Ordering Information
Specify part number followed by
Option Number (if desired).
CNY17-3-XXXE
Lead Free
Option Number
000 = No Options
060 = IEC/EN/DIN EN 60747-5-2
Option
W00 = 0.4" Lead Spacing Option
300 = Lead Bend SMD Option
500 = Tape and Reel Packaging
Option
Agilent CNY17-x
Phototransistor Optocoupler
High Collector-Emitter
Voltage Type
Data Sheet
Features
• High collector-emitter voltage
(VCEO = 70 V)
• High input-output isolation voltage
(Viso = 5000 Vrms)
• Current Transfer Ratio
(CTR: min. 40% at IF = 10 mA,
VCE = 5 V)
• Response time (tr: typ., 5 µs at
VCC = 10 V, IC = 2 mA, RL = 100 Ω)
• Dual-in-line package
• UL approved
• CSA approved
• IEC/EN/DIN EN 60747-5-2 approved
• Options available:
– Leads with 0.4" (10.16 mm)
spacing (W00)
– Leads bends for surface
mounting (300)
– Tape and reel for SMD (500)
– IEC/EN/DIN EN 60747-5-2
approvals (060)
Applications
• System appliances, measuring
instruments
• Signal transmission between
circuits of different potentials and
impedances
• Feedback circuit in power supply
Description
The CNY17 contains a light emitting
diode optically coupled to a photo-
transistor. It is packaged in a 6-pin
DIP package and available in wide-
lead spacing option and lead bend
SMD option. Collector-emitter
voltage is above 70 V. Response
time, tr, is typically 5 µs and
minimum CTR is 40% at input
current of 10 mA.
Functional Diagram
Schematic
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
654
123
PIN NO. AND INTERNAL
CONNECTION DIAGRAM
1. ANODE
2. CATHODE
3. NC
4. EMITTER
5. COLLECTOR
6. BASE
1
2
ANODE
CATHODE
V
F
+
–
I
F
6
5
4
BASE
COLLECTOR
EMITTER
I
C