VPS-25-15 - V-Infinity



•

VPS-25-15 Open Frame Switching Power Supply

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258

DC output voltage 15V

Output V. tolerance ±2%

Output rated current 1.7A

Output current range 0-1.7A

Ripple & noise p-p 100m

Line regulation ±0.3%

Load regulation ±1%

DC output power 25.5W

Efficiency 78%

DC voltage adj. ---

Input voltage range 85~264VAC 47~63Hz; 120-370VDC

AC current 0.65A/115V 0.4A/230V

Inrush current cold start 40A

Leakage current <0.5mA/240VAC

Overload protection above 105%

type: Hiccup mode, recovers automatically after fault condition is removed

Over voltage protection 115%~135%

Over temp. protection U1 Tj 135°C typical power shutdown

Temperature coefficient ±0.03% / °C (0~50°C)

Set up, rise, hold up time 200ms, 30ms, 17ms/115VAC 200ms, 20ms, 80ms/230VAC

Vibration 10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes

Withstand voltage I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min.

Isolation resistance I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min.

Working temp., humidity -10°C~+60% (refer to output derating curve), 20%-90% RH

Storage temp., humidity -20°C~+85°C, 10%-95% RH

Dimensions 4.21x2.4x1.1 inches (107x61x28 mm)

Weight 0.31 lbs (0.14 Kg)

Safety standards UL1950, TUV EN60950 approved

EMC standards CISPR22 (EN55022), IEC1000-4,2,3,4,5 IEC1000-3-2 verification

Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient

2. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

3. Line regulation is measured from low line to high line at rated load

V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus

tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus

tomer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub

lished specifications. Nothing will be covered outside of standard product warranty.

Features

·Universal AC input / Full range

·Low leakage current <0.5mA

·Protections:Short circuit/Over load/Over

voltage/Over temperature

·Cooling by free air convection

·100% full load burn-in test

·Fixed switching frequency at 100KHz

·Low cost

·High reliabilt\ity

·2 year warranty