ATF1502SE-10AC44 - Atmel Corporation

Features

•2nd Generation EE PROM-based Complex Programmable Logic Devices

–V

CCIO of 5.0V or 3.3V with 3.3V Operation being 5V Tolerant

– 32 - 256 Macrocells with Enhanced Features

– Pin-compatible with Industry Standard Devices

– Speeds to 5 ns Maximum Pin-to-pin Delay

– Registered Operation to 250 MHz

•Enhanced Macrocells with Logic Doubling™Features

–BuryEitherRegisterorCOMwhileUsingtheOtherforOutput

– Dual Independent Feedback Allows Multiple Latch Functions per Macrocell

– 5 Product Terms per Macrocell, expandable to 40 per Macrocell with Cascade

Logic, Plus 15 more with Foldback Logic

– D/T/Latch Configurable Flip-flops plus Transparent Latches

– Global and/or per Macrocell Register Control Signals

– Global and/or per Macrocell Output Enable

– Programmable Output Slew Rate per Macrocell

– Programmable Output Open Collector Option per Macrocell

– Fast Registered Input from Product Term

•Enhanced Connectivity

– Single Level Switch Matrix for Maximum Routing Options

– Up to 40 Inputs per Logic Block

•Advanced Power Management Features

– ITD (Input Transition Detection) Available Individually on Global Clocks, Inputs and

I/O for µA Level Standby Current for “L” Versions

– Pin-controlled 1 mA Standby Mode

– Reduced-power Option per Macrocell

– Automatic Power Down of Unused Macrocells

– Programmable Pin-keeper Inputs and I/Os

•Available in Commercial and Industrial Temperature Ranges

•Available in All Popular Packages Including PLCC, PQFP and TQFP

•EE PROM Technology

– 100% Tested

– Completely Reprogrammable

– 10,000 Program/Erase Cycles

– 20 Year Data Retention

– 2000V ESD Protection

– 200 mA Latch-up Immunity

•JTAG Boundary-scan Testing Port per IEEE 1149.1-1990 and 1149.1a-1993

– Pull-up Option on JTAG Pins TMS and TDI

•IEEE 1532 Compatibility for Fast In-System Programmability (ISP) via JTAG

•PCI-compliant

•Security Fuse Feature

ATF15xxSE

Family

Datasheet

ATF1502SE(L)

ATF1504SE(L)

ATF1508SE(L)

ATF1516SE(L)

Preliminary

Rev. 2401D–PLD–09/02

2ATF15xxSE Family 2401D–PLD–09/02

General

Description Beginning with the introduction of the 100% connected ATF1500 with 32 enhanced macrocells

in 1996, Atmel’s CPLD products have delivered extra IO connectivity and logic reusability.

Atmel’s commitment to efficient, flexible architecture has continued with the current Atmel

ATF15xxSE Family of industry-standard, pin-compatible CPLDs. Atmel’s Logic Doubling

architecture consists of wider fan-in, additional routing and clock options, combined with

sophisticated, proprietary device fitters, extend CPLD place and route efficiency. Atmel

enhanced macrocell includes double independent buried feedback that allows designers to

pack more logic (particularly shifters and latches) into a smaller CPLD or leave spare room for

later revisions. The Atmel ATF15xxSE family delivers enhanced functionality and flexibility

with no additional design effort and is highly cost effective.

The Atmel ATF15xxSE Family includes all popular configurations and speeds.

The Atmel ATF15xxSE Family includes pin-compatible products in all popular packages.

Notes: 1. Contact Atmel for up-to-date information on device and package availability.

2. When the JTAG port is used for In System Programming (ISP) or Boundary-scan Testing

(BST), the four associated pins become JTAG pins and are unavailable for user I/O.

Table 1. ATF15xxSE Family Device Features

Feature ATF1502SE(L) ATF1504SE(L) ATF1508SE(L) ATF1516SE(L)

Usable Gates 750 1500 3000 6000

Macrocells 32 64 128 256

Logic Blocks 2 4 8 16

Max. # Pins 44 100 256 256

Max. User I/Os 36 68 100 164

TPD Grades (ns) 5, 6, 7, 10(15) 5, 6, 7, 10(15) 6, 7, 10(15) 7, 10(15)

Table 2. ATF15xxSE Family Device Packages and Number of Signal Pins(1)(2)

Packages ATF1502SE(L) ATF1504SE(L) ATF1508SE(L) ATF1516SE(L)

44-pin PLCC 36 36

44-pin TQFP 36 36

84-pin PLCC 68 68

100-pin TQFP 68 84

100-pin PQFP 84

160-pin PQFP 100

208-pin PQFP 164

208-pin RQFP 164

ATF15xxSE Family

2401D–PLD–09/02

Functional

Description The ATF15xxSE Family of 5.0 Volt supply, high-performance, high-density complex program-

mable logic devices (CPLDs) utilizes Atmel’s proven electrically erasable non-volatile

technology. With up to 512 macrocells, they easily integrate logic from several TTL, SSI, MSI,

LSI and classic PLDs. The ATF15xxSE Family’s enhanced macrocell architecture, switch

matrices and routing increase usable gate count for new designs and increase odds of suc-

cessful pin-locked design modifications while maintaining pin-compatibility with industry

standard CPLDs.

The ATF15xxSE Family devices have four dedicated input pins and depending on the type of

device and package, up to 208 bi-directional I/O pins. Each dedicated input pin can also serve

as a global control signal, register clock, register reset or output enable. Each of these control

signals can be selected for use individually within each macrocell. Each input and I/O pin also

feeds into the global bus.

The macrocells are organized into groups of sixteen called logic blocks. The switch matrix in

each logic block selects 40 individual signals from the global bus. Macrocells within a given

logic block may share their sixteen foldback signals on a regional foldback bus. Cascade logic

between macrocells in the Logic Block allows fast, efficient generation of complex logic func-

tions. All macrocells are capable of being I/Os, however, the actual number of I/O pins

depends on the device and package type. The ATF15xxSE Family members contain two, four,

eight, sixteen or thirty-two such logic blocks, each capable of creating sum term logic with a

fan-in of 40 inputs from the switch matrix having access to up to 80 product terms.

Unused macrocells are automatically disabled by the fitter software to decrease power con-

sumption. A security fuse, when programmed, protects the contents of the other fuses. Two

bytes (16 bits) of User Signature are accessible to the user for purposes such as storing

project name, part number, revision or date. The User Signature is accessible regardless of

the state of the security fuse.

The ATF15xxSE Family devices are in-system programmable (ISP) devices. They use the

industry-standard 4-pin JTAG interface (IEEE Std. 1149.1), and are fully-compliant with

JTAG’s Boundary-scan Description Language (BSDL). ISP allows the device to be pro-

grammed without removing it from the printed circuit board. In addition to simplifying the

manufacturing flow, ISP also allows design modifications to be made in the field via software.

Global Bus/Switch

Matrix The global bus (Figure 1) contains all input and I/O pin signals as well as the buried feedback

signals from all macrocells. The switch matrix in each logic block receives as its inputs all sig-

nals from the global bus. Up to 40 of these signals can be selected as inputs to the individual

logic blocks by the fitter software. Atmel’s ATF15xx Family of CPLDs use a single level switch

matrix signal distribution structure, where each logic block input has access to the same num-

ber of global bus inputs, maximizing the number of possible ways to route a global bus signal.

This single level structure is in contrast with split switch matrix structures used by others in

which routing a particular global bus input to a particular logic block input makes that signal

unavailable to some other logic blocks, thus greatly limiting the available opportunities to

route.

The ATF15xxSE Family macrocell, shown in Figure 2, consists of five sections: product terms

and product term select multiplexer, OR/XOR/CASCADE logic, foldback bus, a flip-flop and

output buffer. Extra fan-in and signal routing are provided throughout. Each macrocell can

generate a foldback logic term from the product term mux and a buried feedback with extra

routing that go to the global bus.

4ATF15xxSE Family 2401D–PLD–09/02

Figure 1. ATF15xxSE Family Typical Block Diagram

6to16

N-1

6to16

ATF15xxSE Family

2401D–PLD–09/02

Figure 2. ATF15xxSE Family Macrocell with Enhanced Features In Red

ProductTermsand

Select Mux Within each macrocell are five product terms. Each product term may receive as its inputs any

combination of the signals from the switch matrix or regional foldback bus. The product term

select multiplexer (PTMUX) allocates the five product terms as needed to the macrocell logic

gates and control signals. The PTMUX programming is determined by the fitter software,

which selects the optimum macrocell configuration.

OR/XOR/

CASCADE Logic Withinasinglemacrocell,alltheproducttermscanberoutedtotheORgate,creatinga5-

input AND/OR sum term. With the addition of the CASIN from neighboring macrocells, this can

be expanded to as many as 40 product terms with little additional delay.

The macrocell’s XOR gate allows efficient implementation of compare and arithmetic func-

tions. One input to the XOR comes from the OR sum term. The other XOR input can be a

product term or a fixed high- or low-level. For combinatorial outputs, the fixed level input

allows polarity selection. For registered functions, the fixed levels allow DeMorgan minimiza-

tion of product terms. The XOR gate may be fed from the flip-flop output to emulate T- and JK-

type flip-flops, or fed to the buried feedback to synthesize an extra latch.

Foldback Bus Each macrocell can also generate a foldback product term. This signal goes to the regional

bus and is available to the 16 macrocells in a given logic block. The foldback is an inverse

polarity of one of the macrocell’s product terms. Although Cascade Logic is the preferred

method for expanding the number of macrocell inputs to as many as 40, the 16 foldback terms

in each region can also generate additional fan-in sum terms with nominal additional delay.

REGIONAL

FOLDBACK

BUS

LOGIC

FOLDBACK

I/O Pin

GCK[0:2]

GCLEAR

CASOUT

D/T*/L

AP Q

CASIN

I/O Pin

SLEW

RATE

OPEN

COLLECTOR

GOE[0:5]

Reduced Power Option

SWITCH

MATRIX

GLOBAL BUS

ProductTermMUX

PT1

PT2

PT3

PT5

PT4

SWITCH

MATRIX

OUTPUTS

* T flip-flop synthesised

CK/CK/LE

GOE 

SWITCH

MATRIX

GOE [0:5]

6ATF15xxSE Family 2401D–PLD–09/02

Flip-flop The ATF15xxSE Family’s flip-flop has very flexible data and control functions. The data input

can come from either the XOR gate, from a separate product term or directly from the I/O pin.

Selecting the separate product term allows creation of a buried registered feedback within a

combinatorial output or vice-versa. (This enhanced function is automatically implemented by

the fitter software). The flip-flop can be configured for D, T, JK and SR operation, and changes

state on the clock’s rising edge. It can also be configured as a flow-through latch. In this mode,

data passes through when the clock is high and is latched when the clock is low.

When a GCK signal is used as the clock, one of the macrocell product terms can be selected

as a clock enable. When the clock enable function is active and the enable signal (product

term) is low, all clock edges are ignored. The flip-flop has asynchronous reset and preset. The

flip-flop’s asynchronous reset signal (AR) can be either the Global Clear (GCLEAR), a product

term, or always off. AR can also be a logic OR of GCLEAR with a product term. The asynchro-

nous preset (AP) can be a product term or always off.

Extra Feedback The ATF15xxSE Family macrocell output can be selected as registered or combinatorial. The

extra buried feedback signal can be either combinatorial or registered signal regardless of

whether the output is combinatorial or registered. (This enhanced function is automatically

implemented by the fitter software) Feedback of a buried combinatorial output allows the cre-

ation of a second latch within a macrocell.

I/O Control The output enable multiplexer (MOE) controls the output enable signal. Each I/O can be indi-

vidually configured as an input, output or for bi-directional operation. The output enable for

each macrocell can be selected from the true or compliment of the two output enable pins, a

subset of the I/O pins, or a subset of the I/O macrocells. This selection is automatically done

by the fitter software when the I/O is configured as an input, all macrocell resources are still

available, including the buried feedback, expander and cascade logic.

The buffer has a fast/slow slew rate option to control EMI and an open-collector option which

enables the device to provide control signals such as an interrupt that can be asserted by any

of the several devices.

Programmable

Pin-keeper Option

for Inputs and I/Os

The ATF15xxSE Family offers the option of programming all input and I/O pins with pin-keeper

circuits enabled. When any pin is driven high or low and then subsequently left floating, the pin

keeper circuit will hold it at that previous high or low-level. This circuitry prevents unused input

and I/O lines from floating to intermediate voltage levels, which causes unnecessary power

consumption and system noise. The pin-keeper circuits eliminate the need for external pull-up

resistors and eliminate their DC power consumption.

ATF15xxSE Family

2401D–PLD–09/02

Input Diagram

I/O Diagram

Speed/Power

Management The ATF15xxSE Family has several speed and power management features.

Multiple Power

Supplies, Power

Sequencing and

Hot-Socketing

Because the ATF15xxSE Family can be used in a system with mixture of power supplies, it

has been designed to function with the VCCINT and VCCIO power supplies applied in any

sequence. Also, until the power up sequence completes, the input/output buffers are kept in a

high impedance state, and so may be driven but do not drive power out.

PROGRAMMABLE

OPTION (PIN KEEPER)

PROGRAMMABLE

OPTION (PIN KEEPER)

8ATF15xxSE Family 2401D–PLD–09/02

Power-on Reset The ATF15xx Family devices are designed with a power-on reset, a feature critical for state

machine initialization. At a point delayed slightly from VCC crossing VRST, all registers will be

initialized, and the state of each output will depend on the polarity of its buffer. However, due

to the asynchronous nature of reset and uncertainty of how VCC actually rises in the system,

the following conditions are required:

1. The VCC rise must be monotonic,

2. After reset occurs, all input and feedback setup times must be met before driving the

clock pin high, and,

3. The clock must remain stable during TD.

The ATF15xx Family has two options for the hysteresis about the reset level, VRST,Smalland

Large. In applications where the supply voltage may drop below 4.0V, Atmel recommends that

during the fitting process users configure the device with the Power-on Reset hysteresis set to

Large to ensure a robust operating environment.

Power Down of

Unused

Macrocells

To conserve power, Atmel fitters automatically power down all unused macrocells.

Input Transition

Detection/

Automatic Power

Down

The ATF15xxSEL versions provide automatic power-down to µA level stand-by power (the “L”

suffix indicates “Low” power) through Atmel’s patented Input Transition Detection (ITD) cir-

cuitry on Global Clocks, Inputs and I/O. These ITD circuits automatically put the device into a

low-power standby mode when no logic transitions are occurring. This reduces power con-

sumption during inactive periods, and so provides proportional power savings for most

applications running at system speeds below fCRITICAL (~5 MHz).

In clocked applications, where the device is operated at a frequency high enough to keep the

device from going into stand-by (above fCRITICAL), the device will perform at the faster speeds

given in the next faster speed column. These higher speeds can be achieved in combinatorial

designs as well, as long as once activated by an initial input transition, the device continues to

receive input transitions often enough to keep the device from going into standby mode again.

That is, the time between input transitions is less than 1/fCRITICAL.

Reduced-Power

per Macrocell To further reduce power, each ATF15xxSE Family macrocell has a reduced-power bit feature.

With this feature the designer can reduce power by 50% or more for logic that does not need

to operate at the maximum switching speed. The reduced-power bit may be activated by

changing the default OFF to ON for any or all macrocells. For macrocells in reduced-power

mode (reduced-power bit turned on), the reduced- power adder, tRPA, must be added to the

AC parameters, which include the data paths tLAD,t

LAC,t

IC,t

ACL,t

ACH and tSEXP. All power-down

AC characteristic parameters are computed from external input or I/O pins, with the reduced-

power bit turned on.

Slew Rate Control Each output also has individual slew rate control. This may be used to reduce system noise by

slowing down outputs that do not need to operate at maximum speed. Outputs default to slow

switching. The slew rate option is selected in the design source file.

Pin Controlled

Power-down All ATF15xx Family devices also have an optional pin-controlled power-down mode. When

activated, one or both of two pins, PD1 and PD2, can act as power-down pins. The device

goes into power-down when either PD1 or PD2 pins (or both) are high, and the device supply

current is reduced to less than 1 mA. Also, all internal logic signals are latched and held, as

are any enabled outputs. Therefore, all registered and combinatorial output data remain valid.

Any outputs that were in a high-Z state at the onset will remain at high-Z. Input and I/O hold

ATF15xxSE Family

2401D–PLD–09/02

latches remain active to ensure that pins do not float to indeterminate levels, further reducing

system power. All pin transitions are ignored until the PD pin is brought low. When the power-

down feature is enabled for PD1 or PD2, that pin cannot be used as a logic input or output.

However, the pin’s macrocell may still be used to generate buried foldback and cascade logic

signals. The power-down option is selected in the design source file.

Power

Consumption

Estimates

An estimate of power consumption can be made based on typical designs and operation con-

ditions, but because it is sensitive to these factors, power consumption must be verified with

actual pattern and operation conditions. The equations given below are based on a pattern of

16-bit up/down counters in each logic block and may be used to estimate power consumption

for both operating modes.

Standby Power 1. Pstandby =I

ccstandby xV

supply

Where:

Iccstandby = the standby current given for the particular device and standby mode (e.g. pin con-

trolled Power Down)

Vsupply= the power supply voltage

Active Power 2. Pactive =P

internal +P

load =I

ccinternal xV

supply +P

load

Where:

Iccinternal = the internal current estimated from equation 3 below

Vsupply= the power supply voltage

Pload = depends on the device output load capacitance and switching frequency on each out-

put pin.

Pload and additional power savings at low frequencies using Atmel Input Transition Detection

(“L” versions) can be estimated according to the methods discussed in the Atmel Application

Note “Saving Power with Atmel PLDs”

3. Iccinternal =[K

1x(MC

inuse – MCreducedpower )] + (K2xMC

reducedpower)+(K

3xMC

inuse xf

op x

NS)

Where:

MCreducedpower = the number of macrocells operating at reduced power (from fitter report file)

MCinuse= the number of macrocells in use (from fitter report file. Unused macrocells are pow-

ered down.)

NS = the proportion of logic nodes switching (typically 10-20%)

fop = the switching frequency

K1,K

2,and K3= device constants given in the table below.

Note: Shaded data is preliminary and subject to change without notice.

Device K1(mA/MC) K2(mA/MC) K3(mA/MC · MHz)

ATF1502SE 0.6 0.3 0.015

ATF1504SE 0.6 0.3 0.015

ATF1508SE 0.6 0.3 0.015

ATF1516SE 0.6 0.3 0.015

10 ATF15xxSE Family 2401D–PLD–09/02

Design

Software Atmel ATF15xxSE Family fitters allow logic synthesis using a variety of high-level description

languages and formats. ATF15xxSE Family designs are supported by Atmel specific design

tools as well as by several third-party tools. Free conversion software is also offered for indus-

try standard devices. Check the Atmel web site or contact your authorized Atmel sales

representative for up-to-date design software information.

Programming ATF15xxSE Family devices can be programmed using standard third-party programmers.

With third-party programmers, the JTAG ISP port can be disabled thereby allowing four addi-

tional I/O pins to be used for logic. Check the Atmel web site, contact your authorized Atmel

sales representative or Atmel PLD Applications for details of third-party programmers.

ATF15xxSE Family devices are in-system programmable (ISP) devices utilizing the 4-pin

JTAG protocol. This capability eliminates package handling normally required for program-

ming and facilitates rapid design iterations and field changes. Atmel provides ISP hardware

and software to allow programming of the ATF15xxSE Family via the PC. ISP is performed by

using either a download cable, a compatible board tester or a simple microprocessor interface.

It is most common to devote the JTAG pins to ISP, but it is possible to use ISP to program the

part through the JTAG pins, and set these four pins I/O pins. However, this will effectively dis-

able further ISP and the device will need to be erased on a programmer to re-enable ISP.

Contact Atmel PLD Applications by email at pld@atmel.com or call our Hotline at (408) 436-

4333 for details.

To allow ISP programming support by the Automated Test Equipment (ATE) vendors, Serial

Vector Format (SVF) files can be created by the Atmel ISP software. Conversion to other ATE

tester formats is also possible. Check the Atmel web site for up-to-date programming and soft-

ware support information.

ISP

Programming

Protection

The ATF15xxSE Family also incorporates a protection feature that locks the device and pre-

vents the inputs and I/O from driving if the programming process is interrupted for any reason.

The inputs and I/O default to high-Z state during such a condition. In addition the pin-keeper

option preserves the former state during device programming.

All ATF15xxSE Family devices are initially shipped in the erased state thereby making them

ready to use for ISP.

For more information refer to the “Designing for In-System Programmability with Atmel

CPLDs” application note.

Security Fuse

Usage A single fuse is provided to prevent unauthorized copying of the ATF15xxSE Family fuse pat-

terns. Once programmed, fuse verify is inhibited. However, the User Signature and device ID

remain accessible.

ATF15xxSE Family

2401D–PLD–09/02

JTAG-BST

Overview The JTAG-BST (JTAG boundary-scan testing) is controlled by the Test Access Port (TAP)

controller. The boundary-scan technique involves the inclusion of a shift-register stage (con-

tained in a boundary-scan cell) adjacent to each component so that signals at component

boundaries can be controlled and observed using scan testing principles. Each input pin and

I/O pin has its own Boundary-scan Cell (BSC) in order to support boundary-scan testing. The

ATF15xxSE Family does not currently include a Test Reset (TRST) input pin because the TAP

controller is automatically reset at power-up. The ATF15xxSE Family implements six BST

instructions, and seven Atmel-defined In System Programming (ISP) instructions. All ATF15xx

Family BST and ISP instructions have a length of 10 bits.

The ATF15xxSE Family BST implementation complies with the Boundary-scan Definition Lan-

guage (BSDL) described in the JTAG specification (IEEE Standard 1149.1). Any third-party

tool that supports the BSDL format can be used to perform BST on the ATF15xxSE Family.

The ATF15xxSE Family also has the option of using four JTAG-standard I/O pins for in-system

programming (ISP). The ATF15xxSE Family is programmable through the four JTAG pins

using programming-compatible with the IEEE JTAG Standard 1149.1. Programming is per-

formed by using 5V TTL-level programming signals from the JTAG ISP interface. The JTAG

feature is a programmable option. If JTAG (BST or ISP) is not needed, then the four JTAG

control pins are available as I/O pins. Refer to Atmel Application Note “Designing for In-Sys-

tem Programmability with Atmel CPLDs for more details.

JTAG BST Instructions Description

SAMPLE/PRELOAD Captures signals at the device pins for later examination,

or loads a data pattern prior to an EXTEST instruction.

EXTEST Allows testing of off-chip circuitry and interconnections

by forcing a pattern on the output pins or capturing

signals from the input pins.

BYPASS Places a single shift register stage between TDI and

TDO, allowing test BST data to pass through a particular

device in a chain of devices.

IDCODE Places the 32-bit IDCODE register between TDI and

TDO, allowing the IDCODE data to be shifted out of

TDO.

UESCODE Places the 16-bit user electronic signature register

between TDI and TDO, allowing the UESCODE data to

be shifted out of TDO.

HIGHZ Places the BYPASS register between TDI and TDO in a

high impedance mode, protecting the device from

damage from externally applied test signals.

7 ISP instructions These seven instructions allow in-system programming

via the four JTAG pins.

12 ATF15xxSE Family 2401D–PLD–09/02

JTAG

Boundary-scan

Cell (BSC)

Testing

The ATF15xxSE Family has four dedicated input pins and a number of I/O pins depending on

the device type and package type selected. Each input pin and I/O pin has a boundary-scan

cell (BSC) which supports boundary-scan testing as described in detail by IEEE Standard

1149.1. A typical BSC consists of three capture registers or scan registers and up to two

update registers. There are two types of BSCs, one for input or I/O pin, and one for the macro-

cells. The BSCs in the device are chained together through the (BST) capture registers. Input

to the capture register chain is fed in from the TDI pin while the output is directed to the TDO

pin. Capture registers are used to capture active device data signals, to shift data in and out of

the device and to load data into the update registers. Control signals are generated internally

by the JTAG TAP controller.

Note: Shaded data is preliminary and subject to change without notice.

Boundary-scan

Definition

Language

(BSDL) Models

These are now available in all package types via the Atmel web site. These models conform to

the IEEE 1149.1 standard and can be used for Boundary-scan Test Operation of the

ATF15xxSE Family.

The BSC configuration for the input and I/O pins and macrocells are shown on page 13.

Device Boundary-Scan

MSB LSB

ATF1502SE 96 0000,0001,0101,0100,0010,0000,0011,1111

ATF1504SE 192 0000,0001,0101,0100,0100,0000,0011,1111

ATF1508SE 352 0000,0001,0101,0100,1000,0000,0011,1111

ATF1516SE 672 0000,0001,0101,0101,0000,0000,0011,1111

ATF15xxSE Family

2401D–PLD–09/02

BSC

Configuration

for Pins (Except

JTAG TAP Pins)

BSC

Configuration

for Macrocell

DQ DQ

Capture

DQ DQ

TDI

OUTJ

OEJ

Shift Clock

Mode

TDO

Macrocell BSC

14 ATF15xxSE Family 2401D–PLD–09/02

PCI Compliance The ATF15xx Family also supports peripheral component interconnect (PCI) interface stan-

dard in PCI-based designs and specifications. The PCI interface calls for high current drivers,

which are much larger than the traditional TTL drivers.

PCI Voltage-to-

Current Curves for

+5V Signaling in

Pull-up Mode

PCI Voltage-to-

Current Curves for

+5V Signaling in

Pull-down Mode

2.4

VCC

1.4

-2 -44 -178

Current (mA)

AC drive

point

drive point

Voltage

Pull Up

Test Point

2.2

VCC

0.55

3,6 95 380

Current (mA)

AC drive

point

drive point

Voltage

Pull Down

Test Point

ATF15xxSE Family

2401D–PLD–09/02

PCI DC Characteristics

Note: Leakage current is without pin-keeper off.

PCI AC Characteristics

Notes: 1. Equation A: IOH =11.9(V

OUT - 5.25) * (VOUT + 2.45) for VCC >V

OUT >3.1V.

2. Equation B: IOL = 78.5 * VOUT *(4.4-V

OUT)for0V<V

OUT < 0.71V.

Symbol Parameter Conditions Min Max Units

VCC Supply Voltage 4.75 5.25 V

VIH Input High Voltage 2.0 VCC +0.5 V

VIL Input Low Voltage -0.5 0.8 V

IIH Input High Leakage Current VIN =2.7V 70 µA

IIL Input Low Leakage Current VIN = 0.5V -70 µA

VOH Output High Voltage IOUT =-2mA 2.4 V

VOL Output Low Voltage IOUT =3mA,6mA 0.55 V

CIN Input Pin Capacitance 10 pF

CCLK CLK Pin Capacitance 12 pF

CIDSEL IDSEL Pin Capacitance 8pF

LPIN Pin Inductance 20 nH

Symbol Parameter Conditions Min Max Units

IOH(AC) Switching 0 < VOUT ≤1.4 -44 mA

Current High 1.4 < VOUT < 2.4 -44+(VOUT - 1.4)/0.024 mA

3.1 < VOUT <V

CC Equation A mA

(Test High) VOUT =3.1V -142 µA

IOL(AC) Switching VOUT > 2.2V 95 mA

Current Low 2.2 > VOUT >0 V

OUT/0.023 mA

0.1 > VOUT > 0 Equation B mA

(Test Point) VOUT = 0.71 206 mA

ICL Low Clamp Current -5 < VIN ≤-1 -25+(VIN +1)/0.015 mA

SLEWROutput Rise Slew Rate 0.4V to 2.4V load 0.5 3.0 V/ns

SLEWFOutput Fall Slew Rate 2.4V to 0.4V load 0.5 3.0 V/ns

16 ATF15xxSE Family 2401D–PLD–09/02

Note: 1. Junction temperature is package and device dependant and can be calculated as follows: TJ(MAX) =T

A(MAX) +(θJA|Air Flow =

0*P(MAX)). For more information see “Thermal Characteristics of Atmel Packages.”

Absolute Maximum Ratings*

Ambient Temperature Under Bias.................. -65°C to +135°C *NOTICE: Stresses beyond those listed under “Absolute

Maximum Ratings” may cause permanent dam-

age to the device. This is a stress rating only and

functional operation of the device at these or any

other conditions beyond those indicated in the

operational sections of this specification is not

implied. Exposure to absolute maximum rating

conditions for extended periods may affectdevice

reliability.

Note: 1. For currents less than 100 mA, minimum voltage

is -0.6 VDC and maximum voltage is VCC +

0.75 VDC. Pulses of less than 20µs may under-

shoot to -2.0V or overshoot to 7.0V.

Storage Temperature..................................... -65°C to +150°C

Junction Temperature ..............................................150°C(MAX)

Voltage on Any Pin with

Respect to Ground .........................................-2.0V to +7.0V(1)

Voltage on Input Pins

with Respect to Ground

During Programming.....................................-2.0V to +14.0V(1)

Programming Voltage with

Respect to Ground .......................................-2.0V to +14.0V(1)

DC Output Current per Pin ................................-25 to +25 mA

DC and AC Operating Conditions

Commercial Industrial

Operating Temperature (Ambient), TA0°C - 70°C -40°C - 85°C

Junction Temperature, TJ(1) ––

VCCINT (5.0V) Power Supply 5V ± 5% 5V ± 10%

VCCIO (5.0V) Power Supply 5V ± 5% 5V ± 10%

VCCIO (3.3V) Power Supply 3.0 - 3.6 3.0 - 3.6

VIInput Voltage -0.5 - VCCINT +.5 -0.5-V

CCINT +.5

VOOutput Voltage 0 - VCCIO 0-V

CCIO

tR40 ns Max 40 ns Max

tF40 ns Max 40 ns Max

ATF15xxSE Family

2401D–PLD–09/02

Notes: 1. Not more than one output at a time should be shorted. Duration of short circuit test should not exceed 30 sec.

2. ICC3 refers to the current in the reduced-power mode when macrocell reduced-power is turned ON.

3. See characteristic curves for each device.

Notes: 1. For slow slew outputs, add tSSO.

2. Pin or product term.

DC Characteristics(1) ATFxxSE Family

Symbol Parameter Condition Min Typ Min Unit

IIL Input or I/O Low Leakage Current VIN =V

CC -2 -10 µA

IIH Input or I/O High Leakage Current 2 10 µA

IOZ Tri-State Output Off-State Current VO=V

CC or GND -40 40 µA

ICC1 Power Supply Current, Standby VCC =Max

VIN =0,V

Std Mode Com. (3) mA

Ind. (3) mA

“ITD”

Mode Com. 1 mA

Ind. 1 mA

ICC2 Power Supply Current,

Power-down Mode VCC =Max

VIN =0,V

PD Mode 0.1 1 mA

ICC3(2) Reduced-power Mode Supply

Current, Standby VCC =Max

VIN =0,V

Std Mode Com. (3) mA

Ind. (3) mA

VIL Input Low Voltage -0.3 0.8 V

VIH Input High Voltage 2.0 VCCINT

+0.5 V

VOL 5.0V Output Low Voltage (TTL) IOL =12mA,V

CCIO = 4.75V 0.45 V

3.3V Output Low Voltage (TTL) IOL =12mA,V

CCIO =3.0V 0.45 V

3.3V Output Low Voltage (CMOS) IOL =0.1mA,V

CCIO =3.0V 0.2 V

VOH 5.0V Output High Voltage (TTL) IOH =-4mA,V

CCIO = 4.75V 2.4 V

3.3V Output High Voltage (TTL) IOH =-4mA,V

CCIO = 3.0V 2.4 V

3.3V Output High Voltage (CMOS) IOH =-0.1mA,V

CCIO =3.0V V

CCIO –0.2 V

Power-down AC Characteristics(1) ATFxxSE Family

Symbol Parameter

-5 -6 -7 -10 -15

UnitMin Max Min Max Min Max Min Max Min Max

tIVDH Valid 1, I/O before PD High 5.0 6.0 7.0 10 15 ns

tGVDH Valid 1, OE(2) before PD High 5.0 6.0 7.0 10 15 ns

tCVDH Valid 1, Clock(2) before PD High 5.0 6.0 7.0 10 15 ns

tDHIX I, I/O Don’t Care after PD High 9.0 10.0 12 15.0 25 ns

tDHGX OE(2) Don’t Care after PD High 9.0 10.0 12 15.0 25 ns

tDHCX Clock(2) Don’t Care after PD High 9.0 10.0 12 15.0 25 ns

tDLIV PD Low to Valid I, I/O 1.0 1.0 1.0 1.0 1.0 µs

tDLGV PD Low to Valid OE, (Pin or Term) 1.0 1.0 1.0 1.0 1.0 µs

tDLCV PD Low to Valid Clock, (Pin or Term) 1.0 1.0 1.0 1.0 1.0 µs

tDLOV PD Low to Valid Output 1.0 1.0 1.0 1.0 1.0 µs

18 ATF15xxSE Family 2401D–PLD–09/02

Timing Model

Note: 1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested. The OGI pin (high-voltage

pin during programming) has a maximum capacitance of 12 pF.

Input Test

Waveforms and

Measurement

Levels

Output AC Test

Loads

Pin Capacitance

Typ(1) Max Units Condition

CIN 810pFV

IN =0V;f=1.0MHz

CI/O 810pFV

OUT =0V;f=1.0MHz

(3.3V)

464

250

(703 )

(8060 )

5.0V

C=C

ATF1502SE

2401D–PLD–09/02

AC Characteristics(1) ATF1502SE(L)

Symbol Parameter

SE -5 SE -6 SE -7 SE -10 SEL -15(6)

UnitMin Max Min Max Min Max Min Max Min Max

tPD1 Input or Feedback to Non-

registered Output 5.0 6.0 7.5 10 15 ns

tPD2 I/O Input or Feedback to Non-

registered Feedback 5.0 6.0 7.5 10 12 ns

tSU Global Clock Setup Time 2.9 4.0 5.0 7.0 11 ns

tHGlobal Clock Hold Time 0.0 0.0 0.0 0.0 0.0 ns

tFSU Global Clock Setup Time of Fast

Input 2.5 2.5 2.5 3.0 3.0 ns

tFH Global Clock Hold of Fast Input 0.0 0.0 0.0 0.0 1.0 ns

tCO1 Global Clock to Output Delay 3.2 3.5 4.3 5.0 8.0 ns

tCH Global Clock High Time 2.0 2.5 3.0 4.0 5.0 ns

tCL Global Clock Low Time 2.0 2.5 3.0 4.0 5.0 ns

tASU Array Clock Setup Time 0.7 0.9 1.1 2.0 4.0 ns

tAH Array Clock Hold Time 1.8 2.1 2.7 3.0 4.0 ns

tACO1 Array Clock Output Delay 5.4 5.4 6.6 8.2 15 ns

tACH Array Clock High Time 2.5 2.5 3.0 4.0 6.0 ns

tACL Array Clock Low Time 2.5 2.5 3.0 4.0 6.0 ns

tCNT Minimum Clock Global Period 5.7 7.0 8.6 10.0 13 ns

fCNT(3) Maximum Internal Global Clock

Frequency 175.4 143 117 100 77 or

100(6) MHz

tACNT Minimum Array Clock Period 5.7 7.0 8.6 10.0 13 ns

fACNT(4) Maximum Internal Array Clock

Frequency 175.4 143 117 100 77 or

100(6) MHz

fMAX(5) Maximum Clock Frequency 250 200 167 125 80 or

125(6) MHz

tIN Input Pad and Buffer Delay 0.2 0.2 0.3 0.5 1.0 ns

tIO I/O Input Pad and Buffer Delay 0.2 0.2 0.3 0.5 1.0 ns

tFIN Fast Input Delay 2.2 2.1 2.5 1.0 1.5 ns

tSEXP Foldback Term Delay 3.1 3.8 4.6 5.0 8.0 ns

tPEXP Cascade Logic Delay 0.9 1.1 1.4 0.8 1.0 ns

tLAD Logic Array Delay 2.6 3.3 4.0 5.0 6.0 ns

tLAC Logic Control Delay 2.5 3.3 4.0 5.0 6.0 ns

tIOE Internal Output Enable Delay 0.7 0.8 1.0 2.0 3.0 ns

tOD1 Output Buffer and Pad Delay

(slow slew rate = OFF; VCCIO =

5V; CL=35pF)

0.2 0.3 0.4 1.5 2.5 ns

20 ATF1502SE 2401D–PLD–09/02

Notes: 1. See ordering Information for valid part numbers.

2. The tRPA parameter must be added to the tLAD,t

LAC,t

IC,t

ACL and tSEXP parameters for macrocells running in the reduced-

power mode.

3. fCNT is the fastest 16-bit counter frequency available, using the local feedback when applicable, and a PIA fan-out of one

logic block (16 macrocells). fCNT is also the Export Control Maximum flip-flop toggle rate, fTOG.

4. fACNT is the fastest 16-bit counter frequency available, using the internal array clock, local feedback when applicable and a

PIA fan-out of one logic block (16 macrocells).

5. fMAX is the fastest available frequency for pipelined data.

6. For clocked applications and frequencies above fCRITICAL, OR, non-clocked applications with dormant times less than 1/fCRIT-

ICAL, the device will achieve the speeds of the –10 column. See “Input Transition Detection/ Automatic Power Down” on page

tOD2 Output Buffer and Pad Delay

(slow slew rate = OFF; VCCIO =

3.3V; CL=35pF)

0.7 0.8 0.9 2.0 3.0 ns

tOD3 Output Buffer and Pad Delay

(slow slew rate = ON; VCCIO =5V

or 3.3V; CL=35pF)

5.2 5.3 5.4 5.5 6.0 ns

tZX1 Output Buffer Enable Delay

(slow slew rate = OFF; VCCIO =

5V; CL=35pF)

4.0 4.0 4.0 5.0 7.0 ns

tZX2 Output Buffer Enable Delay

(slow slew rate = OFF; VCCIO =

3.3V; CL=35pF)

4.5 4.5 4.5 5.5 7.0 ns

tZX3 Output Buffer Enable Delay

(slow slew rate = ON; VCCIO =5V

or 3.3V;

CL=35pF)

9.0 9.0 9.0 9.0 10 ns

tXZ Output Buffer Disable Delay

(CL=5pF) 4.0 4.0 4.0 5.0 6.0 ns

tSU Register Setup Time 0.8 1.0 1.3 2.0 4.0 ns

tHRegister Hold Time 1.7 2.0 2.5 3.0 4.0 ns

tFSU Register Setup Time of Fast

Input 1.9 1.7 1.7 3.0 5.0 ns

tFH Register Hold Time of Fast Input 0.6 0.7 0.8 0.5 2.0 ns

tRD Register Delay 1.2 1.6 1.2 2.0 2.0 ns

tCOMB Combinatorial Delay 0.9 1.1 1.0 2.0 2.0 ns

tIC Array Clock Delay 2.7 3.4 2.0 5.0 7.0 ns

tEN Register Enable Time 2.6 3.3 1.0 5.0 7.0 ns

tGLOB Global Control Delay 1.6 1.4 1.3 1.0 1.0 ns

tPRE Register Preset Time 2.0 2.4 1.9 3.0 5.0 ns

tCLR Register Clear Time 2.0 2.4 3.0 3.0 5.0 ns

tUIM Switch Matrix Delay 1.1 1.1 1.4 1.0 2.0 ns

tRPA(2) Reduced Power Adder 8 9 10 11 13 ns

AC Characteristics(1) ATF1502SE(L) (Continued)

Symbol Parameter

SE -5 SE -6 SE -7 SE -10 SEL -15(6)

UnitMin Max Min Max Min Max Min Max Min Max

ATF1502SE

2401D–PLD–09/02

STAND-BY ICC VS.

SUPPLY VOLTAGE (TA=25°C)

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

4.54.85.05.35.5

SUPPLY VOLTAGE (V)

(µA)

TBD

SUPPLY CURRENT VS.

INPUT FREQUENCY (VCC =5.0V,TA= 25°C)

0.000

20.000

40.000

60.000

80.000

100.000

120.000

140.000

0.0 0.5 2.5 5.0 7.5 10.0 25.0 37.5 50.0

FREQUENCY (MHz)

(mA)

TBD

OUTPUT SOURCE CURRENT VS.

SUPPLY VOLTAGE (VOH =2.4V)

-50

-40

-30

-20

-10

4.04.55.05.56.0

SUPPLY VOLTAGE (V)

(mA)

TBD

OUTPUT SINK CURRENT VS.

SUPPLY VOLTAGE (VOL =0.5V)

4.0 4.5 5.0 5.5 6.0

SUPPLY VOLTAGE (V)

Iol (mA)

TBD

NORMALIZED ICC VS. TEMP

0.4

0.6

0.8

1.0

1.2

1.4

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED Icc

TBD

SUPPLY CURRENT VS.

INPUT FREQUENCY (VCC =5.0V,T

A= 25°C)

0.000

0.200

0.400

0.600

0.800

1.000

0.0 0.5 2.5 5.0 7.5 10.0 25.0 37.5 50.0

FREQUENCY (MHz)

(mA)

TBD

OUTPUT SOURCE CURRENT VS.

OUTPUT VOLTAGE (VCC =5.0V,T

A= 25°C)

-90.0

-80.0

-70.0

-60.0

-50.0

-40.0

-30.0

-20.0

-10.0

0.0

0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00

VOH (V)

(mA)

TBD

OUTPUT SINK CURRENT VS.

OUTPUT VOLTAGE (VCC =5.0V,T

A=25°C)

0.0

20.0

40.0

60.0

80.0

100.0

120.0

140.0

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

SUPPLY VOLTAGE (V)

(mA)

TBD

22 ATF1502SE 2401D–PLD–09/02

INPUT CLAMP CURRENT VS.

INPUT VOLTAGE (VCC =5.0V,T

A=35°C)

-120

-100

-80

-60

-40

-20

0.0 -0.2 -0.4 -0.6 -0.8 -1.0

INPUT VOLTAGE (V)

INPUT CURRENT

(mA)

TBD

NORMALIZED TPD VS. VCC

0.8

0.9

1.0

1.1

1.2

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

NORMALIZED TCO VS. VCC

0.8

0.9

1.0

1.1

1.2

1.3

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

NORMALIZED TSU VS. VCC

0.8

0.9

1.0

1.1

1.2

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

INPUT CURRENT VS.

INPUT VOLTAGE (VCC =5.0V,TA= 25°C)

-30

-20

-10

0.0 1.0 2.0 3.0 4.0 5.0 6.0

INPUT VOLTAGE (V)

INPUT CURRENT

(uA)

TBD

NORMALIZED TPD VS.TEMP

0.8

0.9

1.0

1.1

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED T

TBD

NORMALIZED TCO VS.TEMP

0.8

0.9

1.0

1.1

-40.0 0.0 25.0 75.0

TEMPERATURE (V)

NORMALIZED T

TBD

NORMALIZED TSU VS.TEMP

0.8

0.9

1.0

1.1

1.2

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED T

TBD

ATF1502SE

2401D–PLD–09/02

DELTA TPD VS.

OUTPUT LOADING

-2

0 50 100 150 200 250 300

OUTPUT LOADING (PF)

DELTA T

(ns)

TBD

DELTA TPD VS. # OF OUTPUT SWITCHING

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

NUMBER OF OUTPUTS SWITCHING

DELTA T

(ns)

TBD

DELTA TCO VS.

OUTPUT LOADING

0.00

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

50 100 150 200 250 300

NUMBER OF OUTPUTS LOADING

DELTA T

(ns)

TBD

DELTA TCO VS. # OF OUTPUT SWITCHING

-0.3

-0.2

-0.1

0.0

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

NUMBER OF OUTPUTS SWITCHING

DELTA T

(ns)

TBD

24 ATF1502SE 2401D–PLD–09/02

ATF1502SE(L) Pinouts

44-lead TQFP - Top View

44-lead PLCC - Top View

TDI/I/O

I/O

GND

PD1/I/O

I/O

I/O/TMS

I/O

VCC

I/O

I/O/TDO

I/O

VCC

I/O

I/O/TCK

I/O

GND

I/O

GND

VCC

I/O

PD2/I/O

I/O

VCC

GCK2/OE2/I

GCLR/I

OE1/I

GCK1/I

GND

I/O/GCLK3

I/O

ATF1502SE(L)

ATF1504SE(L)

I/O/TDI

I/O

GND

PD1/I/O

I/O

TMS/I/O

I/O

VCC

I/O

I/O/TDO

I/O

VCC

I/O

I/O/TCK

I/O

GND

I/O

GND

VCC

I/O

PD2/I/O

I/O

VCC

I/OE2/GCK2

GCLR/I

I/OE1

GCK1/I

GND

GCK3

I/O

ATF1502SE(L)

ATF1504SE(L)

ATF1502SE

2401D–PLD–09/02

OE (1, 2) Global OE pins

GCLR Global Clear pin

GCLK (1, 2, 3) Global Clock pins

PD (1, 2) Power-down pins

TDI, TMS, TCK, TDO JTAG pins used for boundary-scan testing or in-system programming

GNDINT Ground pins for the internal device logic

GNDIO Ground pins for the I/O drivers

VCCINT VCC pins for the internal device logic (+3.3V)

VCCIO VCC for the I/O drivers

ATF1502SE(L) Dedicated Pinouts

Dedicated Pin 44-PLCC

J-lead 44-lead

TQFP

INPUT/GCLK1 43 37

INPUT/GCLR 139

INPUT/OE1 44 38

INPUT/OE2/GCLK2 2 40

I/O/GCLK3 41 35

I/O/PD (1,2) 11,25 5,19

I/O/TDI (JTAG) 7 1

I/O/TMS (JTAG) 13 7

I/O/TCK (JTAG) 32 26

I/O/TDO (JTAG) 38 32

GNDINT 22, 42 16, 36

GNDIO 10,30 4,24

VCCINT 3, 23 17, 41

VCCIO 15,35 9,29

# of Signal Pins 36 36

# User I/O Pins 32 32

26 ATF1502SE 2401D–PLD–09/02

ATF1502SE(L) I/O Pinouts

MC PLC 44-lead PLCC 44-lead TQFP

1A442

2A543

3A644

4/TDI A71

5A82

6A93

7/PD1 A115

8A126

9/TMS A137

10 A 14 8

11 A 16 10

12 A 17 11

13 A 18 12

14 A 19 13

15 A 20 14

16 A 21 15

17 B 41 35

18 B 40 34

19 B 39 33

20/TDO B3832

21 B 37 31

22 B 36 30

23 B 34 28

24 B 33 27

25/TCK B3226

26 B 31 25

27 B 29 23

28 B 28 22

29 B 27 21

30 B 26 20

31/PD2 B2519

32 B 24 18

ATF1502SE

2401D–PLD–09/02

Using “C” Product for Industrial

To use commercial product for industrial temperature ranges, downgrade one speed grade from the “I” to the “C” device,

and de-rate power by 30%.

ATF1502SE(L) Ordering Information

tPD

(ns) tCO1

(ns) FMAX

(MHz) Ordering Code Package Operation Range

5.0 3.2 250 ATF1502SE-5 AC44

ATF1502SE-5 JC44 44A

44J Commercial

(0°Cto70°C)

6.0 3.5 200 ATF1502SE-6 AC44

ATF1502SE-6 JC44 44A

44J Commercial

(0°Cto70°C)

7.5 4.3 167 ATF1502SE-7 AC44

ATF1502SE-7 JC44 44A

44J Commercial

(0°Cto70°C)

ATF1502SE-7 AI44

ATF1502SE-7 JI44 44A

44J Industrial

(-40°Cto+85°C)

10 5.0 125 ATF1502SE-10 AC44

ATF1502SE-10 JC44 44A

44J Commercial

(0°Cto70°C)

ATF1502SE-10 AI44

ATF1502SE-10 JI44 44A

44J Industrial

(-40°Cto+85°C)

15 8.0 77 ATF1502SEL-15 AC44

ATF1502SEL-15 JC44 44A

44J Commercial

(0°Cto70°C)

Package Type

44A 44-lead, Thin Plastic Gull Wing Quad Flatpack (TQFP)

44J 44-lead, Plastic J-leaded Chip Carrier (PLCC)

28 ATF1504SE(L) 2401D–PLD–09/02

AC Characteristics(1) ATF1504SE(L)

Symbol Parameter

SE -5 SE -6 SE -7 SE -10 SEL -15(6)

UnitMin Max Min Max Min Max Min Max Min Max

tPD1 Input or Feedback to Non-

registered Output 5.0 6.0 7.5 10 15 ns

tPD2 I/O Input or Feedback to Non-

registered Feedback 5.0 6.0 7.5 10 12 ns

tSU Global Clock Setup Time 2.9 3.6 6.0 7.0 11 ns

tHGlobal Clock Hold Time 0.0 0.0 0.0 0.0 0.0 ns

tFSU Global Clock Setup Time of Fast

Input 2.5 2.5 3.0 3.0 3.0 ns

tFH Global Clock Hold of Fast Input 0.0 0.0 0.5 0.5 1.0 ns

tCO1 Global Clock to Output Delay 3.2 4.0 4.5 5.0 9.0 ns

tCH Global Clock High Time 2.0 2.5 3.0 4.0 5.0 ns

tCL Global Clock Low Time 2.0 2.5 3.0 4.0 5.0 ns

tASU ArrayClockSetupTime0.70.92.02.05.0ns

tAH Array Clock Hold Time 1.8 2.9 2.0 3.0 4.0 ns

tACO1 Array Clock Output Delay 5.4 6.7 7.5 10.0 15 ns

tACH Array Clock High Time 2.5 2.5 3.0 4.0 6.0 ns

tACL Array Clock Low Time 2.5 2.5 3.0 4.0 6.0 ns

tCNT Minimum Clock Global Period 5.7 7.1 8.0 10 13 ns

fCNT(3) Maximum Internal Global Clock

Frequency 176 141 125 100 77 MHz

tACNT Minimum Array Clock Period 5.7 7.1 8.0 10 13 ns

fACNT(4) Maximum Internal Array Clock

Frequency 176 141 125 100 77 MHz

fMAX(5) Maximum Clock Frequency 250 200 167 125 77 MHz

tIN Input Pad and Buffer Delay 0.2 0.2 0.5 0.5 1.0 ns

tIO I/O Input Pad and Buffer Delay 0.2 0.2 0.5 0.5 1.0 ns

tFIN Fast Input Delay 2.2 2.6 1.0 1.0 2.0 ns

tSEXP Foldback Term Delay 3.1 3.8 4.0 5.0 8.0 ns

tPEXP Cascade Logic Delay 0.9 1.1 0.8 0.8 1.0 ns

tLAD Logic Array Delay 2.6 3.2 3.0 5.0 6.0 ns

tLAC Logic Control Delay 2.5 3.2 3.0 5.0 6.0 ns

tIOE Internal Output Enable Delay 0.7 0.8 2.0 2.0 3.0 ns

tOD1 Output Buffer and Pad Delay

(slow slew rate = OFF; VCCIO =

5V; CL=35pF)

0.2 0.3 2.0 1.5 2.5 ns

ATF1504SE(L)

2401D–PLD–09/02

Notes: 1. See ordering Information for valid part numbers.

2. The tRPA parameter must be added to the tLAD,t

LAC,t

IC,t

ACL and tSEXP parameters for macrocells running in the reduced-

power mode.

3. fCNT is the fastest 16-bit counter frequency available, using the local feedback when applicable, and a PIA fan-out of one

logic block (16 macrocells). fCNT is also the Export Control Maximum flip-flop toggle rate, fTOG.

4. fACNT is the fastest 16-bit counter frequency available, using the internal array clock, local feedback when applicable and a

PIA fan-out of one logic block (16 macrocells).

5. fMAX is the fastest available frequency for pipelined data.

6. For clocked applications and frequencies above fCRITICAL, OR, non-clocked applications with dormant times less than 1/fCRIT-

ICAL, the device will achieve the speeds of the –10 column. See “Input Transition Detection/ Automatic Power Down” on page

tOD2 Output Buffer and Pad Delay

(slow slew rate = OFF; VCCIO =

3.3V; CL=35pF)

0.7 0.8 2.5 2.0 3.0 ns

tOD3 Output Buffer and Pad Delay

(slowslewrate=ON;V

CCIO =5V

or 3.3V; CL=35pF)

5.2 5.3 7.0 5.5 6.0 ns

tZX1 Output Buffer Enable Delay

(slow slew rate = OFF; VCCIO =

5V; CL=35pF)

4.0 4.0 4.0 5.0 7.0 ns

tZX2 Output Buffer Enable Delay

(slow slew rate = OFF; VCCIO =

3.3V; CL=35pF)

4.5 4.5 4.5 5.5 7.0 ns

tZX3 Output Buffer Enable Delay

(slowslewrate=ON;V

CCIO =5V

or 3.3V; CL=35pF)

9.0 9.0 9.0 9.0 10 ns

tXZ Output Buffer Disable Delay

(CL=5pF) 4.0 4.0 4.0 5.0 6.0 ns

tSU Register Setup Time 0.8 1.0 3.0 2.0 5.0 ns

tHRegister Hold Time 1.7 2.0 2.0 3.0 4.0 ns

tFSU Register Setup Time of Fast

Input 1.9 1.8 3.0 3.0 5.0 ns

tFH Register Hold Time of Fast Input 0.6 0.7 0.5 0.5 2.0 ns

tRD Register Delay 1.2 1.6 1.0 2.0 2.0 ns

tCOMB Combinatorial Delay 0.9 1.0 1.0 2.0 2.0 ns

tIC Array Clock Delay 2.7 3.3 3.0 5.0 6.0 ns

tEN Register Enable Time 2.6 3.2 3.0 5.0 6.0 ns

tGLOB Global Control Delay 1.6 1.9 1.0 1.0 2.0 ns

tPRE Register Preset Time 2.0 2.4 2.0 3.0 4.0 ns

tCLR Register Clear Time 2.0 2.4 2.0 3.0 4.0 ns

tUIM Switch Matrix Delay 1.1 1.3 1.0 1.0 2.0 ns

tRPA(2) Reduced Power Adder 8.0 9.0 1.0 11 13 ns

AC Characteristics(1) ATF1504SE(L) (Continued)

Symbol Parameter

SE -5 SE -6 SE -7 SE -10 SEL -15(6)

UnitMin Max Min Max Min Max Min Max Min Max

30 ATF1504SE(L) 2401D–PLD–09/02

STAND-BY ICC VS.

SUPPLY VOLTAGE (TA=25°C)

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

4.54.85.05.35.5

SUPPLY VOLTAGE (V)

(µA)

TBD

SUPPLY CURRENT VS.

INPUT FREQUENCY (VCC =5.0V,TA= 25°C)

0.000

20.000

40.000

60.000

80.000

100.000

120.000

140.000

0.0 0.5 2.5 5.0 7.5 10.0 25.0 37.5 50.0

FREQUENCY (MHz)

(mA)

TBD

OUTPUT SOURCE CURRENT VS.

SUPPLY VOLTAGE (VOH =2.4V)

-50

-40

-30

-20

-10

4.04.55.05.56.0

SUPPLY VOLTAGE (V)

(mA)

TBD

OUTPUT SINK CURRENT VS.

SUPPLY VOLTAGE (VOL =0.5V)

4.0 4.5 5.0 5.5 6.0

SUPPLY VOLTAGE (V)

Iol (mA)

TBD

NORMALIZED ICC VS. TEMP

0.4

0.6

0.8

1.0

1.2

1.4

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED Icc

TBD

SUPPLY CURRENT VS.

INPUT FREQUENCY (VCC =5.0V,T

A= 25°C)

0.000

0.200

0.400

0.600

0.800

1.000

0.0 0.5 2.5 5.0 7.5 10.0 25.0 37.5 50.0

FREQUENCY (MHz)

(mA)

TBD

OUTPUT SOURCE CURRENT VS.

OUTPUT VOLTAGE (VCC =5.0V,TA= 25°C)

-90.0

-80.0

-70.0

-60.0

-50.0

-40.0

-30.0

-20.0

-10.0

0.0

0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00

VOH (V)

(mA)

TBD

OUTPUT SINK CURRENT VS.

OUTPUT VOLTAGE (VCC =5.0V,T

A= 25°C)

0.0

20.0

40.0

60.0

80.0

100.0

120.0

140.0

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

SUPPLY VOLTAGE (V)

(mA)

TBD

ATF1504SE(L)

2401D–PLD–09/02

INPUT CLAMP CURRENT VS.

INPUT VOLTAGE (VCC =5.0V,T

A=35°C)

-120

-100

-80

-60

-40

-20

0.0 -0.2 -0.4 -0.6 -0.8 -1.0

INPUT VOLTAGE (V)

INPUT CURRENT

(mA)

TBD

NORMALIZED TPD VS. VCC

0.8

0.9

1.0

1.1

1.2

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

NORMALIZED TCO VS. VCC

0.8

0.9

1.0

1.1

1.2

1.3

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

NORMALIZED TSU VS. VCC

0.8

0.9

1.0

1.1

1.2

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

INPUT CURRENT VS.

INPUT VOLTAGE (VCC =5.0V,TA= 25°C)

-30

-20

-10

0.0 1.0 2.0 3.0 4.0 5.0 6.0

INPUT VOLTAGE (V)

INPUT CURRENT

(uA)

TBD

NORMALIZED TPD VS.TEMP

0.8

0.9

1.0

1.1

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED T

TBD

NORMALIZED TCO VS.TEMP

0.8

0.9

1.0

1.1

-40.0 0.0 25.0 75.0

TEMPERATURE (V)

NORMALIZED T

TBD

NORMALIZED TSU VS.TEMP

0.8

0.9

1.0

1.1

1.2

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED T

TBD

32 ATF1504SE(L) 2401D–PLD–09/02

DELTA TPD VS.

OUTPUT LOADING

-2

0 50 100 150 200 250 300

OUTPUT LOADING (PF)

DELTA T

(ns)

TBD

DELTA TPD VS. # OF OUTPUT SWITCHING

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

NUMBER OF OUTPUTS SWITCHING

DELTA T

(ns)

TBD

DELTA TCO VS.

OUTPUT LOADING

0.00

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

50 100 150 200 250 300

NUMBER OF OUTPUTS LOADING

DELTA T

(ns)

TBD

DELTA TCO VS. # OF OUTPUT SWITCHING

-0.3

-0.2

-0.1

0.0

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

NUMBER OF OUTPUTS SWITCHING

DELTA T

(ns)

TBD

ATF1504SE(L)

2401D–PLD–09/02

ATF1504SE(L) Pinouts

44-lead TQFP – Top View

44-lead PLCC – Top View

I/O/TDI

I/O

GND

PD1/I/O

I/O

TMS/I/O

I/O

VCC

I/O

I/O/TDO

I/O

VCC

I/O

I/O/TCK

I/O

GND

I/O

GND

VCC

I/O

PD2/I/O

I/O

VCC

I/OE2/GCK2

GCLR/I

I/OE1

GCK1/I

GND

GCK3

I/O

ATF1502SE(L)

ATF1504SE(L)

TDI/I/O

I/O

GND

PD1/I/O

I/O

I/O/TMS

I/O

VCC

I/O

I/O/TDO

I/O

VCC

I/O

I/O/TCK

I/O

GND

I/O

GND

VCC

I/O

PD2/I/O

I/O

VCC

GCK2/OE2/I

GCLR/I

OE1/I

GCK1/I

GND

I/O/GCLK3

I/O

ATF1502SE(L)

ATF1504SE(L)

34 ATF1504SE(L) 2401D–PLD–09/02

84-lead PLCC – Top View

100-lead TQFP – Top View

I/O/PD1

VCCIO

I/O/TDI

I/O

GND

I/O

I/O/TMS

I/O

VCCIO

I/O

GND

I/O

GND

I/O/TDO

I/O

VCCIO

I/O

I/O/TCK

I/O

GND

I/O

VCCIO

I/O

GND

VCCINT

I/O

I/O/PD2

I/O

GND

I/O

VCCIO

I/O

GND

I/O

VCCINT

INPUT/OE2/GCLK2

INPUT/GCLR

INPUT/OE1

INPUT/GCLK1

GND

I/O/GCLK3

I/O

VCCIO

I/O

ATF1504SE(L)

ATF1508SE(L)

I/O/PD1

I/O

VCCIO

I/O/TDI

I/O

GND

I/O

I/O/TMS

I/O

VCCIO

I/O

GND

I/O/TDO

I/O

VCCIO

I/O

I/O/TCK

I/O

GND

I/O

VCCIO

100

GND

I/O

VCCIO

I/O

GND

VCCINT

I/O

I/O/PD2

I/O

GND

I/O

GND

I/O

VCCINT

INPUT/OE2/GCLK2

INPUT/GCLR

INPUT/OE1

INPUT/GCLK1

GND

I/O/GCLK3

I/O

VCCIO

I/O

ATF1508SE(L)

ATF1504SE(L)

2401D–PLD–09/02

OE (1, 2) Global OE pins

GCLR Global Clear pin

GCLK (1, 2, 3) Global Clock pins

PD (1, 2) Power-down pins

TDI, TMS, TCK, TDO JTAG pins used for boundary-scan testing or in-system programming

GNDINT Ground pins for the internal device logic

GNDIO Ground pins for the I/O pins

VCCINT VCC pins for the internal device logic

VCCIO VCC for the I/O drivers

ATF1504SE(L) Dedicated Pinouts

Dedicated Pin 44-lead

TQFP 44-lead

PLCC 84-lead

PLCC 100-lead

TQFP

INPUT/GCLK137438387

INPUT/GCLR 39 1 1 89

INPUT/OE1 38448488

INPUT/OE2/GCLK2 40 2 2 90

I/O/GCLK3 35418185

I/O/PD (1,2) 5, 19 11, 25 20, 46 12, 42

I/O/TDI(JTAG)1 7144

I/O/TMS (JTAG) 7 13 23 15

I/O/TCK(JTAG)26326262

I/O/TDO(JTAG)32387173

GNDINT 16, 36 22, 44 42, 82 38, 86

GNDIO 4, 24 10, 30 7, 18, 32,47, 69, 72 11, 26, 43,

59, 74, 95

VCCINT 17, 41 3, 23 3, 43 39, 91

VCCIO 9, 29 15, 35 13, 26, 33,

53, 66, 78 3, 18, 34,

51, 66, 82

N/C - - - 1, 2, 5, 7, 22,

24, 27, 28, 49,

50, 53, 55, 70,

72, 77, 78

#ofSignalPins36366868

# User I/O Pins 32 32 64 64

36 ATF1504SE(L) 2401D–PLD–09/02

ATF1504SE(L) I/O Pinouts

MC PLC 44-lead

PLCC 44-lead

TQFP 84-lead

PLCC 100-lead

TQFP MC PLC 44-lead

PLCC 44-lead

TQFP 84-lead

PLCC 100-lead

TQFP

1 A 12 6 22 14 33 C 24 18 44 40

2 A - - 21 13 34 C - - 45 41

3A/

PD1 11 5 201235C/

PD2 25 19 46 42

4 A 9 3 18 10 36 C 26 20 48 44

5 A 8 2 17 9 37 C 27 21 49 45

6A--16838C--5046

7A--15639C--5147

TDI A 7 1 14 4 40 C 28 22 52 48

9 A - - 1210041 C 29235452

10A - - 119942C - - 5554

11 A 6 44 10 98 43 C - - 56 56

12 A - - 9 97 44 C - - 57 57

13 A - - 8 96 45 C - - 58 58

14 A 5 43 6 94 46 C 31 25 60 60

15 A - - 5 93 47 C - - 61 61

16 A 4 42 4 92 48/

TCK C32266262

17 B 21 15 41 37 49 D 33 27 63 63

18B - - 403650D - - 6464

19 B 20 14 39 35 51 D 34 28 65 65

20 B 19 13 37 33 52 D 36 30 67 67

21 B 18 12 36 32 53 D 37 31 68 68

22B - - 353154D - - 6969

23B - - 343055D - - 7071

24 B 1711332956/

TDO D38327173

25 B 16 10 31 25 57 D 39 33 73 75

26B - - 302358D - - 7476

27B - - 292159D - - 7579

28B - - 282060D - - 7680

29B - - 271961D - - 7781

30 B 14 8 25 17 62 D 40 34 79 83

31B - - 241663D - - 8084

32/

TMS B 13 7 23 15 64 D/

GCLK3 41 35 81 85

ATF1504SE(L)

2401D–PLD–09/02

Using “C” Product for Industrial

To use commercial product for industrial temperature ranges, down grade one speed grade from the “I” to the “C” device,

and de-rate power by 30%.

ATF1504SE(L) Ordering Information

tPD

(ns) tCO1

(ns) fMAX

(MHz) Ordering Code Package Operation Range

5.0 3.2 250 ATF1504SE-5 AC44

ATF1504SE-5 JC44

ATF1504SE-5 JC84

ATF1504SE-5 AC100

44A

44J

84J

100A

Commercial

(0°Cto70°C)

6.0 4.0 200 ATF1504SE-6 AC44

ATF1504SE-6 JC44

ATF1504SE-6 JC84

ATF1504SE-6 AC100

44A

44J

84J

100A

Commercial

(0°Cto70°C)

7.5 4.5 167 ATF1504SE-7 AC44

ATF1504SE-7 JC44

ATF1504SE-7 JC84

ATF1504SE-7 AC100

44A

44J

84J

100A

Commercial

(0°Cto70°C)

ATF1504SE-7 AI44

ATF1504SE-7 JI44

ATF1504SE-7 J84

ATF1504SE-7 AI100

44A

44J

84J

100A

Industrial

(-40°Cto+85°C)

10 5.0 125 ATF1504SE-10 AC44

ATF1504SE-10 JC44

ATF1504SE-10 JC84

ATF1504SE-10 AC100

44A

44J

84J

100A

Commercial

(0°Cto70°C)

ATF1504SE-10 AI44

ATF1504SE-10 JI44

ATF1504SE-10 JI84

ATF1504SE-10 AI100

44A

44J

84J

100A

Industrial

(-40°Cto+85°C)

15 9.0 77 ATF1504SEL-15 AC44

ATF1504SEL-15 JC44

ATF1504SEL-15 JC84

ATF1504SEL-15 AC100

44A

44J

84J

100A

Commercial

(0°Cto70°C)

Package Type

44A 44-lead, Thin Plastic Gull Wing Quad Flatpack (TQFP)

44J 44-lead, Plastic J-leaded Chip Carrier (PLCC)

84J 84-lead, Plastic J-leaded Chip Carrier (PLCC)

100A 100-lead, Very Thin Plastic Gull Wing Quad Flatpack (TQFP)

38 ATF1508SE(L) 2401D–PLD–09/02

AC Characteristics(1) ATF1508SE(L)

Symbol Parameter

SE -6 SE -7 SE -10 SEL -15(6)

UnitMin Max Min Max Min Max Min Max

tPD1 Input or Feedback to Non-registered Output 6 7.5 10 15 ns

tPD2 I/O Input or Feedback to Non-registered Feedback 6 7.5 10 15 ns

tSU Global Clock Setup Time 3.4 6.0 7.0 11 ns

tHGlobal Clock Hold Time 0.0 0.0 0.0 0.0 ns

tFSU Global Clock Setup Time of Fast Input 2.5 3.0 3.0 3.0 ns

tFH Global Clock Hold of Fast Input 0 0.5 0.5 1 ns

tCO1 Global Clock to Output Delay 4.0 4.5 5.0 8.0 ns

tCH Global Clock High Time 3 3.0 4.0 5.0 ns

tCL Global Clock Low Time 3 3.0 4.0 5.0 ns

tASU Array Clock Setup Time 0.9 3.0 2.0 4.0 ns

tAH Array Clock Hold Time 1.8 2.0 5.0 4.0 ns

tACO1 Array Clock Output Delay 6.5 7.5 10 15 ns

tACH Array Clock High Time 3.0 3 4.0 6.0 ns

tACL Array Clock Low Time 3.0 3 4.0 6.0 ns

tCNT Minimum Clock Global Period 6.8 8.0 10 13 ns

fCNT(3) Maximum Internal Global Clock Frequency 150 125 100 77 MHz

tACNT Minimum Array Clock Period 6.8 8.0 10 13 ns

fACNT(4) Maximum Internal Array Clock Frequency 150 125 100 77 MHz

fMAX(5) Maximum Clock Frequency 167 167 125 100 MHz

tIN Input Pad and Buffer Delay 0.2 0.5 0.5 2.0 ns

tIO I/O Input Pad and Buffer Delay 0.2 0.5 0.5 2.0 ns

tFIN Fast Input Delay 2.6 1.0 1.0 2.0 ns

tSEXP Foldback Term Delay 3.7 4.0 5.0 8.0 ns

tPEXP Cascade Logic Delay 1.1 0.8 0.0 1.0 ns

tLAD Logic Array Delay 3.0 3.0 5.0 6.0 ns

tLAC Logic Control Delay 3.0 3.0 5.0 6.0 ns

tIOE Internal Output Enable Delay 0.7 2.0 2.0 3.0 ns

tOD1 Output Buffer and Pad Delay

(slow slew rate = OFF; VCCIO =5V;C

L=35pF) 0.4 2.0 1.5 4.0 ns

tOD2 Output Buffer and Pad Delay

(slow slew rate = OFF; VCCIO =3.3V;C

L=35pF) 0.9 2.5 2.0 5.0 ns

tOD3 Output Buffer and Pad Delay

(slow slew rate = ON; VCCIO =5Vor3.3V;

CL=35pF)

5.4 7.0 5.5 8.0 ns

tZX1 Output Buffer Enable Delay

(slow slew rate = OFF; VCCIO =5V;C

L=35pF) 4.0 4.0 5 6.0 ns

ATF1508SE(L)

2401D–PLD–09/02

Notes: 1. See ordering Information for valid part numbers.

2. The tRPA parameter must be added to the tLAD,t

LAC,t

IC,t

ACL and tSEXP parameters for macrocells running in the reduced-

power mode.

3. fCNT is the fastest 16-bit counter frequency available, using the local feedback when applicable, and a PIA fan-out of one

logic block (16 macrocells). fCNT is also the Export Control Maximum flip-flop toggle rate, fTOG.

4. fACNT is the fastest 16-bit counter frequency available, using the internal array clock, local feedback when applicable and a

PIA fan-out of one logic block (16 macrocells).

5. fMAX is the fastest available frequency for pipelined data.

6. For clocked applications and frequencies above fCRITICAL, OR, non-clocked applications with dormant times less than 1/fCRIT-

ICAL, the device will achieve the speeds of the –10 column. See “Input Transition Detection/ Automatic Power Down” on page

tZX2 Output Buffer Enable Delay

(slow slew rate = OFF; VCCIO =3.3V;C

L=35pF) 4.5 4.5 5.5 7.0 ns

tZX3 Output Buffer Enable Delay

(slow slew rate = ON; VCCIO =5Vor3.3V;

CL=35pF)

99910.0ns

tXZ Output Buffer Disable Delay (CL= 5 pF) 4 4 5 6.0 ns

tSU Register Setup Time 1.0 3.0 2.0 4.0 ns

tHRegister Hold Time 1.7 2.0 5.0 4.0 ns

tFSU Register Setup Time of Fast Input 1.9 3.0 3.0 2.0 ns

tFH Register Hold Time of Fast Input 0.6 0.5 0.5 1.0 ns

tRD Register Delay 1.4 1.0 2.0 1.0 ns

tCOMB Combinatorial Delay 1.0 1.0 2.0 1.0 ns

tIC Array Clock Delay 3.1 3.0 5.0 6.0 ns

tEN Register Enable Time 3.0 3.0 5.0 6.0 ns

tGLOB Global Control Delay 2.0 1.0 1.0 1.0 ns

tPRE Register Preset Time 2.4 2.0 3.0 4.0 ns

tCLR Register Clear Time 2.4 2.0 3.0 4.0 ns

tUIM Switch Matrix Delay 1.4 1.0 1.0 2.0 ns

tRPA(2) Reduced Power Adder 10 10 11 13 ns

AC Characteristics(1) ATF1508SE(L) (Continued)

Symbol Parameter

SE -6 SE -7 SE -10 SEL -15(6)

UnitMin Max Min Max Min Max Min Max

40 ATF1508SE(L) 2401D–PLD–09/02

STAND-BY ICC VS.

SUPPLY VOLTAGE (TA=25°C)

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

(µA)

TBD

SUPPLY CURRENT VS.

INPUT FREQUENCY (VCC =5.0V,T

A= 25°C)

0.000

20.000

40.000

60.000

80.000

100.000

120.000

140.000

0.0 0.5 2.5 5.0 7.5 10.0 25.0 37.5 50.0

FREQUENCY (MHz)

(mA)

TBD

OUTPUT SOURCE CURRENT VS.

SUPPLY VOLTAGE (VOH =2.4V)

-50

-40

-30

-20

-10

4.0 4.5 5.0 5.5 6.0

SUPPLY VOLTAGE (V)

(mA)

TBD

OUTPUT SINK CURRENT VS.

SUPPLY VOLTAGE (VOL =0.5V)

4.0 4.5 5.0 5.5 6.0

SUPPLY VOLTAGE (V)

Iol (mA)

TBD

NORMALIZED ICC VS. TEMP

0.4

0.6

0.8

1.0

1.2

1.4

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED Icc

TBD

SUPPLY CURRENT VS.

INPUT FREQUENCY (VCC =5.0V,T

A= 25°C)

0.000

0.200

0.400

0.600

0.800

1.000

0.0 0.5 2.5 5.0 7.5 10.0 25.0 37.5 50.0

FREQUENCY (MHz)

(mA)

TBD

OUTPUT SOURCE CURRENT VS.

OUTPUT VOLTAGE (VCC =5.0V,TA= 25°C)

-90.0

-80.0

-70.0

-60.0

-50.0

-40.0

-30.0

-20.0

-10.0

0.0

0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00

VOH (V)

(mA)

TBD

OUTPUT SINK CURRENT VS.

OUTPUT VOLTAGE (VCC =5.0V,T

A= 25°C)

0.0

20.0

40.0

60.0

80.0

100.0

120.0

140.0

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

SUPPLY VOLTAGE (V)

(mA)

TBD

ATF1508SE(L)

2401D–PLD–09/02

INPUT CLAMP CURRENT VS.

INPUT VOLTAGE (VCC =5.0V,T

A=35°C)

-120

-100

-80

-60

-40

-20

0.0 -0.2 -0.4 -0.6 -0.8 -1.0

INPUT VOLTAGE (V)

INPUT CURRENT

(mA)

TBD

NORMALIZED TPD VS. VCC

0.8

0.9

1.0

1.1

1.2

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

NORMALIZED TCO VS. VCC

0.8

0.9

1.0

1.1

1.2

1.3

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

NORMALIZED TSU VS. VCC

0.8

0.9

1.0

1.1

1.2

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

INPUT CURRENT VS.

INPUT VOLTAGE (VCC =5.0V,T

A= 25°C)

-30

-20

-10

0.0 1.0 2.0 3.0 4.0 5.0 6.0

INPUT VOLTAGE (V)

INPUT CURRENT

(uA)

TBD

NORMALIZED TPD VS. TEMP

0.8

0.9

1.0

1.1

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED T

TBD

NORMALIZED TCO VS. TEMP

0.8

0.9

1.0

1.1

-40.0 0.0 25.0 75.0

TEMPERATURE (V)

NORMALIZED T

TBD

NORMALIZED TSU VS. TEMP

0.8

0.9

1.0

1.1

1.2

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED T

TBD

42 ATF1508SE(L) 2401D–PLD–09/02

DELTA TPD VS.

OUTPUT LOADING

-2

0 50 100 150 200 250 300

OUTPUT LOADING (PF)

DELTA T

(ns)

TBD

DELTA TPD VS. # OF OUTPUT SWITCHING

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

NUMBER OF OUTPUTS SWITCHING

DELTA T

(ns)

TBD

DELTA TCO VS.

OUTPUT LOADING

0.00

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

50 100 150 200 250 300

NUMBER OF OUTPUTS LOADING

DELTA T

(ns)

TBD

DELTA TCO VS. # OF OUTPUT SWITCHING

-0.3

-0.2

-0.1

0.0

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

NUMBER OF OUTPUTS SWITCHING

DELTA T

(ns)

TBD

ATF1508SE(L)

2401D–PLD–09/02

ATF1508SE(L) Pinouts

84-lead PLCC – Top View

100-lead TQFP – Top View

I/O/PD1

VCCIO

I/O/TDI

I/O

GND

I/O

I/O/TMS

I/O

VCCIO

I/O

GND

I/O

GND

I/O/TDO

I/O

VCCIO

I/O

I/O/TCK

I/O

GND

I/O

VCCIO

I/O

GND

VCCINT

I/O

I/O/PD2

I/O

GND

I/O

VCCIO

I/O

GND

I/O

VCCINT

INPUT/OE2/GCLK2

INPUT/GCLR

INPUT/OE1

INPUT/GCLK1

GND

I/O/GCLK3

I/O

VCCIO

I/O

ATF1504SE(L)

ATF1508SE(L)

I/O/PD1

I/O

VCCIO

I/O/TDI

I/O

GND

I/O

I/O/TMS

I/O

VCCIO

I/O

GND

I/O/TDO

I/O

VCCIO

I/O

I/O/TCK

I/O

GND

I/O

VCCIO

100

GND

I/O

VCCIO

I/O

GND

VCCINT

I/O

I/O/PD2

I/O

GND

I/O

GND

I/O

VCCINT

INPUT/OE2/GCLK2

INPUT/GCLR

INPUT/OE1

INPUT/GCLK1

GND

I/O/GCLK3

I/O

VCCIO

I/O

ATF1508SE(L)

44 ATF1508SE(L) 2401D–PLD–09/02

100-lead PQFP – Top View

160-lead TQFP – Top View

I/O

VCCIO

I/O/TDI

I/O

GND

I/O/PD1

I/O

I/O/TMS

I/O

VCCIO

I/O

GND

I/O

GND

I/O/TDO

I/O

VCCIO

I/O

I/O/TCK

I/O

GND

I/O

VCCIO

100

I/O

VCCIO

I/O

GND

VCCINT

I/O

I/O/PD2

GND

I/O

GND

I/O

VCCINT

INPUT/OE2/GCLK2

INPUT/GCLR

INPUT/OE1

INPUT/GCLK1

GND

I/O/GCLK3

I/O

VCCIO

I/O

120

101

160

141

ATF1508SE(L)

2401D–PLD–09/02

OE (1,2) Global OE pins.

GCLR Global Clear pin.

GCLK (1,2,3) Global Clock pins.

TDI, TMS, TCK, TDO JTAG pins used for In System Programming or Boundary-scan Testing.

GNDINT Ground pins for the internal device logic.

GNDIO Ground pins for the I/O drivers.

VCCINT VCC pins for the internal device logic.

VCCIO VCC pins for the I/O drivers.

ATF1508SE(L) Dedicated Pinouts

Dedicated Pin 84-PLCC J-

Lead 100-pin TQFP 100-pin PQFP 160-lead PQFP

INPUT/GCLK1 83 87 89 139

INPUT/GCLR 1 89 91 141

INPUT/OE1 84 88 90 140

INPUT/OE2/GCK2 2 90 92 142

I/O/GCLK3 81 85 87 137

I/O PD (1,2) 12, 45 1,41 3, 43 63,159

TDI (JTAG) 14 4 6 9

TMS (JTAG) 23 15 17 22

TCK (JTAG) 62 62 64 99

TDO (JTAG) 71 73 75 112

GNDINT 42, 82 38,86 40,88 60,138

GNDIO 7, 19, 32, 47,

59, 72 11, 26, 43, 59,

74, 95 13, 28, 61,

76, 45, 97 17, 42,113, 66, 95,148

VCCINT 3, 43 39, 91 41,93 61,143

VCCIO 13, 26, 38, 53,

66, 78 3, 18, 34, 51,

66, 82 5,20,36,53,68,84 8,26,55,79,104,133

No Connect - -

–

1,2,3,4,5,6,7,34,35,36,

37,38,39,40,44,45,46,

47,74,75,76,77,81,82,

83,84,85,86,87,114,

115,116,117,118,119,

120,124,125,126,127,

154,155,156,157

# of Signal pins 68 84 84 100

# of User I/O pins 64 80 80 96

46 ATF1508SE(L) 2401D–PLD–09/02

ATF1508SE(L) I/O Pinouts

MC PLB 84-PLCC

J-lead 100-lead

PQFP 100-lead

TQFP 160-lead

PQFP MC PLB 84-PLCC

J-lead 100-lead

PQFP 100-lead

TQFP 160-lead

PQFP

1A–4216033C–272541

2A––––34C––––

3/PD1 A 12 3 115935 C31262433

4A–––15836C–––32

5 A 11 2 100 153 37 C 30 25 23 31

6 A 10 1 9915238 C29242230

7A––––39C––––

8 A 9 100 98 151 40 C 28 23 21 29

9 A – 99 97 150 41 C – 22 20 28

10A––––42C––––

11 A 8 98 96 149 43 C 27 21 19 27

12 A – – – 147 44 C – – – 25

13 A 6 96 94 146 45 C 25 19 17 24

14 A 5 95 93 145 46 C 24 18 16 23

15A––––47C––––

16 A 4 94 92 144 48/TMS C23171522

17 B 22 16 14 21 49 D 41 39 37 59

18B––––50D––––

19 B 21 15 13 20 51 D 40 38 36 58

20 B – – – 19 52 D – – – 57

21 B 20 14 12 18 53 D 39 37 35 56

22 B – 12 10 16 54 D – 35 33 54

23B––––55D––––

24 B 1811 9 1556 D37343253

25 B 1710 8 1457 D36333152

26B––––58D––––

27 B 16 9 7 13 59 D 35 32 30 51

28 B – – – 12 60 D – – – 50

29 B 15 8 6 11 61 D 34 31 29 49

30 B – 7 5 10 62 D – 30 28 48

31B––––63D––––

32/

TDI B/ 14 6 4 9 64 D 33 29 27 43

ATF1508SE(L)

2401D–PLD–09/02

65 E 44 42 40 62 97 G 63 65 63 100

66E––––98G––––

67/PD2 E45 43 41 63 99 G 64 66 64 101

68 E – – – 64 100 G – – – 102

69 E 46 44 42 65 101 G 65 67 65 103

70 E – 46 44 67 102 G – 69 67 105

71E––––103G––––

72 E 48 47 45 68 104 G 67 70 68 106

73 E 49 48 46 69 105 G 68 71 69 107

74E––––106G––––

75 E 50 49 47 70 107 G 69 72 70 108

76 E – – – 71 108 G – – – 109

77 E 51 50 48 72 109 G 70 73 71 110

78 E – 51 49 73 110 G – 74 72 111

79E––––111G––––

80 E 52 52 50 78 112/TDO G 71 75 73 112

81 F – 54 52 80 113 H – 77 75 121

82F––––114H––––

83 F 54 55 53 88 115 H 73 78 76 122

84 F – – – 89 116 H – – – 123

85 F 55 56 54 90 117 H 74 79 77 128

86 F 56 57 55 91 118 H 75 80 78 129

87F––––119H––––

88 F 57 58 56 92 120 H 76 81 79 130

89 F – 59 57 93 121 H – 82 80 131

90F––––122H––––

91 F 58 60 58 94 123 H 77 83 81 132

92 F – – – 96 124 H – – – 134

93 F 60 62 60 97 125 H 79 85 83 135

94 F 61 63 61 98 126 H 80 86 84 136

95F––––127H––––

96 F/

TCK 62 64 62 99 128/GCLK3 H 81 87 85 137

ATF1508SE(L) I/O Pinouts (Continued)

MC PLB 84-PLCC

J-lead 100-lead

PQFP 100-lead

TQFP 160-lead

PQFP MC PLB 84-PLCC

J-lead 100-lead

PQFP 100-lead

TQFP 160-lead

PQFP

48 ATF1508SE(L) 2401D–PLD–09/02

Using “C” Product for Industrial

To use commercial product for industrial temperature ranges, down-grade one speed grade from the “I” to the “C” device

and de-rate power by 30%.

ATF1508SE(L) Ordering Information

tPD

(ns) tCO1

(ns) fMAX

(MHz) Ordering Code Package Operation Range

6.0 4.0 167 ATF1508SE-5 JC84

ATF1508SE-5 AC100

ATF1508SE-5 QC100

ATF1508SE-5 QC160

84J

100A

100Q4

160Q1

Commercial

(0°Cto70°C)

7.5 4.5 167 ATF1508SE-7 JC84

ATF1508SE-7 AC100

ATF1508SE-7 QC100

ATF1508SE-7 QC160

84J

100A

100Q4

160Q1

Commercial

(0°Cto70°C)

ATF1508SE-7 JI84

ATF1508SE-7 AI100

ATF1508SE-7 QI100

ATF1508SE-7 QI160

84J

100A

100Q4

160Q1

Industrial

(-40°Cto+85°C)

10 5.0 125 ATF1508SE-10 JC84

ATF1508SE-10 AC100

ATF1508SE-10 QC100

ATF1508SE-10 QC160

84J

100A

100Q4

160Q1

Commercial

(0°Cto70°C)

ATF1508SE-10 JI84

ATF1508SE-10 AI100

ATF1508SE-10 QI100

ATF1508SE-10 QI160

84J

100A

100Q4

160Q1

Industrial

(-40°Cto+85°C)

15 8.0 100 ATF1508SEL-15 JC84

ATF1508SEL-15 AC100

ATF1508SEL-15 QC100

ATF1508SEL-15 QC160

84J

100A

100Q4

160Q1

Commercial

(0°Cto70°C)

Package Type

84J 84-lead, Plastic J-leaded Chip Carrier (PLCC)

100A 100-lead, Very Thin Plastic Gull Wing Quad Flatpack (TQFP)

100Q4 100-lead, Plastic Quad Pin Flat Package (PQFP)

160Q1 160-lead, Plastic Quad Pin Flat Package (PQFP)

ATF1516SE(L)

2401D–PLD–09/02

AC Characteristics(1) ATF1516SE(L)

Symbol Parameter

SE -7 SE -10 SEL -15(6)

UnitMin Max Min Max Min Max

tPD1 Input or Feedback to Non-registered Output 7.5 10 15 ns

tPD2 I/O Input or Feedback to Non-registered Feedback 7.5 10 12 ns

tSU Global Clock Setup Time 3.9 7.0 11 ns

tHGlobal Clock Hold Time 0.0 0.0 0.0 ns

tFSU Global Clock Setup Time of Fast Input 3.9 3.0 3.0 ns

tFH Global Clock Hold of Fast Input 0.0 0.5 1 ns

tCO1 Global Clock to Output Delay 4.7 5.0 8.0 ns

tCH Global Clock High Time 3.0 4.0 5.0 ns

tCL Global Clock Low Time 3.0 4.0 5 ns

tASU Array Clock Setup Time 0.8 2.0 4.0 ns

tAH Array Clock Hold Time 1.9 3.0 4.0 ns

tACO1 Array Clock Output Delay 7.3 1 10 15 ns

tACH Array Clock High Time 3.0 4 6 ns

tACL Array Clock Low Time 3.0 4 6 ns

tCNT Minimum Clock Global Period 7.8 10 13 ns

fCNT(3) Maximum Internal Global Clock Frequency 130 100 77 MHz

tACNT Minimum Array Clock Period 7.8 10 13 ns

fACNT(4) Maximum Internal Array Clock Frequency 130 100 77 MHz

fMAX(5) Maximum Clock Frequency 167 125 100 MHz

tIN Input Pad and Buffer Delay 0.3 0.5 2.0 ns

tIO I/O Input Pad and Buffer Delay 0.3 0.5 2.0 ns

tFIN Fast Input Delay 3.4 1.0 2.0 ns

tSEXP Foldback Term Delay 3.9 5.0 8.0 ns

tPEXP Cascade Logic Delay 1.1 0.8 1.0 ns

tLAD Logic Array Delay 2.6 5.0 6.0 ns

tLAC Logic Control Delay 2.6 5.0 6.0 ns

tIOE Internal Output Enable Delay 0.8 2.0 3.0 ns

tOD1 Output Buffer and Pad Delay

(slow slew rate = OFF; VCCIO =5V;C

L=35pF) 0.5 1.5 4.0 ns

tOD2 Output Buffer and Pad Delay

(slow slew rate = OFF; VCCIO =3.3V;C

L=35pF) 1.0 2.0 5.0 ns

tOD3 Output Buffer and Pad Delay

(slow slew rate = ON; VCCIO =5Vor3.3V;

CL=35pF)

5.5 5.5 8.0 ns

tZX1 Output Buffer Enable Delay

(slow slew rate = OFF; VCCIO =5V;C

L=35pF) 4.0 5.0 6.0 ns

50 ATF1516SE(L) 2401D–PLD–09/02

Notes: 1. See ordering Information for valid part numbers.

2. The tRPA parameter must be added to the tLAD,t

LAC,t

IC,t

ACL and tSEXP parameters for macrocells running in the reduced-

power mode.

3. fCNT is the fastest 16-bit counter frequency available, using the local feedback when applicable, and a PIA fan-out of one

logic block (16 macrocells). fCNT is also the Export Control Maximum flip-flop toggle rate, fTOG.

4. fACNT is the fastest 16-bit counter frequency available, using the internal array clock, local feedback when applicable and a

PIA fan-out of one logic block (16 macrocells).

5. fMAX is the fastest available frequency for pipelined data.

6. For clocked applications and frequencies above fCRITICAL, OR, non-clocked applications with dormant times less than 1/fCRIT-

ICAL, the device will achieve the speeds of the –10 column. See “Input Transition Detection/ Automatic Power Down” on page

tZX2 Output Buffer Enable Delay

(slow slew rate = OFF; VCCIO =3.3V;C

L=35pF) 4.5 5.5 7.0 ns

tZX3 Output Buffer Enable Delay

(slow slew rate = ON; VCCIO =5Vor3.3V;C

L=35

pF)

9.0 9.0 10.0 ns

tXZ Output Buffer Disable Delay (CL= 5 pF) 4.0 5.0 6.0 ns

tSU Register Setup Time 1.1 2.0 4.0 ns

tHRegister Hold Time 1.6 3.0 4.0 ns

tFSU Register Setup Time of Fast Input 2.4 3.0 2.0 ns

tFH Register Hold Time of Fast Input 0.6 0.5 1.0 ns

tRD Register Delay 1.1 2.0 1.0 ns

tCOMB Combinatorial Delay 1.1 2.0 1.0 ns

tIC Array Clock Delay 2.9 5.0 6.0 ns

tEN Register Enable Time 2.6 5.0 6.0 ns

tGLOB Global Control Delay 2.8 1.0 1.0 ns

tPRE Register Preset Time 2.7 3.0 4.0 ns

tCLR Register Clear Time 2.7 3.0 4.0 ns

tUIM Switch Matrix Delay 3.0 1.0 2.0 ns

tRPA Reduced Power Adder(2) 10 11 13 ns

AC Characteristics(1) ATF1516SE(L) (Continued)

Symbol Parameter

SE -7 SE -10 SEL -15(6)

UnitMin Max Min Max Min Max

ATF1516SE(L)

2401D–PLD–09/02

STAND-BY ICC VS.

SUPPLY VOLTAGE (TA=25°C)

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

(µA)

TBD

SUPPLY CURRENT VS.

INPUT FREQUENCY (VCC =5.0V,T

A= 25°C)

0.000

20.000

40.000

60.000

80.000

100.000

120.000

140.000

0.0 0.5 2.5 5.0 7.5 10.0 25.0 37.5 50.0

FREQUENCY (MHz)

(mA)

TBD

OUTPUT SOURCE CURRENT VS.

SUPPLY VOLTAGE (VOH =2.4V)

-50

-40

-30

-20

-10

4.0 4.5 5.0 5.5 6.0

SUPPLY VOLTAGE (V)

(mA)

TBD

OUTPUT SINK CURRENT VS.

SUPPLY VOLTAGE (VOL =0.5V)

4.0 4.5 5.0 5.5 6.0

SUPPLY VOLTAGE (V)

Iol (mA)

TBD

NORMALIZED ICC VS. TEMP

0.4

0.6

0.8

1.0

1.2

1.4

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED Icc

TBD

SUPPLY CURRENT VS.

INPUT FREQUENCY (VCC =5.0V,T

A= 25°C)

0.000

0.200

0.400

0.600

0.800

1.000

0.0 0.5 2.5 5.0 7.5 10.0 25.0 37.5 50.0

FREQUENCY (MHz)

(mA)

TBD

OUTPUT SOURCE CURRENT VS.

OUTPUT VOLTAGE (VCC =5.0V,TA= 25°C)

-90.0

-80.0

-70.0

-60.0

-50.0

-40.0

-30.0

-20.0

-10.0

0.0

0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00

VOH (V)

(mA)

TBD

OUTPUT SINK CURRENT VS.

OUTPUT VOLTAGE (VCC =5.0V,T

A=25°C)

0.0

20.0

40.0

60.0

80.0

100.0

120.0

140.0

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

SUPPLY VOLTAGE (V)

(mA)

TBD

52 ATF1516SE(L) 2401D–PLD–09/02

INPUT CLAMP CURRENT VS.

INPUT VOLTAGE (VCC =5.0V,TA=35°C)

-120

-100

-80

-60

-40

-20

0.0 -0.2 -0.4 -0.6 -0.8 -1.0

INPUT VOLTAGE (V)

INPUT CURRENT

(mA)

TBD

NORMALIZED TPD VS. VCC

0.8

0.9

1.0

1.1

1.2

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

NORMALIZED TCO VS. VCC

0.8

0.9

1.0

1.1

1.2

1.3

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

NORMALIZED TSU VS. VCC

0.8

0.9

1.0

1.1

1.2

4.5 4.8 5.0 5.3 5.5

SUPPLY VOLTAGE (V)

NORMALIZED T

TBD

INPUT CURRENT VS.

INPUT VOLTAGE (VCC =5.0V,TA= 25°C)

-30

-20

-10

0.0 1.0 2.0 3.0 4.0 5.0 6.0

INPUT VOLTAGE (V)

INPUT CURRENT

(uA)

TBD

NORMALIZED TPD VS.TEMP

0.8

0.9

1.0

1.1

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED T

TBD

NORMALIZED TCO VS.TEMP

0.8

0.9

1.0

1.1

-40.0 0.0 25.0 75.0

TEMPERATURE (V)

NORMALIZED T

TBD

NORMALIZED TSU VS.TEMP

0.8

0.9

1.0

1.1

1.2

-40.0 0.0 25.0 75.0

TEMPERATURE (C)

NORMALIZED T

TBD

ATF1516SE(L)

2401D–PLD–09/02

DELTA TPD VS.

OUTPUT LOADING

-2

0 50 100 150 200 250 300

OUTPUT LOADING (PF)

DELTA T

(ns)

TBD

DELTA TPD VS. # OF OUTPUT SWITCHING

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

NUMBER OF OUTPUTS SWITCHING

DELTA T

(ns)

TBD

DELTA TCO VS.

OUTPUT LOADING

0.00

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

50 100 150 200 250 300

NUMBER OF OUTPUTS LOADING

DELTA T

(ns)

TBD

DELTA TCO VS. # OF OUTPUT SWITCHING

-0.3

-0.2

-0.1

0.0

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

NUMBER OF OUTPUTS SWITCHING

DELTA T

(ns)

TBD

54 ATF1516SE(L) 2401D–PLD–09/02

ATF1516SE(L) Dedicated Pinouts

208-lead PQFP and RQFP – Top View

156

131

208

183

104

ATF1516SE(L)

2401D–PLD–09/02

OE (1,2) Global OE pins.

GCLR Global Clear pin.

GCLK (1,2,3) Global Clock pins.

TDI, TMS, TCK, TDO JTAG pins used for In System Programming or Boundary-scan Testing.

GNDINT Ground pins for the internal device logic.

GNDIO Ground pins for the I/O drivers.

VCCINT VCC pins for the internal device logic.

VCCIO VCC pins for the I/O drivers.

ATF1516SE(L) Dedicated Pinouts

Dedicated Pin 208-pin PQFP 208-pin RQFP

INPUT/GCLK1 184 184

INPUT/GCLR 182 182

INPUT/OE1 183 183

INPUT/OE2/GCK2 181 181

I/O/GCLK3 TBD TBD

I/O PD (1,2) TBD TBD

TDI (JTAG) 176 176

TMS (JTAG) 127 127

TCK (JTAG) 30 30

TDO (JTAG) 189 189

GNDINT 75, 82, 180, 185 75, 82, 180, 185

GNDIO 14, 32, 50, 72, 94, 116, 134, 152, 174,

200 14, 32, 50, 72, 94, 116, 134, 152, 174,

200

VCCINT 74, 83, 179, 186 74, 83, 179, 186

VCCIO 5, 23, 41, 63, 85, 107, 125, 143, 165, 191 5, 23, 41, 63, 85, 107, 125, 143, 165, 191

No Connect 1,2, 51, 52, 53, 54, 103, 104, 105, 106,

155, 156, 157, 158, 207, 208 1,2, 51, 52, 53, 54, 103, 104, 105, 106,

155, 156, 157, 158, 207, 208

# of Signal pins 164 164

# of User I/O pins 160 160

56 ATF1516SE(L) 2401D–PLD–09/02

ATF1516SE(L) I/O Pinouts

MC PLB 208-pin PQFP 208-pin RQRP MC PLB 208-pin PQFP 208-pin RQFP

1 A 153 153 33 C 108 108

2A - - 34C - -

3 A 154 154 35 C 109 109

4A - - 36C - -

5 A 159 159 37 C 110 110

6 A 160 160 38 C 111 111

7A - - 39C - -

8 A 161 161 40 C 112 112

9 A 162 162 41 C 113 113

10 A - - 42 C - -

11 A 163 163 43 C 114 114

12 A - - 44 C - -

13 A 164 164 45 C 115 115

14 A 166 166 46 C 117 117

15 A - - 47 C - -

16 A 167 167 48 C 118 118

17 B 141 141 49 D 92 92

18 B - - 50 D - -

19 B 142 142 51 D 93 93

20 B - - 52 D - -

21 B 144 144 53 D 95 95

22 B 145 145 54 D 96 96

23 B - - 55 D - -

24 B 146 146 56 D 97 97

25 B 147 147 57 D 98 98

26 B - - 58 D - -

27 B 148 148 59 D 99 99

28 B - - 60 D - -

29 B 149 149 61 D 100 100

30 B 150 150 62 D 101 101

31 B - - 63 D - -

32 B 151 151 64 D 102 102

ATF1516SE(L)

2401D–PLD–09/02

65 E 168 168 97 G 119 119

66 E - - 98 G - -

67 E 169 169 99 G 120 120

68 E - - 100 G - -

69 E 170 170 101 G 121 121

70 E 171 171 102 G 122 122

71 E - - 103 G - -

72 E 172 172 104 G 123 123

73 E 173 173 105 G 124 124

74 E - - 106 G - -

75 E 175 175 107 G 126 126

76 E - - 108 G - -

77 E 176 176 109 G 127 127

78 E 177 177 110 G 128 128

79 E - - 111 G - -

80 E 178 178 112 G 129 129

81 F 130 130 113 H 79 79

82 F - - 114 H - -

83 F 131 131 115 H 80 80

84 F - - 116 H - -

85 F 132 132 117 H 81 81

86 F 133 133 118 H 84 84

87 F - - 119 H - -

88 F 135 135 120 H 86 86

89 F 136 136 121 H 87 87

90 F - - 122 H - -

91 F 137 137 123 H 88 88

92 F - - 124 H - -

93 F 138 138 125 H 89 89

94 F 139 139 126 H 90 90

95 F - - 127 H - -

96 F 140 140 128 H 91 91

ATF1516SE(L) I/O Pinouts (Continued)

MC PLB 208-pin PQFP 208-pin RQRP MC PLB 208-pin PQFP 208-pin RQFP

58 ATF1516SE(L) 2401D–PLD–09/02

129 I 197 197 161 K 38 38

130 I - - 162 K - -

131 I 196 196 163 K 37 37

132 I - - 164 K - -

133 I 195 195 165 K 36 36

134 I 194 194 166 K 35 35

135 I - - 167 K - -

136 I 193 193 168 K 34 34

137 I 192 192 169 K 33 33

138 I - - 170 K - -

139 I 190 190 171 K 31 31

140 I - - 172 K - -

141 I 189 189 173 K 30 30

142 I 188 188 174 K 29 29

143 I - - 175 K - -

144 I 187 187 176 K 28 28

145 J 27 27 177 L 78 78

146 J - - 178 L - -

147 J 26 26 179 L 77 77

148 J - - 180 L - -

149 J 25 25 181 L 76 76

150 J 24 24 182 L 73 73

151 J - - 183 L - -

152 J 22 22 184 L 71 71

153 J 21 21 185 L 70 70

154 J - - 186 L - -

155 J 20 20 187 L 69 69

156 J - - 188 L - -

157 J 19 19 189 L 68 68

158 J 18 18 190 L 67 67

159 J - - 191 L - -

160 J 17 17 192 L 66 66

ATF1516SE(L) I/O Pinouts (Continued)

MC PLB 208-pin PQFP 208-pin RQRP MC PLB 208-pin PQFP 208-pin RQFP

ATF1516SE(L)

2401D–PLD–09/02

193 M 4 4 225 O 49 49

194 M - - 226 O - -

195 M 3 3 227 O 48 48

196 M - - 228 O - -

197 M 206 206 229 O 47 47

198 M 205 205 230 O 46 46

199 M - - 231 O - -

200 M 204 204 232 O 45 45

201 M 203 203 233 O 44 44

202 M - - 234 O - -

203 M 202 202 235 O 43 43

204 M - - 236 O - -

205 M 201 201 237 O 42 42

206 M 199 199 238 O 40 40

207 M - - 239 O - -

208 M 198 198 240 O 39 39

209 N 16 16 241 P 65 65

210 N - - 242 P - -

211 N 15 15 243 P 64 64

212 N - - 244 P - -

213 N 13 13 245 P 62 62

214 N 12 12 246 P 61 61

215 N - - 247 P - -

216 N 11 11 248 P 60 60

217 N 10 10 249 P 59 59

218 N - - 250 P - -

219 N 9 9 251 P 58 58

220 N - - 252 P - -

221 N 8 8 253 P 57 57

222 N 7 7 254 P 56 56

223 N - - 255 P - -

224 N 6 6 256 P 55 55

ATF1516SE(L) I/O Pinouts (Continued)

MC PLB 208-pin PQFP 208-pin RQRP MC PLB 208-pin PQFP 208-pin RQFP

60 ATF1516SE(L) 2401D–PLD–09/02

Using “C” Product for Industrial

To use commercial product for industrial temperature ranges, down-grade one speed grade from the “I” to the “C” device,

and de-rate power by 30%.

ATF1516SE(L) Ordering Information

tPD

(ns) tCO1

(ns) fMAX

(MHz) Ordering Code Package Operation Range

7.5 4.7 167 ATF1516SE-7 QC208

ATF1516SE-7 RC208 208Q1

208Q2 Commercial

(0°Cto70°C)

ATF1516SE-7 QI208

ATF1516SE-7 RI208 208Q1

208Q2 Industrial

(-40°Cto+85°C)

10 5.0 125 ATF1516SE-10 QC208

ATF1516SE-10 RC208 208Q1

208Q2 Commercial

(0°Cto70°C)

ATF1516SE-10 QI208

ATF1516SE-10 RI208 208Q1

208Q2 Industrial

(-40°Cto+85°C)

15 8.0 100 ATF1516SEL-15 QC208

ATF1516SEL-15 RC208 208Q1

208Q2 Commercial

(0°Cto70°C)

Package Type

208Q1 208-lead, 28 x 28 mm Body, 2.6 Form Opt., Plastic Quad Flatpack (PQFP)

208Q2 208-lead, 28 x 28 mm Body, 2.6 Form Opt., Plastic Quad Flatpack with Heat Spreader (PQFP)

ATF1516SE(L)

2401D–PLD–09/02

Package Information

44A – TQFP

2325 Orchard Parkway

San Jose, CA 95131

TITLE DRAWING NO.

REV.

44A, 44-lead, 10 x 10 mm Body Size, 1.0 mm Body Thickness,

0.8 mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP) B

44A

10/5/2001

PIN 1 IDENTIFIER

0˚~7˚

PIN 1

A1 A2 A

eE1 E

COMMON DIMENSIONS

(Unit of Measure = mm)

SYMBOL MIN NOM MAX NOTE

Notes: 1. This package conforms to JEDEC reference MS-026, Variation ACB.

2. Dimensions D1 and E1 do not include mold protrusion. Allowable

protrusion is 0.25 mm per side. Dimensions D1 and E1 are maximum

plastic body size dimensions including mold mismatch.

3. Lead coplanarity is 0.10 mm maximum.

A – – 1.20

A1 0.05 – 0.15

A2 0.95 1.00 1.05

D 11.75 12.00 12.25

D1 9.90 10.00 10.10 Note 2

E 11.75 12.00 12.25

E1 9.90 10.00 10.10 Note 2

B 0.30 – 0.45

C 0.09 – 0.20

L 0.45 – 0.75

e 0.80 TYP

62 ATF1516SE(L) 2401D–PLD–09/02

44J–PLCC

Notes: 1. This package conforms to JEDEC reference MS-018, Variation AC.

2. Dimensions D1 and E1 do not include mold protrusion.

Allowable protrusion is .010"(0.254 mm) per side. Dimension D1

and E1 include mold mismatch and are measured at the extreme

material condition at the upper or lower parting line.

3. Lead coplanarity is 0.004" (0.102 mm) maximum.

A 4.191 – 4.572

A1 2.286 – 3.048

A2 0.508 – –

D 17.399 – 17.653

D1 16.510 – 16.662 Note 2

E 17.399 – 17.653

E1 16.510 – 16.662 Note 2

D2/E2 14.986 – 16.002

B 0.660 – 0.813

B1 0.330 – 0.533

e 1.270 TYP

COMMON DIMENSIONS

(Unit of Measure = mm)

SYMBOL MIN NOM MAX NOTE

1.14(0.045) X 45° PIN NO. 1

IDENTIFIER

1.14(0.045) X 45°

0.51(0.020)MAX

0.318(0.0125)

0.191(0.0075)

45° MAX (3X)

B1 D2/E2

E1 E

44J, 44-lead, Plastic J-leaded Chip Carrier (PLCC) B

44J

10/04/01

2325 Orchard Parkway

San Jose, CA 95131

TITLE DRAWING NO.

REV.

ATF1516SE(L)

2401D–PLD–09/02

84J–PLCC

2325 Orchard Parkway

San Jose, CA 95131

TITLE DRAWING NO.

REV.

84J, 84-lead, Plastic J-leaded Chip Carrier (PLCC) B

84J

10/04/01

1.14(0.045) X 45° PIN NO. 1

IDENTIFIER

1.14(0.045) X 45°

0.51(0.020)MAX

0.318(0.0125)

0.191(0.0075)

45° MAX (3X)

B1 D2/E2

E1 E

COMMON DIMENSIONS

(Unit of Measure = mm)

SYMBOL MIN NOM MAX NOTE

Notes: 1. This package conforms to JEDEC reference MS-018, Variation AF.

2. Dimensions D1 and E1 do not include mold protrusion.

Allowable protrusion is .010"(0.254 mm) per side. Dimension D1

and E1 include mold mismatch and are measured at the extreme

material condition at the upper or lower parting line.

3. Lead coplanarity is 0.004" (0.102 mm) maximum.

A 4.191 – 4.572

A1 2.286 – 3.048

A2 0.508 – –

D 30.099 – 30.353

D1 29.210 – 29.413 Note 2

E 30.099 – 30.353

E1 29.210 – 29.413 Note 2

D2/E2 27.686 – 28.702

B 0.660 – 0.813

B1 0.330 – 0.533

e 1.270 TYP

64 ATF1516SE(L) 2401D–PLD–09/02

100A – TQFP

2325 Orchard Parkway

San Jose, CA 95131

TITLE DRAWING NO.

REV.

100A, 100-lead, 14 x 14 mm Body Size, 1.0 mm Body Thickness,

0.5 mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP) C

100A

10/5/2001

PIN 1 IDENTIFIER

0˚~7˚

PIN 1

A1 A2 A

eE1 E

A––1.20

A1 0.05 –0.15

A2 0.95 1.00 1.05

D 15.75 16.00 16.25

D1 13.90 14.00 14.10 Note 2

E 15.75 16.00 16.25

E1 13.90 14.00 14.10 Note 2

B 0.17 –0.27

C 0.09 –0.20

L 0.45 – 0.75

e 0.50 TYP

Notes: 1. This package conforms to JEDEC reference MS-026, Variation AED.

2. Dimensions D1 and E1 do not include mold protrusion. Allowable

protrusion is 0.25 mm per side. Dimensions D1 and E1 are maximum

plastic body size dimensions including mold mismatch.

3. Lead coplanarity is 0.08 mm maximum.

COMMON DIMENSIONS

(Unit of Measure = mm)

SYMBOL MIN NOM MAX NOTE

ATF1516SE(L)

2401D–PLD–09/02

100Q4 – PQFP

2325 Orchard Parkway

San Jose, CA 95131

TITLE DRAWING NO.

REV.

100Q4 A

3/29/02

100Q4, 100-lead, 14 x 20 mm Body, 3.2 Form Opt.,

Plastic Quad Flat Pack (PQFP)

Side View

Top View Bottom View

D1 D

A1 ebL1

COMMON DIMENSIONS

(Unit of Measure = mm)

SYMBOL MIN NOM MAX NOTE

A1 0.25 –0.50 5

A2 2.50 2.70 2.90

D 23.20 BSC 2

D1 20.00 BSC 3

E 17.20 BSC 2

E1 14.00 BSC 3

e 0.65 BSC

b 0.22 0.40 4

L1 1.60 REF

Notes: 1. This drawing is for general information only. Refer to JEDEC Drawing

MS-022, Variation GC-1, for additional information.

2. To be determined at seating plane.

3. Regardless of the relative size of the upper and lower body sections,

dimensions D1 and E1 are determined at the largest feature of the body

exclusive of mold Flash and gate burrs, but including any mismatch

between the upper and lower sections of the molded body.

4. Dimension b does not include Dambar protrusion. The Dambar

protrusion(s) shall not cause the lead width to exceed b maximum by more

than 0.08 mm. Dambar cannot be located on the lower radius or the lead

foot.

5. A1 is defined as the distance from the seating plane to the lowest

point of the package body.

66 ATF1516SE(L) 2401D–PLD–09/02

160Q1 – PQFP

2325 Orchard Parkway

San Jose, CA 95131

TITLE DRAWING NO.

REV.

160Q1 A

3/28/02

160Q1, 160-lead, 28 x 28 mm Body, 3.2 Form Opt.,

Plastic Quad Flat Pack (PQFP)

A1 bL1

Side View

Top View Bottom View

COMMON DIMENSIONS

(Unit of Measure = mm)

SYMBOL MIN NOM MAX NOTE

A1 0.25 –0.50 5

A2 3.20 3.40 3.60

D 31.20 BSC 2

D1 28.00 BSC 3

E 31.20 BSC 2

E1 28.00 BSC 3

e 0.65 BSC

b 0.22 –0.40 4

L1 1.60 REF

Notes: 1. This drawing is for general information only. Refer to JEDEC Drawing

MS-022, Variation DD-1, for additional information.

2. To be determined at seating plane.

3. Regardless of the relative size of the upper and lower body sections,

dimensions D1 and E1 are determined at the largest feature of the body

exclusive of mold Flash and gate burrs, but including any mismatch

between the upper and lower sections of the molded body.

4. Dimension b does not include Dambar protrusion. The Dambar

protrusion(s) shall not cause the lead width to exceed b maximum by more

than 0.08 mm. Dambar cannot be located on the lower radius or the lead

foot.

5. A1 is defined as the distance from the seating plane to the lowest point of

the package body.

ATF1516SE(L)

2401D–PLD–09/02

208Q1 – PQFP

2325 Orchard Parkway

San Jose, CA 95131

TITLE DRAWING NO.

REV.

208Q1 B

07/23/02

Side View

Bottom View

Top View

COMMON DIMENSIONS

(Unit of Measure = mm)

SYMBOL MIN NOM MAX NOTE

208Q1, 208-lead (28 x 28 mm Body, 2.6 Form Opt.),

Plastic Quad Flat Pack (PQFP)

A1 0.25

–

0.50

A2 3.20 3.40 3.60

D 30.60 BSC

D1 28.00 BSC 2, 3

E 30.60 BSC

E1 28.00 BSC 2, 3

e 0.50 BSC

b 0.17

–

0.27 4

L1 1.30 REF

Notes: 1. This drawing is for general information only; refer to JEDEC Drawing MS-129, Variation FA-1, for proper dimensions, tolerances, datums, etc.

2. The top package body size may be smaller than the bottom package size by as much as 0.15 mm.

3. Dimensions D1 and E1 do not include mold protrusions. Allowable protrusion is 0.25 mm per side. D1 and E1 are maximum plastic

body size dimensions including mold mismatch.

4. Dimension b does not include Dambar protrusion. Allowable Dambar protrusion shall not cause the lead width to exceed the maximum b

dimension by more than 0.08 mm. Dambar cannot be located on the lower radius or the foot. Minimum space between protrusion

and an adjacent lead is 0.07 mm.

68 ATF1516SE(L) 2401D–PLD–09/02

208Q2 – PQFP

2325 Orchard Parkway

San Jose, CA 95131

TITLE DRAWING NO.

REV.

208Q2 A

07/23/02

Side View

Bottom View

Top View

COMMON DIMENSIONS

(Unit of Measure = mm)

SYMBOL MIN NOM MAX NOTE

208Q2, 208-lead (28 x 28 mm Body, 2.6 Form Opt.),

Plastic Quad Flat Pack (PQFP)

A1 0.05

–

0.25

A2 3.20 3.40 3.60

D 30.60 BSC

D1 28.00 BSC 2, 3

E 30.60 BSC

E1 28.00 BSC 2, 3

e 0.50 BSC

b 0.17

–

0.27 4

L1 1.30 REF

Notes: 1. This drawing is for general information only; refer to JEDEC Drawing MS-129, Variation FA-2, for proper dimensions, tolerances, datums, etc.

2. The top package body size may be smaller than the bottom package size by as much as 0.15 mm.

3. Dimensions D1 and E1 do not include mold protrusions. Allowable protrusion is 0.25 mm per side. D1 and E1 are maximum plastic

body size dimensions including mold mismatch.

4. Dimension b does not include Dambar protrusion. Allowable Dambar protrusion shall not cause the lead width to exceed the maximum b

dimension by more than 0.08 mm. Dambar cannot be located on the lower radius or the foot. Minimum space between protrusion

and an adjacent lead is 0.07 mm.

Printed on recycled paper.

Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty

which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors

which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does

not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted

by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical

components in life support devices or systems.

Atmel Headquarters Atmel Operations

Corporate Headquarters

2325 Orchard Parkway

San Jose, CA 95131

TEL 1(408) 441-0311

FAX 1(408) 487-2600

Europe

Atmel Sarl

Route des Arsenaux 41

Case Postale 80

CH-1705 Fribourg

Switzerland

TEL (41) 26-426-5555

FAX (41) 26-426-5500

Asia

Room 1219

Chinachem Golden Plaza

77 Mody Road Tsimshatsui

East Kowloon

Hong Kong

TEL (852) 2721-9778

FAX (852) 2722-1369

Japan

9F, Tonetsu Shinkawa Bldg.

1-24-8 Shinkawa

Chuo-ku, Tokyo 104-0033

Japan

TEL (81) 3-3523-3551

FAX (81) 3-3523-7581

Memory

2325 Orchard Parkway

San Jose, CA 95131

TEL 1(408) 441-0311

FAX 1(408) 436-4314

Microcontrollers

2325 Orchard Parkway

San Jose, CA 95131

TEL 1(408) 441-0311

FAX 1(408) 436-4314

La Chantrerie

BP 70602

44306 Nantes Cedex 3, France

TEL (33) 2-40-18-18-18

FAX (33) 2-40-18-19-60

ASIC/ASSP/Smart Cards

Zone Industrielle

13106 Rousset Cedex, France

TEL (33) 4-42-53-60-00

FAX (33) 4-42-53-60-01

1150 East Cheyenne Mtn. Blvd.

Colorado Springs, CO 80906

TEL 1(719) 576-3300

FAX 1(719) 540-1759

Scottish Enterprise Technology Park

Maxwell Building

East Kilbride G75 0QR, Scotland

TEL (44) 1355-803-000

FAX (44) 1355-242-743

RF/Automotive

Theresienstrasse 2

Postfach 3535

74025 Heilbronn, Germany

TEL (49) 71-31-67-0

FAX (49) 71-31-67-2340

1150 East Cheyenne Mtn. Blvd.

Colorado Springs, CO 80906

TEL 1(719) 576-3300

FAX 1(719) 540-1759

Biometrics/Imaging/Hi-Rel MPU/

High Speed Converters/RF Datacom

Avenue de Rochepleine

BP 123

38521 Saint-Egreve Cedex, France

TEL (33) 4-76-58-30-00

FAX (33) 4-76-58-34-80

e-mail

literature@atmel.com

Web Site

http://www.atmel.com

2401D–PLD–09/02 xM

ATMEL®is the registered trademark of Atmel; Logic Doubling™is the trademark of Atmel.

Other terms and product names may be the trademarks of others.