74HC245PW,112 - NEXPERIA

74HC245; 74HCT245

Octal bus transceiver; 3-state

Rev. 5 — 14 July 2020 Product data sheet

1. General description

The 74HC245; 74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an

output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs

to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of

current limiting resistors to interface inputs to voltages in excess of VCC.

2. Features and benefits

•Complies with JEDEC standard JESD7A

•Input levels:

•For 74HC245: CMOS level

•For 74HCT245: TTL level

•Octal bidirectional bus interface

•Non-inverting 3-state outputs

•ESD protection:

••HBM JESD22-A114F exceeds 2000 V

•MM JESD22-A115-A exceeds 200 V

•Multiple package options

•Specified from -40 °C to +85 °C and from -40 °C to +125 °C

3. Ordering information

Table 1. Ordering information

PackageType number

Temperature range Name Description Version

74HC245D

74HCT245D

-40 °C to +125 °C SO20 plastic small outline package; 20 leads;

body width 7.5 mm

SOT163-1

74HC245DB

74HCT245DB

-40 °C to +125 °C SSOP20 plastic shrink small outline package; 20 leads;

body width 5.3 mm

SOT339-1

74HC245PW

74HCT245PW

-40 °C to +125 °C TSSOP20 plastic thin shrink small outline package;

20 leads; body width 4.4 mm

SOT360-1

74HC245BQ

74HCT245BQ

-40 °C to +125 °C DHVQFN20 plastic dual in-line compatible thermal

enhanced very thin quad flat package; no leads;

20 terminals; body 2.5 × 4.5 × 0.85 mm

SOT764-1

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

4. Functional diagram

1DIR

mna174

Fig. 1. Logic symbol

173

119

3EN1

3EN2

mna175

Fig. 2. IEC logic symbol

Product data sheet Rev. 5 — 14 July 2020 2 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

5. Pinning information

5.1. Pinning

74HC245

74HCT245

DIR VCC

A0 OE

A1 B0

A2 B1

A3 B2

A4 B3

A5 B4

A6 B5

A7 B6

GND B7

001aac431

Fig. 3. Pin configuration SOT163-1 (SO20),

SOT339-1 (SSOP20) and SOT360-1 (TSSOP20)

001aac432

74HC245

74HCT245

GND(1)

Transparent top view

A5 B4

A4 B3

A3 B2

A2 B1

A1 B0

A0 OE

GND

9 12

8 13

7 14

6 15

5 16

4 17

3 18

2 19

terminal 1

index area

(1) This is not a ground pin. There is no electrical or

mechanical requirement to solder the pad. In case

soldered, the solder land should remain floating or

connected to GND.

Fig. 4. Pin configuration SOT764-1 (DHVQFN20)

5.2. Pin description

Table 2. Pin description

Symbol Pin Description

DIR 1 direction control

A0, A1, A2, A3, A4, A5, A6, A7 2, 3, 4, 5, 6, 7, 8, 9 data input/output

GND 10 ground (0 V)

B7, B6, B5, B4, B3, B2, B1, B0 11, 12, 13, 14, 15, 16, 17, 18 data input/output

OE 19 output enable input (active LOW)

VCC 20 supply voltage

6. Functional description

Table 3. Function table

H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state.

Input Input/output

OE DIR An Bn

L L A = B input

L H input B = A

H X Z Z

Product data sheet Rev. 5 — 14 July 2020 3 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

7. Limiting values

Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions Min Max Unit

VCC supply voltage -0.5 +7 V

IIK input clamping current VI < -0.5 V or VI > VCC + 0.5 V - ±20 mA

IOK output clamping current VO < -0.5 V or VO > VCC + 0.5 V - ±20 mA

IOoutput current -0.5 V < VO < VCC + 0.5 V - ±35 mA

ICC supply current - 70 mA

IGND ground current -70 - mA

Tstg storage temperature -65 +150 °C

Ptot total power dissipation [1] - 500 mW

[1] For SOT163-1 (SO20) package: Ptot derates linearly with 12.3 mW/K above 109 °C.

For SOT339-1 (SSOP20) package: Ptot derates linearly with 10.0 mW/K above 100 °C.

For SOT360-1 (TSSOP20) package: Ptot derates linearly with 10.0 mW/K above 100 °C.

For SOT764-1 (DHVQFN20) package: Ptot derates linearly with 12.9 mW/K above 111 °C.

8. Recommended operating conditions

Table 5. Recommended operating conditions

74HC245 74HCT245Symbol Parameter Conditions

Min Typ Max Min Typ Max

Unit

VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V

VIinput voltage 0 - VCC 0 - VCC V

VOoutput voltage 0 - VCC 0 - VCC V

VCC = 2.0 V - - 625 - - - ns/V

VCC = 4.5 V - 1.67 139 - 1.67 139 ns/V

Δt/ΔV input transition rise and

fall rate

VCC = 6.0 V - - 83 - - - ns/V

Tamb ambient temperature -40 +25 +125 -40 +25 +125 °C

Product data sheet Rev. 5 — 14 July 2020 4 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

9. Static characteristics

Table 6. Static characteristics

At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

25 °C -40 °C to +85 °C -40 °C to +125 °CSymbol Parameter Conditions

Min Typ Max Min Max Min Max

Unit

74HC245

VCC = 2.0 V 1.5 1.2 - 1.5 - 1.5 - V

VCC = 4.5 V 3.15 2.4 - 3.15 - 3.15 - V

VIH HIGH-level

input voltage

VCC = 6.0 V 4.2 3.2 - 4.2 - 4.2 - V

VCC = 2.0 V - 0.8 0.5 - 0.5 - 0.5 V

VCC = 4.5 V - 2.1 1.35 - 1.35 - 1.35 V

VIL LOW-level

input voltage

VCC = 6.0 V - 2.8 1.8 - 1.8 - 1.8 V

VI = VIH or VIL

IO = -20 μA; VCC = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V

IO = -20 μA; VCC = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V

IO = -20 μA; VCC = 6.0 V 5.9 6.0 - 5.9 - 5.9 - V

IO = -6.0 mA; VCC = 4.5 V 3.98 4.32 - 3.84 - 3.7 - V

VOH HIGH-level

output voltage

IO = -7.8 mA; VCC = 6.0 V 5.48 5.81 - 5.34 - 5.2 - V

VI = VIH or VIL

IO = 20 μA; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V

IO = 20 μA; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V

IO = 20 μA; VCC = 6.0 V - 0 0.1 - 0.1 - 0.1 V

IO = 6.0 mA; VCC = 4.5 V - 0.15 0.26 - 0.33 - 0.4 V

VOL LOW-level

output voltage

IO = 7.8 mA; VCC = 6.0 V - 0.16 0.26 - 0.33 - 0.4 V

IIinput leakage

current

VI = VCC or GND; VCC = 6.0 V - - ±0.1 - ±1.0 - ±1.0 μA

IOZ OFF-state

output current

VI = VIH or VIL; VCC = 6.0 V;

VO = VCC or GND

- - ±0.5 - ±5.0 - ±10 μA

ICC supply current VI = VCC or GND; IO = 0 A;

VCC = 6.0 V

- - 8.0 - 80 - 160 μA

CIinput

capacitance

- 3.5 - - - - - pF

CI/O input/output

capacitance

- 10 - - - - - pF

Product data sheet Rev. 5 — 14 July 2020 5 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

25 °C -40 °C to +85 °C -40 °C to +125 °CSymbol Parameter Conditions

Min Typ Max Min Max Min Max

Unit

74HCT245

VIH HIGH-level

input voltage

VCC = 4.5 V to 5.5 V 2.0 1.6 - 2.0 - 2.0 - V

VIL LOW-level

input voltage

VCC = 4.5 V to 5.5 V - 1.2 0.8 - 0.8 - 0.8 V

VI = VIH or VIL; VCC = 4.5 V

IO = -20 μA 4.4 4.5 - 4.4 - 4.4 - V

VOH HIGH-level

output voltage

IO = -6 mA 3.98 4.32 - 3.84 - 3.7 - V

VI = VIH or VIL; VCC = 4.5 V

IO = 20 μA - 0 0.1 - 0.1 - 0.1 V

VOL LOW-level

output voltage

IO = 6.0 mA - 0.15 0.26 - 0.33 - 0.4 V

IIinput leakage

current

VI = VCC or GND; VCC = 5.5 V - - ±0.1 - ±1.0 - ±1.0 μA

IOZ OFF-state

output current

VI = VIH or VIL; VCC = 5.5 V;

VO = VCC or GND

- - ±0.5 - ±5.0 - ±10 μA

ICC supply current VI = VCC or GND;

VCC = 5.5 V; IO = 0 A

- - 8.0 - 80 - 160 μA

VI = VCC - 2.1 V; other

inputs at VCC or GND;

VCC = 4.5 V to 5.5 V; IO = 0 A

An or Bn inputs - 40 144 - 180 - 196 μA

OE input - 150 540 - 675 - 735 μA

ΔICC additional

supply current

DIR input - 90 324 - 405 - 441 μA

CIinput

capacitance

- 3.5 - - - - - pF

CI/O input/output

capacitance

- 10 - - - - - pF

Product data sheet Rev. 5 — 14 July 2020 6 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

10. Dynamic characteristics

Table 7. Dynamic characteristics

GND = 0 V; for test circuit see Fig. 7.

25 °C -40 °C to +125 °CSymbol Parameter Conditions

Min Typ Max Max

(85 °C)

Max

(125 °C)

Unit

74HC245

An to Bn or Bn to An; see Fig. 5 [1]

VCC = 2.0 V - 25 90 115 135 ns

VCC = 4.5 V - 9 18 23 27 ns

VCC = 5.0 V; CL = 15 pF - 7 - - - ns

tpd propagation delay

VCC = 6.0 V - 7 15 20 23 ns

OE to An or Bn; see Fig. 6 [2]

VCC = 2.0 V - 30 150 190 225 ns

VCC = 4.5 V - 11 30 38 45 ns

ten enable time

VCC = 6.0 V - 9 26 33 38 ns

OE to An or Bn; see Fig. 6 [3]

VCC = 2.0 V - 41 150 190 225 ns

VCC = 4.5 V - 15 30 38 45 ns

tdis disable time

VCC = 6.0 V - 12 26 33 38 ns

see Fig. 5 [4]

VCC = 2.0 V - 14 60 75 90 ns

VCC = 4.5 V - 5 12 15 18 ns

tttransition time

VCC = 6.0 V - 4 10 13 15 ns

CPD power dissipation

capacitance

per transceiver; VI = GND to VCC [5] - 30 - - - pF

74HCT245

An to Bn or Bn to An; see Fig. 5 [1]

VCC = 4.5 V - 12 22 28 33 ns

tpd propagation delay

VCC = 5.0 V; CL = 15 pF - 10 - - - ns

ten enable time OE to An or Bn; see Fig. 6 [2] - 16 30 38 45 ns

tdis disable time OE to An or Bn; see Fig. 6 [3] - 16 30 38 45 ns

tttransition time VCC = 4.5 V; see Fig. 5 [4] - 5 12 15 18 ns

CPD power dissipation

capacitance

per transceiver;

VI = GND to VCC - 1.5 V

[5] - 30 - - - pF

[1] tpd is the same as tPHL and tPLH.

[2] ten is the same as tPZH and tPZL.

[3] tdis is the same as tPHZ and tPLZ.

[4] tt is the same as tTHL and tTLH.

[5] CPD is used to determine the dynamic power dissipation (PD in μW):

PD = CPD x VCC 2 x fi x N + ∑(CL x VCC 2 x fo) where:

fi = input frequency in MHz;

fo = output frequency in MHz;

CL = output load capacitance in pF;

VCC = supply voltage in V;

N = number of inputs switching;

∑(CL x VCC 2 x fo) = sum of outputs.

Product data sheet Rev. 5 — 14 July 2020 7 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

10.1. Waveforms and test circuit

001aac433

tPLH

tPHL

90 %

10 %

VMVM

Bn, An output

An, Bn input

GND

VOH

VOL

tTLH

tTHL

Measurement points are given in Table 8.

VOL and VOH are typical output voltage levels that occur with the output load.

Fig. 5. Input (An, Bn) to output (Bn, An) propagation delays and output transition times

001aac479

tPLZ

tPHZ

outputs

disabled

outputs

enabled

90 %

10 %

outputs

enabled

OE input

VCC

VOL

VOH

GND

tPZL

tPZH

output

LOW-to-OFF

OFF-to-LOW

output

HIGH-to-OFF

OFF-to-HIGH

trtf

90 %

10 %

Measurement points are given in Table 8.

VOL and VOH are typical output voltage levels that occur with the output load.

Fig. 6. 3-state output enable and disable times

Table 8. Measurement points

Input OutputType

VMVM

74HC245 0.5VCC 0.5VCC

74HCT245 1.3 V 1.3 V

Product data sheet Rev. 5 — 14 July 2020 8 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

VMVM

10 %

90 %

0 V

negative

pulse

positive

pulse

0 V

VMVM

90 %

10 %

001aad983

DUT

VCC VCC

VIVO

RLS1

open

Test data is given in Table 9.

Definitions test circuit:

RT = Termination resistance should be equal to output impedance Zo of the pulse generator.

CL = Load capacitance including jig and probe capacitance.

RL = Load resistance.

S1 = Test selection switch.

Fig. 7. Test circuit for measuring switching times

Table 9. Test data

Input Load S1 positionType

VItr, tfCLRLtPHL, tPLH tPZH, tPHZ tPZL, tPLZ

74HC245 VCC 6 ns 15 pF, 50 pF 1 kΩ open GND VCC

74HCT245 3 V 6 ns 15 pF, 50 pF 1 kΩ open GND VCC

Product data sheet Rev. 5 — 14 July 2020 9 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

11. Package outline

UNIT A

max. A

1 A

2 A

3 b

p c D

(1) E

(1) (1)

e H

E L L

p Q Z

y w v θ

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

inches

2.65 0.3

0.1

2.45

2.25

0.49

0.36

0.32

0.23

13.0

12.6

7.6

7.4 1.27 10.65

10.00

1.1

1.0

0.9

0.4 8

0.25 0.1

DIMENSIONS (inch dimensions are derived from the original mm dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.

1.1

0.4

SOT163-1

w M

detail X

0.25

075E04 MS-013

pin 1 index

0.1 0.012

0.004

0.096

0.089

0.019

0.014

0.013

0.009

0.51

0.49

0.30

0.29 0.05

1.4

0.055

0.419

0.394

0.043

0.039

0.035

0.016

0.01

0.25

0.01 0.004

0.043

0.016

0.01

0 5 10 mm

scale

v M A

(A )

SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1

99-12-27

03-02-19

Fig. 8. Package outline SOT163-1 (SO20)

Product data sheet Rev. 5 — 14 July 2020 10 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

UNIT A

1 A

2 A

3 b

p c D

(1) E

(1) e H

E L L

p Q (1)

Z y w v θ

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.21

0.05

1.80

1.65

0.38

0.25

0.20

0.09

7.4

7.0

5.4

5.2 0.65 7.9

7.6

0.9

0.7

0.9

0.5

0.13 1.25 0.2 0.1

DIMENSIONS (mm are the original dimensions)

Note

1. Plastic or metal protrusions of 0.2 mm maximum per side are not included.

1.03

0.63

SOT339-1 MO-150 99-12-27

03-02-19

w M

detail X

v M A

(A )

1 10

20 11

0.25

pin 1 index

0 2.5 5 mm

scale

SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm SOT339-1

max.

Fig. 9. Package outline SOT339-1 (SSOP20)

Product data sheet Rev. 5 — 14 July 2020 11 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

UNIT A

1 A

2 A

3 b

p c D

(1) E (2) (1)

e H

E L L

p Q Z y w v θ

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.15

0.05

0.95

0.80

0.30

0.19

0.2

0.1

6.6

6.4

4.5

4.3 0.65 6.6

6.2

0.4

0.3

0.5

0.2

0.13 0.1 0.2 1

DIMENSIONS (mm are the original dimensions)

Notes

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.

0.75

0.50

SOT360-1 MO-153 99-12-27

03-02-19

w M

0.25

1 10

20 11

pin 1 index

detail X

(A )

v M A

0 2.5 5 mm

scale

TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1

max.

1.1

Fig. 10. Package outline SOT360-1 (TSSOP20)

Product data sheet Rev. 5 — 14 July 2020 12 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

References

Outline

version

European

projection Issue date

IEC JEDEC JEITA

SOT764-1 - - -

MO-241

- - -

sot764-1_po

03-01-27

14-12-12

Unit

max

nom

min

1.00 0.05 4.6 3.15 2.6

0.5 3.5 0.1

A(1)

Dimensions (mm are the original dimensions)

Note

1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.

A1b

0.30

c D(1) DhE(1) Eh

1.00

e e1L

0.4

v w

0.05

y y1

0.90 0.02 0.2 4.5 3.00 2.50.25 0.05 0.1

0.85 0.30.80 0.00 4.4 2.85 2.40.18

1.15 0.5

detail X

B A

AC B

scale

2 9

19 12

terminal 1

index area

terminal 1

index area

0 5 mm2.5

DHVQFN20: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;

20 terminals; body 2.5 x 4.5 x 0.85 mm SOT764-1

Fig. 11. Package outline SOT764-1 (DHVQFN20)

Product data sheet Rev. 5 — 14 July 2020 13 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

12. Abbreviations

Table 10. Abbreviations

Acronym Description

CMOS Complementary Metal Oxide Semiconductor

DUT Device Under Test

ESD ElectroStatic Discharge

HBM Human Body Model

MM Machine Model

TTL Transistor-Transistor Logic

13. Revision history

Table 11. Revision history

Document ID Release date Data sheet status Change notice Supersedes

74HC_HCT245 v.5 20200714 Product data sheet - 74HC_HCT245 v.4

Modifications: •The format of this data sheet has been redesigned to comply with the identity

guidelines of Nexperia.

•Legal texts have been adapted to the new company name where appropriate.

•Table 4: Derating values for Ptot total power dissipation have been updated.

74HC_HCT245 v.4 20160226 Product data sheet - 74HC_HCT245 v.3

Modifications: •Type numbers 74HC245N and 74HCT245N (SOT146-1) removed.

74HC_HCT245 v.3 20050131 Product data sheet - 74HC_HCT245_CNV v.2

Modifications: •The format of this data sheet is redesigned to comply with the new presentation and

information standard of Philips Semiconductors

•Section 3 "Ordering information", Section 5 "Pinning information" and Section 11

"Package outline" are modified to include the DHVQFN20 package.

74HC_HCT245_CNV v.2 19930930 Product specification - -

Product data sheet Rev. 5 — 14 July 2020 14 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

14. Legal information

Data sheet status

Document status

[1][2]

Product

status [3]

Definition

Objective [short]

data sheet

Development This document contains data from

the objective specification for

product development.

Preliminary [short]

data sheet

Qualification This document contains data from

the preliminary specification.

Product [short]

data sheet

Production This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards,

customer (a) shall use the product without Nexperia’s warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

Nexperia’s specifications such use shall be solely at customer’s own risk,

and (c) customer fully indemnifies Nexperia for any liability, damages or failed

product claims resulting from customer design and use of the product for

automotive applications beyond Nexperia’s standard warranty and Nexperia’s

product specifications.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Product data sheet Rev. 5 — 14 July 2020 15 / 16

Nexperia 74HC245; 74HCT245

Octal bus transceiver; 3-state

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Ordering information....................................................1

4. Functional diagram.......................................................2

5. Pinning information......................................................3

5.1. Pinning.........................................................................3

5.2. Pin description............................................................. 3

6. Functional description................................................. 3

7. Limiting values............................................................. 4

8. Recommended operating conditions..........................4

9. Static characteristics....................................................5

10. Dynamic characteristics............................................ 7

10.1. Waveforms and test circuit........................................ 8

11. Package outline........................................................ 10

12. Abbreviations............................................................ 14

13. Revision history........................................................14

14. Legal information......................................................15

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 14 July 2020

Product data sheet Rev. 5 — 14 July 2020 16 / 16