SP100 Series 100W, 90-264Vac Input, Open-frame Switching Mode Power Supply Features * * * * * * * * Single output to 100W Input voltage range: 90-264V Output current(0-8330mA) 2"x 4" form factor High variety of output voltages from 12Vdc-56Vdc Efficiency to 85% Protections: OVP, SCP, Brown-out, and overload UL, cUL, CE, FCC certifications *Product images are for illustrative purposes only and may vary from actual design. Applications * Network system, telecommunication system, storage system, industrial equipment, and printers Model List*(See part number scheme for model number details) Model Number Input Voltage Output Power Output Voltage Output Current Min. Output Current Max. Efficiency Ripple & Noise (mVp-p) SP100-1121 90-264Vac 100W 12V 0 8.33A 85% 200 SP100-1151 90-264Vac 100W 15V 0 6.66A 85% 200 SP100-1191 90-264Vac 100W 19V 0 5.26A 85% 200 SP100-1241 90-264Vac 100W 24V 0 4.16A 85% 240 SP100-1361 90-264Vac 100W 36V 0 2.8A 85% 360 SP100-1481 90-264Vac 100W 48V 0 2.08A 85% 480 SP100-1561 90-264Vac 100W 56V 0 1.79A 85% 560 Certificates UL/cUL/CB -/CE/FCC -/-/-/CE/FCC UL/cUL/CB -/CE/FCC UL/cUL/CB -/CE/FCC UL/cUL/CB -/CE/FCC UL/cUL/CB -/CE/FCC -/-/-/CE/FCC Notes: 1. Load regulation is tested at 10% to 100% of the rated load. 2. Peak-to-peak for all models, convection rating @115Vac MIN.; Measurements with a 20MHz bandwidth and terminated with a 22uF electrolytic Cap. In parallel with a 0.1uF ceramic Cap. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 1/3 SP100 Series 100W, 90-264Vac Input, Open-frame Switching Mode Power Supply Technical Data Input Voltage Frequency Input Current Inrush Current Load Regulation Line Regulation Turn-on Time Hold-up Time Safety Ground Leakage Current Brown-out Protection Over Voltage Protection Over Load Protection Short circuit protection Operating Temperature Storage Temperature Storage Humidity 90 - 264Vac 50/60 Hz @115Vac 1.5A rms ; @230Vac 0.7A rms Cold Start@ 115Vac, at25 < 40 Ap-p Cold Start@ 230Vac, at25 < 80 Ap-p 5% 1% <3 Sec (Full Load @115Vac) > 16mSec (Full Load @115Vac) <3.5mA (Class I Type@230Vac 50Hz) Auto-Recovery Latch off (145%25%) Hiccup/Auto-Recovery Hiccup/Auto-Recovery 0-50 -40-85 5%-95% RH Safety and EMC Approval (some models) (some models) (some models) UL 60950-1 cUL 60950-1 CB Report(IEC60950-1) TUV EN 60950-1 CE FCC Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 2/3 SP100 Series 100W, 90-264Vac Input, Open-frame Switching Mode Power Supply Mechanical Diagram Dimensions: 2"x4"x1.12" (W x L x H inch Connector Types & PIN Assignments Connector Connector Type CON 1 (INPUT) Molex 09-65-2038 or Equivalent parts Mating Type=Molex 09-52-4034 or Equivalent CON2 (OUTPUT) Molex 09-65-2048 or Equivalent parts Mating Type= Molex 09-68-2048 or Equivalent PIN Number Signal PIN 1 PIN 2 PIN 3 PIN 3~4 PIN 1~2 LINE NC NEUTRAL V+ RETURN Part Number Scheme SP 100-1 XX 1 SP=Open-frame series 1=Single output 100=Output power Watts XX=Rated Voltage Ex.) 12=1V 56=56V 1=Single Input *Product images are for illustrative purposes only and may vary from actual design. *Specifications are subject to change without notice. Autec is not responsible for issues arising from errors or omissions. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 3/3