–1– ASCTB8E 201603-T
ORDERING INFORMATION
1 Form A 8A/16A,
Small Polarized Power
Relays (latching type)
DW RELAYS (ADW1)
Protective construction: Flux-resistant
type
Reflow
compatible type
(Standard type)
IEC60335-1
compliant type
(Standard & Inrush type)
Low profile type
(Inrush type)
RoHS compliant
FEATURES
1. Low profile type available
(h = 15.8 mm .622 inch)
2. Inrush type available
(TV-8 UL/C-UL approved)
3. IEC60335-1* compliant type
available
(PTI 325V VDE approved)
4. Reflow possible (pin-in-paste)
5. Certified by UL/C-UL, VDE
* Common safety standard for major electrical
appliance
TYPICAL APPLICATIONS
1. Lighting control equipment
2. Smart meters
3. Industrial equipment
4. Security equipment
5. Home appliances
6. Various power supplies
New
ADW 1 W
Operating function
1: 1 coil latching type
2: 2 coil latching type
Nominal coil voltage (DC)
03: 3V, 05: 5V, 06: 6V, 09: 9V, 12: 12V, 24: 24V
Type classification
Nil:
L:
T:
Reflow compatible type
Low profile type
IEC60335-1 compliant type
Contact capacity
Nil:
H:
Standard type (8A)
Inrush type (16A, Inrush current 100A)
Contact arrangement
1: 1 Form A
Notes: 1.
2.
3.
“L” and “T” type are non-compliant reflow soldering.
Low profile type is available (inrush type only).
The suffix “W” on the part number is only displayed on the inner and outer packaging.
It is not displayed on the relay.
DW (ADW1)
–2– ASCTB8E 201603-T
TYPES
1. Standard type (8A) (Reflow compatible type)
Standard packing: Carton: 100 pcs.; Case: 500 pcs.
Note: Carton packing is standard. Tube packing type is also available. Please consult us for details.
2. Standard type (8A) (IEC60335-1 compliant type)
Standard packing: Carton: 100 pcs.; Case: 500 pcs.
Note: Carton packing is standard. Tube packing type is also available. Please consult us for details.
3. Inrush type (16A, Inrush current 100A · IEC60335-1 compliant type)*1, *2
Standard packing: 100 pcs.; Case: 500 pcs.
Notes: *1. Carton packing is standard. Tube packing type is also available. Please contact us for details.
*2. Please contact us for the reflow compatible type of inrush type (16A, Inrush current 100A · IEC60335-1 compliant type).
4. Inrush type (16A, Inrush current 100A · Low profile type)
Standard packing: 100 pcs.; Case: 500 pcs.
Contact arrangement Nominal coil voltage Part No.
1 coil latching type 2 coil latching type
1 Form A
3V DC ADW1103W ADW1203W
5V DC ADW1105W ADW1205W
6V DC ADW1106W ADW1206W
9V DC ADW1109W ADW1209W
12V DC ADW1112W ADW1212W
24V DC ADW1124W ADW1224W
Contact arrangement Nominal coil voltage Part No.
1 coil latching type 2 coil latching type
1 Form A
3V DC ADW1103TW ADW1203TW
5V DC ADW1105TW ADW1205TW
6V DC ADW1106TW ADW1206TW
9V DC ADW1109TW ADW1209TW
12V DC ADW1112TW ADW1212TW
24V DC ADW1124TW ADW1224TW
Contact arrangement Nominal coil voltage Part No.
1 coil latching type 2 coil latching type
1 Form A
3V DC ADW1103HTW ADW1203HTW
5V DC ADW1105HTW ADW1205HTW
6V DC ADW1106HTW ADW1206HTW
9V DC ADW1109HTW ADW1209HTW
12V DC ADW1112HTW ADW1212HTW
24V DC ADW1124HTW ADW1224HTW
Contact arrangement Nominal coil voltage Part No.
1 coil latching type 2 coil latching type
1 Form A
3V DC ADW1103HLW ADW1203HLW
5V DC ADW1105HLW ADW1205HLW
6V DC ADW1106HLW ADW1206HLW
9V DC ADW1109HLW ADW1209HLW
12V DC ADW1112HLW ADW1212HLW
24V DC ADW1124HLW ADW1224HLW
DW (ADW1)
–3– ASCTB8E 201603-T
RATING
1. Coil data
1) 1 coil latching type
2) 2 coil latching type
*Square, pulse drive
2. Specifications
Notes: *1. Minimum switching load is a guide to the lower current limit of switching under the micro-load. This parameter is changed by the condition, such as switching times,
environment condition, and expected reliability. Therefore, Panasonic Corporation cannot assure the reliability. When the relay is used lower than minimum
switching load, reliability is attrition. Please use the relay over minimum switching load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*4. Allowable range when in original packaging is –40°C to +70°C –40°F to +158°F.
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
*80%V or less of
nominal voltage
(Initial)
*80%V or less of
nominal voltage
(Initial)
66.7mA 45Ω
200mW 110%V of nominal
voltage
5V DC 40.0mA 125Ω
6V DC 33.3mA 180Ω
9V DC 22.2mA 405Ω
12V DC 16.7mA 720Ω
24V DC 8.3mA 2,880Ω
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power Max. applied voltage
(at 20°C 68°F)
Set coil Reset coil Set coil Reset coil Set coil Reset coil
3V DC
*80%V or less of
nominal voltage
(Initial)
*80%V or less of
nominal voltage
(Initial)
133.3mA 133.3mA 22.5Ω 22.5Ω
400mW 400mW 110%V of nominal
voltage
5V DC 80.0mA 80.0mA 62.5Ω 62.5Ω
6V DC 66.7mA 66.7mA 90 Ω 90 Ω
9V DC 44.4mA 44.4mA 202.5Ω 202.5Ω
12V DC 33.3mA 33.3mA 360 Ω 360 Ω
24V DC 16.7mA 16.7mA 1,440 Ω1,440 Ω
Characteristics Item Specifications
Standard type Inrush type
Contact
Arrangement 1 Form A
Contact resistance (Initial) Max. 100 mΩ (By voltage drop 6 V DC 1A)
Contact material AgSnO2 type
Rating
Nominal switching capacity (resistive load) 8A 250V AC 16A 277V AC
Max. switching power (resistive load) 2,000VA 4,432VA
Max. switching voltage 250V AC 277V AC
Max. switching current 8A AC 16A AC
Nominal operating power 200mW (1 coil latching type), 400mW (2 coil latching type)
Min. switching capacity (Reference value)*1100mA 5 V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC, Measurement at same location as “Breakdown voltage” section)
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA)
Between contact and coil 5,000 Vrms for 1min. (Detection current: 10mA)
Surge breakdown voltage*2
(Between contact and coil) 12,000 V (Initial)
Set time (at 20°C 68°F) (Initial) Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Reset time (at 20°C 68°F) (Initial) Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Mechanical
characteristics
Shock resistance Functional 100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs)
Destructive 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms)
Vibration resistance Functional 10 to 55 Hz at double amplitude of 2 mm (Detection time: 10μs)
Destructive 10 to 55 Hz at double amplitude of 3 mm
Expected life
Mechanical Min. 106 (at 180 times/min.)
Electrical
Resistive load
Min. 5 × 104 (at 8A 250V AC, at 20 times/min.)
Min. 105 (at 5A 250V AC, at 20 times/min.)
(IEC60335-1 type only)
Min. 2 × 104 (at 16A 277V AC, ON:OFF = 1s:5s)
Min. 5 × 104 (at 8A 250V AC, at 20 times/min.)
Inrush current —
Min. 2.5 × 104 [Inrush 100A 600W (120V AC)
Tungsten]
Cycle rate ON:OFF = 1s:59s
Conditions Conditions for operation, transport and
storage*3 *4
Temperature: –40°C to +85°C –40°F to +185°F
Humidity: 5 to 85% R.H. (Not freezing and
condensing at low temperature)
Temperature: –40°C to +85°C –40°F to +185°F
(8A or less),
–40°C to +70°C –40°F to +158°F
(Over 8A to 16A)
Humidity: 5 to 85% R.H. (Not freezing and
condensing at low temperature)
Unit weight Approx. 8 g .28 oz (Low profile type: Approx. 7.5 g .26 oz)
DW (ADW1)
–4– ASCTB8E 201603-T
REFERENCE DATA
■ Standard type and Inrush type
1. Max. switching capacity (AC resistive load)
■ Standard type
1. Set time (1 coil latching type)
Tested sample: ADW1106, 15 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
2. Reset time (1 coil latching type)
Tested sample: ADW1106, 15 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
10001
100
10
8
110 100 250
Contact voltage, V
Inrush type
Standard type
Contact current, A
Max.
Min.
130120110100908070
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Coil applied voltage, %V
Set time, ms
Max.
Min.
130120110100908070
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Coil applied voltage, %V
Reset time, ms
3. Ambient temperature characteristics
Tested sample: ADW1106, 6pcs
Ambient temperature: –40°C to +85°C
–40°F to +185°F
■ Inrush type
1. Set time (1 coil latching type)
Tested sample: ADW1112HL, 30 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
2. Reset time (1 coil latching type)
Tested sample: ADW1112HL, 30 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
Ave.
Ave.
100
-60 -40 -20 0
80604020
Reset voltage
Set voltage
-30
-20
-10
10
20
30
Change rate
to nominal
voltage, %V
Ambient
temperature, °C
130 140 150 160120110100908070
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Coil applied voltage, %V
Set time, ms
Max.
Min.
130 140 150 160120110100908070
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Coil applied voltage, %V
Max.
Min.
Reset time, ms
3. Set time (2 coil latching type)
Tested sample: ADW1212HL, 30 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
4. Reset time (2 coil latching type)
Tested sample: ADW1212HL, 30 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
5. Ambient temperature characteristics
Tested sample: ADW1105HL, 6pcs
Ambient temperature: –40°C to +85°C
–40°F to +185°F
130 140 150 160120110100908070
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Coil applied voltage, %V
Set time, ms
Max.
Min.
130 140 150 160120110100908070
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Coil applied voltage, %V
Max.
Min.
Reset time, ms
Ave.
Ave.
100
-60 -40 -20 0
80604020
Set voltage
-30
-20
-10
10
20
30
Change rate
to nominal
voltage, %V
Ambient
temperature, °C
Reset voltage
DW (ADW1)
–5– ASCTB8E 201603-T
DIMENSIONS (mm inch)
1. Standard height type
2. Low profile type
SAFETY STANDARDS
Notes: 1. CSA standards: Certified by C-UL
2. CQC standard: Application pending, Please contact us.
Item UL/C-UL (Recognized) VDE (Recognized) TV rating (UL/C-UL)
File No. Contact rating File No. Contact rating File No. Contact rating
Standard type
(8A)
E43149 8A 250V AC R 85°C 185°F 5×104
5A 30V DC R 85°C 185°F 5×104
40032254 8A 250V AC (cos
φ
=1.0) 85°C 185°F 5×104
5A 30V DC (0ms) 85°C 185°F 5×104——
Inrush type
(16A)
E43149 16A 277V AC R 60°C 140°F 5×104
8A 250V AC R 85°C 185°F 5×104
5A 30V DC R 85°C 185°F 5×104
1200W Standard ballast 277V AC 50°C 122°F
6×103
1200W Tungsten, 240V AC 50°C 122°F 6×103
600W Tungsten, 120V AC 50°C 122°F 2.5×104
5A 347V AC R 85°C 185°F (UL standards only)
5×104
40032254 16A 277V AC (cos
φ
=1.0) 70°C 158°F 5×104
8A 250V AC (cos
φ
=1.0) 85°C 185°F 5×104
5A 30V DC (0ms) 85°C 185°F 5×104
E43149 TV-8 rating 240V AC
40°C 104°F 2.5×104
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
External dimensions
10.00
.394
24.00
.945
18.80
.740
3.20
.126
0.27
.011
0.20
.008 7.50
.295
3.50
.138
0.80
.031
17.50
.689
1.50
.059
0.40 dia.
.016 dia. 0.80
.031
0.70
.028
2 coil latching type only
General tolerance: ±0.3 ±.012
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
Schematic (Bottom view)
3.50
.138
17.50
.689
7.50
.295
4 or 5-1.20 dia. hole
4 or 5-.047 dia. hole
2 coil latching type only
(Reset condition)(Reset condition)
2 coil latching type1 coil latching type
5
3
−6
+7
−1
5
3
+6
−1
CAD Data
External dimensions
10.00
.394
24.00
.945
15.80
.622
+0.20
−0.30
+.008
−.012
3.20
.126
0.27
.011
0.20
.008
7.50
.295
3.50
.138
0.80
.031
17.50
.689
1.50
.059
0.40 dia.
.016 dia. 0.80
.031
0.25
.010 2 coil latching type only
General tolerance: ±0.3 ±.012
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
Schematic (Bottom view)
3.50
.138
17.50
.689
7.50
.295
4 or 5-1.20 dia. hole
4 or 5-.047 dia. hole
2 coil latching type only
(Reset condition)(Reset condition)
2 coil latching type1 coil latching type
5
3
−6
+7
−1
5
3
+6
−1
CAD Data
DW (ADW1)
–6– ASCTB8E 201603-T
NOTES
1. For cautions for use, please read
“GENERAL APPLICATION
GUIDELINES”.
2. Solder and cleaning conditions
1) Flow solder mounting conditions
Please obey the following conditions
when soldering automatically.
(1) Preheating: within 120°C 248°F
(solder surface terminal portion)
and within 120 seconds
(2) Soldering iron: 260°C±5°C
500°F±41°F (solder
temperature) and within 6
seconds (soldering time)
*Furthermore, because the type
of PC board used and other
factors may influence the
relays, test that the relays
function properly on the actual
PC board on which they are
mounted.
2) Reflow solder mounting (Pin-in-
Paste mounting) conditions
• Cautions to observe when
mounting temperature increases in
the relay are greatly dependent on
the way different parts are located
a PC board and the heating
method of the reflow device.
Therefore, please conduct testing
on the actual device beforehand
after making sure the parts
soldered on the relay terminals
and the top of the relay case are
within the temperature conditions
given above.
3) Since this is not a sealed type relay,
do not clean it as is. Also, be careful
not to allow flux to overflow above
the PC board or enter the inside of
the relay.
3. Max. applied voltage
It is not allowed to apply the
continuous maximum voltage to the
coil.
In order to obtain the specified
performance, please apply nominal
coil voltage.
4. Set/reset pulse time of latching type
relay
Regarding the set/reset pulse time of
the latching type relay, it is
recommended to apply nominal coil
voltage for minimum 30ms pulse
across the coil to secure the sure
operation considering the ambient
temperature and condition change
through service life.
T2
T3
T1
t1t2
T1 = 150 to 180°C
T2 = 230°C
T3 = 250°C
t1 = 60 to 120 seconds
t2 = within 30 seconds
302 to 356°F
446°For more
482°For less
DW (ADW1)
–7– ASCTB8E 201603-T
DW (ADW1)
–8– ASCTB8E 201603-T
