Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
270
ZFE
Capacitance (µF)
Rated voltage mark
Series identification
Lot number
Negative polarity marking (–)
fd±0.05
L±1.0 14 min.
Pressure relief (010 and larger)
3 min. fD±0.5
F±0.5
+
–
● Endurance : 1000 h at 150 °C (High temperature)
● High temperature compared with ZC series
● High-withstand voltage (25 V to 63 V), Low LC (0.01 CV or 3 F)
● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor
(There are little characteristics change by temperature and frequency)
● AEC-Q200 compliant
● RoHS compliant
Features
Marking
Radial Lead Type
Series : ZF Type : A
Example : 25 V.DC 270 µF
Marking color : BLACK
Size code FG
Category temp. range –55 °C to +150 °C
Rated voltage range 25 V.DC to 63 V.DC
Nominal cap.range 33 µF to 150 µF 56 µF to 270 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
DC leakage cur rent I < 0.01 CV or 3 (µA) After 2 minutes (whichever is greater)
Dissipation factor (tan d)
Please see the attached standard products list
Endurance
+150 °C±2 °C, 1000 h, apply the rated ripple current without exceeding the rated voltage
Capacitance change Within ±30% of the initial value
tan d< 200 % of the initial limit
E. S. R. < 200 % of the initial limit
DC leakage current Within the initial limit
ESR after Endurance
(Ω/100 kHz) (–40 °C)
Size code
FG
0.4 0.3
Shelf life After storage for 1000 hours at +150 °C±2 °C with no voltage applied and then being stabilized at
+20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Damp heat (Load)
+85 °C±2 °C, 85 % to 90 %, 2000 h, rated voltage applied
Capacitance change Within ±30% of the initial value
tan d< 200 % of the initial limit
E. S. R. < 200 % of the initial limit
DC leakage current Within the initial limit
Rated voltage mark
E 25 V.DC
V 35 V.DC
H 50 V.DC
J 63 V.DC
(Unit : mm)
Size code fDLfdF
F 8.0 9.5 0.6 3.5
G10.0 9.5 0.6 5.0
Dimensions (not to scale)
Speci cations
Jun. 201800
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Standard products
Frequency correction factor for ripple current
Rated capacitance Frequency 100 Hz < f < 200 Hz 200 Hz < f < 300 Hz 300 Hz < f < 500 Hz 500 Hz < f < 1 kHz
C < 47 µF Correction
factor
0.10 0.10 0.15 0.20
47 µF < C < 150 µF 0.15 0.20 0.25 0.30
150 µF < C 0.15 0.25 0.25 0.30
Rated capacitance Frequency 1 kHz < f < 2 kHz 2 kHz < f < 3 kHz 3 kHz < f < 5 kHz 5 kHz < f < 10 kHz
C < 47 µF Correction
factor
0.30 0.40 0.45 0.50
47 µF < C < 150 µF 0.40 0.45 0.55 0.60
150 µF < C 0.45 0.50 0.60 0.65
Rated capacitance Frequency 10 kHz < f < 15 kHz 15 kHz < f < 20 kHz 20 kHz < f < 30 kHz 30 kHz < f < 40 kHz
C < 47 µF Correction
factor
0.60 0.65 0.70 0.75
47 µF < C < 150 µF 0.70 0.75 0.80 0.80
150 µF < C 0.75 0.80 0.85 0.85
Rated capacitance Frequency 40 kHz < f < 50 kHz 50 kHz < f < 100 kHz
100 kHz < f < 500 kHz
500 kHz
< f
C < 47 µF Correction
factor
0.80 0.85 1.00 1.05
47 µF < C < 150 µF 0.85 0.90 1.00 1.00
150 µF < C 0.85 0.90 1.00 1.00
Endurance : 150 °C 1000 h
Rated
voltage
(V.DC)
Capacitance
(±20 %)
(µF)
Case size (mm)
Size
code
Specifi cation
Part number
Min.
packaging q'ty
fDL
Ripple
current
(100 kHz)
(+150 °C)
(mA r.m.s.)
E.S.R.
(100 kHz)
(+20 °C)
(mΩ)
tan d
(120 Hz)
(+20 °C)
Long lead
(pcs)
25 150 8 9.5 F 800 27 0.14 EEHAZF1E151 200
270 10 9.5 G 1000 20 0.14 EEHAZF1E271 200
35 100 8 9.5 F 770 30 0.12 EEHAZF1V101 200
150 10 9.5 G 950 23 0.12 EEHAZF1V151 200
50 56 8 9.5 F 700 35 0.10 EEHAZF1H560 200
100 10 9.5 G 900 28 0.10 EEHAZF1H101 200
63 33 8 9.5 F 650 40 0.08 EEHAZF1J330 200
56 10 9.5 G 840 30 0.08 EEHAZF1J560 200
Jun. 201800
