Catalog 1308242 Issued 3-03 (pdf revised 1-06) P&B RT series (DC Coil) 16 Amp PC Board Miniature Relay File E22575 File LR15734 NR 6106 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25C * SPST through DPDT contact arrangements. * Immersion cleanable and flux tight versions available. * VDE 10mm spacing, 5kV dielectric, coil to contacts. * UL Class F (155C) coil insulation system. * Conforms to UL 508, 1873, 353 and 1950. * Low profile; 15.7mm height. * Sensitive coil; 400mW. * Withstand surge voltage of 10,000V. * Potter & Brumfield or Schrack brand. Voltage: 5 to 110VDC. Nominal Power @ 25C: 400mW. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 25C, 500VDC and 50% rel. humidity. Coil Construction: UL Class F (155C). Coil Data @ 25C Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 2,3. 2 Form A (DPST-NO) Wiring Diagram Code 5. 1 Form C (SPDT) Wiring Diagram Code 1, 2, 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 10 million operations. Initial Contact Resistance: 100 milliohms max @ 1A 12VDC. Designed to meet UL/CSA/VDE ratings @ 25C with relay properly vented. Remove vent nib after soldering and cleaning. Ratings @ 25C Code NO/NC Load 1 10A/10A @ 277VAC 10A/10A @ 30VDC 12A/12A @ 250VAC 12A/12A @ 30VDC 3/4 HP @ 480VAC* 1/2 HP @ 240VAC* 1/3 HP @ 120VAC* 48 LRA/10 FLA @ 240VAC* TV-3 @ 120VAC* A300, 720VA @ 240VAC* 3 5 Type Resistive/GP Resistive Resistive/GP Resistive Motor Motor Motor Motor Tungsten Pilot Duty Operations 100K 100K 30K 30K 6K 6K 6K 30K 25K 30K 16A/16A @ 250VAC 20A/20A @ 277VAC 20A/20A @ 24VDC 16A/16A @ 30VDC 1 HP @ 480VAC* 1 HP @ 240VAC* 1/2 HP @ 120VAC* 60 LRA/10 FLA @ 250VAC* TV-5 @ 120VAC* A300, 720VA @ 240VAC* B300, 360VA @ 240VAC** Resistive/GP Resistive/GP Resistive Resistive Motor Motor Motor Motor Tungsten Pilot Duty Pilot Duty 50K 30K 30K 30K 6K 6K 6K 30K 25K 30K 30K 8A/8A @ 277VAC 8A/8A @ 30VDC 10A/10A @ 250VAC 10A/10A @ 30VDC 1/2 HP @ 240VAC* 1/4 HP @ 120VAC* 34.8 LRA/6 FLA @ 120VAC* 17.4 LRA/5 FLA @ 240VAC* B300, 360VA @ 240VAC* TV-3 @120VAC* Resistive/GP Resistive Resistive/GP Resistive Motor Motor Motor Motor Pilot Duty Tungsten 100K 100K 30K 30K 6K 6K 30K 30K 30K 25K Nominal Voltage VDC DC Resistance in Ohms 10% Must Operate Voltage VDC Nominal Coil Current (mA) - 50/60Hz. 005 006 009 012 018 024 048 060 110 62 90 202 360 810 1,440 5,760 9,000 30,250 3.5 4.2 6.3 8.4 12.6 16.8 33.6 42.0 77.0 80 66.7 44.4 33.3 22.2 16.7 8.3 8.0 4.3 Max. Ambient Temp. vs. Coil Voltage Applied Coil Voltage (% of rated nom.) Contact Data 300 260 220 180 0A 8A 12A 16A 140 100 60 B 0 A 40 60 20 80 Max. Allowable Ambient Temp. (C) 100 A: Coil temperature = Ambient temperature. B: 110% of nominal coil voltage at rated contact load. Operate Data @ 25C Must Operate Voltage(DC): 70% of nominal. Must Release Voltage(DC): 10% of nominal. Operate Time (Excluding Bounce): 7 ms, typ., 15ms max. at nom. voltage. Release Time (Excluding Bounce): 3 ms, typ., 6ms max. at nom. voltage. Environmental Data * Form A only ** Form B only Temperature Range: Storage: -40C to +105C. Operating: -40C to +85C at rated current. Vibration, Operational N.O.:0.065"(1.65mm) max. excursions from 10 - 55 Hz: N.C.:0.032"(0.82mm) max. excursions from 10 - 55 Hz: with no contact opening >10s. Initial Dielectric Strength Mechanical Data Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Surge Voltage (DC): >10,000VAC x (1.2 x 50 sec). Termination: Printed circuit terminals. Enclosures: RT 1, 2, 3, 4: Flux-tight, top vented, plastic case. RT B, C, D, E: Immersion cleanable, plastic case. Weight: 0.35 oz. (10g) approximately. Dimensions are shown for 446 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 (pdf revised 1-06) P&B Ordering Information (DC Coil Models) Typical Part Number B RT B 3 4 012 F 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). 2 = 1 pole 12A, Pinning 5mm, flux-tight (Code 2). C = 1 pole 12A, Pinning 5mm, sealed (Code 2). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram codes 1, 2 or 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1, 2 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10 (standard stock). 5. Coil Voltage: 005 = 5VDC 009 = 9VDC 018 = 18VDC 048 = 48VDC 110 = 110VDC 006 = 6VDC 012 = 12VDC 024 = 24VDC 060 = 60VDC 5. Coil Insulation Classification, Brand and Case Color F = UL Class F, Potter & Brumfield Brand, Black Case Leave Blank = UL Class F, Schrack Brand, Orange Case Our authorized distributors are more likely to stock the following items for immediate delivery. RT114012F RTB14012F RT114024F RTB14024F RTB14005F RTB34012F RTD14005F RTD14012F RTD14024F RTB34024F RT314012F RT314024F RTD34012F RT424012F RT424024F RTE24005F RTE24012F RTE24024F RTE44012F RTE44024F Breaking Capacity Outline Dimensions 1 Pole .50 (12.7) 6X .031 X .020 (.80 X .52) 50 Contact Current A 1.14 (29) 2X .020 X .020 (.52 X .52) 10 B 5 2 1 0.5 .17 (4.3) 0.1 10 PC Board Layouts (Bottom View) 1 Pole 12A 3.5mm .051 DIA. (1.30) .051 DIA. (1.30) 20 50 100 DC Voltage 10 5 2 1 A B 0.5 0.1 10 200 300 20 50 100 DC Voltage 200 300 A: 1 Contact. B: 2 Contacts in series. A: 16A Version. B: 12A Version. 1 Pole 16A 2 Pole 8A 5mm 1 Pole 12A 5mm 2 Pole 50 Contact Current .62 (15.7) .051 DIA. (1.30) Contact Life for Resistive AC Load (Typical) .400 (10.16) .400 (10.16) .800 (20.32) .800 (20.32) 051 DIA. (1.30) .051 DIA. (1.30) .300 (7.62) Code 1 107 .051 DIA. (1.30) .300 (7.62) Code 2 .800 (20.32) .300 (7.62) Code 3 & 5 Notes: 1. On single throw models, only necessary terminals are present. 2. With the recommended PCB hole sizes, a grid with a pattern from 0.0984 to 0.1 in (2.5 - 2.54 mm) can be used. Operations .276 (7.0) A: 8A Model B: 12A Model C: 16A Model 106 B 5 10 A C 104 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 Breaking Capacity (kVA) Wiring Diagrams (Bottom View) 1 Pole 12A 1 Pole 16A 2 Pole 8A Codes 1 & 2 Code 3 Code 5 Note: Data from 250VAC @ 70C. Note: On single throw models, only necessary terminals are present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 447 Refer to inside back cover.