DF20F-10DP-1H(50) - Hirose Electric

B266

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

DF20 series

DF20A-**DS-1C

Socket

DF20F(G)-**DP-1V

Pin Header

DF20F-****SCFA

Contact

1

Narrower external width and length

Metal fitting

■Features

1. Contact Pitch

1 mm contact pitch allows reliable solder and cable

termination.

2.

Reliable electrical connection wipe

Effective electrical connection is assured with a 1mm wipe of

mating contacts.

3. Narrower external width and length

Redesigned metal fittings decreased the overall length of the

board- mount receptacle and permit end-to-end mounting of

several connectors.

4. Automatic equipment board placement

Straight type pin headers are supplied with a 5.4 mm X 4.6mm

flat platform to allow vacuum pick-up and placement on the

board

.

5. Product variations

(1) Available with 10, 20, 30, 40, and 50 contacts.

(2) Pin headers are available in two types: with or without

board positioning bosses.

(3) Depending on specific application pin headers can be

ordered in straight or right angle types.

■Applications

Notebook PC, small office automation equipment, small

consumer devices, portable devices.

Any application requiring low profile reliable board-to-cable

connection with a AWG #28, AWG#30, AWG#32 conductors.

1mm Pitch, Double Rows

6.2

5.5

DF20F

**DP-1H(59)

DF20A-

**DS-1C

Cable

Socket

PCB

Cable

PCB

5.4 Socket

DF20A-

**DS-1C

Header

5.8

DF20F(G)-

**DP-1V(56)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

DF20 Series●1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

B267

■Product Specifications

Rating

Rated current

Rated voltage

AWG#28 : 1A

AWG#30 : 0.9A

AWG#32 : 0.7A

100V AC

Operating temperature range

Operating humidity range

Storage temperature range

Storage humidity range

-35°C to 85°C (Note 1,2)

-40% to 80%

-10°C to 60°C (Note 2)

-40% to 70%

Note1: Includes temperature rise caused by current flow.

Note2: The term “storage” refers to products stored for long periods of time prior to mounting and use.

Note2: Operating temperature range and Humidity range covers non-conducting conditions of installed connectors in storage,

Note2: shipment or transportation.

Note3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and

specifications for a specific part number shown.

■Materials

Remarks

UL94V-0

----------

UL94V-0

----------

Item Part Material Finish

Socket

Socket contact

Pin header

Insulator

Contact

Insulator

Contact

Metal Fitting

Polyamide

Phosphor bronze

Polyamide

Phosphor bronze

Brass

Color : Beige

Gold plating

Color : Beige

Gold plating

V type: Solder plating

H type: Tin-Copper plating (Pb free)

■Ordering Information

DF20 # - *DS - 1 C

Series name : DF20

Boss Type

■Pin header

■F: Without boss

■G: With boss

■Crimp socket: A

1

Number of contacts: 10, 20, 30, 40, 50

2

3

4

5

Connector type

DS: Double-row socket

DP: Double-row pin header

Contact pitch: 1 mm

Type of housing, header

C: Crimp housing

V: Straight SMT header

H: Right angle SMT header

●Connectors

●Contacts

7

6

F

Applicable wire size

2830: AWG #28 to 30

3032: AWG #30 to 32

Contact & packaging type

SCF: Socket contact reel

Plating type

A: Gold plating

Packaging Specifications

Blank: 1 reel = 10,000 pieces

41: 1 reel = 20,000 pieces

DF20 F - 2830 SCF A ( **)

1

4

2

3

5

Measured at 100V DC

Conduction of 300V AC applied for 1 minute

Measure at 100mA.

Measured with a steel pin of 0.2 ±0.005 thickness

Frequency of 10 to 55 Hz, single amplitude of 0.75 mm, in 3 directions for 2hours

Temperature of 40±2ç, humidity of 90% to 95%, left standing for 96 hours

(-55ç:30min /5çto 35ç: 2 to 3min /85ç:30min /5çto 35ç:2 to 3min ) for 5 cycles

50 cycles

Reflow: At the recommended temperature profile, manual

solder: Soldering iron temperature of 300°C for 3 seconds

500Mømin.

No flashover or insulation breakdown

30Mømax.

0.2 N Min., 2 N Max.

No electrical discontinuity of 1μs min.

Contact resistance of 30mømax., insulation resistance of 100Mømin.

Contact resistance of

30mø

max

,insulation resistance of 500Mømin.

Contact resistance of 30mø max.

No deformation of the insulator parts that will

affect performance

1.

Insulation resistance

2.

Withstanding voltage

3.

Contact resistance

4.

Insertion-Extraction force

4.

(per contact)

5.Vibration

6.Humidity

7.

Temperature cycle

8.

Mechanical operation

9.Resistance to

Soldering heat

Item Specifications Conditions

1 3 52 4 6

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B268

DF20 Series●1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

■Double Row Socket

■Socket Crimp Contacts

CL No.Part Number

Number of Contacts

A B RoHS

686-0020-3

686-0021-6

686-0022-9

686-0023-1

686-0024-4

DF20A-10DS-1C

DF20A-20DS-1C

DF20A-30DS-1C

DF20A-40DS-1C

DF20A-50DS-1C

10

20

30

40

50

17.2

12.2

17.2

22.2

27.2

14.0

19.0

14.0

19.0

24.0

YES

[Specifications number]-*, (**)

(59): Gold plating, embossed tape

packaging

CL No. Product No.

Type of contacts

Quantity Plating type RoHS

686-0042-6-

**

686-0043-9-

**

686-0051-7-

**

DF20F-2830SCFA(**)

DF20F-3032SCFA(**)

DF20F-36SCFA(**)

Reel contacts

See specifications number column Gold plating YES

Contact No. *

P=1

B

A

5

4.28

Contact No. 1

Contact No. 2

5th contact marking

4.1

Contact No. 1 mark

3.3

1.45

2

0.9

0.5

0.7

Unit: mm

Note: Sales quantities are by the package unit (containing 100 pieces). Please order by package unit.

Shown with terminated and installed contacts

Type CL No.

Insulation crimper

Wire crimper

Insulation anvil and wire anvil

901-4572-6-61

901-4572-6-62

901-4572-6-63

Product No.

AP105-DF20-2830S(61)

AP105-DF20-2830S(62)

AP105-DF20-2830S(63)

■

Replacement Parts List for Applicator

[Specifications number] -*, (**)

(04): 10,000 pieces / reel

(44): 20,000 pieces / reel

Applicable Wire Size (Stranded wire conductor)

Jacket diameter

AWG #28 (7/0.127 mm)

AWG #30 (7/0.1 mm)

AWG #32 (7/0.08 mm)

0.5mm to 0.6 mm

Product No.Type CL No.

AP105-DF20-2830S

CM-105

Applicator

Press

901-4572-6

901-0005-4

Note 1:

Hirose Electric will not be responsible for any

problems caused by use of tools other than specified.

Note 2: The manual crimping tool can be also used for

cutting-off individual contacts from the reel.

Note 3: Customers that already have DF13 Series Hirose’s

press units and applicators will be able to use them

for DF20 Series crimp terminations by replacing of

only crimper and anvil.

Note4: The crimping tool for the DF20F-3032SCFA can

also be used with the DF20F-2830SCFA.

Note: When using other than the recommended wire,

contact your nearest Hirose representative.

●Applicable Wire (Tin plated solid soft conductor)

●Applicable Crimping Tools

●

Recommended wire

●UL1571

●Strip length

●1.2 to 1.9 mm

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B269

■Double Row Straight Pin header

BPCB Footprints

D±0.05

4±0.1

7.2±0.1

0.5±0.05

1.9±0.05

1.8±0.1

Ø0.7 +0.1

0

P=1±0.03

A ±0.05

0.85±0.10.9±0.05

0.6±0.05

Contact No.1

Contact No.2

Contact No. **

Contact No. **-1

Contact No.3

0.2

D

C

Ø0.5

0.7

0.2

1.9

A

4.6

5.4

6.4

P=1

A

B

Contact No. 1 marking

Indication of number

of contacts

Note 1:Shaded area must be free of any electrically conductive traces to avoid contact with soldered pin header terminations.

Note 2: Required only for pin headers supplied with the positioning boss.

[Specifications number]-*, (**)

(56): Gold plating, embossed tape

packaging

Unit: mm

Note1: Order embossed tape packaging items by the reel. (1 reel contains 1,000 pieces)

Note2: Vacuum pick-up cap are included with embossed tape packaged connectors.

CL No.

Part Number

No. of contacts

CL686-0032-2-56

CL686-0033-5-56

CL686-0034-8-56

CL686-0035-0-56

CL686-0036-3-56

CL686-0037-6-56

CL686-0038-9-56

CL686-0039-1-56

CL686-0040-0-56

CL686-0041-3-56

DF20F -10DP-1V(56)

DF20F -20DP-1V(56)

DF20F -30DP-1V(56)

DF20F -40DP-1V(56)

DF20F -50DP-1V(56)

DF20G-10DP-1V(56)

DF20G-20DP-1V(56)

DF20G-30DP-1V(56)

DF20G-40DP-1V(56)

DF20G-50DP-1V(56)

10

20

30

40

50

10

20

30

40

50

A B C D Remarks RoHS

14.0

19.0

14.0

19.0

24.0

14.0

19.0

14.0

19.0

24.0

17.3

12.3

17.3

22.3

27.3

17.3

12.3

17.3

22.3

27.3

16.6

11.6

16.6

21.6

26.6

16.6

11.6

16.6

21.6

26.6

----

15.7

10.7

15.7

20.7

25.7

Without boss

YES

With boss

DF20 Series●1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B270

DF20 Series●1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

■Double Row Right angle Pin header

BPCB Footprints

3.8 ±0.05

2.45 +0.1

0

1.4 +0.1

0 1.4 +0.1

0

C ±0.10.75 ±0.1

2.75 ±0.05

A ±0.05

P= ±0.03

0.6 ±0.05

1

B5

A

A6.2

0.2

C

5.5

0.2

P= 1

* *

Indication of

number of

contacts

Contact No.2

Contact No.1

marking

Contact No.3

Contact No.**

Contact No.**-1

Note : Shaded area must be free of any electrically conductive traces to avoid contact with soldered pin header terminations.

[Specifications number]-*, (**)

(59): Gold plating,

embossed tape packaging

Note:Order embossed tape packaging items by the reel. (1 reel contains 1,000 pieces)

Part Number CL No. No. of contacts A B C Remarks RoHS

DF20F -10DP-1H(59)

DF20F -20DP-1H(59)

DF20F -30DP-1H(59)

DF20F -40DP-1H(59)

686-0027-2(59)

686-0028-5(59)

686-0029-8(59)

686-0030-7(59)

10

20

30

40

24.0

29.0

14.0

19.0

27.5

12.5

17.5

22.5

26.2

11.2

16.2

21.2

Without boss YES

Unit: mm

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B271

●Straight pin header

BEmbossed Carrier Tape Dimensions

Part Number No. of

Contacts A B C D

DF20F(G)-10DP-1V(56)

DF20F(G)-20DP-1V(56)

DF20F(G)-30DP-1V(56)

DF20F(G)-40DP-1V(56)

DF20F(G)-50DP-1V(56)

DF20F - 10DP-1H(59)

DF20F - 20DP-1H(59)

DF20F - 30DP-1H(59)

DF20F - 40DP-1H(59)

10

20

30

40

50

10

20

30

40

16

24

32

44

16

24

32

44

--------

28.4

40.4

--------

28.4

40.4

17.5

11.5

14.2

20.2

17.5

11.5

14.2

20.2

16.4

24.4

32.4

44.4

16.4

24.4

32.4

44.4

B ±0.1

R0.75

0.2±0.05

1.7

1.5

(0.4)

(7.4)

C ±0.1

A ±0.3

1.75 ±0.1

12±0.1

2±0.1

4±0.1

Ø1.5

Unreeling direction

+0.1

0

+0.15

0

+0.1

0

2 ±0.5

Product name

label

Ø13 ±0.2

Ø21±0.8

2 ±0.5

(Ø80)

Ø380 ±2

D

Ø1.5 mm diameter

feed hole depth

+2

0

B ±0.1

R0.75

0.2±0.05

1.7

1.5

(0.4)

(7.9)

C ±0.1

A ±0.3

1.75±0.1

12 ±0.1

2 ±0.1

4 ±0.1

Ø1.5

Unreeling direction

+0.15

0

+0.1

0

+0.1

0

●Right angle pin header

●Reel dimensions

DF20 Series●1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B272

DF20 Series●1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

BUsage recommendation

1. Recommended Soldering

Temperature Profile for IR Reflow.

2.

Recommended Manual Soldering Conditions

3.

Recommended Solder Screen Thickness

4. Board Warping

5. Cleaning Conditions

6. Wiring Termination Conditions

7.

Mating / un-mating precautions

Soldering temperature: 290°C ±10°C, Soldering time: within 3 sec.

0.15mm

Maximum of 0.03 mm at the connector center section, with both ends of the connector as reference points.

Refer to "Nylon Connector Use Handbook."

Crimp contacts should be handled with care as not to cause any deformation or damage

affecting the performance or termination.

Excessive twisting and pulling on wires during mating/un-mating should be avoided as it

may cause damage to connectors.

Note 1:

Up to 2 cycles of reflow soldering are possible under the same conditions, provided

that there is a return to normal temperature between the first and second cycle.

Note 2: The temperature indicates the board surface temperature at the points of contacts

with the connector terminals.

DF20F–*DP–1H(59)

Temperature

250

200

150

100

60 to 120(s) 60(s) max

220

240

60 120 180 240 300

10(s) max

Time(S)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.