HDLP Series High Density Low Profile Connectors * * * * * * * High density contact arrangement Light weight Low profile mated height Surface mount termination technology Miniature hyperboloid socket contacts Interfacial seal Polarized and scoop proof Pick and place compatible General Specifications Insulator Material Liquid crystal polymer (LCP) Contact Material Copper alloy Socket Wire Material Beryllium copper Interfacial Seal Material Fluorosilicone Guides Material Stainless steel Contact Plating ASTM-488-B (Type II, grade C, Class 1) Contact Resistance 8 milliohms max. Current Rating 2 Amps per contact Contact Life Cycles 2,000+ operations Extraction Forces 1.0 oz. Temperature Range -55 C to 125 C Voltage Rating 110 VDC or AC peak nomial Contact Diameter 0.015 [0.39] Current Rating The Hypertac(R) contact design and manufacturing tolerances endow the product with the following attributes: * Double the current rating of other contact designs of similar size * Low contact resistance in high current applications minimizes temperature rise thereby enabling higher density interconnects Contact Plating Finishes Connector Finish Ordering Code U Description Component Component Finish Ordering Code Conforms To Plating Thickness* Socket -/9 ASTM-488-B (Type II, Grade C, Class 1) 1.27 m gold plate min. 50 in gold plate min. Pin -/7 ASTM-488-B (Type II, Grade C, Class 1) 1.27 m gold plate min. 50 in gold plate min. Gold Plate * PLATING THICKNESS These values apply to mating surfaces. Dimensions are in inches [mm] www.hypertronics.com 3 / 21 HDLP Series HDLP Insulators Straight Male Straight Male Number of Contacts 30 58 90 118 Single Double Single Double Single Double Single Double Dimension A 0.657 [16.70] - 1.070 [27.20] - 1.543 [39.20] - 1.957 [49.70] - Dimension B 0.923 [23.45] - 1.337 [33.95] - 1.809 [45.95] - 2.222 [56.45] - Dimension C 0.090 [2.28] 0.270 [6.85] 0.090 [2.28] 0.270 [6.85] 0.090 [2.28] 0.270 [6.85] 0.090 [2.28] 0.270 [6.85] Dimension D 0.243 [6.18] 0.423 [10.75] 0.243 [6.18] 0.423 [10.75] 0.243 [6.18] 0.423 [10.75] 0.243 [6.18] 0.423 [10.75] Dimension E 0.795 [20.20] - 1.209 [30.70] - 1.681 [42.70] - 2.094 [53.20] - Dimensions are in inches [mm] 3 / 22 www.hypertronics.com HDLP Series HDLP Insulators Straight Female Straight Female Number of Contacts 30 58 90 118 Dimension A 0.657 [16.70] 1.070 [27.20] 1.543 [39.20] 1.957 [49.70] Dimension B 0.858 [21.80] 1.272 [32.30] 1.744 [44.30] 2.157 [54.80] Dimension E 0.795 [20.20] 1.209 [30.70] 1.681 [42.70] 2.094 [53.20] Dimensions are in inches [mm] www.hypertronics.com 3 / 23 HDLP Series HDLP Insulators 90 Male 90 Male Number of Contacts 30 58 90 118 Dimension A 0.657 [16.70] 1.070 [27.20] 1.543 [39.20] 1.957 [49.70] Dimension B 0.923 [23.45] 1.337 [33.95] 1.809 [45.95] 2.222 [56.45] Dimensions are in inches [mm] 3 / 24 www.hypertronics.com HDLP Series HDLP Contact Terminations Male SMT Female SMT Male 90 Printed Circuit Board Termination Style H J K Male Vertical Printed Circuit Board Termination Style C D E Dimension A 0.089 [2.26] 0.124 [3.16] 0.152 [3.86] Dimension A 0.089 [2.26] 0.124 [3.16] 0.152 [3.86] Female Vertical Printed Circuit Board Termination Style C D E Dimension A 0.089 [2.26] 0.124 [3.16] 0.152 [3.86] Dimensions are in inches [mm] www.hypertronics.com 3 / 25 HDLP Series HDLP Part Number Configurator HDLP Series HDLP Alignment Pips 1 = With 2 = Without Default is 2 if insulator style is 9 1 1 030 U F H AA 0P0 Standard Variations (Male and Female Printed Circuit Board Variants) 0P0 = Back potted terminations and fitted with interfacial seal (preferred) 0PX = Tinned and back potted and fitted with interfacial seal 0PC = Back potted, coated to conformity and fitted with interfacial seal NP0 = Back potted terminations (preferred) NPX = Tinned and back potted NPC =Back potted and coated to conformity Guide Hardware AA = No guide hardware B- = Locking socket C- = Not yet defined D- = Locking post E- = Not yet defined F- = Polarizing socket G- = Not yet defined H- = Polarizing Pin I- = Not yet defined J- = Connector to board fixing K- = Not yet defined L- = Guide socket M- = Not yet defined O- = Guide Pin P- = Not yet defined Q- = Polarized transverse mounting (Contact factory for more details) 1 = Single Insulator Height/Style 2 = Double 9 = 90 Default is 9 for 90 contact termination (90 female not currently available) Number of Contacts 030 = 30 058 = 58 090 = 90 118 = 118 Contact Plating U = Standard gold plating 50in gold plating over 50in nickel plating over 10in copper flash S = Gold plate with tin dipped terminations (PC tail only) Contact Gender M = Male F = Female Contact Termination C = Through board solder-Straight PC Tail - 2.26mm Long D = Through board solder-Straight PC Tail - 3.16mm Long E = Through board solder-Straight PC Tail - 3.86mm Long H = Through board solder- 90 PC Tails - 2.26mm Long J = Through board solder- 90 PC Tails - 3.16mm Long K = Through board solder- 90 PC Tails - 3.86mm Long Q = Surface Mount - Straight (Contact factory for more details) Dimensions are in inches [mm] 3 / 26 www.hypertronics.com