LM833 Dual Audio Operational Amplifier General Description Features The LM833 is a dual general purpose operational amplifier designed with particular emphasis on performance in audio systems. This dual amplifier IC utilizes new circuit and processing techniques to deliver low noise, high speed and wide bandwidth without increasing external components or decreasing stability. The LM833 is internally compensated for all closed loop gains and is therefore optimized for all preamp and high level stages in PCM and HiFi systems. The LM833 is pin-for-pin compatible with industry standard dual operational amplifiers. Wide dynamic range: >140dB Low input noise 4.5nV/Hz voltage: High slew rate: High gain bandwidth: 7 V/s (typ); 5V/s (min) 15MHz (typ); 10MHz (min) Wide power bandwidth: 120KHz Low distortion: 0.002% Low offset voltage: 0.3mV Large phase margin: 60 Available in 8 pin MSOP package Schematic Diagram (1/2 LM833) 521801 PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. 5218 SNOSBD8E Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 Connection Diagram 521802 Order Number LM833M, LM833MX, LM833AM, LM833AMX, LM833N, LM833MM or LM833MMX See NS Package Number M08A, N08E or MUA08A 2 Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and specifications. Supply Voltage VCC-VEE 36V Differential Input Voltage (Note 3) VI 30V Input Voltage Range (Note 3) VIC 15V Power Dissipation (Note 4) PD 500 mW -40 85C Operating Temperature Range TOPR -60 150C Storage Temperature Range TSTG Soldering Information Dual-In-Line Package Soldering (10 seconds) Small Outline Package (SOIC and MSOP) Vapor Phase (60 seconds) Infrared (15 seconds) ESD tolerance (Note 5) DC Electrical Characteristics 260C 215C 220C 1600V (Note 1, Note 2) (TA = 25C, VS = 15V) Symbol Parameter Conditions Min Typ RS = 10 VOS Input Offset Voltage IOS Input Offset Current IB Input Bias Current AV Voltage Gain VOM Output Voltage Swing VCM Input Common-Mode Range CMRR Common-Mode Rejection Ratio VIN = 12V PSRR Power Supply Rejection Ratio VS = 15 5V, -15 -5V IQ Supply Current VO = 0V, Both Amps Max Units 0.3 5 mV 10 200 nA 500 1000 nA RL = 2 k, VO = 10V 90 110 dB RL = 10 k 12 13.5 V RL = 2 k 12 13.4 V 12 14.0 V 80 100 dB 80 100 dB 5 8 mA AC Electrical Characteristics (TA = 25C, VS = 15V, RL = 2 k) Symbol Parameter Conditions Min Typ Max Units SR Slew Rate RL = 2 k 5 7 V/s GBW Gain Bandwidth Product f = 100 kHz 10 15 MHz VNI Equivalent Input Noise Voltage (LM833AM, LM833AMX) RIAA, RS = 2.2 k (Note 6) V 1.4 Design Electrical Characteristics (TA = 25C, VS = 15V) The following parameters are not tested or guaranteed. Symbol VOS/T Parameter Conditions Average Temperature Coefficient Typ Units 2 V/C 0.002 % of Input Offset Voltage THD Distortion en Input Referred Noise Voltage RL = 2 k, f = 2020 kHz VOUT = 3 Vrms, AV = 1 Copyright (c) 1999-2012, Texas Instruments Incorporated RS = 100, f = 1 kHz 4.5 3 LM833 Symbol 4 Parameter Conditions Typ Units in Input Referred Noise Current f = 1 kHz 0.7 PBW Power Bandwidth VO = 27 Vpp, RL = 2 k, THD 1% 120 kHz fU Unity Gain Frequency Open Loop 9 MHz M Phase Margin Open Loop 60 deg Input Referred Cross Talk f = 2020 kHz -120 dB Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions which guarantee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters where no limit is given, however, the typical value is a good indication of device performance. Note 2: All voltages are measured with respect to the ground pin, unless otherwise specified. Note 3: If supply voltage is less than 15V, it is equal to supply voltage. Note 4: This is the permissible value at TA 85C. Note 5: Human body model, 1.5 k in series with 100 pF. Note 6: RIAA Noise Voltage Measurement Circuit Typical Performance Characteristics Maximum Power Dissipation vs Ambient Temperature Input Bias Current vs Ambient Temperature 521804 Input Bias Current vs Supply Voltage 521805 Supply Current vs Supply Voltage 521807 521806 Copyright (c) 1999-2012, Texas Instruments Incorporated 5 LM833 DC Voltage Gain vs Ambient Temperature DC Voltage Gain vs Supply Voltage 521808 Voltage Gain & Phase vs Frequency 521809 Gain Bandwidth Product vs Ambient Temperature 521810 Gain Bandwidth vs Supply Voltage Slew Rate vs Ambient Temperature 521812 6 521811 521813 Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 Slew Rate vs Supply Voltage Power Bandwidth 521815 521814 CMR vs Frequency Distortion vs Frequency 521819 PSRR vs Frequency 521820 Maximum Output Voltage vs Supply Voltage 521818 521816 Copyright (c) 1999-2012, Texas Instruments Incorporated 7 LM833 Maximum Output Voltage vs Ambient Temperature Spot Noise Voltage vs Frequency 521821 521817 Spot Noise Current vs Frequency Input Referred Noise Voltage vs Source Resistance 521823 521822 Noninverting Amp Noninverting Amp 521824 8 521825 Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 Inverting Amp 521826 Application Hints The LM833 is a high speed op amp with excellent phase margin and stability. Capacitive loads up to 50 pF will cause little change in the phase characteristics of the amplifiers and are therefore allowable. Capacitive loads greater than 50 pF must be isolated from the output. The most straightforward way to do this is to put a resistor in series with the output. This resistor will also prevent excess power dissipation if the output is accidentally shorted. Noise Measurement Circuit 521827 Complete shielding is required to prevent induced pick up from external sources. Always check with oscilloscope for power line noise. Total Gain: 115 dB @f = 1 kHz Input Referred Noise Voltage: en = V0/560,000 (V) Copyright (c) 1999-2012, Texas Instruments Incorporated 9 LM833 RIAA Noise Voltage Measurement Circuit 521855 10 Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 RIAA Preamp Voltage Gain, RIAA Deviation vs Frequency Flat Amp Voltage Gain vs Frequency 521828 521829 Typical Applications NAB Preamp NAB Preamp Voltage Gain vs Frequency 521831 521830 AV = 34.5 F = 1 kHz En = 0.38 V A Weighted Balanced to Single Ended Converter Adder/Subtracter 521833 VO = V1 + V2 - V3 - V4 521832 VO = V1-V2 Copyright (c) 1999-2012, Texas Instruments Incorporated 11 LM833 Sine Wave Oscillator 521834 Second Order Low Pass Filter (Butterworth) Second Order High Pass Filter (Butterworth) 521835 521836 Illustration is f0 = 1 kHz Illustration is f0 = 1 kHz 12 Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 State Variable Filter 521837 Illustration is f0 = 1 kHz, Q = 10, ABP = 1 AC/DC Converter 521838 Copyright (c) 1999-2012, Texas Instruments Incorporated 13 LM833 2 Channel Panning Circuit (Pan Pot) Line Driver 521839 521840 Tone Control 521841 Illustration is: fL = 32 Hz, fLB = 320 Hz fH =11 kHz, fHB = 1.1 kHz 521842 14 Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 RIAA Preamp 521803 Av = 35 dB En = 0.33 V S/N = 90 dB f = 1 kHz A Weighted A Weighted, VIN = 10 mV @f = 1 kHz Balanced Input Mic Amp 521843 Illustration is: V0 = 101(V2 - V1) Copyright (c) 1999-2012, Texas Instruments Incorporated 15 LM833 10 Band Graphic Equalizer 521844 fo (Hz) C1 C2 R1 R2 32 0.12F 4.7F 75k 500 64 0.056F 3.3F 68k 510 125 0.033F 1.5F 62k 510 250 0.015F 8200pF 0.82F 68k 470 500 0.39F 62k 470 1k 3900pF 0.22F 68k 470 2k 2000pF 0.1F 68k 470 4k 1100pF 0.056F 62k 470 8k 510pF 0.022F 68k 510 16k 330pF 0.012F 51k 510 Note 7: At volume of change = 12 dB Q = 1.7 Reference: "AUDIO/RADIO HANDBOOK", National Semiconductor, 1980, Page 2-61 16 Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 LM833 MDC MWC DUAL AUDIO OPERATIONAL AMPLIFIER 521854 Die Layout (A - Step) Die/Wafer Characteristics Fabrication Attributes General Die Information Physical Die Identification LM833A Bond Pad Opening Size (min) 110m x 110m Die Step A Bond Pad Metalization ALUMINUM Passivation VOM NITRIDE Back Side Metal BARE BACK Physical Attributes Wafer Diameter 150mm Dise Size (Drawn) 1219m x 1270m Back Side Connection 48mils x 50mils Thickness 406m Nominal Min Pitch 288m Nominal Floating Special Assembly Requirements: Note: Actual die size is rounded to the nearest micron. Die Bond Pad Coordinate Locations (A - Step) (Referenced to die center, coordinates in m) NC = No Connection SIGNAL NAME PAD NUMBER X/Y COORDINATES PAD SIZE X Y X Y OUTPUT A 1 -476 500 110 x 110 INPUT A- 2 -476 -212 110 x 110 INPUT A+ 3 -476 -500 110 x 110 VEE- 4 -0 -500 110 x 110 INPUT B+ 5 476 -500 110 x 110 INPUT B- 6 476 -212 110 x 110 OUTPUT B 7 476 500 110 x 110 VCC+ 8 0 500 110 x 110 Copyright (c) 1999-2012, Texas Instruments Incorporated 17 LM833 IN U.S.A Tel #: 1 877 Dial Die 1 877 342 5343 Fax: 1 207 541 6140 IN EUROPE Tel: 49 (0) 8141 351492 / 1495 Fax: 49 (0) 8141 351470 IN ASIA PACIFIC Tel: (852) 27371701 IN JAPAN Tel: 18 81 043 299 2308 Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 Physical Dimensions inches (millimeters) unless otherwise noted Molded Small Outline Package (M) Order Number LM833M or LM833MX LM833AM, LM833AMX NS Package Number M08A Molded Dual-In-Line Package (N) Order Number LM833N NS Package Number N08E Copyright (c) 1999-2012, Texas Instruments Incorporated 19 LM833 8-Lead (0.118" Wide) Molded Mini Small Outline Package Order Number LM833MM or LM833MMX NS Package Number MUA08A 20 Copyright (c) 1999-2012, Texas Instruments Incorporated LM833 Copyright (c) 1999-2012, Texas Instruments Incorporated 21 Notes Copyright (c) 1999-2012, Texas Instruments Incorporated IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated