Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
•INFO@ARIESELEC.COM
WWW.ARIESELEC.COM
FEATURES
• A strong, metal cam activates the normally closed contacts, preventing dependency
on plastic for contact force
• The handle can be provided on right or left hand side
• Consult factory for special handle requirements
• Any footprint accepted on standard 13x13 to 21x21 grid
GENERAL SPECIFICATIONS
• SOCKET BODY: black UL 94V-0 Polyphenylene Sulfide (PPS)
•CONTACTS: BeCu 174, 1/2-hard or Spinodal
• BeCu CONTACT PLATING OPTIONS: “2” 30μ [0.762μ] min. Au per MIL-G-45204
on contact area, 200μ [5.08μ] min. matte Sn per ASTM B545-97 on solder tail,
both over 30μ [0.762μ] min. Ni per QQ-N-290 all over. Consult factory for other
plating options not shown
• SPINODAL PLATING CONTACT ONLY: “6”: 50μ [1.27μ] min. NiB
•HANDLE: Stainless Steel
• CONTACT CURRENT RATING: 1 amp
•OPERATING TEMPERATURES: -85°F to
257°F [-65°C to 125°C] Au plating, -85°F
to 392°F [-65°C to 200°C] NiB (Spinodal)
• ACCEPTS LEADS: 0.014-0.026 [0.36-
0.66] dia., 0.120-0.290 [3.05-7.37] long
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.032
±0.002 [0.81 ±0.05] dia.
• See PCB footprint below
• Plugs into standard PGA sockets
ZIF PGA Test & Burn-in Socket for
Any Footprint on Std 13x13 to 21x21 Grid
10004
Rev. AC
1 of 2
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ORDERING INFORMATION
XXX-PXX XXXXX-1 X
Plating
2 = Au Contacts, Sn over Ni Tail
6 = NiB Spinodal Pin Only
CONSULT FACTORY FOR MINIMUM ORDERING
QUANTITY AS WELL AS AVAILABILITY OF THIS
PIN
Solder Pin Tail
No. of Pins
Series Designator
PRS = Std
PLS = Handle of Left
Grid Size & Footprint No.
Grid Size No. of Pins Dim. “C” Dim. “A” Dim. “B” Dim. “D”
12 x 12*144 1.100 [27.94] 1.894 [48.10] 1.510 [38.35] 1.675 [42.54]
13 x 13 169 1.200 [30.48]
14 x 14*196 1.300 [33.02] 2.094 [53.20] 1.710 [43.43] 1.875 [47.62]
15 x 15 225 1.400 [35.56]
16 x 16*256 1.500 [38.10] 2.294 [58.26] 1.910 [48.51] 2.075 [52.70]
17 x 17 289 1.600 [40.64]
18 x 18*324 1.700 [43.18] 2.494 [63.34] 2.110 [53.59] 2.275 [57.78]
19 x 19 361 1.800 [45.72]
20 x 20*400 1.900 [48.26] 2.694 [68.42] 2.310 [58.67] 2.475 [62.86]
21 x 21 441 2.000 [50.80]
* Top and Right-hand Side Row left out
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
•INFO@ARIESELEC.COM
WWW.ARIESELEC.COM
ZIF PGA Test & Burn-in Socket for
Any Footprint on Std 13x13 to 21x21 Grid
SPECIAL FOOTPRINT INSTRUCTIONS
1. Make a copy of this sheet
2. Fill-in circles for footprint desired using the key below
3. Fill-in the information below, including Series and Plating
options. See Ordering Information above
4. Send sheet to Aries for prompt quote
X
W
V
U
T
S
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
TOP VIEW
COMPANY NAME ___________________________
ADDRESS ________________________________
CITY ____________________________________
REQUESTED BY ____________________________
PHONE __________________________________
DATE ___________________________________
TOTAL NUMBER OF PINS _____________________
SERIES (circle one) PRS PLS
PLATING (circle one) 2
KEY = no pin
= pin
X = plug hole
10004
Rev. AC
2 of 2
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
