The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW 0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features Simple FPC insertion 1. Strong actuator retention Actuator will not be dislodged when operating under harsh conditions. 2. Rotating Flip-Lock actuator Rotating actuator permits easy insertion and retention of the FPC. Tactile sensation confirms complete FPC insertion and reliable mechanical and electrical connection. 3. FPC position hold Tabs on each side of the FPC assure correct placement and hold in the connector prior to closing of the actuator. 4. Standard FPC/FFC thickness Reliable connection with the use of the ready available 0.3 mm thick FFC/FPC. FPC positioning tab Lock 5. Easy solderability on the PC board The soldering leads are on 0.6 mm or 0.8 mm pitch, exiting on the front and back of the connector. 6. Board placement with automatic equipment Flat surface and packaging on the tape-and-reel allows use of vacuum nozzles. Standard reel contains 1,000 pieces. Applications Notebook computers, LCD, plasma display panels (PDP), HDD and other devices requiring FPC connections using reliable and strong multiple position connectors. Hard Disk-Drive PCB PCB PCB HDD PDP Notebook computers, LCD 2008.3 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please the products status actuator, on the Hirose Flexible website RoHSPrinted search at Circuit www.hirose-connectors.com, or contact your Hirose sales representative. FH30 Series0.3 or 0.4mm pitch, 3mm above thecheck board, Flip-Lock ZIF connectors Product Specifications 0.3 mm pitch 0.4 mm pitch Operating temperature range -40 to +85C (Note 2) Ratings Current rating(Note 1) Voltage rating Recommended FPC 0.3 A 0.15 A Operating humidity range 30 Vrms AC 50 Vrms AC (No condensation) Storage temperature range -10 to +50C (Note 3) Relative humidity 90% max. Storage humidity range (No condensation) Relative humidity 90% max. Thickness: 0.30.05, Gold plated contact pads Item 1. Insulation resistance 500 Mo min. Specification 2. Withstanding voltage No flashover or insulation breakdown Conditions 100 V DC 0.3 mm pitch: 90 Vrms AC / 1 minute 0.4mm pitch: 150 Vrms AC / 1 minute 150 mo max. * Including FPC conductor resistance Contact resistance: 150 mo max. No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer Contact resistance: 150 mo max. No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer Contact resistance: 150 mo max. No damage, cracks, or parts dislocation Contact resistance: 150 mo max. Insulation resistance: 50Mo min. No damage, cracks, or parts dislocation Contact resistance: 150 mo max. Insulation resistance: 50Mo min. No damage, cracks, or parts dislocation No deformation of components affecting performance. 3. Contact resistance 4. Durability 5. Vibration 6. Shock 7. Humidity (Steady state) 8. Temperature cycle 9. Resistance to soldering heat 1 mA AC 20 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm 10 cycles in each of the 3 directions Acceleration of 981m/s2, 6 ms duration, sine half-wave, 3 cycles in each of the 3 axis 96 hours at 40C and humidity of 90 to 95% Temperature: -40C +15C to 35C +85C +15C to 35C Time: -30 maximum 5 +30 +maximum 5 minutes 5 cycles Reflow: At the recommended temperature profile Manual soldering: 350C for 5 seconds Note1: When passing the current through all of the contacts, use 70% of the rated current. Note2: Includes temperature rise caused by current flow. Note3: The term "storage" refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of connectors after installation on a board. Materials Part Material Finish Remarks Insulator LCP Color: Gray/beige UL94V-0 Actuator LCP Color: Black UL94V-0 Contacts Phosphor bronze Gold flash -------------- Ordering information FH 30 M - 80S - 0.3 SHW (05) 1 2 3 4 5 6 q Series name : FH30 w Blank : 0.3mm pitch M : 0.4 mm pitch e Number of contacts : 80 r Contact pitch : 0.3 mm, 0.4 mm t Contact type : SHW(SMT horizontal staggered mounting) y Plating specifications(05): Gold flash plated (RoHS compliant) 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued,FH30 or will be discontinued soon. Please check the products on the Hirose website RoHS searchactuator, at www.hirose-connectors.com, or contact your ZIF Hiroseconnectors sales representative. Series0.3 or 0.4mm pitch, 3mm status above the board, Flip-Lock Flexible Printed Circuit Dimensions A B Q C R 9 (0.12) 6.55 Vacuum pick-up surface R (0.12) D 4.85 3 4.2 Vacuum pick-up surface ** 0.8 0.8 (E: FPC insertion slot dimension) Number of contacts indicator Notes 1: The coplanarity of each terminal lead is within 0.1. 2: Slight variations in color of the plastic compounds do not affect form ,fit or function of the connector. All dimensions: mm Part Number CL No. Number of Contacts FPC contact pitch A B C D E Q R FH30-80S-0.3SHW(05) 580-0100-4-05 80 0.3 27.9 23.7 23.4 23.4 24.35 0.3 0.6 FH30M-80S-0.4SHW(05) 580-0102-0-05 80 0.4 35.8 31.6 31.2 31.2 32.25 0.4 0.8 RoHS YES Tape and reel packaging (1,000 pieces/reel). Order by number of reels. 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please the products status actuator, on the Hirose Flexible website RoHSPrinted search at Circuit www.hirose-connectors.com, or contact your Hirose sales representative. FH30 Series0.3 or 0.4mm pitch, 3mm above thecheck board, Flip-Lock ZIF connectors BRecommended PCB mounting pattern and metal mask dimensions B0.05 3.950.1 1.70.1 Q0.05 0.30.03(Land) R0.05 0.250.03(Metal mask) Mark side 1.70.1 C0.05 R0.05 0.30.03(Land) 0.250.03(Metal mask) D0.05 Recommended metal mask thickness: t=0.15 BRecommended FPC Dimensions 0.3 0.10.05 A 0.070.07 No(n-1) No.1 .2 3.20.3 2 No (n) Q0.02 0.30.05 2 +0.04 0.3 -0.03 R0.02 0.30.07 B0.03 Detail A 0.30.07 0.05 MIN F0.05 G0.1 H MIN 00.1 0. No.2 R (0.8) (C 0. 5) 2.650.2 1.40.1 1.30.1 2.20.1 .2 4.20.3 (0.5) R0 R0 +0.04 -0.03 J0.1 Note 1 : Polyimide and thermally hardening adhesive is recommended as the materials for the stiffener. 2 : Conductor width shall be 0.10.05 if FPC has plating bars. All dimensions: mm Part Number 4 Q R FH30-80S-0.3SHW(05) 580-0100-4-05 CL No. Number of Contacts FPC contact pitch 80 0.3 23.7 23.4 23.4 24.3 24.8 25.3 26.3 B C D F G H J 0.3 0.6 FH30M-80S-0.4SHW(05) 580-0102-0-05 80 0.4 31.6 31.2 31.2 32.2 32.7 33.2 34.2 0.4 0.8 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued,FH30 or will be discontinued soon. Please check the products on the Hirose website RoHS searchactuator, at www.hirose-connectors.com, or contact your ZIF Hiroseconnectors sales representative. Series0.3 or 0.4mm pitch, 3mm status above the board, Flip-Lock Flexible Printed Circuit BPackaging Specifications Embossed Carrier Tape Dimensions (4.9) 1.750.1 20.15 120.1 0.40.1 1.5+0.1 0 (6.8) 1.350.1 L0.1 K0.3 1.7 +0.15 0 (N) M0.1 O1 0 .5 +0 . 1 40.1 Unreeling direction Reel Dimensions (T: INSIDE) 3) (O80) (O380) (O1 (U: OUTSIDE) End section Mounting section Lead section (400mm min.) Top cover tape Embossed carrier tape No connector inserted (10 pockets min.) No connector inserted (10 pockets min.) All dimensions: mm CL No. Number of Contacts K L M N T U FH30-80S-0.3SHW(05) 580-0100-4-05 80 44 40.4 20.2 28.1 45.4 49.4 FH30M-80S-0.4SHW(05) 580-0102-0-05 80 56 52.4 26.2 36 57.4 61.4 Part Number Tape and reel packaging (1,000 pieces/reel). 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please the products status actuator, on the Hirose Flexible website RoHSPrinted search at Circuit www.hirose-connectors.com, or contact your Hirose sales representative. FH30 Series0.3 or 0.4mm pitch, 3mm above thecheck board, Flip-Lock ZIF connectors BTemperature Profile Using Lead-free Solder Paste MAX 250c HRS test condition Solder method :Reflow, IR/hot air Environment :Room air 250 (Nihon Den-netsu Co., Ltd.'s Part Number:SENSBY NR-2) Temperature(c) 230c 200 200c Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part Number:M705-221CM5-42-10.5) Test board 150 150c 100 :Glass epoxy 45mm80mm1.6mm thick Land dimensions :0.3mm1.7mm Metal mask :0.251.70.15mm thick The temperature profiles shown are based on the above conditions. In individual applications the actual temperature may vary,depending on solder paste type, volume / thickness and board size / thickness. 50 25c (60 sec.) 0 Consult your solder paste and equipment manufacturer for specific 90 to 120 sec. Preheating Start Time (Seconds) 6 (30 sec.) Soldering recommendations. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued,FH30 or will be discontinued soon. Please check the products on the Hirose website RoHS searchactuator, at www.hirose-connectors.com, or contact your ZIF Hiroseconnectors sales representative. Series0.3 or 0.4mm pitch, 3mm status above the board, Flip-Lock Flexible Printed Circuit BFH30 Series Recommended FPC Construction 1. Using Single-sided FPC FPC : Flexible Printed Circuit Material Material Name Connecting side Covering film layer Polyimide Material Thickness (m) 25 1 mil thick 25 Cover adhesive Surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating Copper foil Cu 1oz Polyimide 1 mil thick 25 Reinforcement material adhesive Thermosetting adhesive 30 3 35 25 Base adhesive Base film Stiffener Polyimide 175 7 mil thick Total 293 Back side 2. Using Double-sided FPC FPC : Flexible Printed Circuit Material Name Connecting side Covering layer film Material Polyimide Material Thickness (m) 1 mil thick 25 Cover adhesive Surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating Through-hole copper Cu Copper foil Cu 1/2oz Polyimide 1 mil thick 25 18 Cu 1/2oz 18 25 Cover adhesive Back side 18 18 Base adhesive Copper foil 3 15 Base adhesive Base film 25 Covering film layer Polyimide 1 mil thick 25 Reinforcement material adhesive Thermosetting adhesive 50 Stiffener Polyimide 1 mil thick Total 100 297 * To prevent release of the FPC due to it's bending, use of the double-sided FPC with copper foil on the back side is NOT RECOMMENDED. 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please the products status actuator, on the Hirose Flexible website RoHSPrinted search at Circuit www.hirose-connectors.com, or contact your Hirose sales representative. FH30 Series0.3 or 0.4mm pitch, 3mm above thecheck board, Flip-Lock ZIF connectors BOperation and Precautions Operation and Precautions q Install on the PC board with the actuator open. e Actuator closing after the FPC is fully inserted. Rotate the actuator down to a full stop, pushing it at the center. w FPC Insertion Orient the FPC with the contact pads facing down. Insert in the connector at an angle, assuring that the positioning tabs are placed in the corresponding positioning tab areas on both sides of the insulator body. Lower the FPC to a position parallel to the mounting surface. Verify the correct position by slightly pulling horizontally on the FPC. Positioning tab area (each side) r Removing the FPC Carefully rotate the actuator up, lifting it at the center. Lift the FPC slightly to clear the positioning tabs and withdraw it from the connector. Positioning part 8 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued,FH30 or will be discontinued soon. Please check the products on the Hirose website RoHS searchactuator, at www.hirose-connectors.com, or contact your ZIF Hiroseconnectors sales representative. Series0.3 or 0.4mm pitch, 3mm status above the board, Flip-Lock Flexible Printed Circuit BPrecautions Operation and Precautions q Actuator operation The actuator rotates at the center of it's shaft, as illustrated in the figure below. w FPC Insertion and closing of the actuator. Do not insert the FPC on an angle as illustrated in the photograph below. Rotation shaft Be careful not to apply excessive force when operating the actuator from the open position (before the FPC has been inserted). Exercise care not to touch the contacts with fingernails or any other object. Properly insert the FPC positioning tabs into the corresponding areas on both sides of the insulator body. Incorrect FPC insertion Correct FPC insertion During the closing of the actuator do not pull up or push on it directly down. Do not grasp the actuator and pull on it (photograph below). e Make sure that the FPC/FFC does not rub against the insertion slot or the contacts, as illustrated on the figure below. 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please the products status actuator, on the Hirose Flexible website RoHSPrinted search at Circuit www.hirose-connectors.com, or contact your Hirose sales representative. FH30 Series0.3 or 0.4mm pitch, 3mm above thecheck board, Flip-Lock ZIF connectors Operation and Precautions Closing of the actuator. Rotate down pushing it at the center or evenly at each end, as shown on the photographs below. Do not push at one end only. r Opening of the actuator Rotate up, lifting it at the center or evenly at each end of the actuator. Do not lift at one end only. t Forces to the FPC/FFC after insertion and closing of the actuator. Do not apply upward pull-force to the FPC/FFC close to the connector. If a need arise to route the FPC/FFC upward, assure that it is NOT transferring any forces to the closed actuator. 10