C-Clip Connector Pulse Part Number W9908 Ideal for board-to-antenna applications Spring contact for positive connection Surface mount technology; solder reflowable Features - PWB Footprint 3.2 x 1.7 mm - Nominal Contact Height 1 mm - Tape & Reel Packaging - RoHS Compliant Product Applications - Antenna Contacts San Diego, CA 858 674 8100 Vancouver, WA 360 944 7551 1 Europe 49 7032 7806 0 Asia 86 755 33966678 pulseelectronics.com/products/antennas North Asia 886 3 4356768 China 86 512 6807 9998 L163.B (12/14) C-Clip Connector Pulse Part Number W9908 W9908 C-Clip Configuration and Dimensions PWB Footprint Dimensions and C-Clip Position for W9908 PWB Layouts Ground Clearance Area for W9908 C-Clip 2 pulseelectronics.com/products/antennas L163.B (12/14) C-Clip Connector Pulse Part Number W9908 3 pulseelectronics.com/products/antennas L163.B (12/14) C-Clip Connector Pulse Part Number W9908 4 pulseelectronics.com/products/antennas L163.B (12/14) C-Clip Connector Pulse Part Number W9908 W9908 Connector Soldering Recommendation for reflow soldering process Printing stencil thickness 0.15 to 0.25 mm is recommended for the solder paste. The maximum soldering temperature should not exceed 260C. The temperature profile recommendations for reflow solder process are presented in Figure 1 and 2. The reflow profile presented in Figure 2 describes maximum reflow temperatures. Figure 1 - Minimum temperature profile recommendation for reflow soldering process 5 pulseelectronics.com/products/antennas L163.B (12/14) C-Clip Connector Pulse Part Number W9908 Figure 2 - Maximum temperature profile recommendation for reflow soldering process 6 pulseelectronics.com/products/antennas L163.B (12/14)