Document 232 DW3316 Coupled Inductors for xDSL * Coupled inductor optimized for xDSL filtering applications * Can be used as a common mode choke, 1:1 transformer or in SEPIC applications Core material Ferrite Terminations RoHS compliant gold over nickel over phos bronze. Other terminations available at additional cost. Weight 1.13 - 1.34 g Ambient temperature -40C to +85C Storage temperature Component: -40C to +85C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750 per 13 reel Plastic tape: 24 mm wide, 0.36 mm thick, 16 mm pocket spacing, 5.5 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Inductance2 DCR 20% max Part number1 (mH) (Ohms) DW3316-155ML_ 1.5 10.8 DW3316-275ML_ 2.7 18.0 DW3316-335ML_ 3.3 20.0 DW3316-395ML_ 3.9 23.0 DW3316-475ML_ 4.7 26.0 DW3316-685ML_ 6.8 42.0 Color dot 2 -123 1 SRF3 typ (MHz) 1.70 1.25 1.10 0.968 0.850 0.690 1. When ordering, please specify termination and packaging codes: Isat4 (mA) 300 230 180 160 160 150 1 4 2 3 4 0.100 0.290 0.400 max 2,54 7,37 10,16 3 Schematic DW3316-685MLD Termination: L = Gold over nickel over phos bronze terminations Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. 2. Inductance is per winding, tested at 10 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. SRF is measured using an Agilent/HP 8753D network analyzer. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 0.515 max 13,08 0.395 10,03 0.330 dia 8,38 0.185 4,70 0.200 max 5,08 0.100 2,54 0.490 12,45 Dimensions are in 0.115 2,92 0.110 2,79 Recommended Land Pattern inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 232 Revised 10/14/08 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.