F-219 USBR-A-S-F-O-TH USB-AM-S-F-W-TH USB-A-D-S-B-TH USB-A-S-F-B-VU USB-A, USBR-A, USB-AM SERIES STANDARD & RUGGED USB 2.0 SPECIFICATIONS Insulator Material: High Temperature Thermoplastic Contact Material: Phosphor Bronze Plating: Gold on Contacts, Nickel on Shell, Tin on Tails Operating Temp Range: -50 C to +85 C Voltage Rating: 30 VAC Cycles: 1500 (max tested) Packaging: Packaged and shipped in Bulk Packaging Trays; Trays suitable for automation available RoHS Compliant: Yes Lead-Free Solderable -TH & -VU=Yes (Wave Solder only) TID Numbers (USB-A): USB-A-D-X-X-TH (61001199) USB-A-S-X-X-TH (61001180) USB-A-S-X-X-SM2 (61001152) TID Number (USB-AM): USB-AM-S-X-X-SM (61001154) SHELL TYPE A TYPE For complete specifications and recommended PCB layouts see www.samtec.com?USB-A, www.samtec.com?USBR-A or www.samtec.com?USB-AM -S -F USB = Single USBR = Double (-TH option only) = Increased Retention Connector (Complies with Class 1, DIV II minimum withdrawal requirement of 15N.) TERMINATION -B = Gold Flash on Mating Area, Tin on Tails -D = Standard Connector COLOR PLATING -TH = Black (USB only) = Through-hole -W -S -SM2 = White (USB only) = 30 " (0.76 m) Gold on Mating Area, Tin on Tails = Surface Mount (USB only) -O = Orange (USBR only) -VU = Upright, Through-hole (12.50) .492 (16.40) .646 (6.90) .272 01 (5.72) .225 (5.12) .202 01 -SM2 (5.00) .197 (6.90) .272 (12.50) .492 01 (19.20) .756 (2.50) .098 (2.00) .079 (1.20) .047 DIA -TH 04 (5.12) .202 (13.62) .536 (14.50) .571 (2.84) .112 (10.40) .409 (14.22) .560 (15.49) .610 (5.12) .202 RECOGNITIONS (2.90) .114 (7.10) .280 For complete scope of recognitions see www.samtec.com/quality 04 01 (11.58) .456 -VU (2.00) .079 (7.00) .276 (2.50) .098 (3.00) .118 (4.42) .174 (2.00) .079 (10.72) .422 -D (Requires -TH) FILE NO. E111594 USB SHELL TYPE TYPE -S -AM = Single = A Type (Plug) -F (2.62) (2.87) .103 .113 = Black -S = White (14.60) .575 (17.60) .693 (2.00) .079 = 30 " (0.76 m) Gold on Mating Area, Tin on Tails TERMINATION -B = Gold Flash on Mating Area, Tin on Tails (18.70) .736 (4.50) .177 COLOR PLATING -TH = Through-hole -W -SM1 = Surface Mount (18.80) .740 (2.62) .103 (4.52) .178 (3.10) .122 (14.70) .579 (17.70) .697 (1.00) .039 DIA 01 01 (12.00) .472 (4.55) (7.00) .179 .276 (12.00) .472 (2.00) .079 (12.50) .492 (12.00) .472 (7.00) .276 (2.00) .079 (1.00) .039 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM (4.60) .181 (1.00) .039 DIA (2.00) .079 -SM1 (2.00) .079 -TH (1.45) .057 All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.