High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
P
Vishay Sfernice
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 53017
60 Revision: 14-Nov-08
For low noise and precision applications, superior stability,
low temperature coefficient of resistance, and low voltage
coefficient, VISHAY SFERNICE’s proven precision
thin film wraparound resistors exceed requirements of
MIL-PRF-55342G characteristics Y ± 10 ppm/°C (- 55 °C;
+ 155 °C) down to ± 5 ppm/°C (- 25 °C; + 85 °C).
FEATURES
•Load life stability at ± 70 °C for 2000 h:
0.1 % under Pn/0.05 % under Pd
•Low temperature coefficient down to 5ppm/°C
(- 25 °C; + 85 °C)
•Very low noise < 35 dB and voltage coefficient
< 0.01 ppm/V
•Wide resistance range: 10 Ω to 50 MΩ depending on size
•Tolerances to ± 0.01 %
•In lot tracking ≤ 5 ppm/°C
•Termination: thin film technology
•Gold plated or pre-tinned terminations over nickel barrier
•Short circuits (jumpers) r < 50 mR, I < 2 A
DIMENSIONS in millimeters [inches]
Notes
(1) Pn = nominal power - Pd = derated power intended to improve stability
(2) For ohmic range versus tolerance and TCR see detailed table page 2
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Green and Halogen-Free Definitions (5-2008)”: http://www.vishay.com/doc?99902
A
D
D
C
E
E
B
CASE
SIZE
DIMENSION
POWER RATING LIMITING
ELEMENT
VOLTAGE
V
RESISTANCE
RANGE (2)
ABCD/E
MAX. TOL.
+ 0.152 [+ 0.006]
MIN. TOL.
- 0.152 [- 0.006]
MAX. TOL.
+ 0.127 [+ 0.005]
MIN. TOL.
- 0.127 [- 0.005]
MAX. TOL.
+ 0.127 [+ 0.005]
MIN. TOL.
- 0.127 [- 0.005]
MAX. TOL.
+ 0.13 [+ 0.005]
MIN. TOL.
- 0.13 [- 0.005]
mW
Pn (1) Pd (1)
0302 0.75 [0.029] 0.60 [0.023] 0.5 [0.02] 0.38 [0.015] 40 30 25 10 Ω - 500 kΩ
0402 1.00 [0.040] 0.60 [0.023] 0.5 [0.02] 0.38 [0.015] 63 40 50 10 Ω - 1 MΩ
0505 1.35 [0.053] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 125 50 50 10 Ω - 2.5 MΩ
0603 1.52 [0.060] 0.75 [0.030] 0.5 [0.02] 0.38 [0.015] 125 100 75 10 Ω - 2.5 MΩ
0705/0805 1.91 [0.075] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 200 125 150 10 Ω - 5 MΩ
1005 2.54 [0.100] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 250 125 75 10 Ω - 5 MΩ
1206 3.06 [0.120] 1.60 [0.063] 0.5 [0.02] 0.38 [0.015] 330 250 200 10 Ω - 15 MΩ
1505 3.81 [0.150] 1.32 [0.054] 0.5 [0.02] 0.38 [0.015] 350 175 75 10 Ω - 10 MΩ
2010 5.08 [0.200] 2.54 [0.100] 0.5 [0.02] 0.38 [0.015] 1000 500 300 10 Ω - 50 MΩ
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors Vishay Sfernice
Document Number: 53017 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 14-Nov-08 61
ELECTRICAL SPECIFICATIONS
Resistance Range: 10 Ω to 50 MΩ
Resistance Tolerance: ± 0.1 % to ± 1 %
± 0.01 % to ± 0.05 % on Y type
Power Dissipation: Pn: 40 mW to 1 W
Pd: 40 mW to 500 mW
on tolerance tighter than ± 0.05 %
Temperature Coefficient: 5 ppm (0 °C; 70 °C);
10 ppm (- 55 °C; + 155 °C)
CLIMATIC SPECIFICATIONS
Operating Temp. Range: - 55 °C to + 155 °C
For temperature up to 200 °C, please consult factory
MECHANICAL SPECIFICATIONS
Substrate: Alumina
Technology: Thin film
Film: Nickel chromium with mineral
passivation or CrSi
Protection: Silicone
Terminations: B type: SnPb over nickel barrier
for solder reflow
N type: SnAg over nickel barrier
G type: gold over nickel barrier
for other applications
Notes
(1) Reduced operating range: 0 °C; + 70 °C option available for
(- 25 °C; + 85 °C)
(2) R > 50 Ω on request for lower values
POWER DERATING CURVE
TOLERANCE AND TCR VERSUS OHMIC
VALUE
Note
(3) 5 ppm/°C in a reduced operating range (0 °C; + 70 °C). Option
available for operating range (- 25 °C; + 85 °C) upon request with
price adder
TEMPERATURE COEFFICIENT
TCR CODE FILM
± 5 ppm/°C (1) ZNiCr
± 10 ppm/°C (2) YNiCr
± 25 ppm/°C E NiCr
± 50 ppm/°C H NiCr or CrSi
± 100 ppm/°C K NiCr or CrSi
07020 40 60 80 100 120 140 155
0
20
40
60
80
100
Ambient Temperature in °C
Rated Power (%)
SIZE VALUE
RANGE
TIGHTEST
TOLERANCE
%
BEST TCR
(ppm/°C)
P0302
10R - 500K 0.1 50
10R - 75K 0.1 25
39R - 75K 0.05 25
39R - 50K 0.05 10 (5) (3)
100R - 50K 0.02 10 (5) (3)
250R - 50K 0.01 10 (5) (3)
P0402
10R - 1M 0.1 50
10R - 150K 0.1 25
39R - 150K 0.05 25
39R - 100K 0.05 10 (5) (3)
100R - 100K 0.02 10 (5) (3)
250R - 100K 0.01 10 (5) (3)
P0505
10R - 2M5 0.1 50
10R - 300K 0.1 25
39R - 300K 0.05 25
39R - 260K 0.05 10 (5) (3)
100R - 260K 0.02 10 (5) (3)
250R - 260K 0.01 10 (5) (3)
P0603
10R - 2M5 0.1 50
10R - 500K 0.1 25
39R - 500K 0.05 25
39R - 332K 0.05 10 (5) (3)
100R - 332K 0.02 10 (5) (3)
250R - 332K 0.01 10 (5) (3)
P0705/0805
10R - 5M 0.1 50
10R - 750K 0.1 25
39R - 750K 0.05 25
39R - 511K 0.05 10 (5) (3)
100R - 511K 0.02 10 (5) (3)
250R - 511K 0.01 10 (5) (3)
P1005
10R - 5M 0.1 50
10R - 750K 0.1 25
39R - 750K 0.05 25
39R - 500K 0.05 10 (5) (3)
100R - 500K 0.02 10 (5) (3)
250R - 500K 0.01 10 (5) (3)
P1206
10R - 15M 0.1 50
10R - 2M 0.1 25
39R - 2M 0.05 25
39R - 1M5 0.05 10 (5) (3)
100R - 1M5 0.02 10 (5) (3)
250R - 1M5 0.01 10 (5) (3)
P1505
10R - 10M 0.1 50
10R - 1M 0.1 25
39R - 1M 0.05 25
39R - 750K 0.05 10 (5) (3)
100R - 750K 0.02 10 (5) (3)
250R - 750K 0.01 10 (5) (3)
P2010
10R - 50M 0.1 50
10R - 6M 0.1 25
39R - 6M 0.05 25
39R - 3M 0.05 10 (5) (3)
100R - 3M 0.02 10 (5) (3)
250R - 3M 0.01 10 (5) (3)
P
Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 53017
62 Revision: 14-Nov-08
PACKAGING
ESD packaging available: waffle-pack, and plastic tape and
reel (low conductivity).
Note
(1) 12 mm on request
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the top
of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay/Sfernice for specific ordering
code
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay/Sfernice for specific ordering code
Note
(2) 0.05 % under Pd
SIZE MOQ
NUMBER OF PIECES PER PACKAGE
TAPE
WIDTH
WAFFLE PACK
2" × 2"
TAPE AND REEL
MIN. MAX.
0302
100
100
100 4000 8 mm
0402
0505
0603
0805
0705
1005 221
1206 140
1505
60
2010 100 2000 8 mm (1)
PERFORMANCE
TESTS CONDITIONS
Ta2N DRIFTS NiCr
MIL-PRF-55342G
requirements
Ty p i c al
performances MIL-PRF-55342G Ty p i c a l
performances
Thermal Shock MIL-PRF-55342G
MIL-STD-202 F-Method 107 F ± 0.25 % ± 0.02 % ± 0.05 % ± 0.02 %
Short Time Overload MIL-PRF-55342G
PARA 3.10.4.7.5 ± 0.10 % ± 0.01 % ± 0.05 % ± 0.01 %
Low Temperature Operation MIL-PRF-55342G
PARA 3.9 and 4.7.4 ± 0.25 % ± 0.01 % ± 0.05 % ± 0.01 %
Resistance to Solder Heat MIL-PRF-55342G
PARA 3.12, 4.7.7, 4.7.1.2 ± 0.25 % ± 0.04 % ± 0.05 % ± 0.03 %
Moisture Resistance
MIL-PRF-55342G
PARA 3.13 and 4.7.8
MIL-STD-202 F-Method 106 E
± 0.40 % ± 0.01 % ± 0.10 % ± 0.01 %
High Temperature MIL-PRF-55342G
PARA 3.11 and 4.7.6 ± 0.20 % ± 0.075 % ± 0.05 % ± 0.05 %
Load Life
MIL-PRF-55342G
2000 h Pn at 70 °C
MIL-STD-202 F-Method 108 A
± 0.50 % ± 0.15 % ± 0.5 % ± 0.10 % (2)
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors Vishay Sfernice
Document Number: 53017 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 14-Nov-08 63
Note
• Chips ready to be trimmed available. (Ptrim) - Please consult Sfernice.
(1) For specific quantity of parts per packaging please consult Sfernice
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P0505Y1003BBT0933
GLOBAL
MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION
P 0302
0402
0505
0603
0705
0805
1005
1206
1505
2010
K = ± 100
ppm/°C
H = ± 50 ppm/°C
E = ± 25 ppm/°C
Y = ± 10 ppm/°C
X = Jumper
Z = ± 5 ppm
(0.70 °C)
The first three digits (2
digits are enough for
tolerance G and J) are
significant figures and
the last digit specifies
the number of zeros to
follow, R designates
decimal point
10R0 = 10 Ω
3901 = 3900 Ω
1004 = 1 MΩ
0R00 = Jumper
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
S = Special
X = Jumper
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
blank =
Waffle pack
T = Tape (1)
Leave
blank if no
option
B: Lead bearing version
N and G: Lead (Pb)-free/
RoHS version
Historical Part Number example: P 0505 Y 1003 B B TR R0933 e2
P 0505 Y 1003 B B TR R0933 e2
HISTORICAL
MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION RoHS
P 0302
0402
0505
0603
0705
0805
1005
1206
1505
2010
K = ± 100
ppm/°C
H = ± 50 ppm/°C
E = ± 25 ppm/°C
Y = ± 10 ppm/°C
X = Jumper
Z = ± 5 ppm
(0.70 °C)
The first three digits (2
digits are enough for
tolerance G and J) are
significant figures and
the last digit specifies
the number of zeros to
follow, R designates
decimal point
10R0 = 10 Ω
3901 = 3900 Ω
1004 = 1 MΩ
0R00 = Jumper
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
S = Special
X = Jumper
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
blank =
Waffle pack
TR = Tape
(1)
Leave blank
if no option
e2:
Tin/silver
e4:
Gold
blank:
SnPb
B: Lead bearing version
N and G: Lead (Pb)-free/
RoHS version
0505Y1003PBBT 0 9 33
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
