RF1S9530SM9A - Fairchild Semiconductor

File Number 2221.4

IRF9530, RF1S9530SM

12A, 100V, 0.300 Ohm, P-Channel Power

MOSFETs

These are P-Channel enhancement mode silicon gate power

ﬁeld effect transistors. They are advanced power MOSFETs

designed, tested, and guaranteed to withstand a speciﬁed

level of energy in the breakdown avalanche mode of

operation. All of these power MOSFETs are designed for

applications such as switching regulators, switching

convertors, motor drivers, relay drivers, and drivers for high

power bipolar switching transistors requiring high speed and

low gate drive power. The high input impedance allows these

types to be operated directly from integrated circuits.

Formerly developmental type TA17511.

Features

• 12A, 100V

•r

DS(ON) = 0.300Ω

• Single Pulse Avalanche Energy Rated

• SOA is Power Dissipation Limited

• Nanosecond Switching Speeds

• Linear Transfer Characteristics

• High Input Impedance

• Related Literature

- TB334, “Guidelines for Soldering Surface Mount

Components to PC Boards”

Symbol

Packaging

JEDEC TO-220AB JEDEC TO-263A

Ordering Information

PART NUMBER PACKAGE BRAND

IRF9530 TO-220AB IRF9530

RF1S9530SM TO-263AB RF1S9530

NOTE: When ordering, use the entire part number. Add the sufﬁx 9A to

obtain the TO-263AB variant in the tape and reel, i.e., RF1S9530SM9A.

GATE

DRAIN (FLANGE)

SOURCE

DRAIN DRAIN

(FLANGE)

GATE

SOURCE

Data Sheet July 1999

[ /Title

(IRF95

30,

RF1S9

530SM

)

/Sub-

ject (-

12A, -

100V,

0.300

Ohm,

P-

Chan-

nel

Power

MOS-

FETs)

/Author

()

/Key-

words

(Inter-

sil Cor-

poratio

n, P-

Chan-

nel

Power

MOS-

FETs,

TO-

220AB,

TO-

263AB)

/Cre-

ator ()

/DOCI

Absolute Maximum Ratings TC = 25oC, Unless Otherwise Speciﬁed

IRF9530,

RF1S9530SM UNITS

Drain to Source Breakdown Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDS -100 V

Drain to Gate Voltage (RGS = 20kΩ) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VDGR -100 V

Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID

TC = 100oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID

-12

-7.5

Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM -48 A

Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V

GS ±20 V

Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD 75 W

Dissipation Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6 W/oC

Single Pulse Avalanche Energy Rating (Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS 500 mJ

Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG -55 to 150 oC

Maximum Temperature for Soldering

Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL

Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tpkg

300

260

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the

device at these or any other conditions above those indicated in the operational sections of this speciﬁcation is not implied.

NOTE:

1. TJ = 25oC to TJ = 125oC.

Electrical Speciﬁcations TC = 25oC, Unless Otherwise Speciﬁed

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS

Drain to Source Breakdown Voltage BVDSS ID = -250µA, VGS = 0V, (Figure 10) -100 - - V

Gate Threshold Voltage VGS(TH) VGS = VDS, ID = -250µA -2 - -4 V

Zero Gate Voltage Drain Current IDSS VDS = Rated BVDSS, VGS = 0V - - -25 µA

VDS = 0.8 x Rated BVDSS, VGS = 0V, TC= 125oC- - -250 µA

On-State Drain Current (Note 2) ID(ON) VDS > ID(ON) x rDS(ON)MAX, VGS = -10V,

(Figure 7)

-12 - - A

Gate to Source Leakage Current IGSS VGS = ±20V - - ±100 nA

Drain to Source On Resistance (Note 2) rDS(ON) ID = -6.5A, VGS = -10V, (Figures 8, 9) - 0.250 0.300 Ω

Forward Transconductance (Note 2) gfs VDS > ID(ON) x rDS(ON) Max, ID = -6.5A

(Figure 12)

2 3.8 - S

Turn-On Delay Time td(ON) VDD = 50V, ID ≈ -12A, RG = 50Ω, VGS = 10V

RL = 4.2Ω, (Figures 17, 18)

MOSFET Switching Times are Essentially Inde-

pendent of Operating Temperature

-3060 ns

Rise Time tr- 70 140 ns

Turn-Off Delay Time td(off) - 70 140 ns

Fall Time tf- 70 140 ns

Total Gate Charge

(Gate to Source + Gate to Drain)

Qg(TOT) VGS = -10V, ID = -12A, VDSS= 0.8 x Rated BVDSS,

(Figure 14, 19, 20) Gate Charge

is Essentially Independent of Operating

Temperature

-2545nC

Gate to Source Charge Qgs -13 - nC

Gate to Drain (“Miller”) Charge Qgd -12 - nC

Input Capacitance CISS VDS = -25V, VGS = 0V, f = 1MHz, (Figure 11) - 500 - pF

Output Capacitance COSS - 300 - pF

Reverse Transfer Capacitance CRSS - 100 - pF

Internal Drain Inductance LDMeasured From the

Contact Screw On Tab To

Center of Die

Modified MOSFET

Symbol Showing the

Internal Devices

Inductances

- 3.5 - nH

Measured From the Drain

Lead, 6mm (0.25in) From

Package to Center of Die

- 4.5 - nH

Internal Source Inductance LSMeasured From The

Source Lead, 6mm

(0.25in) From Header to

Source Bonding Pad

- 7.5 - nH

Thermal Resistance Junction to Case RθJC - - 1.67 oC/W

Thermal Resistance Junction to Ambient RθJA Typical Socket Mount - - 62.5 oC/W

IRF9530, RF1S9530SM

Source to Drain Diode Speciﬁcations

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS

Continuous Source to Drain Current ISD Modified MOSFET

Symbol Showing the In-

tegral Reverse

P-N Junction Diode

---12A

Pulse Source to Drain Current

(Note 2)

ISDM ---48A

Source to Drain Diode Voltage (Note 2) VSD TJ = 25oC, ISD = -12A, VGS = 0V,

(Figure 13)

- - -1.5 V

Reverse Recovery Time trr TJ = 150oC, ISD = -12A, dISD/dt = 100A/µs - 300 - ns

Reverse Recovery Charge QRR TJ = 150oC, ISD = -12A, dISD/dt = 100A/µs - 1.8 - µC

NOTES:

2. Pulse test: pulse width ≤ 300µs, duty cycle ≤ 2%.

3. Repetitive rating: pulse width limited by max junction temperature. See Transient Thermal Impedance curve (Figure 3).

4. VDD = 25V, starting TJ = 25oC, L = 5.2mH, RG = 25Ω, peak IAS = 12A. See Figures 15, 16.

Typical Performance Curves Unless Otherwise Speciﬁed

FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE

TEMPERATURE

FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs

CASE TEMPERATURE

FIGURE 3. NORMALIZED MAXIMUM TRANSIENT THERMAL IMPEDANCE

TC, CASE TEMPERATURE (oC)

POWER DISSIPATION MULTIPLIER

0 25 50 75 100 150

0.2

0.4

0.6

0.8

1.0

1.2

125

-2.4

25 50 100

ID, DRAIN CURRENT (A)

TC, CASE TEMPERATURE (oC)

-12.0

150

-9.6

75 125

-4.8

-7.2

t1, RECTANGULAR PULSE DURATION (s)

ZθJC, NORMALIZED

THERMAL IMPEDANCE

10-3 10-2

10-5 10-4

0.01

0.1

10-1 1

SINGLE PULSE t2

NOTES:

DUTY FACTOR: D = t1/t2

PEAK TJ = PDM x ZθJC + RθJA +TC

PDM

0.1

0.02

0.2

0.5

0.01

0.05

IRF9530, RF1S9530SM

FIGURE 4. FORWARD BIAS SAFE OPERATING AREA FIGURE 5. OUTPUT CHARACTERISTICS

FIGURE 6. SATURATION CHARACTERISTICS FIGURE 7. TRANSFER CHARACTERISTICS

NOTE: Heating effect of 2µs pulse is minimal.

FIGURE 8. DRAIN TO SOURCE ON RESISTANCE vs GATE

VOLTAGE AND DRAIN CURRENT

FIGURE 9. NORMALIZED DRAIN TO SOURCE ON

RESISTANCE vs JUNCTION TEMPERATURE

Typical Performance Curves Unless Otherwise Speciﬁed (Continued)

VDS, DRAIN TO SOURCE VOLTAGE (V)

ID, DRAIN CURRENT (A)

-100

-1

100µs

10µs

1ms

100ms

-10-1

-0.1 -1000

-10

-100

LIMITED BY rDS(ON)

AREA MAY BE

OPERATION IN THIS 10ms

SINGLE PULSE

TJ = MAX RATED

TC = 25oC

ID, DRAIN CURRENT (A)

0 -10 -20 -30 -40

-4

-8

-12

-16

-20

-50

VGS = -8V

VGS = -7V

VGS = -6V

VGS = -5V

VDS, DRAIN TO SOURCE VOLTAGE (V)

VGS = -4V

PULSE DURATION = 80µs

VGS = -10V

VGS = -9V

DUTY CYCLE = 0.5% MAX

-2

0-2 -4 -6 -10

-4

-6

ID, DRAIN CURRENT (A)

VDS, DRAIN TO SOURCE VOLTAGE (V)

-8

-10

VGS = -6V

VGS = -5V

VGS = -4V

VGS = -9V

VGS = -10V

VGS = -8V

VGS = -7V

PULSE DURATION = 80µs

DUTY CYCLE = 0.5% MAX

0-4 -6 -8 -10-2

-12

-16

ID(ON), ON-STATE DRAIN CURRENT (A)

VGS, GATE TO SOURCE VOLTAGE (V)

-20

-8

-4

VDS ≥ ID(ON) x rDS(ON)

125oC

25oC

-55oC

PULSE DURATION = 80µs

DUTY CYCLE = 0.5% MAX

0.8

-10 -20 -30 -40

rDS(ON) DRAIN TO SOURCE

ID, DRAIN CURRENT (A)

-50

1.0

0.2

0.4

0.6

VGS = -10V

VGS = - 20V

2µs PULSE TEST

ON RESISTANCE (Ω)

NORMALIZED DRAIN TO SOURCE

2.2

1.4

1.0

0.6

0.2 -40 0 40

TJ, JUNCTION TEMPERATURE (oC)

120

1.8

VGS = -10V, ID = -6.5A

ON RESISTANCE

PULSE DURATION = 80µs

DUTY CYCLE = 0.5% MAX

IRF9530, RF1S9530SM

FIGURE 10. NORMALIZED DRAIN TO SOURCE BREAKDOWN

VOLTAGE vs JUNCTION TEMPERATURE

FIGURE 11. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE

FIGURE 12. TRANSCONDUCTANCE vs DRAIN CURRENT FIGURE 13. SOURCE TO DRAIN DIODE VOLTAGE

FIGURE 14. GATE TO SOURCE VOLTAGE vs GATE CHARGE

Typical Performance Curves Unless Otherwise Speciﬁed (Continued)

1.25

0.95

0.85

0.75

-40 0 40 80

TJ, JUNCTION TEMPERATURE (oC)

NORMALIZED DRAIN TO SOURCE

BREAKDOWN VOLTAGE

120 160

1.05

1.15

ID = 250µA

1000

200

00-20 -50

C, CAPACITANCE (pF)

600

VDS, DRAIN TO SOURCE VOLTAGE (V)

800

400

CISS = CGS + CGD

CRSS = CGD

COSS ≈ CDS + CGD

CISS

-10 -30 -40

COSS

CRSS

VGS = 0V, f = 1MHz

ID, DRAIN CURRENT (A)

gfs, TRANSCONDUCTANCE (S)

0 -4 -8 -12 -16

-20

TJ = 125oC

TJ = 25oC

TJ = -55oC

PULSE DURATION = 80µs

DUTY CYCLE = 0.5% MAX

-0.4 -1.0 -1.2 -1.6 -1.8-0.6

-0.1

-1.0

-10

ISD, DRAIN CURRENT (A)

VSD, SOURCE TO DRAIN VOLTAGE (V)

-100

-0.8 -1.4

TJ = 25oC

TJ = 150oC

PULSE DURATION = 80µs

DUTY CYCLE = 0.5% MAX

Qg(TOT), TOTAL GATE CHARGE (nC)

VGS, GATE TO SOURCE (V)

0 8 16 24 40

- 5

- 10

- 15

VDS = -80V

ID = -12A

VDS = -50V

VDS = -20V

IRF9530, RF1S9530SM

Test Circuits and Waveforms

FIGURE 15. UNCLAMPED ENERGY TEST CIRCUIT FIGURE 16. UNCLAMPED ENERGY WAVEFORMS

FIGURE 17. SWITCHING TIME TEST CIRCUIT FIGURE 18. RESISTIVE SWITCHING WAVEFORMS

FIGURE 19. GATE CHARGE TEST CIRCUIT FIGURE 20. GATE CHARGE WAVEFORMS

0.01Ω

IAS

VDS

VDD

DUT

VARY tP TO OBTAIN

REQUIRED PEAK IAS

VGS

VDD

VDS

BVDSS

IAS

tAV

VGS

DUT

VDD

td(ON)

90%

10%

VDS 90%

td(OFF)

tOFF

90%

50%

10%

PULSE WIDTH

VGS

tON

10%

0.3µF

12V

BATTERY 50kΩ

+VDS

DUT

IG(REF)

(ISOLATED

-VDS

0.2µF

CURRENT

REGULATOR

ID CURRENT

SAMPLING

IG CURRENT

SAMPLING

SUPPLY)

RESISTOR RESISTOR

DUT

Qg(TOT)

Qgd

Qgs

VDS

VGS

VDD

IG(REF)

IRF9530, RF1S9530SM

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is

not intended to be an exhaustive list of all such trademarks.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.

As used herein:

1. Life support devices or systems are devices or

systems which, (a) are intended for surgical implant into

the body, or (b) support or sustain life, or (c) whose

failure to perform when properly used in accordance

with instructions for use provided in the labeling, can be

reasonably expected to result in significant injury to the

user.

2. A critical component is any component of a life

support device or system whose failure to perform can

be reasonably expected to cause the failure of the life

support device or system, or to affect its safety or

effectiveness.

PRODUCT ST A TUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information

Preliminary

No Identification Needed

Obsolete

This datasheet contains the design specifications for

product development. Specifications may change in

any manner without notice.

This datasheet contains preliminary data, and

supplementary data will be published at a later date.

Fairchild Semiconductor reserves the right to make

changes at any time without notice in order to improve

design.

This datasheet contains final specifications. Fairchild

Semiconductor reserves the right to make changes at

any time without notice in order to improve design.

This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.

The datasheet is printed for reference information only.

Formative or

In Design

First Production

Full Production

Not In Production

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD

DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT

OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS P ATENT

RIGHTS, NOR THE RIGHTS OF OTHERS.

PACMAN™

POP™

PowerTrench

QFET™

QS™

QT Optoelectronics™

Quiet Series™

SILENT SWITCHER

SMART ST ART™

Star* Power™

Stealth™

FAST

FASTr™

GlobalOptoisolator™

GTO™

HiSeC™

ISOPLANAR™

LittleFET™

MicroFET™

MICROWIRE™

OPTOLOGIC™

OPTOPLANAR™

Rev. H



ACEx™

Bottomless™

CoolFET™

CROSSVOLT™

DenseTrench™

DOME™

EcoSPARK™

E2CMOSTM

EnSignaTM

FACT™

F ACT Quiet Series™

SuperSOT™-3

SuperSOT™-6

SuperSOT™-8

SyncFET™

TinyLogic™

UHC™

UltraFET™

VCX™

