
ITR8307/F43
Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 3 Page: 9 of 9
Device No:DRX-083-089 Prepared date:2007/8/7 Prepared by: Vic Liao
█Recom mended Method of Storage
The following are general recommendations for moisture sensitive level (MSL) 4 storage and use:
○ Shelf life in sealed bag: 12 months at < 40 °C and < 90% relative humidity (RH)
○ After bag is opened, devices that will be subjected to reflow solder or other high
temperature process must:
a) Mounted within 72 hours of factory conditions < 30 °C/60%RH, or
b) b) Stored at <20% RH
○ Devices require bake, before mounting, if:
Humidity Indicator Card is > 20% when read at 23 ± 5 °C
○ If baking is required, devices may be baked:
a) 192 hours at 40℃,and <5% RH(dry air/nitrogen) or
b) 96 hours at 60℃,and <5% RH for all device containers
c) 24 hours at 125 °C
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.