133133
TCR
Type
D
Case
Size
See table
above
476
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
M = ±20%
016
Rated
DC Voltage
004 = 4Vdc
006 = 6.3Vdc
010 = 10Vdc
016 = 16Vdc
020 = 20Vdc
025 = 25Vdc
035 = 35Vdc
050 = 50Vdc
HOW TO ORDER
#
Packaging
R = Pure Tin 7" Reel
S = Pure Tin 13" Reel
H = Tin Lead 7“Reel
(contact manufacturer)
K = Tin Lead 13” Reel
(contact manufacturer)
TCR Series
Professional Conductive Polymer Chip Capacitors
CASE DIMENSIONS: millimeters (inches)
Code EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012) S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
B1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
D2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
T1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max. 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
Y2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1 dimension applies to the termination width for A dimensional area only.
0070
ESR in m
FEATURES
• Conductive polymer electrode
• Benign failure mode under recommended use conditions
• Robust design for long operation lifetime
• AVX maverick part control Q-process with statistical
screening
• Improved basic reliability 0.5%/1000hrs
• Humidity 85°C/85%RH, Vr, (up to 500 or 1000 hours see reference table)
• -55 to +125°C operation temperature
• DCL 0.1 CxV, 0.05CV on selected codes
• 3x reflow 260°C compatible
• Low ESR
APPLICATIONS
• Long life time DC/DC converter applications in Telecommunications,
Industrial, Avionics
B, D, T, Y CASE
XXXXX
686 A
AVX LOGO
Polymer Capacitance Value in pF
686 = 68μF
Rated Voltage
A = 10V
ID Code
Polarity
Band
(Anode+)
MARKING
*Codes under development
J
DCL
J = 0.1CV
Technical Data: All technical data relate to an ambient temperature of +25ºC
Capacitance Range: 10μF to 220μF
Capacitance Tolerance: ±20%
Leakage Current DCL: (J) 0.1CV
Temperature Range: -55ºC to +125°C
Basic Reliability: 0.5% per 1000 hours at 85ºC, Vr with 0.1ΩV series impedance, 60% confidence level
Termination Finish: Sn Plating (standard) and SnPb Plating upon request
TECHNICAL SPECIFICATIONS
For additional information on Q-process please consult the AVX technical
publication “Reaching the Highest Reliability for Tantalum Capacitors”
(see the link: http://www.avx.com/docs/techinfo/Qprocess.pdf)
112516
NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at
their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes
may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty
cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associ-
ated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer Capacitor Guidelines for
more information or contact factory for application assistance.
LEAD-FREE COMPATIBLE
COMPONENT
SnPb termination option is not
RoHS compliant.
134 112516
Capacitance Rated Voltage DC (V
R
)
F Code 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
10 106 D(70 D(120)
15 156 D(70)
22 226 B(70) D(70)
33 336 B(70) T(70)* D(70)
47 476 B(70) D(70)
68 686 D(70)
100 107 D(70)
150 157 D(40)
220 227 D(40), Y(40)
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
Available Ratings, (ESR ratings in mOhms in brackets)
Engineering samples - please contact manufacturer
*Codes under development – subject to change
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same case size, to the same reliability standards.
RATINGS & PART NUMBER REFERENCE
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at
rated voltage after 5 minutes.
ESR allowed to move up to 1.25 times catalog limit post mounting.
For typical weight and composition see page 223.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
Rated Maximum DCL DF ESR 100kHz RMS Current (mA) Humidity
AVX Part No. Case Capacitance Voltage Operating Max. Max. Max MSL 85°C/85%RH, Vr
Size (µF) (V) Temperature (µA) (%) @ 100kHz 45ºC 85ºC 105ºC 125ºC (hrs)
(ºC) (m)
4 Volt
TCRD227M004#0040J D 220 4 125 88 6 40 3 2400 1700 1100 600 1000
TCRY227M004#0040J Y 220 4 125 88 6 40 3 2200 1500 1000 600 500
6.3 Volt
TCRB226M006#0070J B 22 6.3 125 13 6 70 3 1300 900 600 300 500
TCRB336M006#0070J B 33 6.3 125 19 6 70 3 1300 900 600 300 500
TCRB476M006#0070J B 47 6.3 125 28 6 70 3 1300 900 600 300 500
TCRD157M006#0040J D 150 6.3 125 90 6 40 3 2400 1700 1100 600 1000
10 Volt
TCRD686M010#0070J D 68 10 125 68 6 70 3 1800 1300 800 500 1000
TCRD107M010#0070J D 100 10 125 100 6 70 3 1800 1300 800 500 1000
16 Volt
TCRD336M016#0070J D 33 16 125 52 6 70 3 1800 1300 800 500 1000
TCRD476M016#0070J D 47 16 125 75 6 70 3 1800 1300 800 500 1000
20 Volt
TCRD226M020#0070J D 22 20 125 44 8 70 3 1800 1300 800 500 1000
25 Volt
TCRD156M025#0070J D 15 25 125 37 8 70 3 1800 1300 800 500 1000
35 Volt
TCRD106M035#0070J D 10 35 125 35 8 70 3 1800 1300 800 500 1000
50 Volt
TCRD106M050#0120J D 10 50 125 50 10 120 3 1400 1000 600 400 500
TCR Series
Professional Conductive Polymer Chip Capacitors
135135
112516
TCR Series
Professional Conductive Polymer Chip Capacitors
TEST TCR series (Temperature range -55ºC to +125ºC)
Condition Characteristics
Visual examination no visible damage
DCL 2 x initial limit
ΔC/C within +20/-30% of initial value
DF 2 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 2 x initial limit
125ºC, 0V, 2000h ΔC/C within ±20% of initial value
DF 2 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 3 x initial limit
ΔC/C within +30/-20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
+20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
DCL
IL* n/a IL* 10 x IL* 12.5 x IL* IL*
ΔC/C
n/a ±20% ±5% ±20% ±30% ±5%
DF
IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL*
Visual examination no visible damage
DCL initial limit
ΔC/C within +20/-30% of initial value
DF 1.25 x initial limit
ESR 1.25 x initial limit
Visual examination no visible damage
DCL initial limit
ΔC/C within ±10% of initial value
DF initial limit
ESR 1.25 x initial limit
Determine after application of rated voltage for 2000
+48/-0 hours at 105±2ºC. Also determine after appli-
cation of 125ºC temperature, 2/3 rated voltage for
2000 +48/-0 hours. After test leaving 1-2 hours at
room temperature. Power supply impedance to be
≤0.1Ω/V.
Determine after leaving for 500 or 1000 hours at
85±2ºC, 85% relative humidity and rated voltage
and then recovery 1-2 hours at room temperature.
MIL-STD-202, Method 213, Condition I,
100 G peak
MIL-STD-202, Method 204, Condition D,
10 Hz to 2,000 Hz, 20 G peak
Test temperature: 125ºC+3/0ºC
Surge voltage: 1.3 x 2/3 rated voltage
Charge/Discharge resistance: 1000±100Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration(min)
1 +20±2 15
2 -55+0/-3 15
3 +20±2 15
4 +85+3/-0 15
5 +125+3/-0 15
6 +20±2 15
*Initial Limit
For use outside of recommended conditions and special request, please contact manufacturer.
Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.
QUALIFICATION TABLE
Mechanical
Shock/Vibration
Surge
Voltage
Temperature
Stability
Biased
Humidity
Storage Life
Endurance
RECOMMENDED DERATING FACTOR
Voltage and temperature
derating as percentage of Vr.
For Vr ≤ 10V For Vr ≥ 16V
Recommended
Application Voltage
100%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
-55% 85ºC 105ºC 125ºC
67%
60%
Recommended
Application Voltage
Rated VoltageRated Voltage
100%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
-55% 85ºC 105ºC 125ºC
67%
54%
Rated Operating Temperature
voltage ≤85°C 105°C 125°C
≤10V 90% 90% 60%
≥16V 80% 80% 54%
