POWER 600Watts VOLTAGE 6.8 to 440 Volts P6KE6.8 THRU P6KE440CA Features * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * 600W peak pulse power capability with a 10/100S waveform, reptition rate(duty cycle) : 0.01% * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less than 1.0ps from 1 Volts to V(BR) for uni-directional and 5.0ns for Bi-directional types * Typical ID less than 1.0A above 10V * High temperature soldering guaranteed : 265/10seconds, 0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension DO-15 0.140(3.6) 0.104(2.6) DIA. 1.0(25.4) MIN. 0.300(7.6) 0.230(5.8) Mechanical Data * Case : DO-15 molded plastic body over passivated junction * Terminals : Solder plated axial leads, solderable per MIL-STD-750, method 2026 * Polarity : For uni-directional types the color band denotes cathode end. which is positive with respect to the anode under normal TVS operation * Mounting Position : Any * Weight : 0.014 ounce, 0.33 gram 1.0(25.4) MIN. 0.034(0.9) 0.028(0.7) DIA. Dimensions in inches and (millimeters) Devices For Bidirectional Applications * For bi-directional use C or CA suffix for types P6KE7.5 thru types P6KE440CA(e.g. P6KE10C, P6KE220CA), electrical characteristics apply in both directions. Maximum Ratings And Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified) Symbols Values Units Peak power dissipation with a 10/1000S waveform (Note 1. Fig. 3) PPPM Min.600 Watts Peak pulse current with a 10/1000S waveform (Note 1) IPPM See Table 1 Amps PM(AV) 5.0 Watts IFSM 100.0 Amps VF 3.5/50 Volts TJ,TSTG -55 to +175 Steady state power dissipation at TL=75 lead length 0.375"(9.5mm) (Note2) Peak forward surge current, 8.3mm single half sine-wave superimposed on rated load(JEDEC method) undirectional (Note 3) Maximum instantaneous forward voltage at 50A for unidirectional only(Note4) Operating junction and storage temperature range Notes: (1) Non repetitive current pulse, per Fig.3 and derated above TA=25 per Fig.2 (2) Mounted on copper pads area of 1.6x1.6"(40x40mm) per Fig.5 (3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum (4) VF=3.5 Volts max. for devices of V(BR)220V, and VF=5.0 Volts max. for devices of V(BR)>220V ELECTRICAL CHARACTERISTIC at (TA=25 unless other specified) Breakdown Voltage V(BR) (Volts) (Note 1) Stand-off Voltage VWM (Volts) Max. Reverse Leakage at VWM ID(Note2) (A) Max. Peak Pulse Current IPPM(Note 2) (Amps) Max. Clamping Voltage at IPPM VC(VOLTS) Max. Temp Coefficient of V(BR) (%/) Max. Min. Test Current at IT (mA) P6KE6.8 6.12 7.48 10 5.50 1000 55.6 10.8 0.057 P6KE6.8A 6.45 7.14 10 5.80 1000 57.1 10.5 0.057 P6KE7.5 6.75 8.25 10 6.05 500 51.3 11.7 0.061 P6KE7.5A P6KE8.2 7.13 7.38 7.88 9.02 10 10 6.40 6.63 500 200 53.1 48.0 11.3 12.5 0.061 0.065 P6KE8.2A 7.79 8.61 10 7.02 200 49.6 12.1 0.065 P6KE9.1 8.19 10.0 1.0 7.37 50 43.5 13.8 0.068 P6KE9.1A 8.65 9.55 1.0 7.78 50 44.8 13.4 0.068 P6KE10 9.00 11.0 1.0 8.10 10 40.0 15.0 0.073 P6KE10A 9.50 10.5 1.0 8.55 10 41.4 14.5 0.073 P6KE11 9.90 12.1 1.0 8.92 5.0 37.0 16.2 0.075 P6KE11A P6KE12 10.5 10.8 11.6 13.2 1.0 1.0 9.40 9.72 5.0 5.0 38.5 34.7 15.6 17.3 0.075 0.078 P6KE12A 11.4 12.6 1.0 10.2 5.0 35.9 16.7 0.078 P6KE13 11.7 14.3 1.0 10.5 5.0 31.6 19.0 0.081 P6KE13A 12.4 13.7 1.0 11.1 5.0 33.0 18.2 0.081 P6KE15 13.5 16.5 1.0 12.1 5.0 27.3 22.0 0.084 P6KE15A 14.3 15.8 1.0 12.8 5.0 28.3 21.2 0.084 P6KE16 14.4 17.6 1.0 12.9 5.0 25.5 23.5 0.086 P6KE16A P6KE18 15.2 16.2 16.8 19.8 1.0 1.0 13.6 14.5 5.0 5.0 26.7 22.6 22.5 26.5 0.086 0.088 P6KE18A 17.1 18.9 1.0 15.3 5.0 23.8 25.2 0.088 P6KE20 18.0 22.0 1.0 16.2 5.0 20.6 29.1 0.090 P6KE20A 19.0 21.0 1.0 17.1 5.0 21.7 27.7 0.090 P6KE22 19.8 24.2 1.0 17.8 5.0 18.8 31.9 0.092 P6KE22A 20.9 23.1 1.0 18.8 5.0 19.6 30.6 0.092 P6KE24 21.6 26.4 1.0 19.4 5.0 17.3 34.7 0.094 P6KE24A P6KE27 22.8 24.3 25.2 29.7 1.0 1.0 20.5 21.8 5.0 5.0 18.1 15.3 33.2 39.1 0.094 0.096 P6KE27A 25.7 28.4 1.0 23.1 5.0 16.0 37.5 0.096 P6KE30 27.0 33.0 1.0 24.3 5.0 13.8 43.5 0.097 P6KE30A 28.5 31.5 1.0 25.6 5.0 14.5 41.4 0.097 P6KE33 29.7 36.3 1.0 26.8 5.0 12.6 47.7 0.098 P6KE33A 31.4 34.7 1.0 28.2 5.0 13.1 45.7 0.098 P6KE36 32.4 39.6 1.0 29.1 5.0 11.5 52.0 0.099 P6KE36A 34.2 37.8 1.0 30.8 5.0 12.0 49.9 0.099 P6KE39 35.1 42.9 1.0 31.6 5.0 10.6 56.4 0.100 P6KE39A 37.1 41.0 1.0 33.3 5.0 11.1 53.9 0.100 P6KE43 38.7 47.3 1.0 34.8 5.0 9.7 61.9 0.101 P6KE43A 40.9 45.2 1.0 36.8 5.0 10.1 59.3 0.101 P6KE47 42.3 51.7 1.0 38.1 5.0 8.8 67.8 0.101 P6KE47A 44.7 49.4 1.0 40.2 5.0 9.3 64.8 0.101 P6KE51 45.9 56.1 1.0 41.3 5.0 8.2 73.5 0.102 P6KE51A 48.5 53.6 1.0 43.6 5.0 8.6 70.1 0.102 P6KE56 P6KE56A 50.4 53.2 61.6 58.8 1.0 1.0 45.4 47.8 5.0 5.0 7.5 7.8 80.5 77.0 0.103 0.103 Device Type ELECTRICAL CHARACTERISTIC at (TA=25 unless other specified) Breakdown Voltage VF(BR) (Volts) (Note 1) Stand-off Voltage VWM (Volts) Max. Reverse Leakage at VWM ID(Note2) (A) Max. Peak Pulse Current IPPM(Note 2) (Amps) Max. Clamping Voltage at IPPM VC(VOLTS) Max. Temp Coefficient of V(BR) (%/) Max. Min. Test Current at IT (mA) P4KE62 55.8 68.2 1.0 50.2 5.0 6.7 89.0 0.104 P4KE62A 58.9 65.1 1.0 53.0 5.0 7.1 85.0 0.104 P4KE68 61.2 74.8 1.0 55.1 5.0 6.1 98.0 0.104 P4KE68A P4KE75 64.6 67.5 71.4 82.5 1.0 1.0 58.1 60.7 5.0 5.0 6.5 5.6 92.0 108 0.104 0.105 P4KE75A 71.3 78.8 1.0 64.1 5.0 5.8 103 0.105 P4KE82 73.8 90.2 1.0 66.4 5.0 5.1 118 0.105 P4KE82A 77.9 86.1 1.0 70.1 5.0 5.3 113 0.105 P4KE91 81.9 100 1.0 73.7 5.0 4.6 131 0.106 P4KE91A 86.5 95.5 1.0 77.8 5.0 4.8 125 0.106 P4KE100 90.0 110 1.0 81.0 5.0 4.2 144 0.106 P4KE100A P4KE110 95.0 99.0 105 121 1.0 1.0 85.5 89.2 5.0 5.0 4.4 3.8 137 158 0.106 0.107 P4KE110A 105 116 1.0 94.0 5.0 3.9 152 0.107 P4KE120 108 132 1.0 97.2 5.0 3.5 173 0.107 P4KE120A 114 126 1.0 102 5.0 3.6 165 0.107 P4KE130 117 143 1.0 105 5.0 3.2 187 0.107 P4KE130A 124 137 1.0 111 5.0 3.4 179 0.107 P4KE150 135 165 1.0 121 5.0 2.8 215 0.108 P4KE150A P4KE160 143 144 158 176 1.0 1.0 128 130 5.0 5.0 2.9 2.6 207 230 0.108 0.108 P4KE160A 152 168 1.0 136 5.0 2.7 219 0.108 P4KE170 153 187 1.0 138 5.0 2.5 244 0.108 P4KE170A 162 179 1.0 145 5.0 2.6 234 0.108 P4KE180 162 198 1.0 146 5.0 2.3 258 0.108 P4KE180A 171 189 1.0 154 5.0 2.4 246 0.108 P4KE200 180 220 1.0 162 5.0 2.1 287 0.108 P4KE200A P4KE220 190 198 210 242 1.0 1.0 171 175 5.0 5.0 2.2 1.7 274 344 0.108 0.108 P4KE220A 209 231 1.0 185 5.0 1.8 328 0.108 P4KE250 225 275 1.0 202 5.0 1.7 360 0.110 P4KE250A 237 263 1.0 214 5.0 1.7 344 0.110 P4KE300 270 330 1.0 243 5.0 1.4 430 0.110 P4KE300A 285 315 1.0 256 5.0 1.4 414 0.110 P4KE350 315 385 1.0 284 5.0 1.2 504 0.110 P4KE350A 333 368 1.0 300 5.0 1.2 482 0.110 P4KE400 360 440 1.0 324 5.0 1.0 574 0.110 P4KE400A 380 420 1.0 342 5.0 1.1 548 0.110 P4KE440 396 484 1.0 356 5.0 0.95 631 0.110 P4KE440A 418 462 1.0 376 5.0 1.0 602 0.110 Device Type Notes: (1) V(BR) measured after IT applied for 300S, IT=square wave pulse or equivalent. (2) Surge current waveform per Fig.3 and derated per Fig.2 (3) For bidirctional types having VWM of 10 Volts and less. The ID limit is doubled. RATINGS AND CHARACTERISTIC CURVES P6KE6.8 THRU P6KE440CA FIG.1-PEAK PULSE POWER RATING CURVE FIG.2-PULSE DERATING CURVE PEAK PULSE POWER(PPP) OR CURRENT (IPPM) DERATING IN PERCENTAGE,% PPPM, PEAK PULSE POWER, KW 100 NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG.3 TA =25 10 1.0 100 75 50 25 0.1 0 0.1mS 1.0mS 10mS 100mS 1.0mS 0 10mS 25 75 100 125 150 175 200 FIG.4-TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL FIG.3-PULSE WAVEFORM 100,000 150 tr=10msec. PEAK VALUE IPPM 100 6000 PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPPM MEASURED at ZERO BIAS CJ,JUNCTION CAPACITANCE,pF PPPM, PEAK PULSE current (%) 50 TA, AMBIENT TEMPERATURE () td, PULSE WIDTH, sec. HALF VALUE-IPPM 2 50 10/100msec.WAVEFORM as DEFINED by R.E.A. td 0 0 1.0 2.0 3.0 1000 TJ =25 f=1.0MHz Vsig=50mVp-p MEASURED at STAND-OFF VOLTAGE, VWM 100 4.0 10 t, TIME, ms 1.0 10 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS FIG.6-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY FIG.5-STEADY STATE POWER DERATING CURVE L=0.375"(9.5mm) LEAD LENGTHS IFSM, PEAK FORWARD SURGE CURRENT, AMPERES PM(AV), STEADY STATE POWER DISSIPATION, WATTS 5.00 60Hz RESISTIVE OR INDUCTIVE LOAD 3.75 2.50 1.6X1.6X0.040" (40X40X1mm) COPPER HEAT SINKS 1.25 0 0 25 50 75 100 125 TL, LEAD TEMPERATURE () 150 175 200 200 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 0 1 10 NUMBER OF CYCLES AT 60HZ 100 RATINGS AND CHARACTERISTIC CURVES P6KE6.8 THRU P6KE440CA FIG7-TYPICAL REVERSE LEAKAGE CHARACTERISTICS ID, INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 10 MEASURED AT DEVICES STAND-OFF VOLTAGE, VWM 1 0.1 TA=25 0.01 0.001 0 100 200 300 400 440 500 V(BR), BREAKDOWN VOLTAGE, VOLTS Description This P6KE TVS series is a low cost commercial products for use in applications where large voltage transients can permanently damage voltage-sensitive components. The P6KE series device types are designed in a small package size where power and space is a consideration. They are characterized by their high surge capability, extremely fast response time, and low impedance, (Ron). Because of the unpredictable nature of transients, and the variation of the impedance with respect to these transients, per se, is not specified as a parametric value. However, a minimum voltage at low current conditions (BV) and a maximum clamping voltage (Vc) at a maximum peak pulse current is specified. In some instances, the thermal effect (see Vc clamping voltage) may be responsible for 50% to 70%, of the oberved voltage differential when subjected to high pulses for several duty cycle, thus making a maximum impedance specification insignificant. In case of a severe current overload or abnromal transient beyond the maximum ratings. The Tansient Voltage Suppressors will initially fail "short" thus tripping this system circuit breaker or fuse while protecting the entire circuit. Curves depicting clamping voltage vs, various current pulses are available from the factory. Extended power curves vs, pulse time are also available.