SBS(R) Connectors - up to 110 amps The patented SBS(R) connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits. This is of particular importance in applications where DC voltages exceed 30 volts and can be health threatening. SBS(R)75G SBS(R)75X Wire to Wire Wire-to-wire and wire-to-board configurations both provide power contacts rated up to 110 amps. The SBS(R)75X offers up to 4 mate-last break-first auxiliary power / signal contacts rated up to 20 amps. The SBS(R)75G features a third first-mate last-break ground or power contact. All contact positions are rated for circuit interruption (hot plugging). * Touch Safe Interface - Can safely be used in through panel applications - Minimizes potential contact with live circuits per IEC 60950 * Wire-to-Wire and Wire-to-Board Configurations Allows one connector to meet multiple needs SBS(R)50 * Ground or Auxiliary Positions Integrated into the One Piece Housing SBS(R)50 Standard Housings SECTION 3 | SBS(R) ORDERING INFORMATION | SBS(R) 50 & 75 Meets all connection requirements in one compact connector housing Polycarbonate housings feature 2 positions all finger proof. Genderless design mates with itself. Mechanical keys are color coded. Description Minimum Quantity ...... Red Gray Blue Black Brown White ----------- Part Numbers ----------500 50 ... SBS50RED-BK SBS50RED SBS50GRA-BK SBS50GRA SBS50BLU-BK SBS50BLU SBS50BLK-BK SBS50BLK SBS50BRN-BK SBS50BRN SBS50WHT-BK SBS50WHT [ 19.1 ] 0.75 [ 3.6 ] 0.14 (2) [ 6.3 ] 0.25 [ 36.1 ] 1.42 [ 18.0 ] 0.71 SBS(R)50 Chemical Resistant (CR) Housings Same features as the standard housings, but molded out of a chemical resistant PBT/ PC blend. Suitable for use to -40C. Description ------------ Part Numbers ------------Minimum Quantity ...... 500 50 ... Red PSBS50RED-BK PSBS50RED Gray PSBS50GRA-BK PSBS50GRA Blue PSBS50BLU-BK PSBS50BLU Green PSBS50GRN-BK PSBS50GRN Black PSBS50BLK-BK PSBS50BLK Brown PSBS50BRN-BK PSBS50BRN Material ID P = Chemical Resistant [ 55.8 ] 2.20 [ 16.5 ] 0.65 [84.8] 3.34 (c) 2018 Anderson Power Products, Inc. All rights reserved. APP(R), Anderson Power Products(R), A(R), SBS(R) and the APP Logo are registered trademarks of Anderson Power Products, Inc. All Data Subject To Change Without Notice www.andersonpower.com - 57 - SBS(R)75X Standard Housings Polycarbonate housings feature 4 auxiliary and 2 primary positions all finger proof. Genderless design mates with itself, or the PCB connector. Mechanical keys are color coded. Description Front View Primary Power Contacts ------------ Part Numbers ------------- Minimum Quantity ..... 250 Black SBS75XBLK-BK Brown SBS75XBRN-BK [ 15.2 ] 0.60 50 ... SBS75XBLK SBS75XBRN Pin SBS(R)75X Chemical Resistant (CR) Housings Socket Bottom View [ 28.9 ] 1.14 Same features as the standard housings, but molded out of a chemical resistant PBT/ PC blend. Suitable for use to -40C. Description [ 46.0 ] 1.81 ------------ Part Numbers -------------- [ 32.5 ] 1.28 [ 55.9 ] 2.20 Minimum Quantity ..... 250 50 .... Green PSBS75XGRN-BK Black PSBS75XBLK-BK PSBS75XBLK [ 84.8 ] 3.34 Mated Length [ 32.5 0.13 ] 0.750 0.005 Material ID P = Chemical Resistant SBS(R)75X Assembled PCB Connector Fully assembled PCB connector is designed to mate with SBS(R)75X Wire connector. All positions are preloaded with contacts including standard mating length auxiliary positions. Press fit board locks help secure the connector to the PCB before and after soldering. Description SBS(R) 50 & 75 Back View [ 15.7 ] 0.62 [ 46.1 ] 1.81 [ 4.1 ] 0.16 (4) [ 26.92 ] 1.06 [ 41.00 ] 1.614 [ 74.9 ] 2.95 ---- Part Number ----- Minimum Quantity ..... 100 ..... Black SBS75XPRBLK-BK SECTION 3 Mated Length Side View [ 4.0 ] 0.16 (4) [ 56.8 ] 2.24 See PCB connector drawing on website for further detail. SBS(R)75G Wire Housings Polycarbonate housings feature three finger proof positions. The center position can be used for pre-mate power or ground. Genderless design mates with itself, or the PCB connector. Mechanical keys are color coded. Inquire with customer service for chemical resistant housings. Description [ 46.0 ] 1.81 [ 15.2 ] 0.60 ----------- Part Numbers ------------- Minimum Quantity ..... 250 Blue SBS75GBLU-BK Black SBS75GBLK-BK Brown SBS75GBRN-BK White SBS75GWHT-BK 50 ..... SBS75GBLU SBS75GBLK SBS75GBRN SBS75GWHT [ 41.4 ] 1.63 [ 59.4 ] 2.34 Premate Ground / Power [ 28.9 ] 1.14 [ 14.5 ] 0.57 [ 84.8 ] 3.34 Mated Length Material ID P = Chemical Resistant SBS(R)75G Assembled PCB Connector Fully assembled PCB connector is designed to mate with SBS(R)75G Wire connector. Has press fit board locks to help secure the connector to the PCB before and after soldering. Description Back View [ 56.8 ] 2.24 ---- Part Number ---- Minimum Quantity ..... 100 ...... Black SBS75GPRBLK-BK [ 4.0 ] 0.16 TYP Side View [ 5.7 ] 0.62 [ 3.4 ] 0.13 TYP [ 49.6] 1.95 Mated Length [ 74.9 ] 2.95 [ 19.1 ] 0.75 See PCB connector drawing on website for further detail. - 58 - www.andersonpower.com All Data Subject To Change Without Notice SBS(R) Silver Plated Primary Power Wire Contacts Use two silver plated contacts per housing for the best electrical performance and durability up to 10,000 mating cycles. Standard contacts are for use in all [ 7.6 ] primary power positions for SBS(R) 50, 75X, & 75G wire housings. See reducing 0.30 bushings in accessory section for smaller wires. See reducing busings in accessory section for smaller wires. Dimensions Loose Piece - A Type AWG mm ------ Part Numbers ------ inches mm Minimum Quantity .................. 1,000 100 ................... Standard 6 16 1339G2-BK 1339G2* 0.22 5.59 Standard 8 10 1339G5-BK 1339G5* 0.19 4.83 Standard 12 to 10 2.5 to 6 1339G3-BK 1339G3* 0.14 3.56 * Are sold as pairs. 2 contacts ship for every 1 ordered. [ 39.4 ] 1.55 [ 12.4 ] 0.49 A [ 7.3 ] O 0.29 SBS(R)75G Silver Plated Pre-Mate Wire Contacts Ground Indicator Pre-Mate contacts are for the center Pre-Mate position on the SBS(R)75G wire housings. See reducing bushings in accessory section for smaller wires. [ 7.6 ] 0.30 Dimensions Loose Piece - A Type AWG mm ------ Part Numbers ------ inches mm Minimum Quantity .................. 500 50 ..................... Pre-Mate 6 16 1340G1-BK 1340G1 0.22 5.59 Pre-Mate 8 10 1340G2-BK 1340G2 0.19 4.83 Pre-Mate 12 to 10 2.5 to 6 1340G3-BK 1340G3 0.14 3.56 [ 41.9 +-1.5 ] 1.65 +-0.06 [ 12.4 ] 0.49 A [ 7.3 ] O 0.29 SECTION 3 SBS(R) 50 & 75 Pin Contacts for SBS(R)75X Auxiliary Gold plated contacts are available in 3 lengths to allow sequencing of circuits. Description AWG mm ----------------- Part Numbers ---------------Minimum Quantity .................................................... 500 50 ........... Standard Length 7.7mm 12 2.5 PM16P12S30 PM16P12S30-50 16 to 14 1.0 to 1.5 PM16P1416S30 PM16P1416S30-50 20 to 16 0.75 to 1.0 PM16P1620S30 PM16P1620S30-50 24 to 20 0.50 to 0.75 PM16P2024S30 PM16P2024S30-50 Pre-Mate 9.3mm 12 2.5 PM16P12A30 16 to 14 1.0 to 1.5 PM16P1416A30 20 to 16 0.75 to 1.0 PM16P1620A30 24 to 20 0.50 to 0.75 PM16P2024A30 Post-Mate 6.4mm 12 2.5 PM16P12C30 16 to 14 1.0 to 1.5 PM16P1416C30 20 to 16 0.75 to 1.0 PM16P1620C30 24 to 20 0.50 to 0.75 PM16P2024C30 - Retention Clip ID [ 1.60 ] O 0.06 L1 L Auxiliary Pin Contact Lengths Standard Length 7.7mm Pre-Mate 9.3mm Post-Mate 6.4mm - L - - L1 in. mm in. mm 0.77 19.6 0.30 7.7 0.83 21.2 0.37 9.3 0.72 18.3 0.25 6.4 Socket Contacts for SBS(R)75X Auxiliary Selectively gold plated contacts offer low resistance and durability up to 10,000 mating cycles. Description AWG mm -------------------- Part Numbers ------------------Minimum Quantity .................................. 500 50 ............. Socket Contact 12 2.5 PM16S12S32 PM16S12S32-50 ID 16 to 14 1.0 to 1.5 PM16S1416S32 PM16S1416S32-50 20 to 16 0.75 to 1.0 PM16S1620S32 PM16S1620S32-50 24 to 20 0.50 to 0.75 PM16S2024S32 PM16S2024S32-50 Auxiliary Socket Contacts [ 19.6 ] 0.77 Retention Clip Socket Insert [ 2.6 ] 0.10 Crimp Barrel ID Wire Gauge #24 / 20 #20 / 16 #16 / 14 #12 All Data Subject To Change Without Notice in. 0.04 0.07 0.08 0.10 mm. 1.1 1.7 2.1 2.6 www.andersonpower.com - 59 - | SBS(R) CONNECTOR SPECIFICATIONS | Electrical Current Rating Amperes UL 1977 CSA/TUV Primary Power (6 AWG) 110 75 Auxiliary (12 AWG) 20 10 Voltage Rating AC/DC UL 1977 600 Dielectric Withstanding Voltage Volts AC2,200 Avg. Mated Contact Resistance Milliohms Power & Ground: 1 1/4" of #6 AWG wire 0.200 Auxiliary: Wire & PCB 3.000 UL Hot Plug Current Rating Amperes - 250 cycles at 120V DC Wire & PCB Power 50A Wire & PCB Auxiliary 5A UL Ground Short Time Current Test - SBS75G Wire & PCB 1530 Amps, #6 AWG Wire 6 seconds SBS(R) 50 & 75 SECTION 3 Materials Housing Standard Plastic Resin Chem. Resistant Resin Contact Retention Spring Polycarbonate Polycarbonate / PBT blend Stainless Steel Housing Flammability Rating UL94 Glow Wire - SBS50 - SBS75G - SBS75X V-0 825C (GWFI) / 800C (GWIT) 960C (GWFI) / 800C (GWIT) 960C (GWFI) / 800C (GWIT) Wire Power & Ground Contact Silver Plated Copper Alloy PCB Power & Ground Contact Tin Plated Copper Alloy SBS75X Auxiliary Contacts Pin Socket Socket Body Retention Clip Copper alloy, Au over Ni BeCu, Au over Ni Copper alloy, Sn bright over Ni Stainless Steel PCB Press Fit Retainers Brass - Tin Plated Contact Termination Methods Crimp Hand Solder Solder Dip Wave Solder Wire Contacts Wire and PCB Contacts PCB Contacts PCB Contacts Mechanical Wire Size Range AWG mm Power Contacts (with bushings) 16 to 6 1.3 to 13.3 Auxiliary Contacts 24 to 12 0.25 to 3.3 Max. Wire Insulation Diameter in. mm 0.380 9.652 SBS(R)75G Power & Ground (R) (R) 0.410 10.414 SBS 50 & SBS 75X Power Contacts (R) 0.140 3.600 SBS 75X Auxiliary Contacts Operating Temperature F C Standard -4 to 221 -20 to 105 Chemical Resistant -40 to 221 -40 to 105 Mating Cycles No Load by Plating Silver (Ag) Tin (Sn) Gold (Au) Power & Ground Contacts Wire 10,000 Power & Ground Contacts PCB 1,500 Auxiliary Contacts 10,000 Avg. Mating / Unmating Force Lbf. N 16 70 SBS(R)75X and SBS(R)75G Wire to Wire (R) 8 36 SBS 50 Wire to Wire 8 36 SBS(R)75X and SBS(R)75G Wire to PCB Min. Contact / Spring Retention Force Lbf. N Power, Standard Housing 50 222 Power, Chem. Resistant Housing 30 133 Aux. Standard Housing 15 67 Aux. Chem. Resistant Housing 10 44 PCB Specifications Mounting Style Plated Through Hole Max PCB Thickness- in. [mm] 0.093 [2.4] Recommended Traces Power & Ground #6 AWG Cross Section Recommended Traces Auxiliary #12 AWG Cross Section Min. Creepage / Clearance Distance PCB in. mm 0.41 10.4 Power to Aux. Creepage SBS(R)75X (R) 0.24 6.1 Power to Aux. Clearance SBS 75X (R) 0.35 8.9 Power to Ground Creepage SBS 75G (R) 0.26 6.7 Power to Ground Clearance SBS 75G 0.12 3.0 Auxiliary Creepage SBS(R)75X (R) 0.12 3.0 Auxiliary Clearance SBS 75X Auxiliary contacts are available for SBS(R)75X only. SBS(R)75X and SBS(R)75G PCB connectors are designed to mate only with the wire connector of the same series. NOTE 1: See IEC 60664-1 for working voltage. NOTE 2: Amp ratings are stated per position and based on all positions being fully loaded. Based on: 105C rated or better cable of the largest size, Properly calibrated APP recommended tooling, and a 25C ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating below a 30C temperature rise. Limited by the thermal properties of the connector plastic housing. Use APP recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition. - 60 - www.andersonpower.com All Data Subject To Change Without Notice | IEC INFORMATION | Connector Series SBS(R)75G Connector Series SBS(R)50 Creepage/Clearance Material Configurations per IEC 60950-1 Group Unmated 3.33 mm Mated 4.64 mm IIIa SBS(R)75X Creepage/Clearance Material Configurations per IEC 60950-1 Group Unmated 3.85 mm Mated 4.64 mm IIIa Connector Series Creepage/Clearance Material Configurations per IEC 60950-1 Group Unmated 3.33 mm Mated 4.64 mm IIIa Protection Touch Safety with Wire Contacts & PCB Mating Interface IEC 60950 Pass IEC 60529 IP20 AMP Rating AC/DC - Power only Power Contacts and Aux contacts ( Aux contacts at 15 A) - Aux Contacts 6 AWGg-75a, 8 AWG 65A - 10 AWG - 45A, 12 AWG -35a 6 AWGg-75a, 8 AWG 60A - 10 AWG - 35A, 12 AWG -30a 12 AWG - 15A Voltage Rating AC/DC (Steady State) - Aux Contacts 600 AC/DC (Operational) NA Breaking Capacity -AMP Rating /Cycles - Power Contacts Breaking Capacity - Aux Contacts Voltage Rating (Breaking Capacity) Finger Safety - Mated only Wire Size tested Contact Series Tested - Aux contacts 6 AWG -50 Amp, 120 VDC / 250 Cycles NA 120 VDC IEC 60529 - IP20 Power 12, 10, 8, 6 AWG 1339G2, 1339G3, 1339G5 NA Climatic Testing (Cold,Heat & MFG) Cycle Life Mechanical Strength Impact Temperature Range IEC 60512 Test -11j, 11i & 11g, IEC 60512 Test 9a - 5000 Cycles IEC 60512-5 @ 29.5 Inches - dropped 8 times -20 C to 105 C -4 F to 221 F Attributes SBS75x AMP Rating AC/DC - Power only Power Contacts and Aux contacts ( Aux contacts at 15 A) - Aux Contacts 6 AWGg-75a, 8 AWG 65A - 10 AWG - 45A, 12 AWG -35a 6 AWGg-75a, 8 AWG 60A - 10 AWG - 35A, 12 AWG -30a 12 AWG - 15A Voltage Rating AC/DC (Steady State) - Aux Contacts 600V AC/DC ( Operational) 12 AWG - 15A Breaking Capacity -AMP Rating /Cycles - Power Contacts Breaking Capacity - Aux Contacts Voltage Rating (Breaking Capacity) Finger Safety - Mated only Wire Size tested Contact Series Tested - Aux contacts 6 AWG- 50 Amp, 120 VDC / 250 Cycles 12 AWG -5A, 120 VDC / 250 Cycles 120 VDC IEC 60529 - IP20 Power 12 AWG, 10 AWG , 8 AWG, 6AWG / signal 12 awg Power 1339G2, 1339G3, 1339G5 PM16P12S30, PM16S12S32 Climatic Testing (Cold,Heat & MFG) Cycle Life Mechanical Strength Impact Temperature Range IEC 60512 Test -11j, 11i & 11g, IEC 60512 Test 9a - 5000 Cycles IEC 60512-5 @ 29.5 Inches - dropped 8 times -20 C to 105 C -4 F to 221 F SECTION 3 SBS50 SBS(R) 50 & 75 Attributes NOTE 3: Refer to the Constructional Data form for additional information on our website., www.andersonpower.com All Data Subject To Change Without Notice www.andersonpower.com - 61 - SBS(R) 50 & 75 SECTION 3 Attributes SBS75G AMP Rating AC/DC - Power only Power Contacts and Aux contacts ( Aux contacts at 15 A) - Aux Contacts 110 NA NA Voltage Rating AC/DC (Steady State) - Aux Contacts 600V AC/DC ( Operational) NA Breaking Capacity -AMP Rating /Cycles - Power Contacts Breaking Capacity - Aux Contacts Voltage Rating (Breaking Capacity) Finger Safety - Mated only Wire Size tested Contact Series Tested - Aux contacts 6 AWG- 50 A, 120 VDC / 250 Cycles NA 120 VDC IEC 60529 - IP10, IP20 6 AWG Power 1339G2, 1339G3, 1339G5 / Ground 1340G1 NA Climatic Testing (Cold,Heat & MFG) Cycle Life Mechanical Strength Impact Temperature Range IEC 60512 Test -11j, 11i & 11g, IEC 60512 Test 9a - 1500 Cycles IEC 60512-5 @ 29.5 Inches - dropped 8 times -20 C to 105 C -4 F to 221 F Attributes SBS75G and GPR (PCB) AMP Rating AC/DC - Power only Power Contacts and Aux contacts ( Aux contacts at 15 A) - Aux Contacts 110 NA NA Voltage Rating AC/DC (Steady State) - Aux Contacts 600V AC/DC (Operational) NA Breaking Capacity -AMP Rating /Cycles - Power Contacts Breaking Capacity - Aux Contacts Voltage Rating (Breaking Capacity) Finger Safety - Mated only Wire Size tested Contact Series Tested - Aux contacts 6 AWG- 50 A,120 VDC / 250 Cycles NA 120 VDC IEC 60529 - IP20 6 AWG Power B02075P1 / Ground B02114P1 NA Climatic Testing (Cold,Heat & MFG) Cycle Life Mechanical Strength Impact Temperature Range IEC 60512 Test -11j, 11i & 11g, IEC 60512 Test 9a - 1500 Cycles NA -20 C to 105 C -4 F to 221 F NOTE 3: Refer to the Constructional Data form for additional information on our website., www.andersonpower.com - 62 - www.andersonpower.com All Data Subject To Change Without Notice | SBS(R) CONNECTOR TEMPERATURE CHARTS | Temperature rise charts are based on a 25C ambient temperature. For Temperature Rise Above 60C, Consult the Extended Temperature Rise Charts in the Appropriate Product Section on the Website. Current - Temperature Derating per IEC 60512-5-2 Test 5B 30 20 10 Amperes Applied 6 AWG 10 AWG 10 125.0 60 80 100 120 30 20 10 0 10 20 30 40 50 60 70 80 90 100 110 Amperes Applied 6 AWG 10 AWG All Data Subject To Change Without Notice 50.0 8 AWG 12 AWG 20 125.0 8 AWG 12 AWG 40 60 80 Amperes Applied 6 AWG SBS(R)75x Auxiliary Contacts @ 10A Derating vs. Ambient Temperature 6 AWG 10 AWG SBS(R)75x Auxiliary Contacts @ 20A Temperature Rise at Constant Current 40 0 8 AWG 12 AWG 75.0 8 AWG 12 AWG 50 0 140 10 AWG 100 120 12 AWG SBS(R)50 Derating vs. Ambient Temperature 125 100 75 50 25 0 20 40 60 80 100 120 140 Amperes Applied Amperes Applied Ambient Temperature (C) Temperature Rise Above Ambient (C) 40 25.0 0 10 20 30 40 50 60 70 80 90 100 110 0 10 20 30 40 50 60 70 80 90 100 110 6 AWG 10 AWG 20 Amperes Applied Amperes Applied 0 20 6 AWG 10 AWG Ambient Temperature (C) Temperature Rise Above Ambient (C) 20 30 10 100.0 30 40 SECTION 3 SBS(R)75x Auxiliary Contacts @ 10A Temperature Rise at Constant Current 40 60 50.0 8 AWG 12 AWG 50 0 75.0 50 SBS(R) 50 & 75 60 100.0 25.0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 SBS(R)50 Temperature Rise at Constant Current 60 Temperature Rise Above Ambient (C) 40 0 125.0 Ambient Temperature (C) Temperature Rise Above Ambient (C) 50 SBS(R)75x Primary Contacts Only Derating vs. Ambient Temperature Ambient Temperature (C) 60 SBS(R)75x Primary Contacts Only Temperature Rise at Constant Current 6 AWG 10 AWG 12 AWG SBS(R)75x Auxiliary Contacts @ 20A Derating vs. Ambient Temperature 100.0 75.0 50.0 25.0 0 10 20 30 40 50 60 70 80 90 100110 Amperes Applied 6 AWG 10 AWG 8 AWG 12 AWG www.andersonpower.com - 63 - For Temperature Rise Above 60C, Consult the Extended Temperature Rise Charts in the Appropriate Product Section on the Website. SBS(R)75G All Contacts Powered Temperature Rise at Constant Current 60 50 30 20 10 50 Temperature Rise Above Ambient (C) 40 0 60 50 Temperature Rise Above Ambient (C) Temperature Rise Above Ambient (C) 60 40 30 20 10 0 20 40 60 80 Amperes Applied 6 AWG 10 AWG 100 0 120 SBS(R)75G Primary Contacts Only No Power Center Contact Temperature Rise at Constant Current SBS(R)75GPR All Contacts Powered Temperature Rise at Constant Current 0 6 AWG 10 AWG 30 20 10 0 10 20 30 40 50 60 70 80 90 100 Amperes Applied 8 AWG 12 AWG 40 0 10 20 30 40 50 60 70 80 90 100 110 120 Amperes Applied 8 AWG 12 AWG 6 AWG 10 AWG 8 AWG 12 AWG Current - Temperature Derating per IEC 60512-5-2 Test 5B SBS(R)75G All Contacts Powered Derating vs. Ambient Temperature SBS(R) 50 & 75 SECTION 3 100 75 50 25 0 20 40 60 80 100 Amperes Applied 6 AWG 10 AWG 120 100 140 75 50 25 0 20 8 AWG 12 AWG 40 60 80 Amperes Applied 6 AWG 10 AWG 100 SBS(R)75G Primary Contacts Only No Power Center Contact Derating vs. Ambient Temperature 125 Ambient Temperature (C) 125 Ambient Temperature (C) Ambient Temperature (C) 125 SBS(R)75GPR All Contacts Powered Derating vs. Ambient Temperature 100 75 50 25 120 0 20 40 60 80 100 120 140 Amperes Applied 8 AWG 12 AWG 6 AWG 10 AWG 8 AWG 12 AWG | SBS(R) ACCESSORIES | Mounting Clamp for SBS(R)50 Mounting clamps can be used for fastening a SBS(R)50 series housings to a panel. Fastening hardware not included. Description --- Part Number --Minimum Quantity .......................... 20 sets of 2 ..... 1466G1 Panel Mount Bracket for SBS(R)50 [ 20.8 ] 0.82 [ 20.8 ] 0.82 [ 25.1 ] 0.99 [ 20.8 ] 0.82 [ 4.6 ] O 0.18 TYP [ 1.5 ] 0.06 [ 26.4 ] 1.04 [ 33.5 ] 1.32 [ 50.0 ] 1.97 [ 28.2 ] 1.11 T-Handle for SBS(R)50 and SBS(R)75X The "T" handle makes mating and unmating the connector easier. The non-conductive red plastic material is strong and safe. (2) Self tapping screws are used to secure the handle to the connector housing. Description ---------- Part Numbers ---------Minimum Quantity ............................... 1,000 50 .......... Red "T" Handle + Hardware Bag SBS50-HDL-RED Hardware Bag (2 Screws) 104G17 Red "T" Handle Only 113899P1 #8 x 5/8" Screw (Order 2 Per Handle) H1120P55 - 64 - www.andersonpower.com All Data Subject To Change Without Notice "A" frame handle for SBS(R)50 and SBS(R)75X Handle makes mating and unmating the connector easier. The non-conductive gray plastic material is strong and safe. Machine screws and locknuts included. Description Minimum Quantity ..................... Gray "A" Handle & Hardware Screws - Part Number 200 ....... Connector Housing Handle 997G1 Locknuts T-Handle for SBS(R)75G The "T" handle makes mating and unmating the connector easier. The non-conductive red plastic material is strong and safe. (2) Machine screws and lock nuts. Description Minimum Quantity .............................. Red "T" Handle + Hardware Bag - Part Number 50 .... SBS75GHDLRED Dust Cover SBS(R)50 Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal. Shown with the SB(R)50 Description ---- Part Number ---Minimum Quantity ............................. 500 50 ... Dust Cover with Lanyard Strap, Red 113890P1 134G1 Slide cover over mating end. SECTION 3 SBS(R) 50 & 75 Cable Clamps for SBS(R)50 Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. Cable Size AWG or mm or Description (Inches O.D.) (mm O.D.) ----- Part Numbers ----Minimum Quantity ......................................................................................... 500 50 ... Self Attaching for Discrete Conductor 8 to 6 10 990-BK 990 Self Attaching for Discrete Conductor 12 to 10 2.5 to 4 990G2-BK 990G2 Bolt On for Discrete Conductor 12 to 6 2.5 to 10 990G1-BK 990G1 Bolt On for Bundled Conductor (0.320 to 0.450) (4.27 to 11.43) 5905-BK 5905 5905 Shown with the SB(R)50 Bolt on bundled conductors. The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. 990 Self attaching discrete conductor. Cable Clamps for SBS(R)75X with Integral Handle Rugged chemical resistant PBT/ PC plastic cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. Cable Size AWG or mm or Description (Inches O.D.) (mm O.D.) Minimum Quantity ..................................................................................................... Large Wire Clamp Kit w/ Hardware 12 to 6 (0.39 to 0.60) 4 to 10 (9.9 to 15.2) Small Wire Clamp Kit w/ Hardware 12 to 6 (0.34 to 0.55) 4 to 10 (8.6 to 14.0) ------------------ Part Numbers ------------------100 25 ....... PSBS75XCLP1-BK PSBS75XCLP1 PSBS75XCLP2-BK PSBS75XCLP2 [ 21.8 ] 0.86 [ 48.3 ] 1.90 [ 36.4 ] 1.44 [ 55.5 ] 2.18 The given wire O.D. information is an estimate. Cable clamps should [ 45.9 ] be evaluated for performance with 1.81 the actual wire to be used. Clamp hardware requires phillips or flat blade screwdriver to assemble. All Data Subject To Change Without Notice www.andersonpower.com - 65 - Reducing Bushings Use with contact part number 1339G2-BK or 1340G1-BK to allow a smaller wire to be used with the connector. Electrical capability is derated with smaller wire. Dimensions - ID - Length Contact Barrel Size Wire Size -------- Part Numbers -------- inches mm inches mm Minimum Quantity ...................................................... 3,000 1,000 100 ..................................................... #6 AWG [13.3 mm] #8 AWG [8.4 mm] 5912-BK 5912 0.18 4.57 0.45 11.43 #6 AWG [13.3 mm] #12- 10 AWG [3.3- 5.3 mm] 5910-BK 5910 0.14 3.56 0.47 11.94 #6 AWG [13.3 mm] #16- 14 AWG [1.3- 2.1 mm] 5913-BK 5913 0.09 2.29 0.47 11.94 Length ID Wire Entrance SBS(R) - Tooling Information W ire Size Power / Ground Contacts AWG mm Power Contact Part Number #6 13.3 1339G2 #8 8.4 1339G5 #10 / 12 5.3 / 3.3 1339G3 #6 13.3 1340G1 #8 8.4 1340G2 #10 / 12 5.3 / 3.3 SBS(R) 50 & 75 SECTION 3 mm #12 / 24 2.5 / 0.25 Die 1388G6 1387G1 Locator Number of Crimps Hand Tool Single 1309G4 Number of Crimps Locator for: TM0001 & TP0001 1389G9 1388G7 1388G6 1389G20 1388G7 1340G3 W ire Size AWG Pneumatic Bench Tool SBS (R)75X Auxiliary Contacts Auxiliary Contact APP Hand Tool w/ Part Number Integral Locator All Crimp Pins Mil Std. Hand Tool* M22520/1-01 Pneumatic Tool* TM0001 TP0001 TL0001 PM1000G1 Single TL0002 All Crimp Sockets * TP0001 and TM0001 tools require locators TL0001 for Pins and TL0002 for Sockets. NOTE: See website for the most current information. SBS(R)75X Auxiliary Contact Insertion Tool: PM1002G1 SBS(R)75X Auxiliary Contact Extraction Tool: PM1003G1 SBS(R)75X Auxiliary Contact Insertion Inspection Tool: PM1003GX The auxiliary contacts used with wire sizes #16 - #24 AWG cannot be properly inserted without the insertion tool. Properly installed auxiliary contact of al wire gauges cannot be removed from the hosing without the extraction tool. - 66 - www.andersonpower.com 2018-0054 DS-SBS REV C6 All Data Subject To Change Without Notice