Light Touch Switches/EVQPL/3PL/5PL/PT 4.9 mm Square SMD Light Touch Switches Type: EVQPL/EVQ3PL EVQ5PL/EVQPT Features External dimensions : 4.9 mmx 4.9 mm, Height: 0.8 mm(Without push plate), 1.5 mm(With push plate) Recommended Applications Operation switches for portable electronic equipment (Notebook PC, Camcorders, Portable audio players, etc.) Operation switches for car audio systems Explanation of Part Numbers 1 2 3 Product Code 4 5 6 8 7 TypeOperating Force 9 Product Height Specifications Type Snap action/Push-on type SPST Rating 10 A 2 V DC to 20 mA 15 V DC (Resistive load) Contact Resistance 50 m max. Insulation Resistance Electrical 50 M min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC for 1 minute 3 ms max. (ON) 8 ms max. (OFF) Bouncing 1.0 N0.5 N 1.6 N0.5 N Operating Force Mechanical Travel Endurance Operating Life 2.6 N0.6 N 3.5 N1.0 N 0.25 mm +0.10 -0.20 mm 500,000 cycles min. 200,000 cycles min. -20 C to +70 C Operating Temperature -40 C to +85 C (Bulk) -20 C to +60 C (Taping) Storage Temperature Minimum Quantity/Packing Unit 5,000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 25,000 pcs. Note: Non washable Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. LQGXVWULDOSDQDVRQLFFRPDFH 1 (c) Panasonic Corporation 2019 ANCTB121E 201903-Fd Light Touch Switches/EVQPL/3PL/5PL/PT Dimensions in mm (not to scale) Be careful not to scratch the film B 2 3. 0.2 4.9 4.6 Surface mount For reflow soldering Without push plate A' B' 1.2 3.7 4.6 4.9 Operating part 0.4 0.8 (5.5) (4.6) 4.3 3.1 A (1) GND B 3.4 5.4 (Embossed Taping) A 0.3 EVQPLF EVQPLK EVQ5PL General dimension tolerance : 0.2 ( )dimensions are reference dimensions. 0.45 0.05 2.5 5.00.5 No. 1 A' PWB land pattern for reference Height 0.8 mm 0.8 mm 0.8 mm B 4 2. Operating part Operating Life 500,000 cycles 200,000 cycles 200,000 cycles General dimension tolerance : 0.2 ( )dimensions are reference dimensions. 0.45 0.05 (Embossed Taping) A' B' 4. 0.4 0.8 1.2 1.5 +- 0.2 0.1 4 (5.5) (4.6) 4.3 3.1 A (1) GND 1.2 3.7 4.6 4.9 B 3.4 5.4 Surface mount For reflow soldering With push plate 2.5 50.5 0.2 (3.4) (3.8) 0.3 A 2.2 4 EVQPLD/PT5 EVQPLH/PT9 EVQPLM EVQ3PL Operating Force 1.6 N 2.6 N 3.5 N 4.9 4.6 Part Numbers EVQPLFA08 EVQPLKA08 EVQ5PLA08 No. 2 B' Circuit diagram A' PWB land pattern for reference Part Numbers EVQPLDA15/PT5A15 EVQPLHA15/PT9A15 EVQPLMA15 EVQ3PLA15 Operating Force 1.0 N 1.6 N 2.6 N 3.5 N B' Circuit diagram Height 1.5 mm 1.5 mm 1.5 mm 1.5 mm Operating Life 500,000/2,000,000 cycles 500,000/2,000,000 cycles 200,000 cycles 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 2 (c) Panasonic Corporation 2019 ANCTB121E 201903-Fd Light Touch Switches/EVQPL/3PL/5PL/PT Recommended Reflow Soldering Conditions Operation Top (C) MAX. 260 Fan or Normal Temp. 230 180 150 (Normal Temp.) 9030 4010 Soldering Time (s) Embossed Carrier Taping Tape width=12.0 mm t1 Feeding hole P 2 P0 E D0 Chip pocket B t2 Chip component Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1.0N at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. F W A P1 Tape running direction Unit: mm Part No. EVQPL EVQ3PL EVQ5PL EVQPT Height A B W 0.8/1.5 5.00.2 5.00.2 12.00.3 F E P1 5.50.1 1.750.10 8.00.1 Recommended Shape of Test Pole P2 P0 D0 Dia. 2.00.1 4.00.1 1.5 -0 +0.1 t1 t2 0.350.1 1.0/1.70.2 Recommended Operating Conditions for Reflow soldering type 0.3 mm max. Test pole 1.0 Leaning angle range 90 4 (vertical direction) Switch Mounting surface R0.20.05 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 3 (c) Panasonic Corporation 2019 ANCTB121E 201903-Fd Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ (c)Panasonic Corporation 2019 ANCTB121E-2 201903-Fd Specifications are subject to change without notice.