Electromechanical Relays Hasco Component's electromechanical relays range from less than an amp to 80 amps. Hasco's relays are UL and CSA with some TUV ratings. All relays have DC coils and many have an AC coil. They come sealed for wave soldering and washing thereby allowing the relays to be put on any assemble line. There are surface mount low current relays available as well. DPDT-- DIP PC STANDARD OR SENSITIVE2.0 AMP BIFURCATED CONTACT RELAY FEATURES Sensitive available. Fully sealed. File E75887 File LR49291 COIL RATINGS FOR STANDARD CAS 112 Nom. Volt. (VDC) Coil Resist. (Ohms +/-10%) Nom. Curr. (mA) PickUp Volt. (VDC) DropOut Volt. (V) CAS-112-5 5 45 CAS-112-6 6 70 111.0 3.8 0.25 7.8 90.9 4.5 0.3 9.7 9 160 85.7 6.75 0.45 13.5 12 280 43.1 9.0 0.6 19.4 CAS-112-24 24 1070 22.4 18.0 1.2 37.6 CAS-112-48 48 4300 11.1 36.0 2.4 74.2 Relay Code (V) Contact Arrange ment CAS-112-9 DPDT (2 Form C) CAS-112-12 Max. Volt. (VDC) Nom. Pwr (W) Cons 'ption Approx. 0.55 Data Measured at 20C COIL RATINGS FOR SENSITIVE CS 212 Nom. Volt. (VDC) Coil Resist. (Ohms +/-10%) Nom. Curr. (mA) PickUp Volt. (VDC) DropOut Volt. (V) Max. Volt. (VDC) Nom. Pwr (W) Cons 'ption CS-212-3 3 69 43.4 2.25 0.24 9.0 0.13 CS-212-5 5 167 29.9 3.8 0.4 15.0 0.15 CS-212-6 6 240 25.0 4.5 0.48 18.0 0.15 9 540 16.7 6.8 0.72 27.0 0.15 12 960 12.5 9.0 0.96 35.6 0.15 Relay Code (V) CS-212-9 CS-212-12 Contact Arrange ment DPDt (2 Form C) CS-212-18 18 2160 8.3 13.5 1.44 53.4 0.15 CS-212-24 24 3840 6.3 18.0 1.92 70.1 0.15 CS-212-48 48 7680 6.5 36.0 3.84 76.8 0.30 The tolerance is 10% for the resistance value, pull- in voltage and drop-out voltage. The values are at ambient temperature, 20C. RATING PERFORMANCE Specifications Note Contact Arrangement DPDT, 2 Form C Contact Material Gold-clad, Ag-Pd alloy Contact Max. 100 mOhms Max. Switching Power DC 30W AC 50 VA Max. Switching Voltage 125VDC 150VAC Contact Max. Switching Current Operate Time Release Time Time at initial value at resistive load 2A 30VDC 0.6 / 125 VAC 2.5A @ 12V (Type CS) Approx. 5 msec. (Type CAS) Approx. 5 msec. (Type CS) Approx. 3 msec. (Type CAS) Approx. 5 msec. Bounce Time(Operating) Approx. 0.5 to 1 msec. Bounce Time (Releasing) Approx. 02.5 to 3 msec. Insulation Resistance Dielectric Strength FCC Surge Strength 100 M Ohms 1000VAC Between coil and contacts 1000VAC Between open contacts 1500V Between coil and contacts Between Adjacent contacts Vibration Resistance 10g (10 - 55 Hz) Temperature -25C ~ +75C -25C ~ +85C Life Mechanical Life 2 x 107 times Electrical Life 2 x 106 times Weight at 500 VAC, 25C, 50% relative humidity CAS, CS CS CAS, CS at 20mV 1KHz 1mA resistive load 5g DIMENSIONS PART NUMBERS CAS112DC5 CS212DC6 CAS112DC6 CS212DC9 CAS112DC9 CS212DC12 CAS112DC12 CS212DC24 CAS112DC24 CS212DC48 CAS112DC48 CS212DC48B CS212DC5 Home | About Hasco | Our Factory | Reed Relays | ElectromechanicalRelays | Reed Switches/Magnets | Proximity Reed Switches | EZ Relay Design Page | Request Quote | Hasco Reps Hasco Distributors | Site Map Electromechanical Relay- DPDT Relay- DPDT 2 Amp Relay (c) 2010 Hasco Relays and Electronics International Corp.