DS60 Analog Temperature Sensor BENEFITS AND FEATURES * PIN ASSIGNMENT Minimizes Power Consumption with Low 125A Supply Current Minimizes Board Space with a SOT23 Package Maximizes System Accuracy with a Broad Range of Thermal Management Applications o -40C to +125C Measurement Range o Factory Calibrated for +6.25mV/C Sensitivity with 424mV DC Offset at 0C o 2.0C Accuracy Over 0C to +85C Range o Wide Power Supply Range (+2.7V VDD +5.5V) Functionally-Compatible with LM60 Applications Include Monitoring Battery Packs, Disk Drives, Printers, Space- or PowerConstrained Thermally Sensitive Systems * * * * DS60 Output Voltage Characteristic 1400 VO 1000 GND DS60 VDD VO SOT-23-3 (DS60R) PIN DESCRIPTION VDD VO GND - Power Supply Voltage - Sensor Output - Ground 600 ORDERING INFORMATION 200 Ordering Number DS60R/T&R DS60R-U DS60R+T&R -40 -20 0 20 40 60 80 100 120 Temperature (C) (V - 424mV) Measured = O Temperature 6.25mV/C DS60R+U Description SOT-23-3: 3,000 piece Tape & Reel SOT-23-3 Lead-Free SOT-23-3: 3000 piece Tape & Reel Lead-Free SOT-23-3 DESCRIPTION The DS60 analog temperature sensor measures its own temperature and provides these measurements to the user in the form of an output voltage (VO) that is proportional to degrees centigrade. The output voltage characteristic is factory-calibrated for a typical sensitivity of +6.25mV/C and a DC offset of +424mV at 0C. Its operating temperature range is -40C to +125C, corresponding to an output voltage range of +174mV to +1205mV. The DS60 has 2.0C accuracy over a 0C to +85C temperature range and over the full +2.7V to +5.5V power supply range. Its accuracy is within 3.0C over the operating temperature range and full supply range. Because the output voltage is positive for the entire temperature range, there is no need for a negative power supply. The DS60's tiny size, low-current operation, and wide supply range make it ideal for use in batterypowered applications. To further reduce power dissipation, the DS60 can be powered by any logic gate output that is capable of sourcing 125A, which allows the DS60 to be switched to a zero power standby state when the gate is forced to a logic 0. 1 of 2 100906 DS60 ABSOLUTE MAXIMUM RATINGS* Voltage on VDD Output Current Operating Temperature Range Storage Temperature Range ESD Susceptibility (Human Body Model) Soldering Temperature 220C for 15s (IR) GND -0.3V to +6.5V 5.0mA -40C to +125C -55C to +150C 2kV 215C for 60s (Vapor Phase) * These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. The Dallas Semiconductor DS60 is built to the highest quality standards and manufactured for long-term reliability. All Dallas Semiconductor devices are made using the same quality materials and manufacturing methods. However, the DS60 is not exposed to environmental stresses, such as burn-in, that some industrial applications require. (-40C to +125C; 2.7V VDD 5.5V) DC ELECTRICAL CHARACTERISTICS PARAMETER Supply Voltage Supply Current Measurement Error VO DC Offset Sensor Gain Nonlinearity Power Supply Regulation Sensor Drift Output Impedance SYMBOL VDD IDD TERR CONDITION MIN 2.7 TYP 80 0C TA 85C -40C TA 125C T = 0C V/T 6.0 424 6.25 2.7V VDD 3.3V 3.0V VDD 5.5V MAX 5.5 125 2 3 6.5 0.8 2.0 0.25 0.25 800 UNITS V A NOTES 1 2 C 2 mV mV/C C mV/V mV/V C 1, 2 2 2, 3 4 NOTES: 1) 2) 3) 4) All voltages are referenced to ground unless otherwise specified. Specified for VO sourcing 1.0A (max). Nonlinearity is the maximum deviation from an ideal linear slope. Typical drift following three consecutive passes through a vapor phase process. Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. _________________Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000 (c) 2015 Maxim Integrated Products, Inc. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2 of 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: DS60R+T&R