 450 to 500 Compact size, extremely low D.F.
715P/717P .00047 to .015 µF 1800 to 2000 800 to 1000 dV/dt to 104 KV/µsec, tolerances to ±1%
773P .001 to .01 µF 1600 700 to 750 Ideal for demanding ballast applications
778P/779P .00047 to .033 µF 630 400 Peak current over 450 Amps, low ESR
725M .01 to 4.7 µF 160 to 630 100 to 250 Compact size, low ESR/ESL
727M .001 to 2.2 µF 400 to 2000 300 to 600 AC applications
757M .001 to .01 µF 1600 700 High AC voltage for electronic ballast
225P .001 to 1.0 µF 100 to 600 70 to 200 Over 40 years of proven reliability
418P .001 to 1.0 µF 100 to 1000 70 to 200 High peak current, temp rating to +125°C
425M .012 to 12.0 µF 100 to 630 63 to 250 Compact size, various lead spacings
427M .01 to 2.2 µF up to 1000 up to 480 AC applications
Series Cap/Resistor DC Voltage AC Voltage Features
288P .1/.22/.47 µF 400 250 Metallized Polyester Film Cap.
47/100/470 Ohm 1/2 watt carbon comp resistor
298P .047/.1 µF 500 330 Polyester Film/Foil Cap.
47/100/470 Ohm 1/2 watt carbon comp resistor
Axial Lead Film Capacitors
Series Capacitance DC Voltage AC Voltage Features
760M/761M .01 to 65.0 µF 160 to 630 100 to 250 High Power
762M/763M .01 to 2.2 µF up to 2000 up to 600 AC applications
770P .00047 to .68 µF 100 to 600 70 to 200 Excellent capacitance stability
460M/461M .0047 to 100.0 µF 63 to 1000 40 to 250 Various sizes, wide range of cap values
462M/463M .01 to 2.2 µF up to 1000 up to 480 AC applications
192P Pacer.0001 to .39 µF 80 to 600 55 to 200 Small size, available on Tape & Reel
Orange Drop and Pacer are registered trademarks of SB Electronics, Inc.
SBE designs and manufactures a wide variety of
Film Capacitors. Please contact us today for additional details!
POLYPROPYLENE – FILM/FOIL
POLYESTER – FILM/FOIL
POLYESTER – FILM/FOIL
POLYESTER – METALLIZED
POLYESTER – METALLIZED
POLYPROPYLENE – METALLIZED
POLYPROPYLENE – METALLIZED
POLYPROPYLENE – FILM/FOIL
R-C NETWORKS
16
A
dditional Product Offerin
g
s
Metallized and Film/Foil Capacitors
