RMB2S ........ RMB6S 0.8 Amp. Miniature Single Phase Glass Passivated Fast Recovery Surface Mount Bridge Rectifier TO-269AA / MBS Current 0.8 A Voltage 200 V to 600 V FEATURES Saves space on printed circuit boards Ideal for automated placement High surge current capability Fast recovery, low switching loss Solder dip 260C, 10s Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C MECHANICAL DATA Case : TO-269AA/MBS. Epoxy meets UL 94V-0 flammability rating. Polarity: As marked on body. Terminals : Matte tin plated leads, solderable per MIL-STD-750 Method 2026, J-STD-002 and JESD22-B102. Consumer grade, meets JESD 201 class 1A whisker test. TYPICAL APPLICATIONS Used in general purpose ac-to-dc bridge full wave rectification for power supply, lighting ballaster, Battery charger, home appliances, office equipement, and terlecommunication applications. Maximun Ratings and Electrical Characteristics at 25C Marking Code RMB2S RMB4S RMB6S RMB2 RMB4 RMB6 VRRM Maximum Recurrent Peak Reverse Voltage (V) 200 400 600 VRMS Maximum RMS Voltage (V) 140 280 420 VDC Maximum DC Blocking Voltage (V) 200 400 600 IF(AV) Maximum Average Forward Output Current On glass-epoxy P.C.B. On aluminum substrate IFSM Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) 30 A VF Maximum Instantaneous Forward Voltage @ 0.4 A 1.0 V IR Maximum DC Reverse Current @ Ta = 25 C at Rated DC Blocking Voltage @ Ta = 125 C 5 A 100 A Trr Maximum Reverse Recovery Time from IF = 0.5 A, IR =1 A, IRR = 0.25 A 150 ns Cj Typical Junction Capacitance Per Leg 13 pF Rth (j-a) Typical Thermal Resistance Per Leg Tj Operating Temperature Range -55 to + 150 C Tstg Storage Temperature Range -55 to + 150 C www.fagorelectronica.com Document Name: rmb-s 0.5 A 0.8 A 85 C/W Version: Nov-11 Page Number: 1/4 RMB2S ........ RMB6S 0.8 Amp. Miniature Single Phase Glass Passivated Fast Recovery Surface Mount Bridge Rectifier Ordering information PREFERRED P/N PACKAGE CODE RMB6S TR TR DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g) 13" diameter tape and reel 3,000 0.22 Package Outline Dimensions: (mm) TO-269AA / MBS 7 MAX 1.50.2 3.8 1.10.2 0.250.1 Mounting Pad Layout 1.2 Marking code 5.9 MC WWY 0.90.2 1.2 2.50.2 0.10.2 3 MAX 1.5 0.2 Year code Week code 0.60.2 2.50.2 4.70.2 www.fagorelectronica.com Document Name: rmb-s 2.5 Version: Nov-11 Page Number: 2/4 RMB2S ........ RMB6S 0.8 Amp. Miniature Single Phase Glass Passivated Fast Recovery Surface Mount Bridge Rectifier TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0.8 IF, instantaneous forward current (A) IF(AV), average forward rectified current (A) Ratings and Characteristics (Ta 25 C unless otherwise noted) Aluminum Substrate 0.7 0.6 0.5 Glass Epoxy P.C.B. 0.4 0.3 0.2 0.1 0 Resistive or Inductive Load 0 10 1 0.1 Tj = 25 C Pulse Width=300 s 1% Duty Cycle 0.01 0.2 0.4 0.6 0.8 20 40 60 80 100 120 140 160 1 1.2 1.4 1.6 VF, instantaneous forward voltage (V) MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG TYPICAL JUNCTION CAPACITANCE PER LEG 30 35 Ta=40C Single Half Sine Wave (JEDEC Method) 30 Cj, junction capacitance (pF) IFSM, peak forward surge current (A) Ambient temperature (C) 25 20 F=60 Hz 15 F=50 Hz 10 5 25 20 15 10 5 1 Cycle 0 10 1 Tj = 25 C f = 1.0 MHz Vsig = 50mVp-p 0 0.1 100 IR, instantaneous reverse leakage current (mA) Number of cycles 10 1 100 200 VR, reverse voltage (V) TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG 100 REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM trr 10W NON INDUCTIVE 50W NON INDUCTIVE Tj = 125 C +0.5A 10 (-) DUT (+) 50Vdc (approx) (-) 1 1W NON INDUCTIVE PULSE GENERATOR (NOTE 2) OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A 0.1 0.01 NOTES: 1. Rise Time = 7ns max. Input Impedance = 1 megohm 22 pf 2. Rise Time = 10 ns max. Sourse Impedance = 50 ohms Tj = 25 C 0 20 40 60 80 1cm SET TIME BASE FOR 5/ 10ns/ cm 100 Percent of rated peak reverse voltage (%) www.fagorelectronica.com Document Name: rmb-s Version: Nov-11 Page Number: 3/4 RMB2S ........ RMB6S 0.8 Amp. Miniature Single Phase Glass Passivated Fast Recovery Surface Mount Bridge Rectifier Disclaimer All product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. Fagor Electronica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge of typical requirements that are often placed on Fagor products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed therein. Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Fagor product could result in personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their respective owners. www.fagorelectronica.com Document Name: rmb-s Version: Nov-11 Page Number: 4/4