MC78M08CDT - ON Semiconductor

December, 2011 − Rev. 25

1Publication Order Number:

MC78M00/D

MC78M00, MC78M00A,

NCV78M00 Series

500 mA Positive Voltage

Regulators

The MC78M00/MC78M00A Series positive voltage regulators are

identical to the popular MC7800 Series devices, except that they are

specified for only half the output current. Like the MC7800 devices,

the MC78M00 three−terminal regulators are intended for local,

on−card voltage regulation.

Internal current limiting, thermal shutdown circuitry and safe−area

compensation for the internal pass transistor combine to make these

devices remarkably rugged under most operating conditions.

Maximum output current, with adequate heatsinking is 500 mA.

Features

•No External Components Required

•Internal Thermal Overload Protection

•Internal Short Circuit Current Limiting

•Output Transistor Safe−Area Compensation

•MC78M00A High Accuracy (±2%)

Available for 5.0 V, 8.0 V, 12 V and 15 V

•NCV Prefix for Automotive and Other Applications Requiring Site

and Control Changes

•Pb−Free Packages are Available*

Figure 1. Representative Schematic Diagram

This device contains 28 active transistors.

1.0 k 1.0 k Input

210

6.7

V16 k 100

200

300

3.6

6.4

520

6.0 k

2.0 k 3.9 k

6.0

k2.8 k

5.6 k

3.0 k

1.0 k

300

20050

0.24

GND

Output

10 pF

2.6 k

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

TO−220

T SUFFIX

CASE 221AB

DPAK−3

DT SUFFIX

CASE 369C

MARKING

DIAGRAMS

xxxxx = Device Type and Voltage Option Code

A = Assembly Location

L = Wafer Lot

Y = Year

WW = Work Week

G = Pb−Free Package

See detailed ordering and shipping information in the package

dimensions section on page 10−14 of this data sheet.

ORDERING INFORMATION

Heatsink surface

connected to Pin 2.

Pin 1. Input

2. Ground

3. Output

Heatsink surface (shown as terminal 4 in

case outline drawing) is connected to Pin 2.

AWLYWWG

78MxxXXT

http://onsemi.com

4xxxxxG

ALYWW

xx = Voltage Option

XX = Appropriate Suffix Options

A = Assembly Location

WL = Wafer Lot

Y = Year

WW = Work Week

G = Pb−Free Package

See general marking information in the device marking

section on page 10 of this data sheet.

DEVICE MARKING INFORMATION

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

MAXIMUM RATINGS (TA = 25°C, unless otherwise noted) (Note 1)

Rating Symbol Value Unit

Input Voltage (5.0 V−18 V) VI35 Vdc

(20 V−24V) 40

Power Dissipation (Package Limitation)

Plastic Package, T Suffix

TA = 25°C PDInternally Limited

Thermal Resistance, Junction−to−Air qJA 70 °C/W

Thermal Resistance, Junction−to−Case qJC 5.0 °C/W

Plastic Package, DT Suffix

TA = 25°C PDInternally Limited

Thermal Resistance, Junction−to−Air qJA 92 °C/W

Thermal Resistance, Junction−to−Case qJC 5.0 °C/W

Operating Junction Temperature Range TJ+150 °C

Storage Temperature Range Tstg −65 to +150 °C

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the

Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect

device reliability.

1. This device series contains ESD protection and exceeds the following tests:

Human Body Model 2000 V per MIL−STD−883, Method 3015.

Machine Model Method 200 V.

MC78M05C/AC/B/AB, NCV78M05AB/B ELECTRICAL CHARACTERISTICS (VI = 10 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤

5 W, unless otherwise noted) (Note 2)

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VOVdc

MC78M05B/MC78M05C/NCV78M05B 4.8 5.0 5.2

MC78M05AB/MC78M05AC/NCV78M05AB 4.9 5.0 5.1

Output Voltage Variation VOVdc

(7.0 Vdc ≤ VI ≤ 20 Vdc, 5.0 mA ≤ IO ≤ 350 mA)

MC78M05B/MC78M05C/NCV78M05B 4.75 −5.25

MC78M05AB/MC78M05AC/NCV78M05AB 4.80 −5.20

Line Regulation Regline −3.0 50 mV

(TJ = 25°C, 7.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA)

Load Regulation Regload mV

(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) −20 100

(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) −10 50

Input Bias Current (TJ = 25°C) IIB −3.2 6.0 mA

Quiescent Current Change DIIB mA

(8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8

(5.0 mA ≤ IO ≤ 350 mA) − − 0.5

Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn−40 −mV

Ripple Rejection RR dB

(IO = 100 mA, f = 120 Hz, 8.0 V ≤VI ≤ 18 V) 62 − −

(IO = 300 mA, f = 120 Hz, 8.0 ≤ VI ≤ 18 V, TJ = 25°C) 62 80 −

Dropout Voltage VI−VO−2.0 −Vdc

(TJ = 25°C)

Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS −350 −mA

Average Temperature Coefficient of Output Voltage DVO/DT−±0.2 −mV/°C

(IO = 5.0 mA)

Peak Output Current IO−700 −mA

(TJ = 25°C)

2. Tlow =0°C for MC78MxxAC, C Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B

=−40°C for MC78MxxAB, B, NCV78MxxAB, B

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

MC78M06C/B ELECTRICAL CHARACTERISTICS (VI = 11 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted)

(Note 3)

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VO5.75 6.0 6.25 Vdc

Output Voltage Variation VO5.7 −6.3 Vdc

(8.0 Vdc ≤ VI ≤ 21 Vdc, 5.0 mA ≤ IO ≤ 350 mA)

Line Regulation Regline −5.0 50 mV

(TJ = 25°C, 8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA)

Load Regulation Regload mV

(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) −20 120

(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) −10 60

Input Bias Current (TJ = 25°C) IIB −3.2 6.0 mA

Quiescent Current Change DIIB mA

(9.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8

(5.0 mA ≤ IO ≤ 350 mA) − − 0.5

Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn−45 −mV

Ripple Rejection RR dB

(IO = 100 mA, f = 120 Hz, 9.0 V ≤VI ≤ 19 V) 59 − −

(IO = 300 mA, f = 120 Hz, 9.0 V ≤VI ≤ 19 V, TJ = 25°C) 59 80 −

Dropout Voltage VI − VO−2.0 −Vdc

(TJ = 25°C)

Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS −350 −mA

Average Temperature Coefficient of Output Voltage DVO/DT−±0.2 −mV/°C

(IO = 5.0 mA)

Peak Output Current IO−700 −mA

(TJ = 25°C)

MC78M08C/AC/B/AB, NCV78M08B ELECTRICAL CHARACTERISTICS (VI = 14 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W,

unless otherwise noted) (Note 3)

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VOVdc

MC78M08B/MC78M08C/NCV78M08B 7.70 8.0 8.30

MC78M08AB/MC78M08AC 7.84 8.0 8.16

Output Voltage Variation VOVdc

(10.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA)

MC78M08B/MC78M08C/NCV78M08B 7.6 −8.4

MC78M08AB/MC78M08AC 7.7 −8.3

Line Regulation Regline −6.0 50 mV

(TJ = 25°C, 10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA)

Load Regulation Regload mV

(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) −25 160

(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) −10 80

Input Bias Current (TJ = 25°C) IIB −3.2 6.0 mA

Quiescent Current Change DIIB mA

(10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8

(5.0 mA ≤ IO ≤ 350 mA) − − 0.5

Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn−52 −mV

Ripple Rejection RR dB

(IO = 100 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V) 56 − −

(IO = 300 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V, TJ = 25°C) 56 80 −

Dropout Voltage VI−VO−2.0 −Vdc

(TJ = 25°C)

Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS −350 −mA

Average Temperature Coefficient of Output Voltage DVO/DT−±0.2 −mV/°C

(IO = 5.0 mA)

Peak Output Current IO−700 −mA

(TJ = 25°C)

3. Tlow =0°C for MC78MxxAC, C Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B

=−40°C for MC78MxxAB, B, NCV78MxxAB, B

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

MC78M09C/B ELECTRICAL CHARACTERISTICS (VI = 15 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise

noted) (Note 4)

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VO8.64 9.0 9.45 Vdc

Output Voltage Variation VO8.55 −9.45 Vdc

(11.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA)

Line Regulation Regline −6.0 50 mV

(TJ = 25°C, 11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA)

Load Regulation Regload mV

(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) −25 180

(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) −10 90

Input Bias Current (TJ = 25°C) IIB −3.2 6.0 mA

Quiescent Current Change DIIB mA

(11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8

(5.0 mA ≤ IO ≤ 350 mA) − − 0.5

Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn−52 −mV

Ripple Rejection RR dB

(IO = 100 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V) 56 − −

(IO = 300 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V, TJ = 25°C) 56 80 −

Dropout Voltage VI−VO−2.0 −Vdc

(TJ = 25°C)

Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS −350 −mA

Average Temperature Coefficient of Output Voltage DVO/DT−±0.2 −mV/°C

(IO = 5.0 mA)

Peak Output Current IO−700 −mA

(TJ = 25°C)

MC78M12C/AC/B/AB, NCV78M12B ELECTRICAL CHARACTERISTICS (VI = 19 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W,

unless otherwise noted) (Note 4)

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VOVdc

MC78M12B/MC78M12C/NCV78M12B 11.50 12 12.50

MC78M12AB/MC78M12AC 11.76 12 12.24

Output Voltage Variation VOVdc

(14.5 Vdc ≤ VI ≤ 27 Vdc, 5.0 mA ≤ IO ≤ 350 mA)

MC78M12B/MC78M12C/NCV78M12B 11.4 −12.6

MC78M12AB/MC78M12AC 11.5 −12.5

Line Regulation Regline −8.0 50 mV

(TJ = 25°C, 14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA)

Load Regulation Regload mV

(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) −25 240

(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) −10 120

Input Bias Current (TJ = 25°C) IIB −3.2 6.0 mA

Quiescent Current Change DIIB mA

(14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) − − 0.8

(5.0 mA ≤ IO ≤ 350 mA) − − 0.5

Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn−75 −mV

Ripple Rejection RR dB

(IO = 100 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V) 55 − −

(IO = 300 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V, TJ = 25°C) 55 80 −

Dropout Voltage VI−VO−2.0 −Vdc

(TJ = 25°C)

Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS −350 −mA

Average Temperature Coefficient of Output Voltage DVO/DT−±0.3 −mV/°C

(IO = 5.0 mA)

Peak Output Current IO−700 −mA

(TJ = 25°C)

4. Tlow =0°C for MC78MxxAC, C Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B

=−40°C for MC78MxxAB, B, NCV78MxxAB, B

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

MC78M15C/AC/B/AB, NCV78M15B ELECTRICAL CHARACTERISTICS (VI = 23 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W,

unless otherwise noted) (Note 5)

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VOVdc

MC78M15B/MC78M15C/NCV78M15B 14.4 15 15.6

MC78M15AB/MC78M15AC 14.7 15 15.3

Output Voltage Variation VOVdc

(17.5 Vdc ≤ VI ≤ 30 Vdc, 5.0 mA ≤ IO ≤ 350 mA)

MC78M15B/MC78M15C/NCV78M15B 14.25 −15.75

MC78M15AB/MC78M15AC 14.40 −15.60

Input Regulation Regline −10 50 mV

(TJ = 25°C, 17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA)

Load Regulation Regload mV

(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) −25 300

(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) −10 150

Input Bias Current (TJ = 25°C) IIB −3.2 6.0 mA

Quiescent Current Change DIIB mA

(17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) − − 0.8

(5.0 mA ≤ IO ≤ 350 mA) − − 0.5

Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn−90 −mV

Ripple Rejection RR dB

(IO = 100 mA, f = 120 Hz, 18.5 V ≤VI ≤ 28.5 V) 54 − −

(IO = 300 mA, f = 120 Hz, 18.5 V ≤VI ≤ 28.5 V, TJ = 25°C) 54 70 −

Dropout Voltage VI−VO−2.0 −Vdc

(TJ = 25°C)

Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS −350 −mA

Average Temperature Coefficient of Output Voltage DVO/DT−±0.3 −mV/°C

(IO = 5.0 mA)

Peak Output Current IO−700 −mA

(TJ = 25°C)

MC78M18C/B ELECTRICAL CHARACTERISTICS (VI = 27 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W,

unless otherwise noted) (Note 5)

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VO17.3 18 18.7 Vdc

Output Voltage Variation VO17.1 −18.9 Vdc

(21 Vdc ≤ VI ≤ 33 Vdc, 5.0 mA ≤ IO ≤ 350 mA)

Line Regulation Regline −10 50 mV

(TJ = 25°C, 21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA)

Load Regulation Regload mV

(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) −30 360

(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) −10 180

Input Bias Current (TJ = 25°C) IIB −3.2 6.5 mA

Quiescent Current Change DIIB mA

(21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) − − 0.8

(5.0 mA ≤ IO ≤ 350 mA) − − 0.5

Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn−100 −mV

Ripple Rejection RR dB

(IO = 100 mA, f = 120 Hz, 22 V ≤VI ≤ 32 V) 53 − −

(IO = 300 mA, f = 120 Hz, 22 V ≤VI ≤ 32 V, TJ = 25°C) 53 70 −

Dropout Voltage VI−VO−2.0 −Vdc

(TJ = 25°C)

Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS −350 −mA

Average Temperature Coefficient of Output Voltage DVO/DT−±0.3 −mV/°C

(IO = 5.0 mA)

Peak Output Current IO−700 −mA

(TJ = 25°C)

5. Tlow =0°C for MC78MxxAC, C Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B

=−40°C for MC78MxxAB, B, NCV78MxxAB, B

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

MC78M20C/B ELECTRICAL CHARACTERISTICS (VI = 29 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W,

unless otherwise noted) (Note 6)

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VO19.2 20 20.8 Vdc

Output Voltage Variation VO19 −21 Vdc

(23 Vdc ≤ VI ≤ 35 Vdc, 5.0 mA ≤ IO ≤ 350 mA)

Line Regulation Regline −10 50 mV

(TJ = 25°C, 23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA)

Load Regulation Regload mV

(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) −30 400

(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) −10 200

Input Bias Current (TJ = 25°C) IIB −3.2 6.5 mA

Quiescent Current Change DIIB mA

(23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) − − 0.8

(5.0 mA ≤ IO ≤ 350 mA) − − 0.5

Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn−110 −mV

Ripple Rejection RR dB

(IO = 100 mA, f = 120 Hz, 24 V ≤VI ≤ 34 V) 52 − −

(IO = 300 mA, f = 120 Hz, 24 V ≤VI ≤ 34 V, TJ = 25°C) 52 70 −

Dropout Voltage VI−VO−2.0 −Vdc

(TJ = 25°C)

Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS −350 −mA

Average Temperature Coefficient of Output Voltage DVO/DT−±0.5 −mV/°C

(IO = 5.0 mA)

Peak Output Current IO−700 −mA

(TJ = 25°C)

MC78M24C/B ELECTRICAL CHARACTERISTICS (VI = 33 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W,

unless otherwise noted) (Note 6)

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = 25°C) VO23 24 25 Vdc

Output Voltage Variation VO22.8 −25.2 Vdc

(27 Vdc ≤ VI ≤ 38 Vdc, 5.0 mA ≤ IO ≤ 350 mA)

Line Regulation Regline −10 50 mV

(TJ = 25°C, 27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA)

Load Regulation Regload mV

(TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) −30 480

(TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) −10 240

Input Bias Current (TJ = 25°C) IIB −3.2 7.0 mA

Quiescent Current Change DIIB mA

(27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) − − 0.8

(5.0 mA ≤ IO ≤ 350 mA) − − 0.5

Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn−170 −mV

Ripple Rejection RR dB

(IO = 100 mA, f = 120 Hz, 28 V ≤VI ≤ 38 V) 50 − −

(IO = 300 mA, f = 120 Hz, 28 V ≤VI ≤ 38 V, TJ = 25°C) 50 70 −

Dropout Voltage VI−VO−2.0 −Vdc

(TJ = 25°C)

Short Circuit Current Limit (TJ = 25°C) IOS −350 −mA

Average Temperature Coefficient of Output Voltage DVO/DT−±0.5 −mV/°C

(IO = 5.0 mA)

Peak Output Current IO−700 −mA

(TJ = 25°C)

6. Tlow =0°C for MC78MxxAC, C Thigh = +125°C for MC78MxxAB, AC, B, C

=−40°C for MC78MxxAB, B

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

DEFINITIONS

Line Regulation − The change in output voltage for a

change in the input voltage. The measurement is made under

conditions of low dissipation or by using pulse techniques

such that the average chip temperature is not significantly

affected.

Load Regulation − The change in output voltage for a

change in load current at constant chip temperature.

Maximum Power Dissipation − The maximum total

device dissipation for which the regulator will operate

within specifications.

Input Bias Current − That part of the input current that

is not delivered to the load.

Output Noise Voltage − The rms AC voltage at the

output, with constant load and no input ripple, measured

over a specified frequency range.

Long Term Stability − Output voltage stability under

accelerated life test conditions with the maximum rated

voltage listed in the devices’ electrical characteristics and

maximum power dissipation.

Figure 2. DPAK Thermal Resistance and Maximum

Power Dissipation versus P.C.B. Copper Length

Figure 3. Worst Case Power Dissipation

versus Ambient Temperature (TO−220)

, POWER DISSIPATION (W)

qJC = 5°C/W

PD(max) = 7.52 W

No Heat Sink

qHS = 20°C/W

qHS = 10°C/W Infinite Heat

Sink

R , THERMAL RESISTANCE

JAθ

JUNCTION-TO-AIR ( C/W)°

L, LENGTH OF COPPER (mm)

PD, MAXIMUM POWER DISSIPATION (W)

RqJA

5.0

3.0

2.0

1.0

0.5

0.3

0.2

0.1

100

TA, AMBIENT TEMPERATURE (°C)

25 50 75 100 125 150

0 10203025155.0

Free Air

Mounted

Vertically 2.0 oz. Copper

PD(max) for TA = 50°C

ÎÎÎÎ

0.4

0.8

1.2

1.6

2.0

2.4

Minimum

Size Pad

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

TJ = 25°C

Figure 4. Peak Output Current versus

Dropout Voltage

Figure 5. Dropout Voltage versus

Junction Temperature

Figure 6. Ripple Rejection versus Frequency Figure 7. Ripple Rejection versus Output Current

Figure 8. Bias Current versus Input Voltage

100

1.0 10 100 1.0 k 10 k 100 k 1.0 M 10 M 100 M

f, FREQUENCY (Hz)

RR, RIPPLE REJECTION (dB)

Iout = 500 mA

, DROPOUT VOLTAGE (V)

TJ, JUNCTION TEMPERATURE (°C)

2.5

2.0

1.5

1.0

0.5

00 25 50 75 100 125 150

-VV

DVO = 100 mV

IO = 500 mA

IO = 100 mA

IO = 10 mA

RR, RIPPLE REJECTION (dB)

IO, OUTPUT CURRENT (A)

100

0.01 0.1 0.5 1.0 10

Vout = 5.0 V

Vin = 10 V

CO = 0

f = 120 Hz

TJ = 25°C

, BIAS CURRENT (mA)

VI, INPUT VOLTAGE (Vdc)

4.0

3.0

2.0

1.0

00 5.0 10 15 20 25 30 35 40

TJ = 25°C

TJ = 125°C

TJ = 25°C

VO = 5.0 V

IO = 0.5 A

IO, OUTPUT CURRENT (A)

5.0

4.0

3.0

2.0

1.0

0.01 0.1 0.5 1.0 10

TJ = 125°C

VI-VO = 5.0 V

Figure 9. Bias Current versus Output Current

, OUTPUT CURRENT (A)

VI - VO, DROPOUT VOLTAGE (V)

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

00 5.0 10 15 20 25 30 35 40

TJ = 125°C

TJ = 25°C

, BIAS CURRENT (mA)

Iout = 500 mA

Vout = 5.0 V

Vin = 10 V

CO = 0

TJ = 25°C

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

APPLICATIONS INFORMATION

Design Considerations

The MC78M00/MC78M00A Series of fixed voltage

regulators are designed with Thermal Overload Protection

that shuts down the circuit when subjected to an excessive

power overload condition, Internal Short Circuit Protection

that limits the maximum current the circuit will pass, and

Output Transistor Safe−Area Compensation that reduces the

output short circuit current as the voltage across the pass

transistor is increased.

In many low current applications, compensation

capacitors are not required. However, it is recommended

that the regulator input be bypassed with a capacitor if the

regulator is connected to the power supply filter with long

wire lengths, or if the output load capacitance is large. An

input bypass capacitor should be selected to provide good

high frequency characteristics to insure stable operation

under all load conditions. A 0.33 mF or larger tantalum,

mylar, or other capacitor having low internal impedance at

high frequencies should be chosen. The bypass capacitor

should be mounted with the shortest possible leads directly

across the regulator’s input terminals. Normally good

construction techniques should be used to minimize ground

loops and lead resistance drops since the regulator has no

external sense lead.

The addition of an operational amplifier allows adjustment to higher

or intermediate values while retaining regulation characteristics.

The minimum voltage obtainable with this arrangement is 2.0 V

greater than the regulator voltage.

Input MC78M05C

Output

0.33 mF

10 k

MC1741

1.0 k

0.1 mF

The MC78M00 series can be current boosted with a PNP

transistor. The MJ2955 provides current to 5.0 A. Resistor R in

conjunction with the VBE of the PNP determines when the pass

transistor begins conducting; this circuit is not short circuit

proof. Input-output differential voltage minimum is increased

by VBE of the pass transistor.

XX = 2 digits of type number indicating voltage.

MC78MXXC

Input

Output

1.0 mF

MJ2955 or Equiv.

1.0 mF

The circuit of Figure 12 can be modified to provide supply protection

against short circuits by adding a short circuit sense resistor, Rsc,

and an additional PNP transistor. The current sensing PNP must be

able to handle the short circuit current of the three-terminal

regulator .Therefore, a 4.0 A plastic power transistor is specified.

XX = 2 digits of type number indicating voltage.

1.0 mF

MC78MXXC

MJ2955

or Equiv.

Input

Output

RSC

2N6049

or Equiv.

VO, 7.0 V to 20 V

Vin-Vout ≥ 2.0 V

Figure 10. Current Regulator

The MC78M00 regulators can also be used as a current source

when connected as above. In order to minimize dissipation the

MC78M05C is chosen in this application. Resistor R determines

the current as follows:

For example, a 500 mA current source would require R to be a

10W, 10 W resistor and the output voltage compliance would be

the input voltage less 7.0 V.

IO = 5.0 V

R+ IIB

IIB = 1.5 mA over line and load changes.

Input

0.33 mFR

MC78M05C

Constant

Current to

Grounded

Load

Figure 11. Adjustable Output Regulator

Figure 12. Current Boost Regulator Figure 13. Current Boost with

Short Circuit Protection

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

ORDERING INFORMATION

Device

Output

Voltage Temperature Range Package Marking Shipping†

MC78M05CDT

5.0 V

TJ = 0° to +125°C

DPAK−3 78M05

75 Units / Rail

MC78M05CDTG DPAK−3

(Pb−Free)

78M05

MC78M05CDTT5G DPAK−3

(Pb−Free)

78M05

2500 / Tape & Reel

MC78M05CDTRK DPAK−3 78M05

MC78M05CDTRKG DPAK−3

(Pb−Free)

78M05

MC78M05ACDT DPAK−3 8M05D

75 Units / Rail

MC78M05ACDTG DPAK−3

(Pb−Free)

8M05D

MC78M05ACDTRK DPAK−3 8M05D

2500 / Tape & Reel

MC78M05ACDTRKG DPAK−3

(Pb−Free)

8M05D

MC78M05CT TO−220 78M05CT

50 Units / Rail

MC78M05CTG TO−220

(Pb−Free)

78M05CT

MC78M05ACT TO−220 78M05ACT

50 Units / Rail

MC78M05ACTG TO−220

(Pb−Free)

78M05ACT

MC78M05ABDT

TJ = −40° to +125°C

DPAK−3 8M05A

75 Units / Rail

MC78M05ABDTG DPAK−3

(Pb−Free)

8M05A

MC78M05ABDTRK DPAK−3 8M05A

2500 / Tape & Reel

MC78M05ABDTRKG DPAK−3

(Pb−Free)

8M05A

NCV78M05ABDTRKG* DPAK−3

(Pb−Free)

8M05A 2500 / Tape & Reel

MC78M05ABT TO−220 78M05ABT

50 Units / Rail

MC78M05ABTG TO−220

(Pb−Free)

78M05ABT

MC78M05BDT DPAK−3 8M05B

75 Units / Rail

MC78M05BDTG DPAK−3

(Pb−Free)

8M05B

MC78M05BDTT5G DPAK−3

(Pb−Free)

8M05B

2500 / Tape & Reel

MC78M05BDTRK DPAK−3 8M05B

MC78M05BDTRKG DPAK−3

(Pb−Free)

8M05B

NCV78M05BDTRK* DPAK−3 8M05B

NCV78M05BDTRKG* DPAK−3

(Pb−Free)

8M05B

MC78M05BT TO−220 78M05BT

50 Units / Rail

MC78M05BTG TO−220

(Pb−Free)

78M05BT

NCV78M05BTG* TO−220

(Pb−Free)

78M05BT 50 Units / Rail

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

*NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and control

change.

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

ORDERING INFORMATION

Device

Output

Voltage Temperature Range Package Marking Shipping†

MC78M06CDT

6.0 V

TJ = 0° to +125°C

DPAK−3 78M06

75 Units / Rail

MC78M06CDTG DPAK−3

(Pb−Free)

78M06

MC78M06CDTRK DPAK−3 78M06

2500 / Tape & Reel

MC78M06CDTRKG DPAK−3

(Pb−Free)

78M06

MC78M06CT TO−220 78M06CT

50 Units / Rail

MC78M06CTG TO−220

(Pb−Free)

78M06CT

MC78M06BT

TJ = −40° to +125°C

TO−220 78M06BT

MC78M06BTG TO−220

(Pb−Free)

78M06BT

MC78M06BDTRKG DPAK−3

(Pb−Free)

8M06B 2500 / Tape & Reel

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

ORDERING INFORMATION

Device Shipping†

MarkingPackageTemperature Range

Output

Voltage

Device Shipping†

MarkingPackageTemperature Range

Output

Voltage

MC78M08CDT

8.0 V

TJ = 0° to +125°C

DPAK−3 78M08

75 Units / Rail

MC78M08CDTG DPAK−3

(Pb−Free)

78M08

MC78M08CDTRK DPAK−3 78M08

2500 Units / Tape & Reel

MC78M08CDTRKG DPAK−3

(Pb−Free)

78M08

MC78M08ACDT DPAK−3 8M08D

75 Units / Rail

MC78M08ACDTG DPAK−3

(Pb−Free)

8M08D

MC78M08ACDTRK DPAK−3 8M08D

2500 Units / Tape & Reel

MC78M08ACDTRKG DPAK−3

(Pb−Free)

8M08D

MC78M08CT TO−220 78M08CT

50 Units / Rail

MC78M08CTG TO−220

(Pb−Free)

78M08CT

MC78M08ACT TO−220 78M08ACT

MC78M08ACTG TO−220

(Pb−Free)

78M08ACT

MC78M08ABDT

TJ = −40° to +125°C

DPAK−3 8M08A

75 Units / Rail

MC78M08ABDTG DPAK−3

(Pb−Free)

8M08A

MC78M08ABDTRK DPAK−3 8M08A

2500 Units / Tape & Reel

MC78M08ABDTRKG DPAK−3

(Pb−Free)

8M08A

MC78M08ABT TO−220 78M08ABT

50 Units / Rail

MC78M08ABTG TO−220

(Pb−Free)

78M08ABT

MC78M08BDT DPAK−3 8M08B

75 Units / Rail

MC78M08BDTG DPAK−3

(Pb−Free)

8M08B

MC78M08BDTRK DPAK−3 8M08B

2500 Units / Tape & Reel

MC78M08BDTRKG DPAK−3

(Pb−Free)

8M08B

NCV78M08BDTRKG* DPAK−3

(Pb−Free)

8M08B 2500 Units / Tape & Reel

MC78M08BT TO−220 78M08BT

50 Units / Rail

MC78M08BTG TO−220

(Pb−Free)

78M08BT

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

*NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and control

change.

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

ORDERING INFORMATION

Device

Output

Voltage Temperature Range Package Marking Shipping†

MC78M09CDT

9.0 V

TJ = 0° to +125°C

DPAK−3 78M09 75 Units / Rail

MC78M09CDTG DPAK−3

(Pb−Free)

78M09 75 Units / Rail

MC78M09CDTRK DPAK−3 78M09 2500 Units / Tape & Reel

MC78M09CDTRKG DPAK−3

(Pb−Free)

78M09 2500 Units / Tape & Reel

MC78M09CT TO−220 78M09CT 50 Units / Rail

MC78M09CTG TO−220

(Pb−Free)

78M09CT 50 Units / Rail

MC78M09BDT

TJ = −40° to +125°C

DPAK−3 8M09B 75 Units / Rail

MC78M09BDTG DPAK−3

(Pb−Free)

8M09B 75 Units / Rail

MC78M09BDTRK DPAK−3 8M09B 2500 Units / Tape & Reel

MC78M09BDTRKG DPAK−3

(Pb−Free)

8M09B 2500 Units / Tape & Reel

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

ORDERING INFORMATION

Device Shipping†

MarkingPackageTemperature Range

Output

Voltage

Device Shipping†

MarkingPackageTemperature Range

Output

Voltage

MC78M12CDT

12 V

TJ = 0° to +125°C

DPAK−3 78M12

75 Units / Rail

MC78M12CDTG DPAK−3

(Pb−Free)

78M12

MC78M12CDTT5G DPAK−3

(Pb−Free)

78M12

2500 Units / Tape & Reel

MC78M12CDTRK DPAK−3 78M12

MC78M12CDTRKG DPAK−3

(Pb−Free)

78M12

MC78M12ACDT DPAK−3 8M12D

75 Units / Rail

MC78M12ACDTG DPAK−3

(Pb−Free)

8M12D

MC78M12ACDTRK DPAK−3 8M12D

2500 Units / Tape & Reel

MC78M12ACDTRKG DPAK−3

(Pb−Free)

8M12D

MC78M12CT TO−220 78M12CT

50 Units / Rail

MC78M12CTG TO−220 78M12CT

MC78M12ACT TO−220 78M12ACT

MC78M12ACTG TO−220

(Pb−Free)

78M12ACT

MC78M12ABDT

TJ = −40° to +125°C

DPAK−3 8M12A

75 Units / Rail

MC78M12ABDTG DPAK−3

(Pb−Free)

8M12A

MC78M12ABDTRK DPAK−3 8M12A

2500 Units / Tape & Reel

MC78M12ABDTRKG DPAK−3

(Pb−Free)

8M12A

MC78M12ABT TO−220 78M12ABT

50 Units / Rail

MC78M12ABTG TO−220

(Pb−Free)

78M12ABT

MC78M12BDT DPAK−3 8M12B

75 Units / Rail

MC78M12BDTG DPAK−3

(Pb−Free)

8M12B

MC78M12BDTRK DPAK−3 8M12B

2500 Units / Tape & Reel

MC78M12BDTRKG DPAK−3

(Pb−Free)

8M12B

NCV78M12BDTRK* DPAK−3 8M12B

2500 Units / Tape & Reel

NCV78M12BDTRKG* DPAK−3

(Pb−Free)

8M12B

MC78M12BT TO−220 78M12BT

50 Units / Rail

MC78M12BTG TO−220

(Pb−Free)

78M12BT

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

*NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and control

change.

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

ORDERING INFORMATION

Device

Output

Voltage Temperature Range Package Marking Shipping†

MC78M15CDT

15 V

TJ = 0° to +125°C

DPAK−3 78M15

75 Units / Rail

MC78M15CDTG DPAK−3

(Pb−Free)

78M15

MC78M15CDTT5G DPAK−3

(Pb−Free)

78M15

2500 Units / Tape & Reel

MC78M15CDTRK DPAK−3 78M15

MC78M15CDTRKG DPAK−3

(Pb−Free)

78M15

MC78M15ACDT DPAK−3 8M15D

75 Units / Rail

MC78M15ACDTG DPAK−3

(Pb−Free)

8M15D

MC78M15ACDTRK DPAK−3 8M15D

2500 Units / Tape & Reel

MC78M15ACDTRKG DPAK−3

(Pb−Free)

8M15D

MC78M15CT TO−220 78M15CT

50 Units / Rail

MC78M15CTG TO−220

(Pb−Free)

78M15CT

MC78M15ACT TO−220 78M15ACT

MC78M15ACTG TO−220

(Pb−Free)

78M15ACT

MC78M15ABDT

TJ = −40° to +125°C

DPAK−3 8M15A

75 Units / Rail

MC78M15ABDTG DPAK−3

(Pb−Free)

8M15A

MC78M15ABDTRK DPAK−3 8M15A

2500 Units / Tape & Reel

MC78M15ABDTRKG DPAK−3

(Pb−Free)

8M15A

MC78M15ABT TO−220 78M15ABT

50 Units / Rail

MC78M15ABTG TO−220

(Pb−Free)

78M15ABT

MC78M15BDT DPAK−3 8M15B

75 Units / Rail

MC78M15BDTG DPAK−3

(Pb−Free)

8M15B

NCV78M15BDTG* DPAK−3

(Pb−Free)

8M15B 75 Units / Rail

MC78M15BDTRK DPAK−3 8M15B

2500 Units / Tape & Reel

MC78M15BDTRKG DPAK−3

(Pb−Free)

8M15B

MC78M15BT TO−220 78M15BT

50 Units / Rail

MC78M15BTG TO−220

(Pb−Free)

78M15BT

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

*NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and control

change.

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

ORDERING INFORMATION

Device

Output

Voltage Temperature Range Package Marking Shipping†

MC78M18CDT

18 V

TJ = 0° to +125°C

DPAK−3 78M18

75 Units / Rail

MC78M18CDTG DPAK−3

(Pb−Free)

78M18

MC78M18CDTRK DPAK−3 78M18

2500 Units / Tape & Reel

MC78M18CDTRKG DPAK−3

(Pb−Free)

78M18

MC78M18CT TO−220 78M18CT

50 Units / Rail

MC78M18CTG TO−220

(Pb−Free)

78M18CT

MC78M18BT TJ = −40° to +125°CTO−220 78M18BT

MC78M18BTG TO−220

(Pb−Free)

78M18BT

MC78M20CT

20 V TJ = 0° to +125°C

TO−220 78M20CT

50 Units / Rail

MC78M20CTG TO−220

(Pb−Free)

78M20CT

MC78M20BT TJ = −40° to +125°CTO−220 78M20BT

MC78M24CT

24 V

TJ = 0° to +125°C

TO−220 78M24CT

MC78M24CTG TO−220

(Pb−Free)

78M24CT

MC78M24BT

TJ = −40° to +125°C

TO−220 78M24BT

MC78M24BTG TO−220

(Pb−Free)

78M24BT

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

*NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and control

change.

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

PACKAGE DIMENSIONS

DPAK−3

DT SUFFIX

CASE 369C−01

ISSUE D

0.005 (0.13) C

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

D0.235 0.245 5.97 6.22

E0.250 0.265 6.35 6.73

A0.086 0.094 2.18 2.38

b0.025 0.035 0.63 0.89

c2 0.018 0.024 0.46 0.61

b2 0.030 0.045 0.76 1.14

c0.018 0.024 0.46 0.61

e0.090 BSC 2.29 BSC

b3 0.180 0.215 4.57 5.46

L4 −−− 0.040 −−− 1.01

L0.055 0.070 1.40 1.78

L3 0.035 0.050 0.89 1.27

Z0.155 −−− 3.93 −−−

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME

Y14.5M, 1994.

2. CONTROLLING DIMENSION: INCHES.

3. THERMAL PAD CONTOUR OPTIONAL WITHIN DI-

MENSIONS b3, L3 and Z.

4. DIMENSIONS D AND E DO NOT INCLUDE MOLD

FLASH, PROTRUSIONS, OR BURRS. MOLD

FLASH, PROTRUSIONS, OR GATE BURRS SHALL

NOT EXCEED 0.006 INCHES PER SIDE.

5. DIMENSIONS D AND E ARE DETERMINED AT THE

OUTERMOST EXTREMES OF THE PLASTIC BODY.

6. DATUMS A AND B ARE DETERMINED AT DATUM

PLANE H.

12 3

5.80

0.228

2.58

0.102

1.60

0.063

6.20

0.244

3.00

0.118

6.17

0.243

ǒmm

inchesǓ

SCALE 3:1

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and

Mounting Techniques Reference Manual, SOLDERRM/D.

SOLDERING FOOTPRINT*

H0.370 0.410 9.40 10.41

A1 0.000 0.005 0.00 0.13

L1 0.108 REF 2.74 REF

L2 0.020 BSC 0.51 BSC

DETAIL A

SEATING

PLANE

L2 GAUGE

PLANE

DETAIL A

ROTATED 90 CW5

MC78M00, MC78M00A, NCV78M00 Series

http://onsemi.com

PACKAGE DIMENSIONS

TO−220, SINGLE GAUGE

CASE 221AB−01

ISSUE A

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCHES.

3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND

LEAD IRREGULARITIES ARE ALLOWED.

4. PRODUCT SHIPPED PRIOR TO 2008 HAD DIMENSIONS

S = 0.045 - 0.055 INCHES (1.143 - 1.397 MM)

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A0.570 0.620 14.48 15.75

B0.380 0.405 9.66 10.28

C0.160 0.190 4.07 4.82

D0.025 0.035 0.64 0.88

F0.142 0.147 3.61 3.73

G0.095 0.105 2.42 2.66

H0.110 0.155 2.80 3.93

J0.018 0.025 0.46 0.64

K0.500 0.562 12.70 14.27

L0.045 0.060 1.15 1.52

N0.190 0.210 4.83 5.33

Q0.100 0.120 2.54 3.04

R0.080 0.110 2.04 2.79

S0.020 0.024 0.508 0.61

T0.235 0.255 5.97 6.47

U0.000 0.050 0.00 1.27

V0.045 --- 1.15 ---

Z--- 0.080 --- 2.04

123

SEATING

PLANE

−T−

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

MC78M00/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative