H16WD Series
• Ratings from 25A to 90A @ 48-660 V AC
• 1600 Volt Blocking
• SCR output for heavy industrial loads
• DC control
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
• Optional LED Status Indicator
PRODUCT SELECTION
Control Voltage 25A 50A 75A 90A
4-32 Vdc H16WD6025 H16WD6050 H16WD6075 H16WD6090
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description 25A 50A 75A 90A
Operating Voltage (47-440Hz) [Vrms] 48-660 48-660 48-660 48-660
Transient Overvoltage [Vpk] 1600 1600 1600 1600
Rated Load Current (2) [Arms] 25 50 75 90
Rated Load Current {UL508 Motor Controller} (2) [Arms] 10 20 30 45
Minimum Load Current [mArms] 150 150 150 150
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 1.0 1.0
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) 500 500 500 500
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 239/250 597/625 954/1000 1145/1200
Maximum I²t for Fusing (50/60Hz) [A² sec] 285/259 1779/1621 4555/4150 6560/5976
Thermal Resistance Junction to Case (Rjc) [°C/W] 1.02 0.63 0.31 0.28
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 1.6
HP rating UL 508/IEC60947[HP (KW)]: 240 VAC 1.5 (1.1) 3 (2.2) 5 (3.7) 7.5 (5.6)
HP rating UL 508/IEC60947[HP (KW)]: 380 VAC 2 (1.5) 5 (3.7) 7.5 (5.6) 15 (11.2)
HP rating UL 508/IEC60947[HP (KW)]: 480 VAC 3 (2.2) 5 (3.7) 10 (7.4) 20 (14.9)
HP rating UL 508/IEC60947[HP (KW)]: 600 VAC 3 (2.2) 10 (7.4) 15 (11.2) 25 (18.6)
Wire Size max (solid/stranded) [AWG/ IEC mm²] 2 x 8/8.4 2 x 8/8.4 2 x 8/8.4 2 x 8/8.4
Output Terminal Screw Torque Range [in lb (Nm) 18-20 (2-2.2) 18-20 (2-2.2) 18-20 (2-2.2) 18-20 (2-2.2)
INPUT SPECIFICATIONS (1)
Description DC Control
Control Voltage Range 4-32 VDC
Must Turn-Off Voltage 1 .0 VDC
Maximum Reverse Voltage 32 VDC
Minimum Input Current @ Minimum Voltage (for on-state) 9mA
Maximum Input Current @ Maximum Voltage 11mA
Nominal Input Impedance See Note 4
Maximum Turn-On Time [msec] (5) 1/2 Cycle
Maximum Turn-Off Time [msec] 1/2 Cycle
Wire Size max (solid/stranded) [AWG/ IEC mm²] 2 x 12 / 3.3
LED Status Indicator (Color) w/G Option (green)
Input Terminal Screw Torque Range: 8-10 in lb (0.9-1.1Nm)
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 V DC) 1010 Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -40 to 80 °C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 3 oz (86.5 g)
Housing Material Thermoplastic Polyester
SSR Mounting Torque Range [in lbs/Nm] 18-20 (2-2.2)
Baseplate Material Aluminum
RoHS Exemption #’s 7(a), 7(c)-I
GENERAL NOTES
GENERAL NOTES
1) All parameters at 40°C and per section unless otherwise specified.
2) Heat sinking required, see derating curves.
3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
4) Input circuitry version incorporates active current limiter.
5) Turn-on time for DC control random turn-on versions is 0.02 msec
WIRING DIAGRAM
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
IEC 61000-4-2 : Electrostatic Discharge – Level 3
IEC 61000-4-4 : Electrically Fast Transients – Level 3 Criteria B
IEC 61000-4-5 : Electrical Surges – Level 3 Criteria B
Rev. 102411
ANNEX - ENVIROMENTAL INFORMATION
