I N D U C T O R S September 2013 Inductors for High Frequency Multilayer Ceramic MLG series MLG0603S MLG1005S MLG1608 0603 [0201 inch]* 1005 [0402 inch] 1608 [0603 inch] * Dimensions Code JIS[EIA] (2/24) I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (3/24) I N D U C T O R S Inductors for High Frequency Circuits Product compatible with RoHS directive Halogen-free Compatible with lead-free solders AEC-Q200 Multilayer Ceramic Overview of the MLG Series FEATURES Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for Highfrequency. APPLICATION Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners, automotive equipment and other high frequency circuits for the mobile communication industry PART NUMBER CONSTRUCTION MLG Series name 0603 S LxWxH Dimensions (mm) 0603 0.6x0.3x0.3 1005 1.0x0.5x0.5 1608 1.6x0.8x0.8 Product internal code B S 0N3 Inductance (nH) 1N1 1.1 11N 11 R10 100 1R0 1000 S Inductance tolerance B 0.1nH C 0.2nH S 0.3nH D 0.5nH H 3% J 5% T Packaging style Internal code T Taping OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Package quantity Operating Storage Type temperature temperature (pieces/reel) C C MLG0603S -55 to +125 -55 to +125 15000 MLG1005S -55 to +125 -55 to +125 10000 MLG1608 -55 to +125 -55 to +125 4000 The Storage temperature range is for after the circuit board is mounted. Individual weight mg 0.2 1 4 RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (4/24) I N D U C T O R S Overview of the MLG Series RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150C 180C Time t1 60 to 120s Soldering Temp. Time T3 t2 230C 30 to 60s Peak Temp. T4 250 to 260C Time t3 10s max. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (5/24) I N D U C T O R S MLGseries MLG0603S Type 0.300.03 SHAPE & DIMENSIONS 0.150.05 0.150.05 0.300.03 0.60.03 Dimensions in mm 0.3 RECOMMENDED LAND PATTERN 0.25 0.3 0.25 Dimensions in mm * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (6/24) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 Q min. Tolerance 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 3%, 0.3nH 3%, 0.3nH 3%, 0.3nH 3%, 0.3nH 3%, 0.3nH 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% -- -- -- -- -- -- -- 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 L, Q measuring frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self-resonant frequency (GHz) min. typ. 10.0 20 up 10.0 20 up 10.0 20 up 10.0 20 up 10.0 16.3 10.0 16.1 10.0 13.8 10.0 14.4 10.0 13.6 10.0 12.3 9.0 11.4 9.0 10.4 9.0 11.5 8.5 10.0 8.2 9.8 8.0 8.9 8.0 9.2 6.5 8.1 6.2 7.8 5.8 7.0 5.5 6.9 5.0 6.6 5.0 6.4 4.5 5.4 4.5 5.5 4.2 5.3 4.2 5.1 3.6 4.4 4.2 5.3 3.8 4.5 3.4 4.9 3.2 4.1 3.0 3.7 2.8 3.6 2.7 3.4 2.5 3.3 2.3 3.0 2.2 2.8 2.1 2.6 2.0 2.5 1.9 2.3 1.8 2.2 1.6 2.0 1.6 2.0 DC resistance (: ) max. 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.15 0.15 0.15 0.15 0.2 0.2 0.25 0.25 0.25 0.25 0.3 0.35 0.35 0.4 0.4 0.45 0.45 0.5 0.55 0.6 0.7 0.7 0.8 0.8 0.8 0.9 0.9 1.1 1.1 1.2 1.2 1.2 1.3 1.5 1.6 1.8 typ. 0.02 0.02 0.02 0.02 0.02 0.03 0.03 0.04 0.04 0.06 0.07 0.07 0.09 0.12 0.14 0.14 0.15 0.15 0.20 0.23 0.22 0.27 0.27 0.28 0.23 0.31 0.32 0.32 0.43 0.45 0.51 0.53 0.53 0.63 0.60 0.69 0.70 0.78 0.75 0.88 0.90 1.00 0.95 1.20 Rated current (mA) max. Part No. 600 600 600 600 600 600 600 600 550 550 550 550 500 500 400 400 300 300 300 300 300 300 300 300 250 250 250 250 200 200 200 200 200 180 180 180 180 150 150 150 150 100 100 100 MLG0603S0N3T MLG0603S0N4T MLG0603S0N5T MLG0603S0N6T MLG0603S0N7T MLG0603S0N8T MLG0603S0N9T MLG0603S1N0T MLG0603S1N1T MLG0603S1N2T MLG0603S1N3T MLG0603S1N5T MLG0603S1N6T MLG0603S1N8T MLG0603S2N0T MLG0603S2N2T MLG0603S2N4T MLG0603S2N7T MLG0603S3N0T MLG0603S3N3T MLG0603S3N6T MLG0603S3N9T MLG0603S4N3T MLG0603S4N7T MLG0603S5N1T MLG0603S5N6T MLG0603S6N2T MLG0603S6N8T MLG0603S7N5T MLG0603S8N2T MLG0603S9N1T MLG0603S10NT MLG0603S11NT MLG0603S12NT MLG0603S13NT MLG0603S15NT MLG0603S16NT MLG0603S18NT MLG0603S20NT MLG0603S22NT MLG0603S24NT MLG0603S27NT MLG0603S30NT MLG0603S33NT The " " of the Part Number contains the inductance tolerance code, B(0.1nH), C(0.2nH), S(0.3nH), H(3%) or J(5%). Please contact us for information on inductance tolerance, G (2%). The " " of the Part Number contains the internal code. Measurement equipment Measurement item Product No. L, Q 4291B+16197A Self-resonant frequency 8720C DC resistance Type-7561 Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (7/24) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 Q min. Tolerance 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 6 6 6 6 5 5 5 5 5 5 5 5 5 5 5 5 5 5 L, Q measuring frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self-resonant frequency (GHz) min. typ. 1.5 1.8 1.4 1.6 1.3 1.6 1.3 1.5 1.2 1.5 1.2 1.4 1.1 1.3 1.05 1.24 0.95 1.17 0.90 1.08 0.77 0.94 0.77 0.94 0.77 0.94 0.70 0.88 0.67 0.84 0.64 0.77 0.60 0.73 0.56 0.68 DC resistance (: ) max. 2.0 2.0 2.2 2.2 2.8 3.2 3.3 3.5 3.8 4.0 4.3 4.5 6.5 7.0 7.3 8.0 8.3 8.5 typ. 1.68 1.40 1.91 1.48 1.98 2.11 2.22 2.40 2.67 2.80 2.97 3.13 5.24 5.53 5.68 6.24 6.67 6.99 Rated current (mA) max. 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Part No. MLG0603S36NT MLG0603S39NT MLG0603S43NT MLG0603S47NT MLG0603S51NT MLG0603S56NT MLG0603S62NT MLG0603S68NT MLG0603S75NT MLG0603S82NT MLG0603S91NT MLG0603SR10T MLG0603SR11T MLG0603SR12T MLG0603SR13T MLG0603SR15T MLG0603SR16T MLG0603SR18T The " " of the Part Number contains the inductance tolerance code, B(0.1nH), C(0.2nH), S(0.3nH), H(3%) or J(5%). Please contact us for information on inductance tolerance, G (2%). The " " of the Part Number contains the internal code. Measurement equipment Measurement item Product No. L, Q 4291B+16197A Self-resonant frequency 8720C DC resistance Type-7561 Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (8/24) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 800MHz 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.4 1.4 1.5 1.5 1.7 1.7 1.9 1.9 2.1 2.0 2.2 2.2 2.5 2.5 2.8 2.8 3.1 3.1 3.4 3.4 3.7 3.7 4.1 4.1 4.4 4.4 4.8 4.8 5.3 5.3 5.9 5.9 6.4 6.5 7.1 7.1 7.8 7.8 8.6 8.6 10 10 10 11 11 12 12 13 14 15 15 16 17 18 19 20 21 23 23 24 27 29 29 32 33 36 1.8GHz 0.3 0.4 0.5 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.2 2.6 2.9 3.2 3.5 3.8 4.3 4.8 5.1 5.7 6.5 7.4 7.8 8.8 9.8 12 13 14 16 20 22 28 32 40 45 2.0GHz 0.3 0.4 0.5 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.3 2.6 2.9 3.3 3.6 3.9 4.4 4.9 5.3 5.9 6.8 7.8 8.0 9.3 10.3 12 14 15 17 23 25 35 2.4GHz 0.3 0.4 0.5 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.3 2.7 3.0 3.4 3.7 4.1 4.6 5.2 5.6 6.4 7.5 8.7 8.7 10.4 11.5 15 16 19 22 33 37 Q typ. 500MHz 14min. 14min. 14 16 16 15 15 14 14 14 14 15 14 15 14 14 14 15 15 15 14 15 14 15 14 16 15 15 14 15 14 15 15 16 14 15 14 14 13 15 13 15 13 14 800MHz 18min. 18min. 18 20 21 20 19 18 19 18 18 19 18 19 18 18 18 19 19 19 18 19 18 20 18 20 18 19 18 18 17 18 18 19 16 19 16 17 16 17 15 17 15 16 1.8GHz 29min. 29min. 29 33 33 32 30 29 29 29 29 29 29 29 28 27 27 28 29 28 26 29 27 28 25 27 25 26 25 24 22 23 22 24 19 20 16 15 14 13 13 2.0GHz 32min. 32min. 32 34 35 34 32 30 31 30 30 30 30 30 29 28 29 29 31 29 27 29 27 29 26 28 25 26 26 24 22 22 22 23 18 18 15 13 2.4GHz 35min. 35min. 35 39 39 38 35 34 34 34 33 34 33 33 32 31 32 31 33 31 29 32 29 30 27 29 26 25 26 24 22 21 20 20 15 14 11 Part No.* MLG0603S0N3T MLG0603S0N4T MLG0603S0N5T MLG0603S0N6T MLG0603S0N7T MLG0603S0N8T MLG0603S0N9T MLG0603S1N0T MLG0603S1N1T MLG0603S1N2T MLG0603S1N3T MLG0603S1N5T MLG0603S1N6T MLG0603S1N8T MLG0603S2N0T MLG0603S2N2T MLG0603S2N4T MLG0603S2N7T MLG0603S3N0T MLG0603S3N3T MLG0603S3N6T MLG0603S3N9T MLG0603S4N3T MLG0603S4N7T MLG0603S5N1T MLG0603S5N6T MLG0603S6N2T MLG0603S6N8T MLG0603S7N5T MLG0603S8N2T MLG0603S9N1T MLG0603S10NT MLG0603S11NT MLG0603S12NT MLG0603S13NT MLG0603S15NT MLG0603S16NT MLG0603S18NT MLG0603S20NT MLG0603S22NT MLG0603S24NT MLG0603S27NT MLG0603S30NT MLG0603S33NT The " " of the Part Number contains the inductance tolerance code, B(0.1nH), C(0.2nH), S(0.3nH), H(3%) or J(5%). Please contact us for information on inductance tolerance, G (2%). The " " of the Part Number contains the internal code. Measurement equipment Product No. Manufacturer 4291B+16197A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (9/24) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 36 40 44 49 52 59 66 74 82 96 109 129 134 156 172 223 238 318 800MHz 40 47 53 60 64 77 88 104 119 161 1.8GHz 2.0GHz 2.4GHz Q typ. 500MHz 14 13 14 13 11 12 11 13 10 12 9 11 10 9 8 7 7 6 800MHz 15 14 14 13 11 11 10 11 8 8 1.8GHz 2.0GHz 2.4GHz Part No.* MLG0603S36NT MLG0603S39NT MLG0603S43NT MLG0603S47NT MLG0603S51NT MLG0603S56NT MLG0603S62NT MLG0603S68NT MLG0603S75NT MLG0603S82NT MLG0603S91NT MLG0603SR10T MLG0603SR11T MLG0603SR12T MLG0603SR13T MLG0603SR15T MLG0603SR16T MLG0603SR18T The " " of the Part Number contains the inductance tolerance code, B(0.1nH), C(0.2nH), S(0.3nH), H(3%) or J(5%). Please contact us for information on inductance tolerance, G (2%). The " " of the Part Number contains the internal code. Measurement equipment Product No. Manufacturer 4291B+16197A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (10/24) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 1000 R18 R15 R12 47N 39N 82N R10 68N 56N 33N 27N 22N 18N 15N 100 12N Inductance(nH) 10N 8N2 6N8 10 5N6 4N7 3N9 3N3 2N7 2N2 1N8 1N5 1N2 1 0 10 1N0 100 1000 10000 Frequency(MHz) Measurement equipment Product No. Manufacturer E4991A +16197A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (11/24) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 50 40 1N0 1N2 1N5 1N8 2N7 2N2 3N9 3N3 30 4N7 Q 5N6 6N8 20 18N 8N2 22N 27N 33N 39N 10N 12N 47N 68N 10 56N R10 82N R12 15N R15 R18 0 10 100 1000 10000 Frequency(MHz) Measurement equipment Product No. Manufacturer E4991A +16197A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (12/24) I N D U C T O R S MLGseries MLG1005S Type 0.500.05 SHAPE & DIMENSIONS 0.250.10 0.250.10 0.500.05 1.000.05 Dimensions in mm 0.5 RECOMMENDED LAND PATTERN 0.5 0.4 0.5 Dimensions in mm * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (13/24) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 Q min. Tolerance 0.1nH, 0.2nH 0.1nH, 0.2nH 0.1nH, 0.2nH 0.1nH, 0.2nH 0.1nH, 0.2nH 0.1nH, 0.2nH 0.1nH, 0.2nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.1nH, 0.2, 0.3nH 0.2nH, 0.3nH 0.2nH, 0.3nH 0.2nH, 0.3nH 0.2nH, 0.3nH 3%, 0.3nH 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% -- -- -- -- -- -- -- 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 L, Q measuring frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self-resonant frequency (GHz) min. typ. 10.0 20up 10.0 20up 10.0 20up 10.0 20up 10.0 18.7 10.0 16.4 10.0 17.7 10.0 13.8 10.0 19.3 10.0 11.6 8.00 11.7 8.00 9.6 7.50 9.4 8.00 10.3 7.50 9.3 7.00 8.6 7.00 8.2 6.00 7.3 5.50 6.8 5.00 6.1 5.00 6.7 5.00 6.5 4.50 6.0 4.50 5.4 4.00 5.0 4.00 5.3 4.00 4.7 3.50 4.4 3.00 4.1 3.00 4.0 3.00 3.8 2.50 3.4 2.50 3.5 2.50 3.0 2.40 2.9 2.20 2.8 2.10 2.7 2.00 2.5 1.90 2.4 1.70 2.2 1.70 2.1 1.60 2.0 1.50 1.9 DC resistance (: ) max. 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.35 0.40 0.40 0.50 0.55 0.55 0.60 0.60 0.70 0.70 0.80 0.80 typ. 0.01 0.01 0.01 0.01 0.02 0.02 0.04 0.04 0.03 0.04 0.04 0.06 0.05 0.06 0.07 0.08 0.08 0.08 0.09 0.09 0.09 0.11 0.11 0.12 0.13 0.14 0.16 0.15 0.15 0.19 0.20 0.22 0.28 0.25 0.26 0.35 0.32 0.40 0.38 0.46 0.43 0.53 0.50 Rated current (mA) max. Part No.* 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 900 900 900 800 800 800 800 700 700 700 700 600 600 600 600 500 500 500 500 400 400 400 400 400 350 350 350 350 300 300 MLG1005S0N3T MLG1005S0N4T MLG1005S0N5T MLG1005S0N6T MLG1005S0N7T MLG1005S0N8T MLG1005S0N9T MLG1005S1N0T MLG1005S1N1T MLG1005S1N2T MLG1005S1N3T MLG1005S1N5T MLG1005S1N6T MLG1005S1N8T MLG1005S2N0T MLG1005S2N2T MLG1005S2N4T MLG1005S2N7T MLG1005S3N0T MLG1005S3N3T MLG1005S3N6T MLG1005S3N9T MLG1005S4N3T MLG1005S4N7T MLG1005S5N1T MLG1005S5N6T MLG1005S6N2T MLG1005S6N8T MLG1005S7N5T MLG1005S8N2T MLG1005S9N1T MLG1005S10NT MLG1005S11NT MLG1005S12NT MLG1005S13NT MLG1005S15NT MLG1005S16NT MLG1005S18NT MLG1005S20NT MLG1005S22NT MLG1005S24NT MLG1005S27NT MLG1005S30NT The " " of the Part Number contains the inductance tolerance code, B(0.1nH), C(0.2nH), S(0.3nH), H(3%) or J(5%). Please contact us for information on inductance tolerance, G (2%). * The " " of the Part Number contains the internal code. Measurement equipment Measurement item Product No. L, Q 4291B +16193A Self-resonant frequency 8720C DC resistance Type-7561 Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (14/24) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 Q min. Tolerance 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 3%, 5% 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 6 6 6 6 L, Q measuring frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 Self-resonant frequency (GHz) min. typ. 1.40 1.8 1.30 1.7 1.20 1.6 1.20 1.6 1.10 1.4 1.10 1.5 1.00 1.3 1.00 1.3 0.80 1.1 0.75 1.1 0.70 1.0 0.70 0.9 0.70 0.9 0.70 0.9 0.60 0.8 0.60 0.8 0.55 0.7 0.50 0.6 0.50 0.6 0.42 0.5 0.45 0.5 0.40 0.5 0.40 0.5 0.35 0.4 0.35 0.4 0.30 0.4 0.30 0.4 DC resistance (: ) max. 0.90 1.00 1.00 1.10 1.20 1.20 1.30 1.40 1.50 1.50 1.60 1.80 2.00 2.20 2.20 2.50 3.50 3.80 3.80 4.20 4.20 4.80 4.80 6.50 7.00 7.50 8.00 typ. 0.59 0.62 0.65 0.67 0.75 0.72 0.83 0.85 0.87 0.93 1.01 1.14 1.37 1.48 1.48 1.68 2.44 2.74 2.88 3.15 3.02 3.42 3.54 4.82 5.21 5.39 5.97 Rated current (mA) max. 300 250 250 250 250 250 200 200 200 200 200 200 200 150 150 150 150 150 150 100 100 100 100 50 50 50 50 Part No.* MLG1005S33NT MLG1005S36NT MLG1005S39NT MLG1005S43NT MLG1005S47NT MLG1005S51NT MLG1005S56NT MLG1005S62NT MLG1005S68NT MLG1005S75NT MLG1005S82NT MLG1005S91NT MLG1005SR10T MLG1005SR11T MLG1005SR12T MLG1005SR13T MLG1005SR15T MLG1005SR16T MLG1005SR18T MLG1005SR20T MLG1005SR22T MLG1005SR24T MLG1005SR27T MLG1005SR30T MLG1005SR33T MLG1005SR36T MLG1005SR39T The " " of the Part Number contains the inductance tolerance code, B(0.1nH), C(0.2nH), S(0.3nH), H(3%) or J(5%). Please contact us for information on inductance tolerance, G (2%). * The " " of the Part Number contains the internal code. Measurement equipment Measurement item Product No. L, Q 4291B +16193A Self-resonant frequency 8720C DC resistance Type-7561 Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (15/24) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 800MHz 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.4 1.4 1.5 1.5 1.7 1.7 1.9 1.9 2.1 2.1 2.3 2.3 2.6 2.6 2.9 2.9 3.2 3.2 3.4 3.4 3.7 3.7 4.1 4.1 4.5 4.5 4.9 4.9 5.4 5.4 6.0 6.0 6.5 6.6 7.2 7.4 7.9 8.0 8.8 9.0 9.7 9.9 10.6 10.9 11.7 12.1 12.6 13.0 14.7 15.3 15.6 16.2 17.7 18.6 19.7 20.8 21.8 23.3 23.8 25.5 27.0 29.6 30.1 33.5 1.8GHz 0.3 0.4 0.5 0.6 0.7 0.8 0.8 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.3 2.6 3.0 3.3 3.6 3.9 4.3 4.8 5.4 5.8 6.8 7.4 8.6 9.3 10.8 12.4 13.8 16.2 18.3 22.0 24.1 29.0 36.8 2.0GHz 0.3 0.4 0.5 0.6 0.7 0.8 0.8 0.9 1.0 1.1 1.2 1.5 1.6 1.7 1.9 2.1 2.3 2.7 3.0 3.4 3.6 3.9 4.4 4.9 5.6 5.9 7.1 7.8 9.2 9.9 11.6 13.5 15.1 18.3 21.3 26.0 29.0 2.4GHz 0.3 0.4 0.5 0.6 0.7 0.8 0.8 0.9 1.0 1.1 1.2 1.5 1.6 1.7 1.9 2.2 2.4 2.7 3.1 3.5 3.8 4.1 4.6 5.2 6.1 6.3 7.8 8.6 10.5 11.3 13.7 16.7 19.0 Q typ. 500MHz 22min. 22min. 22min. 22 22 26 21 22 23 23 22 23 23 20 21 22 21 22 24 24 21 22 24 23 23 22 24 23 24 23 24 24 23 23 20 23 22 23 21 22 22 20 19 800MHz 27min. 27min. 27min. 27 28 34 27 29 29 29 27 29 29 26 25 27 26 27 29 30 26 28 30 30 29 28 29 28 30 28 30 30 28 29 24 28 26 28 25 27 26 23 21 1.8GHz 46min. 46min. 46min. 46 45 57 44 48 47 48 44 47 46 41 41 44 42 43 47 46 40 43 47 45 42 42 42 40 41 38 40 37 34 33 25 29 26 26 21 2.0GHz 49min. 49min. 49min. 49 49 60 47 50 50 50 47 50 49 43 43 47 44 45 49 48 42 45 49 47 43 43 43 41 41 38 39 36 33 31 22 26 22 2.4GHz 53min. 53min. 53min. 53 54 66 53 56 57 56 53 56 54 49 48 52 49 50 54 53 46 50 53 50 44 45 43 41 39 36 36 31 28 Part No.* MLG1005S0N3 T MLG1005S0N4 T MLG1005S0N5 T MLG1005S0N6 T MLG1005S0N7 T MLG1005S0N8 T MLG1005S0N9 T MLG1005S1N0 T MLG1005S1N1 T MLG1005S1N2 T MLG1005S1N3 T MLG1005S1N5 T MLG1005S1N6 T MLG1005S1N8 T MLG1005S2N0 T MLG1005S2N2 T MLG1005S2N4 T MLG1005S2N7 T MLG1005S3N0 T MLG1005S3N3 T MLG1005S3N6 T MLG1005S3N9 T MLG1005S4N3 T MLG1005S4N7 T MLG1005S5N1 T MLG1005S5N6 T MLG1005S6N2 T MLG1005S6N8 T MLG1005S7N5 T MLG1005S8N2 T MLG1005S9N1 T MLG1005S10N T MLG1005S11N T MLG1005S12N T MLG1005S13N T MLG1005S15N T MLG1005S16N T MLG1005S18N T MLG1005S20N T MLG1005S22N T MLG1005S24N T MLG1005S27N T MLG1005S30N T The " " of the Part Number contains the inductance tolerance code, B(0.1nH), C(0.2nH), S(0.3nH), H(3%) or J(5%). Please contact us for information on inductance tolerance, G (2%). The " " of the Part Number contains the internal code. Measurement equipment Product No. Manufacturer 4291B +16193A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (16/24) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 800MHz 33.5 37.8 36.7 41.5 40.3 46.9 44.3 51.6 50.2 63.2 53.7 65.6 60.9 80.2 67.5 89.8 75.8 107.5 86.5 135.2 96.9 111.0 128.9 140.8 175.2 187.8 284.7 1.8GHz 2.0GHz 2.4GHz Q typ. 500MHz 20 21 20 20 19 19 19 18 17 17 16 15 14 15 12 13 11 800MHz 23 23 21 21 20 19 18 16 15 13 1.8GHz 2.0GHz 2.4GHz Part No.* MLG1005S33N T MLG1005S36N T MLG1005S39N T MLG1005S43N T MLG1005S47N T MLG1005S51N T MLG1005S56N T MLG1005S62N T MLG1005S68N T MLG1005S75N T MLG1005S82N T MLG1005S91N T MLG1005SR10 T MLG1005SR11 T MLG1005SR12 T MLG1005SR13 T MLG1005SR15 T MLG1005SR16 T MLG1005SR18 T MLG1005SR20 T MLG1005SR22 T MLG1005SR24 T MLG1005SR27 T MLG1005SR30 T MLG1005SR33 T MLG1005SR36 T MLG1005SR39 T The " " of the Part Number contains the inductance tolerance code, B(0.1nH), C(0.2nH), S(0.3nH), H(3%) or J(5%). Please contact us for information on inductance tolerance, G (2%). The " " of the Part Number contains the internal code. Measurement equipment Product No. Manufacturer 4291B +16193A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (17/24) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 1000 R18 R39 R22 R33 82N R10 47N 22N 68N 56N R27 39N 33N 27N R15 R12 18N 100 15N 12N Inductance(nH) 10N 8N2 6N8 10 5N6 4N7 3N9 3N3 2N7 2N2 1N8 1N5 1N2 1 0 10 1N0 100 1000 10000 Frequency(MHz) Measurement equipment Product No. Manufacturer E4991A +16193A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (18/24) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 70 1N2 1N0 1N5 60 2N2 3N3 1N8 2N7 3N9 4N7 50 5N6 40 Q 6N8 30 8N2 22N 27N 82N R10 33N R12 20 39N 10N 47N 56N R15 R18 68N 10 12N R33 R27 18N R22 R39 0 10 100 15N 1000 10000 Frequency(MHz) Measurement equipment Product No. Manufacturer E4991A +16193A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (19/24) I N D U C T O R S MLGseries MLG1608Type 0.800.15 SHAPE & DIMENSIONS 0.300.20 0.300.20 0.800.15 1.600.15 Dimensions in mm 0.8 RECOMMENDED LAND PATTERN 0.6 0.8 0.6 Dimensions in mm * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (20/24) I N D U C T O R S MLGseries MLG1608 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Q min. Tolerance 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.5nH 0.5nH 0.5nH 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 8 8 8 8 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 14 14 14 14 14 14 14 14 14 14 10 10 10 10 10 10 10 L, Q measuring frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 Self-resonant frequency (GHz) min. typ. 10.0 20up 10.0 20up 10.0 19.6 10.0 16.6 8.0 10.8 7.0 8.8 6.5 8.8 6.0 7.9 5.0 6.8 5.0 6.8 4.5 5.7 4.5 5.6 3.5 4.5 3.0 3.8 2.8 3.6 2.6 3.3 2.3 3.0 2.0 2.7 1.8 2.3 1.6 2.0 1.4 1.8 1.2 1.8 1.1 1.6 1.0 1.4 0.80 1.2 0.65 0.8 0.55 0.7 0.50 0.6 0.45 0.6 0.35 0.5 0.35 0.47 0.30 0.43 0.25 0.39 0.25 0.36 0.20 0.31 0.15 0.22 0.13 0.19 DC resistance (: ) max. 0.10 0.10 0.10 0.10 0.10 0.12 0.12 0.14 0.15 0.16 0.18 0.20 0.20 0.25 0.28 0.32 0.35 0.40 0.50 0.55 0.60 0.70 0.75 0.80 1.00 1.20 1.30 1.40 1.70 2.00 2.80 3.00 3.50 4.50 5.50 5.50 5.50 typ. 0.03 0.04 0.03 0.04 0.05 0.06 0.06 0.06 0.08 0.08 0.10 0.10 0.11 0.13 0.14 0.16 0.19 0.21 0.25 0.26 0.35 0.41 0.43 0.50 0.64 0.89 1.03 1.08 1.29 1.59 1.90 2.06 2.47 3.20 3.88 3.76 4.27 Rated current (mA) max. Part No. 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 500 500 500 400 400 400 300 300 300 300 250 250 200 200 100 100 100 70 70 70 70 MLG1608B1N0ST MLG1608B1N2ST MLG1608B1N5ST MLG1608B1N8ST MLG1608B2N2ST MLG1608B2N7ST MLG1608B3N3ST MLG1608B3N9ST MLG1608B4N7ST MLG1608B5N6DT MLG1608B6N8DT MLG1608B8N2DT MLG1608B10NJT MLG1608B12NJT MLG1608B15NJT MLG1608B18NJT MLG1608B22NJT MLG1608B27NJT MLG1608B33NJT MLG1608B39NJT MLG1608B47NJT MLG1608B56NJT MLG1608B68NJT MLG1608B82NJT MLG1608BR10JT MLG1608SR12JT MLG1608SR15JT MLG1608SR18JT MLG1608SR22JT MLG1608SR27JT MLG1608SR33JT MLG1608SR39JT MLG1608SR47JT MLG1608SR56JT MLG1608SR68JT MLG1608SR82JT MLG1608S1R0JT * The " " of the Part Number contains the internal code. Because it provides for a product of smaller inductance tolerance, please refer. Measurement equipment Measurement item Product No. L, Q 4291B +16193A Self-resonant frequency 8720C DC resistance Type-7561 Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Panasonic Yokogawa * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (21/24) I N D U C T O R S MLGseries MLG1608 Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 800MHz 1.0 1.0 1.2 1.1 1.5 1.5 1.8 1.8 2.2 2.1 2.6 2.6 3.2 3.2 3.8 3.8 4.6 4.6 5.4 5.5 6.6 6.7 8.0 8.1 9.8 10.0 11.8 12.1 14.8 15.4 17.8 18.5 21.9 22.9 27.1 28.8 33.4 36.0 40.2 45.0 49.1 56.0 59.6 71.1 74.0 92.8 91.1 120.6 118 188 1.8GHz 1.0 1.2 1.5 1.8 2.2 2.7 3.3 4.0 4.9 5.8 7.3 8.9 11.5 14.8 20.6 25.5 33.6 50.6 2.0GHz 1.0 1.2 1.5 1.8 2.2 2.7 3.3 4.0 5.0 5.9 7.5 9.3 12.1 16.0 23.4 29.3 40.2 2.4GHz 1.0 1.2 1.5 1.8 2.2 2.8 3.4 4.1 5.2 6.2 8.0 10 13.6 19.3 Q typ. 500MHz 39 28 37 38 44 40 38 40 41 37 38 39 38 39 38 36 36 37 37 36 38 37 34 33 35 23 800MHz 48 35 48 48 54 51 48 50 51 46 47 48 47 48 46 44 44 43 43 40 41 38 33 31 1.8GHz 77 57 78 77 88 79 76 79 76 69 67 67 63 59 49 47 43 34 2.0GHz 82 60 81 81 91 81 79 81 79 71 68 68 63 57 46 42 38 2.4GHz 95 68 93 95 107 94 91 93 88 79 74 71 61 51 Part No.* MLG1608B1N0ST MLG1608B1N2ST MLG1608B1N5ST MLG1608B1N8ST MLG1608B2N2ST MLG1608B2N7ST MLG1608B3N3ST MLG1608B3N9ST MLG1608B4N7ST MLG1608B5N6DT MLG1608B6N8DT MLG1608B8N2DT MLG1608B10NJT MLG1608B12NJT MLG1608B15NJT MLG1608B18NJT MLG1608B22NJT MLG1608B27NJT MLG1608B33NJT MLG1608B39NJT MLG1608B47NJT MLG1608B56NJT MLG1608B68NJT MLG1608B82NJT MLG1608BR10JT MLG1608SR12JT MLG1608SR15JT MLG1608SR18JT MLG1608SR22JT MLG1608SR27JT MLG1608SR33JT MLG1608SR39JT MLG1608SR47JT MLG1608SR56JT MLG1608SR68JT MLG1608SR82JT MLG1608S1R0JT The " " of the Part Number contains the internal code. Because it provides for a product of smaller inductance tolerance, please refer. Measurement equipment Product No. Manufacturer 4291B +16193A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (22/24) I N D U C T O R S MLGseries MLG1608Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 10000 R68 R56 1R0 R82 R47 R39 R33 R27 R22 R18 R15 R12 1000 R10 82N 56N 68N 47N 39N 22N 33N 27N 100 18N Inductance(nH) 15N 12N 10N 8N2 10 6N8 5N6 4N7 3N9 3N3 2N7 2N2 1N8 1N5 1N2 1N0 1 0 10 100 1000 10000 Frequency(MHz) Measurement equipment Product No. Manufacturer E4991A +16193A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (23/24) I N D U C T O R S MLGseries MLG1608Type ELECTRICAL CHARACTERISTICS Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 100 1N5 2N7 3N3 3N9 2N2 4N7 1N8 90 5N6 6N8 80 1N2 1N0 70 8N2 Q 60 50 10N 27N 33N 40 39N 68N 56N 12N 30 R10 82N R12 20 R15 R18 R56 R47 10 R22 15N R39 R33 1R0 0 10 R68 R82 100 18N 47N R27 22N 1000 10000 Frequency(MHz) Measurement equipment Product No. Manufacturer E4991A +16193A Agilent Technologies Equivalent measurement equipment may be used. * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm (24/24) I N D U C T O R S MLGseries Packaging Style REEL DIMENSIONS o60min. 1.0 2.00.5 8.4 +2.0 -0.0 o130.2 14.4max. o210.8 o1802.0 Dimensions in mm 3.50.05 Cavity Type MLG0603S MLG1005S MLG1608 A B 0.680.05 0.380.05 1.120.1 0.620.1 1.90.2 1.10.2 K 0.5 max. 0.8 max. 1.1 max. A 8.00.3 Sprocket hole 1.5 +0.1 -0.0 1.750.1 TAPE DIMENSIONS K B 4.00.1 2.00.05 160min. Taping 2.00.05 200min. 300min. Drawing direction Dimensions in mm * All specifications are subject to change without notice. 001-01 / 20130929 / inductor_high-frequency_mlg_en.fm Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TDK: MLG1005S1N0CT000 MLG1005S1N3STD25 MLG1005S0N6BT000 MLG1005S1N5BT000 MLG1005S0N4CTD25 MLG1005S1N1STD25 MLG1005S1N5BTD25 MLG1005S0N3BTD25 MLG1005S1N2BT000 MLG1005S1N3CT000 MLG1005S0N6CTD25 MLG1005S0N8CTD25 MLG1005S0N7BTD25 MLG1005S1N2CTD25 MLG1005S1N6STD25 MLG1005S1N1BTD25 MLG1005S1N2STD25 MLG1005S1N0STD25 MLG1005S1N2BTD25 MLG1005S1N5CTD25 MLG1005S0N6BTD25 MLG1005S1N0BT000 MLG1005S0N3CTD25 MLG1005S0N8BTD25 MLG1005S0N9BTD25 MLG1005S0N5CTD25 MLG1005S0N5BT000 MLG1005S0N7BT000 MLG1005S0N5BTD25 MLG1005S1N6BT000 MLG1005S1N1BT000 MLG1005S1N3BTD25 MLG1005S1N5STD25 MLG1005S0N4BT000 MLG1005S1N3CTD25 MLG1005S1N0CTD25 MLG1005S1N2CT000 MLG1005S1N1CT000 MLG1005S0N9BT000 MLG1005S1N3BT000 MLG1005S1N6CTD25 MLG1005S1N1CTD25 MLG1005S1N0BTD25 MLG1005S0N7CTD25 MLG1005S0N4BTD25 MLG1005S0N8BT000 MLG1005S1N6BTD25 MLG1005S1N5CT000 MLG1005S0N9CTD25 MLG1005S1N6CT000 MLG1005S0N3BT000 MLG1005SR22HT000 MLG1005SR39JTD25 MLG0603S0N6CTD25 MLG1005S2N0BT000 MLG0603S0N8BTD25 MLG0603S1N8CT000 MLG1005S3N3BT000 MLG1005S18NHT000 MLG1608B39NJTD25 MLG1005S75NJTD25 MLG0603S47NHTD25 MLG1005S18NJTD25 MLG1005S2N0CTD25 MLG1005S3N6BT000 MLG1005SR33HT000 MLG1005S1N8CTD25 MLG1005S15NHTD25 MLG0603S11NJTD25 MLG1005S1N8CT000 MLG0603S3N3BTD25 MLG1005SR13JTD25 MLG1005S56NHTD25 MLG1005S5N1STD25 MLG0603S1N8BTD25 MLG1005S16NHTD25 MLG0603S13NJTD25 MLG1608B3N9STD25 MLG0603S30NHT000 MLG0603S3N6BT000 MLG1005S7N5HTD25 MLG0603S47NHT000 MLG0603S1N6STD25 MLG0603S13NHT000 MLG1608BR10JTD25 MLG1608B22NJTD25 MLG1005SR30HTD25 MLG0603S47NJTD25 MLG1005S62NHT000 MLG1005S82NJTD25 MLG1005SR27JTD25 MLG0603S3N6STD25 MLG1005S2N2CT000 MLG1005S3N9BT000 MLG0603S2N4BT000 MLG1005S20NHTD25 MLG0603S0N8CTD25 MLG0603S1N5BTD25 MLG0603SR15JTD25 MLG0603S68NHT000