319 Ultra-slim Photoelectric Sensor Amplifier Built-in EX-10 SERIES Ver.2 FIBER SENSORS Related Information General terms and conditions............ F-17 Glossary of terms / General precautions....... P.1359~ / P.1405 Sensor selection guide................... P.283~ Korea's S-mark.............................. P.1410 LASER SENSORS PHOTOELECTRIC SENSORS Ver.2 Conforming to EMC Directive (Excluding EX-15/17) MICRO PHOTOELECTRIC SENSORS AREA SENSORS Recognition Certified (Some models only) LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS panasonic-electric-works.net/sunx PNP output type available STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS Amplifier built-in extraordinarily small and slim size Smallest body, just 3.5 mm 0.138 in thick Flexible mounting It can be mounted in a very small space as its size is just W10 x H14.5 x D3.5 mm W0.394 x H0.571 x D0.138 in (thru-beam, front sensing type). The diffuse reflective type sensor is front sensing and is so thin that it gives an impression of being just pasted on the mounting base. The thru-beam type is available as front sensing type, as well as, side sensing type, allowing flexible mounting. Thru-beam * Front sensing type MACHINE VISION SYSTEMS * Side sensing type Diffuse reflective * Front sensing type UV CURING SYSTEMS Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 EX-10 EX-20 EX-30 BASIC PERFORMANCE Electric power saving * High-speed response time: 0.5 ms The EX-10 series achieves reductions in power consumption of up to 65 %. These sensors contribute to environmental friendliness. The sensor is suitable for detecting small and highspeed traveling objects. * Effective from production in October 2010. EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 35 A maximum % reduction compared to conventional sensors Ultra-slim Photoelectric Sensor 320 EX-10 SERIES Ver.2 APPLICATIONS FIBER SENSORS Verifying position of PCBs Detecting ICs Detecting PCB rack LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS EX-19 LIGHT CURTAINS Transparent stick IC PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS EX-15 EX-14 Detecting wafer cassette AREA SENSORS Detecting thin ring Checking for absence of capacitor in tray PARTICULAR USE SENSORS SENSOR OPTIONS EX-14 SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES EX-13E Guide EX-14 ENDOSCOPE LASER MARKERS BASIC PERFORMANCE Minimum sensing object: o1 mm o0.039 in EX-11(E), EX-15(E) Long sensing range: 1 m 3.281 ft EX-11, EX-11E, EX-15 and EX-15E are incorporated with o1 mm o0.039 in slit masks so that o1 mm o0.039 in, or more, object can be detected. Hence, they are suitable for precise positioning or small parts detection. A sensing range of 1 m 3.281 ft has been realized with a slim size of just 3.5 mm 0.138 in. It can be used to detect even wide IC trays. PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS 1m 3.281 ft FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS EX-14 Background suppression Hardly affected by background Even a specular background separated by 100 mm 3.937 in, or more, is not detected. (However, the background should be directly opposite. A spherical or curved background may be detected.) EX-19 Background Black object reliably detected 100 mm 3.937 in It can reliably detect dark color objects since it is convergent reflective type. The best distance is approx. 10 mm 0.394 in from the object. Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 EX-10 ENVIRONMENTAL RESISTANCE EX-20 Incorporated an inverter countermeasure circuit * Waterproof IP67 EX-30 The EX-10 series become significantly stronger against inverter light and other extraneous light. The sensor can be hosed down because of its IP67 construction and the non-corrosive stainless steel mounting bracket. CX-440 Note: However, take care that if it is exposed to water splashes during operation, it may detect a water drop itself. MQ-W * Effective from production in October 2010. Fluorescent light tube Bending durability EX-40 EX--R Flexible cable type EX--R is available. It is most suitable for moving parts, such as robot arm, etc. EQ-30 EQ-500 RX-LS200 RX RT-610 321 Ultra-slim Photoelectric Sensor FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS EX-10 SERIES Ver.2 MOUNTING / SIZE Mountable with M3 screws Non-corrosive stainless steel type mounting bracket is also available. * MS-EX10-1 [Cold rolled carbon steel (SPCC)] MS-EX10-11 [Stainless steel (SUS304)] mounting bracket for the front sensing type * MS-EX10-2 [Cold rolled carbon steel (SPCC)] MS-EX10-12 [Stainless steel (SUS304)] mounting bracket for the side sensing type * MS-EX10-3 [Cold rolled carbon steel (SPCC)] MS-EX10-13 [Stainless steel (SUS304)] (L-shaped mounting bracket) PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS M3 screws PARTICULAR USE SENSORS M3 screws M3 screws SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS Red beam makes beam alignment easy WIRE-SAVING SYSTEMS The red LED beam projected from the emitter helps you to align the sensor heads. MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS FUNCTIONS VARIETIES Bright 2-color indicator Operation mode switch A convenient 2-color indicator has been incorporated in the miniature body. Thru-beam type sensor incorporated with an operation mode switch on the bifurcation is also available. It helps you to test the operability before start-up. HUMAN MACHINE INTERFACES 2-color indicator 2-color indicator Red: Operation Orange: Operationindicator indicator Green: Stability indicator Green: Stability indicator ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS UV CURING SYSTEMS OTHERS Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 Operation mode switch Operation indicator (Orange) MACHINE VISION SYSTEMS Less resources used * Based on environmental considerations, simplified packaging is used in order to reduce waste. In addition, the bag is made from polyethylene which produces no toxic gases even when burned. * Effective from production in October 2010. EX-15/17 SENS. EX -17 Even for the thru-beam type sensor, only three wires have to be connected. Ultra-slim Photoelectric Sensor EX-10 SERIES Ver.2 ORDER GUIDE Type Appearance FIBER SENSORS Sensing range 500 mm 19.685 in 1m 3.281 ft With operation mode switch on the bifurcation Thru-beam 500 mm 19.685 in Side sensing Front sensing Convergent reflective (Diffused beam type) 500 mm 19.685 in Front sensing Front sensing Side sensing Thru-beam Light-ON EX-11B Dark-ON EX-13A Light-ON EX-13B Dark-ON EX-19A Light-ON EX-19B Dark-ON EX-17 500 mm 19.685 in Light-ON Dark-ON EX-13EA Light-ON EX-13EB Dark-ON EX-17E LASER SENSORS Output PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS Switchable either Light-ON or Dark-ON EX-11EB EX-15E 150 mm 5.906 in Output operation EX-11A EX-11EA PARTICULAR USE SENSORS NPN open-collector transistor SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS Switchable either Light-ON or Dark-ON STATIC CONTROL DEVICES ENDOSCOPE EX-14A Light-ON EX-14B Dark-ON EX-11A-PN Light-ON EX-11B-PN Dark-ON EX-13A-PN Light-ON EX-13B-PN Dark-ON EX-19A-PN Light-ON EX-19B-PN Dark-ON EX-11EA-PN Light-ON LASER MARKERS 2 to 25 mm 0.079 to 0.984 in (Note 1) (Convergent point: 10 mm 0.394 in) 150 mm 5.906 in PNP output Model No. (Note 2) EX-15 150 mm 5.906 in 150 mm 5.906 in With operation mode switch on the bifurcation NPN output Front sensing 150 mm 5.906 in Convergent reflective (Diffused beam type) 322 500 mm 19.685 in 1m 3.281 ft 150 mm 5.906 in 500 mm 19.685 in EX-11EB-PN Dark-ON EX-13EA-PN Light-ON EX-13EB-PN Dark-ON EX-14A-PN Light-ON EX-14B-PN Dark-ON PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS PNP open-collector transistor 2 to 25 mm 0.079 to 0.984 in (Note 1) (Convergent point: 10 mm 0.394 in) NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets (six types). Notes: 1) The sensor does not detect even a specular background if it is separated by 100 mm 3.937 in or more. (However, the background should be directly opposite. A spherical or curved background may be detected.) 2) The model No. with "P" shown on the label affixed to the thru-beam type sensor is the emitter, "D" shown on the label is the receiver. (e.g.) Emitter of EX-11A: EX-11P, Receiver of EX-11A: EX-11AD UV CURING SYSTEMS Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 323 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS Ultra-slim Photoelectric Sensor EX-10 SERIES Ver.2 ORDER GUIDE Flexible cable type Flexible cable type is also available for NPN output type. (excluding sensor with operation mode switch on the bifurcation EX-15/17) When ordering this type, suffix "-R" to the model No. (e.g.) Flexible cable type of EX-11A is "EX-11A-R". 5 m 16.404 ft cable length type 5 m 16.404 ft cable length type (standard: 2 m 6.562 ft) is also available for NPN output type. (excluding flexible cable type) When ordering this type, suffix "-C5" to the model No. (e.g.) 5 m 16.404 ft cable length type of EX-11A is "EX-11A-C5". OPTIONS PARTICULAR USE SENSORS SENSOR OPTIONS Designation Model No. Sensor mounting bracket Description * MS-EX10-1 SIMPLE WIRE-SAVING UNITS MS-EX10-1 Mounting bracket for the front sensing type sensor [Cold rolled carbon steel (SPCC)] (The thru-beam type sensor needs two brackets.) WIRE-SAVING SYSTEMS MS-EX10-2 Mounting bracket for the side sensing type sensor [Cold rolled carbon steel (SPCC)] (The thru-beam type sensor needs two brackets.) MS-EX10-3 L-shaped mounting bracket sensor [Cold rolled carbon steel (SPCC)] (The thru-beam type sensor needs two brackets.) MS-EX10-11 Mounting bracket for the front sensing type sensor [Stainless steel (SUS304)] (The thru-beam type sensor needs two brackets.) MS-EX10-12 Mounting bracket for the side sensing type sensor [Stainless steel (SUS304)] (The thru-beam type sensor needs two brackets.) MS-EX10-13 L-shaped mounting bracket [Stainless steel (SUS304)] (The thru-beam type sensor needs two brackets.) MEASUREMENT SENSORS STATIC CONTROL DEVICES Sensor mounting bracket ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES Slit on one side * Sensing range: 600 mm 23.622 in [EX-19] 250 mm 9.843 in [EX-13, EX-17] * Min. sensing object: o2 mm o0.079 in Slit on both sides * Sensing range: 400 mm 15.748 in [EX-19] 200 mm 7.874 in [EX-13, EX-17] * Min. sensing object: o1.2 mm o0.047 in Slit on one side * Sensing range: 800 mm 31.496 in [EX-19] 350 mm 13.780 in [EX-13] * Min. sensing object: o2 mm o0.079 in Slit on both sides * Sensing range: 500 mm 19.685 in [EX-19] 300 mm 11.811 in [EX-13] * Min. sensing object: o1.5 mm o0.059 in Slit on one side * Sensing range: 250 mm 9.843 in [EX-13E, EX-17E] * Min. sensing object: o2 mm o0.079 in Slit on both sides * Sensing range: 200 mm 7.874 in [EX-13E, EX-17E] * Min. sensing object: o1.2 mm o0.047 in OS-EX10-12 (Slit size o1.2 mm o0.047 in) ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS Slit mask OS-EX10-15 (Slit size o1.5 mm o0.059 in) UV CURING SYSTEMS OS-EX10E-12 Selection Guide (Slit size o1.2 mm o0.047 in) Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 EX-10 EX-20 EX-30 EX-40 Sensor checker (Note) CHX-SC2 It is useful for beam alignment of thru-beam type sensors. The optimum receiver position is given by indicators, as well as an audio signal. Mounting screw MS-M2 Mounting screws with washers (50 pcs. lot). It can mount securely as it is spring washer attached. * OS-EX10-12 * OS-EX10-15 * OS-EX10E-12 Example of mounting (OS-EX10E-12) Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) Two M2 (length 8 mm 0.315 in) pan head screws are attached. * MS-EX10-3 * MS-EX10-12 Material: Stainless steel (SUS304) Two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached. * MS-EX10-13 * CHX-SC2 PO W ER C H LE VE L EQ-500 Sensor checker MQ-W RT-610 * MS-EX10-2 Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] are attached. Sensor checker Slit mask EQ-30 RX Two M2 (length 4 mm 0.157 in) pan head screws are attached. Material: Stainless steel (SUS304) Note: Refer to the sensor checker CHX-SC2 pages for details. CX-440 RX-LS200 Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) * MS-EX10-11 Tighten along with the sensor mounting bracket. X- SC 2 Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) Two M2 (length 4 mm 0.157 in) pan head screws, and two M2 (length 8 mm 0.315 in) pan head screws are attached. Material: Stainless steel (SUS304) Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] and two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached. Ultra-slim Photoelectric Sensor EX-10 SERIES Ver.2 SPECIFICATIONS FIBER SENSORS Convergent reflective Thru-beam * with operation mode switch on bifurcation (Diffused beam type) Thru-beam Type Front sensing Side sensing Front sensing Side sensing Front sensing Front sensing Front sensing Side sensing Front sensing Side sensing Item Model No. (Note 2) Light-ON Dark-ON Sensing range Min. sensing object EX-11A(-PN) EX-11EA(-PN) EX-13A(-PN) EX-13EA(-PN) EX-19A(-PN) EX-14A(-PN) EX-15 EX-11B(-PN) EX-11EB(-PN) EX-13B(-PN) EX-13EB(-PN) EX-19B(-PN) EX-14B(-PN) (Note 3) 150 mm 5.906 in Repeatability (perpendicular to sensing axis) Supply voltage Output 500 mm 19.685 in 2 to 25 mm 0.079 1 m 3.281 ft to 0.984 in (Note 4) (Conv. point: 10 mm 0.394 in) LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 0.05 mm 0.002 in or less 0.1 mm 0.004 in or less 0.05 mm 0.002 in or less SIMPLE WIRE-SAVING UNITS 13 mA or less 25 mA or less <PNP output type> <NPN output type> PNP open-collector transistor NPN open-collector transistor * Maximum sink current: 50 mA * Maximum source current: 50 mA * Applied voltage: 30 V DC or less (between output and 0 V) * Applied voltage: 30 V DC or less (between output and +V) * Residual voltage: 2 V or less (at 50 mA sink current) * Residual voltage: 2 V or less (at 50 mA source current) 1 V or less (at 16 mA sink current) 1 V or less (at 16 mA source current) NPN open-collector transistor * Maximum sink current: 100 mA * Applied voltage: 30 V DC or less (between output and 0 V) * Residual voltage: 2 V or less (at 100 mA sink current) 1 V or less (at 16 mA sink current) DC-12 or DC-13 - 0.5 ms or less Orange LED (lights up when the output is ON) Orange LED (lights up when the output is ON), located on the bifurcation - Red LED (lights up under light received condition), located on the receiver Green LED (lights up under stable light received condition or stable dark condition) Green LED (lights up under stable light received condition or stable dark condition), located on the receiver 3 (Industrial environment) - Protection IP67 (IEC) -25 to +55 C -13 to +131 F (No dew condensation or icing allowed), Storage: -30 to +70 C -22 to +158 F Ambient humidity WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS Incorporated Pollution degree AREA SENSORS SENSOR OPTIONS 12 to 24 V DC 10 % Ripple P-P 10 % or less Incident beam indicator Environmental resistance 500 mm 19.685 in MICRO PHOTOELECTRIC SENSORS - Response time Ambient temperature EX-17E (Note 3) PHOTOELECTRIC SENSORS 15 % or less of operation distance (Note 4) Short-circuit protection Stability indicator 150 mm 5.906 in EX-17 (Note 3) LASER SENSORS - Emitter: 10 mA or less, Receiver: 10 mA or less Utilization category Operation indicator EX-15E (Note 3) o1 mm o0.039 in opaque object o2 mm o0.079 in opaque object o2 mm o0.079 in o0.1 mm o0.004 o1 mm o0.039 in opaque object o2 mm o0.079 in opaque object (Completely beam interrupted object) (Completely beam interrupted object) opaque object in copper wire (Completely beam interrupted object) (Completely beam interrupted object) Completely beam Completely beam Setting distance Setting distance Setting distance Setting distance interrupted object interrupted object between emitter between emitter between emitter between emitter Setti n g di s tance between and receiver: and receiver: and receiver: and receiver: Setting distance: emitter and receiver: 500 mm 19.685 in 150 mm 5.906 in 150 mm 5.906 in 500 mm 19.685 in 10 mm 0.394 in 1 m 3.281 ft Hysteresis Current consumption 324 PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Incandescent light: 3,000 x at the light-receiving face EMC - EN 60947-5-2 Selection Guide 1,000 V AC for one min. between all supply terminals connected together and enclosure Amplifier Built-in Insulation resistance 20 M, or more, with 250 V DC megger between all supply terminals connected together and enclosure Power Supply Built-in Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each Amplifierseparated Voltage withstandability 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each Shock resistance Emitting element Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) Enclosure: Polyethylene terephthalate Lens: Polyalylate Enclosure: Polyethylene terephthalate Lens: Polyalylate, Bifurcation: Polyalylate 0.1 mm 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long 0.2 mm 3-core cabtyre cable, 2 m 6.562 ft long (beyond bifurcation; from emitter / receiver to bifurcation: 0.5 m 1.640 ft long) Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver). Extension up to total 100 m 328 ft is possible with 0.3 mm2, or more, cable. Material Cable (Note 5) Cable extension Weight Accessories 2 2 Net weight (each emitter and receiver): 20 g approx., Gross weight: 60 g approx. Net weight: 20 g approx. Net weight: 55 g approx., Gross weight: 80 g approx. Gross weight: 40 g approx. Mounting screws: 1 set Mounting screws: 1 set Mounting screws: 1 set, Adjusting screwdriver: 1 pc. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 C +73.4 F. 2) Model Nos. having the suffix "-PN" are PNP output type. 3) Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the bifurcation). 4) The sensing range and the hysteresis of convergent reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object. 5) The flexible cable type (model Nos. having suffix "-R") has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) flexible cabtyre cable, 2 m 6.562 ft long. CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 325 Ultra-slim Photoelectric Sensor I/O CIRCUIT AND WIRING DIAGRAMS FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS EX-11EX-13EX-19EX-14 (Brown) +V D2 Tr PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 - 12 to 24 V DC 10 % Brown Black (Note) Load + - 12 to 24 V DC 10 % Blue Users' circuit Note: The emitter of the thru-beam type sensor does not incorporate the output. Note: The emitter of the thru-beam type sensor does not incorporate the black wire. Symbols ... D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor EX-11-PNEX-13-PNEX-19-PNEX-14-PN I/O circuit diagram PNP output type Wiring diagram Color code (Brown) +V ZD Tr D2 D1 PLC / TERMINALS HUMAN MACHINE INTERFACES + 50 mA max. Internal circuit Sensor circuit LASER MARKERS Load (Blue) 0 V STATIC CONTROL DEVICES ENDOSCOPE (Black) Output (Note) ZD PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS Wiring diagram Color code D1 Sensor circuit LIGHT CURTAINS NPN output type I/O circuit diagram MICRO PHOTOELECTRIC SENSORS AREA SENSORS EX-10 SERIES Ver.2 50 mA max. (Black) Output (Note) Load (Blue) 0 V + - 12 to 24 V DC 10 % Brown Black (Note) Blue Internal circuit Users' circuit Note: The emitter of the thru-beam type sensor does not incorporate the output. Symbols ... D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor Load + - 12 to 24 V DC 10 % Note: The emitter of the thru-beam type sensor does not incorporate the black wire. Ultra-slim Photoelectric Sensor EX-10 SERIES Ver.2 I/O CIRCUIT AND WIRING DIAGRAMS FIBER SENSORS EX-15EX-15E EX-17 EX-17E EX-17W I/O circuit diagram NPN output type EX-15, EX-15E, EX-17, EX-17E wiring diagram Sensor circuit (Brown) +V D2 Tr (Black) Output Load + - 100 mA max. ZD 12 to 24 V DC 10 % LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS Users' circuit PARTICULAR USE SENSORS Symbols ... D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS Brown Black Load + - 12 to 24 V DC 10 % Blue All models 50 50 10 5 1 EX-11 EX-15 0 200 400 600 800 1,000 7.874 15.748 23.622 31.496 39.370 Setting distance L (mm in) Excess gain 100 Excess gain 100 LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES EX-19 10 ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS 5 1 MEASUREMENT SENSORS ENDOSCOPE Thru-beam type Correlation between setting distance and excess gain WIRE-SAVING SYSTEMS STATIC CONTROL DEVICES SENSING CHARACTERISTICS (TYPICAL) EX-13 EX-17 PHOTOELECTRIC SENSORS AREA SENSORS (Blue) 0 V Internal circuit LASER SENSORS MICRO PHOTOELECTRIC SENSORS Color code D1 326 MACHINE VISION SYSTEMS 0 1 2 3 4 5 3.281 6.562 9.843 13.123 16.404 Setting distance L (m ft) UV CURING SYSTEMS Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 327 Ultra-slim Photoelectric Sensor SENSING CHARACTERISTICS (TYPICAL) FIBER SENSORS LASER SENSORS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS 200 7.874 EX-11 EX-15 100 3.937 Emitter 50 1.969 L 0 100 3.937 SENSOR OPTIONS EX-11E EX-15E EX-11E EX-15E Emitter L 150 5.906 EX-11 EX-15 EX-11E EX-15E Emitter Emitter 100 3.937 50 1.969 Receiver Receiver PARTICULAR USE SENSORS SIMPLE WIRE-SAVING UNITS EX-11 EX-15 150 5.906 0 20 50 0 50 100 1.969 1.969 3.937 Center Left Right Operating point (mm in) L EX-11 EX-15 Receiver L EX-11E Receiver EX-15E 10 0 10 20 Center Left Right Operating angle ( ) EX-13EX-13E EX-17 EX-17E Thru-beam type Parallel deviation Angular deviation Parallel deviation with slit masks (o1.2 mm o0.047 in) Parallel deviation with slit masks (o1.5 mm o0.059 in) 800 31.496 800 31.496 400 15.748 400 15.748 ENDOSCOPE LASER MARKERS 600 23.622 400 15.748 HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS EX-13E EX-17E Emitter Emitter 200 7.874 PLC / TERMINALS 600 23.622 EX-13 EX-17 L L EX-13 EX-13E Receiver EX-17 EX-17E Receiver 0 100 50 0 50 100 3.937 1.969 1.969 3.937 Center Left Right Operating point (mm in) 0 20 300 11.811 EX-13 EX-17 EX-13E EX-17E Emitter 400 15.748 200 7.874 Setting distance L (mm in) STATIC CONTROL DEVICES Setting distance L (mm in) MEASUREMENT SENSORS Setting distance L (mm in) WIRE-SAVING SYSTEMS 200 7.874 Emitter L EX-13E Receiver EX-17E L EX-13 EX-17 Receiver 10 0 10 Center Left Right Operating angle ( ) Amplifierseparated L 100 3.937 Receiver Slit on one side, sensing range: 350 mm 13.78 in Slit on both sides, sensing range: 300 mm 11.81 in 0 100 3.937 20 0 20 40 0.787 0.787 1.575 Center Left Right Operating point (mm in) Parallel deviation Angular deviation Parallel deviation with slit masks (o1.2 mm o0.047 in) 800 31.496 1,000 39.370 1,000 39.370 500 19.685 Emitter 0 200 7.874 CX-400 L Receiver 100 0 100 200 3.937 3.937 7.874 Center Left Right Operating point (mm in) 400 15.748 Emitter 500 19.685 L 20 0 20 Center Left Right Operating angle ( ) Emitter 200 7.874 Slit on both sides Receiver 0 40 1,000 39.370 600 23.622 EX-30 EX-40 CX-440 0 200 7.874 40 L Receiver Receiver 1 100 0 100 200 3.937 3.937 7.874 Center Left Right Operating point (mm in) MQ-W RX-LS200 RX RT-610 Receiver 1 Emitter 1 x 2 or more EQ-30 EQ-500 Emitter 1 L Receiver 50 0 50 100 1.969 1.969 3.937 Center Left Right Operating point (mm in) Receiver 2 Beam from Emitter 1 may be caught by Receiver 2. Emitter 2 L Slit on one side Emitter L Receiver 0 200 7.874 *Optical properties of side sensing types (EX-11E/13E/15E/17E) Due to the optical properties of side sensing types, note that sensing may be affected if multiple sensors are positioned in such a way that optical axes intersect as shown in the diagram below. Emitter 2 Slit on both sides 500 19.685 EX-10 EX-20 Emitter Parallel deviation with slit masks (o1.5 mm o0.059 in) Slit on one side Setting distance L (mm in) Power Supply Built-in 200 7.874 Thru-beam type Setting distance L (mm in) Amplifier Built-in Emitter EX-19 Setting distance L (mm in) Selection Guide 0 40 1.575 20 Slit on one side or both sides 300 11.811 100 3.937 MACHINE VISION SYSTEMS UV CURING SYSTEMS EX-13/17 Slit on one side EX-13/17 Slit on both sides EX-13E/17E Slit on one side EX-13E/17E Slit on both sides Setting distance L (mm in) LIGHT CURTAINS Angular deviation 200 7.874 Setting distance L (mm in) AREA SENSORS Thru-beam type Parallel deviation Setting distance L (mm in) MICRO PHOTOELECTRIC SENSORS EX-11EX-11EEX-15EX-15E Setting distance L (mm in) PHOTOELECTRIC SENSORS EX-10 SERIES Ver.2 Receiver 2 There is no problem when sensors are installed in parallel (although the distance between sensors should be x 2 or more). 100 0 100 200 3.937 3.937 7.874 Center Left Right Operating point (mm in) Ultra-slim Photoelectric Sensor EX-10 SERIES Ver.2 328 SENSING CHARACTERISTICS (TYPICAL) FIBER SENSORS EX-14 Convergent reflective type PHOTOELECTRIC SENSORS Sensing fields * Horizontal (left and right) direction 40 1.575 * Vertical (up and down) direction 30 1.181 L 20 0.787 10 0.394 50 x 50 mm 1.969 x 1.969 in Non-glossy paper White 20 0.787 White 7.75 mm 0.305 in N4 0 10 0.394 5 0 5 10 0.197 0.197 0.394 Center Left Right Operating point (mm in) LIGHT CURTAINS PRESSURE / FLOW SENSORS 10 0.394 N4 0 10 0.394 AREA SENSORS Setting distance L (mm in) Setting distance L (mm in) 30 1.181 7 mm 0.276 in MICRO PHOTOELECTRIC SENSORS 40 1.575 50 x 50 mm 1.969 x 1.969 in Non-glossy paper INDUCTIVE PROXIMITY SENSORS 5 0 5 0.197 0.197 Center Down Up Operating point (mm in) L PARTICULAR USE SENSORS 10 0.394 SENSOR OPTIONS Correlation between lightness and sensing range Correlation between material (50 x 50 mm 1.969 x 1.969 in) and sensing range 40 1.575 80 3.150 N1 N2 N3 N4 N5 N6 N7 N8 N9 Lightness shown on the left may differ slightly from the actual object condition. PRECAUTIONS FOR PROPER USE * Never use this product as a sensing device for personnel protection. * In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Side sensing Sensing direction Attached screw [M2 (length 10 0.394)] Front sensing Attached screw [M2 (length 8 0.315)] M2 x 0.4 0.016 hole tapped, 7 0.276 deep M2 x 0.4 0.016 hole tapped, 6 0.157 deep * In case of using attached screws and nuts (Unit: mm in) Side sensing Front sensing Flat washers 11 0.433 Sensing direction Attached screw [M2 (length 10 0.394)] Thickness of mounting plate: 2 0.079 or less Sensing direction Nuts Spring washers Attached screw [M2 (length 8 0.315)] 11 0.433 Thickness of mounting plate: 2.5 0.098 or less The tightening torque should be 0.2 N*m or less. WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES Operation mode switch (EX-15, EX-15E, EX-17 and EX-17E only) Operation mode switch L: Light-ON D: Dark-ON Operation indicator (Orange) Lights up when the output is ON. Switch position 11 0.433 The tightening torque should be 0.2 N*m or less. SIMPLE WIRE-SAVING UNITS ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS Sensing direction 11 0.433 The bars in the graph indicate the sensing range (typical) for the respective material. However, there is a slight variation in the sensing range depending on the product. Further, if there is a reflective object (conveyor, etc.) in the background of the sensing object, since it affects the sensing, separate it by more than twice the sensing range shown in the left graph. Refer to General precautions. Mounting * In case of mounting on tapped holes (Unit: mm in) Aluminum-evaporated mirror N8 Light Distance to convergent point N4 N6 Lightness Aluminum plate (Hair line) N2 Dark 20 0.787 10 0.394 0 Stainless steel plate 0 Distance to convergent point 10 0.394 40 1.575 Black circuit board Sensing region Black rubber sheet IC tray (Black) Glass epoxy printed circuit board (Green masked surface) Ceramic circuit board White non-glossy paper Sensing range L (mm in) 20 0.787 60 2.362 Sensing range L (mm in) The sensing region (typical) is represented by oblique lines in the left figure. However, the sensitivity should be set with enough margin because of slight variation in products. 30 1.181 LASER SENSORS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Amplifier Built-in Power Supply Built-in Description Amplifierseparated Light-ON mode is set when the switch is turned fully clockwise (L side). CX-400 Dark-ON mode is set when the switch is turned fully counterclockwise (D side). EX-20 Others * Do not use during the initial transient time (50 ms) (EX-15, EX-15E, EX-17, EX-17E: 100 ms) after the power supply is switched on. * Excess bending of the cable or stress applied to the cable may disconnect the internal lead wire. EX-10 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 329 FIBER SENSORS LASER SENSORS Ultra-slim Photoelectric Sensor EX-10 SERIES Ver.2 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from our website. EX-11AEX-11BEX-13AEX-13BEX-19AEX-19B Sensor PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS 3.5 0.138 2.1 0.083 10 0.394 5.5 0.217 LIGHT CURTAINS 1.75 0.069 1.75 0.069 PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS 14.5 11 0.571 0.433 PARTICULAR USE SENSORS 4 0.157 2-o2.2 o0.087 mounting holes SIMPLE WIRE-SAVING UNITS o2.5 o0.098 cable, 2 m 6.562 ft long 6.5 0.256 6.5 0.256 PLC / TERMINALS Receiver 10 0.394 1.75 0.069 4.5 0.177 1.75 0.069 HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS 14.5 11 0.571 0.433 FA COMPONENTS Sensor Stability indicator (Green) Operation indicator (Orange) 4.5 0.177 2.25 0.089 2.25 0.089 Beamemitting part 4 0.157 Beamreceiving part 2-o2.2 o0.087 mounting holes 6.5 0.256 Emitter 3.5 0.138 EX-30 EX-40 CX-440 11 14.5 0.433 0.571 6.5 0.256 o2.5 o0.098 cable, 2 m 6.562 ft long 2.1 0.083 1.75 0.069 1.75 4 0.069 0.157 14.5 11 0.571 0.433 Receiver 5.5 0.217 Stability indicator (Green) Incident beam indicator (Orange) 10 0.394 6.45 0.254 5.5 0.217 1.75 0.069 o2.5 o0.098 cables EQ-500 2-o2.2 o0.087 500 mounting holes 19.685 2.1 0.083 Stability indicator (Green) 10 1.75 0.394 0.069 1.75 0.069 4 0.157 14.5 11 0.571 0.433 4.5 0.177 2-o2.2 o0.087 mounting holes Beamemitting part 4.2 0.165 4.5 0.177 2.25 0.089 4.5 0.177 2.25 0.089 Beamreceiving part 4.2 0.165 7 0.276 1 0.039 8 0.315 4.5 0.177 2-o2.2 o0.087 mounting holes Operation mode switch o3.8 o0.150 cable, 2 m 6.562 ft long RT-610 500 19.685 11 14.5 0.433 0.571 19.2 0.756 38 1.496 Operation mode switch RX Receiver 6.45 0.254 1.75 0.069 1.5 4 1.75 0.059 0.157 0.069 15.2 0.598 Operation indicator (Orange) 38 1.496 10 0.394 Incident beam indicator (Orange) o2.5 o0.098 cables 19.2 0.756 RX-LS200 Sensor Emitter 3.5 0.138 15.2 0.598 Operation indicator (Orange) MQ-W 1.5 1.75 0.069 0.059 4 0.157 11 14.5 0.433 0.571 4.5 0.177 Beam- Beamemitting receiving part part 4.5 0.177 2-o2.2 o0.087 mounting holes EQ-30 EX-15E EX-17E Sensor 10 0.394 2-o2.2 o0.087 mounting holes Receiver EX-15 EX-17 Amplifierseparated EX-20 4 0.157 4.2 0.165 4.2 0.165 o2.5 o0.098 cable, 2 m 6.562 ft long Power Supply Built-in EX-10 1.75 1.5 0.069 0.059 4.5 0.177 Emitter CX-400 10 0.394 6.45 0.254 1.75 0.069 4.5 0.177 MACHINE VISION SYSTEMS Amplifier Built-in 2-o2.2 o0.087 mounting holes EX-11EAEX-11EBEX-13EAEX-13EB LASER MARKERS Selection Guide 11 14.5 0.433 0.571 o2.5 o0.098 cable, 2 m 6.562 ft long ENDOSCOPE UV CURING SYSTEMS 3.5 0.138 2.1 0.083 4.5 0.177 Beamemitting part Emitter WIRE-SAVING SYSTEMS STATIC CONTROL DEVICES 4 0.157 Beamreceiving part 4.5 0.177 SENSOR OPTIONS MEASUREMENT SENSORS Stability indicator (Green) Operation indicator (Orange) 1.75 1.5 0.069 0.059 10 0.394 6.45 5.5 0.254 0.217 1.75 0.069 o3.8 o0.150 cable, 2 m 6.562 ft long 7 0.276 1 0.039 8 0.315 EX-10 SERIES Ver.2 Ultra-slim Photoelectric Sensor DIMENSIONS (Unit: mm in) 330 The CAD data in the dimensions can be downloaded from our website. EX-14AEX-14B Sensor FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS 13 0.512 6.45 0.254 5 0.197 Stability indicator (Green) 3.5 0.138 Operation indicator (Orange) 2.75 0.108 1.75 0.069 AREA SENSORS 2.1 0.083 LIGHT CURTAINS 1.75 1.5 0.069 0.059 4.5 0.177 Beamreceiving part PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS 11 14.5 0.433 0.571 Beam-emitting part PARTICULAR USE SENSORS 4.5 0.177 8 0.315 SENSOR OPTIONS 2-o2.2 o0.087 mounting holes SIMPLE WIRE-SAVING UNITS o2.5 o0.098 cable, 2 m 6.562 ft long WIRE-SAVING SYSTEMS MS-EX10-1 Sensor mounting bracket (Optional) Assembly dimensions t 1.2 t 0.047 STATIC CONTROL DEVICES Mounting drawing with EX-14 7.6 0.299 ENDOSCOPE 20 0.787 (0.7) 7.6 (0.028) 0.299 t 1.2 t 0.047 LASER MARKERS 3.7 0.146 4-M2 x 0.4 0.016 thru-hole threads 20 0.787 6.5 8 3.5 0.256 0.315 0.138 15 8 0.315 0.591 11 0.433 Beamemitting part 22.75 0.896 13 0.512 5 10.75 0.423 0.197 8 0.315 HUMAN MACHINE INTERFACES 3.5 0.138 ENERGY CONSUMPTION VISUALIZATION COMPONENTS 1.25 0.049 (8.8) (0.346) FA COMPONENTS MACHINE VISION SYSTEMS 3 0.118 11 15 8 0.315 0.433 0.591 Beamreceiving part Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) PLC / TERMINALS (4.9) (0.193) 3.7 3.5 0.146 0.138 2-o3.4 o0.134 mounting holes UV CURING SYSTEMS 4.25 0.167 Two M2 (length 4 mm 0.157 in) pan head screws are attached. 2-o3.4 o0.134 mounting holes MS-EX10-2 Sensor mounting bracket (Optional) Assembly dimensions t 1.2 t 0.047 7.6 0.299 4.5 6.25 0.246 0.177 1.4 0.055 4 0.157 8 15 0.315 0.591 11 0.433 15 11 0.591 0.433 2-M2 x 0.4 0.016 thru-hole threads 8 0.315 3.2 0.126 1.25 0.049 1.4 0.055 Beam- 2.5 0.098 receiving part 8 0.315 3.5 0.138 Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) Two M2 (length 8 mm 0.315 in) pan head screws are attached. (2.3) (0.091) (7.45) (0.293) (1.3) (0.051) 10 0.25 0.394 0.010 Amplifier Built-in Amplifierseparated 7.6 0.299 t 1.2 t 0.047 Selection Guide Power Supply Built-in Mounting drawing with EX-11E and EX-13E 6.25 0.246 20 0.787 3.2 0.126 MEASUREMENT SENSORS 4.25 0.167 8 0.315 20 0.787 3.5 0.138 CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 331 FIBER SENSORS LASER SENSORS Ultra-slim Photoelectric Sensor EX-10 SERIES Ver.2 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from our website. MS-EX10-3 Sensor mounting bracket (Optional) PHOTOELECTRIC SENSORS Assembly dimensions 15 0.591 MICRO PHOTOELECTRIC SENSORS Mounting drawing with EX-14 7 0.276 10.5 0.413 AREA SENSORS 1.4 0.055 LIGHT CURTAINS 8 0.315 t 1.2 t 0.047 PRESSURE / FLOW SENSORS 3.2 0.126 6.5 0.256 PARTICULAR USE SENSORS 11 0.433 t 1.2 t 0.047 (0.7) (0.028) 4-M2 x 0.4 0.016 thru-hole threads 10.8 0.425 INDUCTIVE PROXIMITY SENSORS 10.8 0.425 (2.75) (0.108) 3.5 0.138 Beam1.75 0.069 13 emitting part 0.512 1.25 5 6.25 0.049 0.197 0.246 Beamreceiving part Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) SIMPLE WIRE-SAVING UNITS Two M2 (length 4 mm 0.157 in) pan head screws and two M2 (length 8 mm 0.315 in) pan head screws are attached. 7 0.276 3.2 0.126 1.4 0.055 3 0.118 11 15 0.438 0.591 2 0.079 SENSOR OPTIONS 10.5 0.413 8 0.315 4.25 0.167 WIRE-SAVING SYSTEMS MEASUREMENT SENSORS MS-EX10-11 Sensor mounting bracket (Optional) Assembly dimensions STATIC CONTROL DEVICES Mounting drawing with EX-14 8.1 0.319 t 1.2 t 0.047 ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES 3.7 0.146 4-M2 x 0.4 0.016 thru-hole threads ENERGY CONSUMPTION VISUALIZATION COMPONENTS 11 0.433 3.5 3.7 0.146 0.138 8 15 0.315 0.591 3.2 0.126 MACHINE VISION SYSTEMS 1.4 0.055 22.75 0.896 13 0.512 5 0.197 10.75 0.423 8 0.315 (9.3) (0.366) Amplifier Built-in 8 11 15 0.315 0.433 0.591 MS-EX10-12 Sensor mounting bracket (Optional) 6.25 0.246 Assembly dimensions 8.1 0.319 Mounting drawing with EX-11E and EX-13E 20 0.787 EX-20 EX-30 1.4 0.055 6.25 4.5 0.246 0.177 3.2 0.126 RX 2-M2 x 0.4 0.016 thru-hole threads RT-610 Material: Stainless steel (SUS304) 4 0.157 8 15 0.315 0.591 11 0.433 8 0.315 1.4 0.055 3.2 0.126 3.5 0.138 Two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached. (2.3) (0.091) (7.45) (0.293) (1.3) (0.051) EX-40 RX-LS200 8.1 0.319 t 1.2 t 0.047 EX-10 MQ-W 4.25 0.167 1.4 0.055 3.2 0.126 CX-400 EQ-500 1.25 0.049 3 0.118 Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] are attached. t 1.2 t 0.047 EQ-30 3.2 1.4 0.126 0.055 Beam-receiving part Material: Stainless steel (SUS304) Amplifierseparated CX-440 3.5 0.138 Beam-emitting part Selection Guide Power Supply Built-in (0.7) (0.028) 8.1 0.319 (4.9) (0.193) 20 0.787 6.5 8 3.5 0.256 0.315 0.138 1.4 3.2 0.055 0.126 FA COMPONENTS UV CURING SYSTEMS 20 0.787 t 1.2 t 0.047 15 11 0.591 0.433 0.25 0.010 10 0.394 1.4 1.25 0.055 0.049 3.2 0.126 Beam- 2.5 0.098 receiving part 8 0.315 8 0.315 20 0.787 1.4 0.055 3.2 0.126 3.5 0.138 4.25 0.167 Ultra-slim Photoelectric Sensor DIMENSIONS (Unit: mm in) 332 EX-10 SERIES Ver.2 The CAD data in the dimensions can be downloaded from our website. MS-EX10-13 Sensor mounting bracket (Optional) 7 0.276 1.4 0.055 t 1.2 t 0.047 8 0.315 15 0.591 10.8 0.425 1.4 0.055 3.2 0.126 Mounting drawing with EX-14 (2.75) (0.108) MICRO PHOTOELECTRIC SENSORS t 1.2 t 0.047 AREA SENSORS (0.7) (0.028) LIGHT CURTAINS 4-M2 x 0.4 0.016 thru-hole threads PRESSURE / FLOW SENSORS 13 0.512 5 6.25 0.197 0.246 6.5 0.256 11 0.433 10.8 0.425 2 0.079 Material: Stainless steel (SUS304) Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] and two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached. LASER SENSORS PHOTOELECTRIC SENSORS Assembly dimensions 10.5 0.413 3.2 0.126 FIBER SENSORS 1.75 0.069 3.5 0.138 1.25 0.049 Beam-emitting part Beam-receiving part 10.5 0.413 7 0.276 INDUCTIVE PROXIMITY SENSORS 1.4 3.2 0.055 0.126 SENSOR OPTIONS 3 0.118 11 15 0.433 0.591 4.25 0.167 PARTICULAR USE SENSORS 8 0.315 1.4 0.055 3.2 0.126 SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610