EVALUATION KIT AVAILABLE MAX98300 Mono 2.6W Class D Amplifier General Description Features The MAX98300 mono 2.6W Class D amplifier provides Class AB audio performance with Class D efficiency. This device offers five selectable gain settings (0dB, 3dB, 6dB, 9dB, and 12dB) set by a single gain-select input (GAIN). S Industry-Leading Quiescent Current: 0.78mA at 3.7V, 1.1mA at 5V S Spread Spectrum and Active Emissions Limiting S Five Selectable Gains S Click-and-Pop Suppression Active emissions-limiting edge-rate and overshoot control circuitry greatly reduces EMI. A patented filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices. These features reduce application component count. S Thermal and Overcurrent Protection S Low-Current Shutdown Mode S Space-Saving Packages 2mm x 2mm x 0.8mm, 8-Pin TDFN-EP The MAX98300 industry-leading 0.78mA at 3.7V (1.1mA at 5V) quiescent current extends battery life in portable applications. 1.2mm x 1.2mm, 9-Bump WLP (0.4mm Pitch) The MAX98300 is available in an 8-pin TDFN-EP (2mm x 2mm x 0.8mm) and a 9-bump (1.2mm x 1.2mm) WLP. Both packages are specified over the extended -40NC to +85NC temperature range. Applications Ordering Information Notebook and Netbook Computers PART TEMP RANGE PIN-PACKAGE Cellular Phones MAX98300ETA+ -40NC to +85NC 8 TDFN-EP* MP3 Players MAX98300EWL+ -40NC to +85NC 9 WLP Portable Audio Players +Denotes a lead(Pb)-free/RoHS-compliant package. *EP = Exposed pad. VoIP Phones Typical Application Circuit +2.6V TO +5.5V +2.6V TO +5.5V PVDD SHDN GAIN 0.1F 10F* MAX98300 OUT+ 1F IN+ OUT- 1F IN- PGND *SYSTEM BULK CAPACITANCE For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maximintegrated.com. 19-5234; Rev 0; 7/10 MAX98300 Mono 2.6W Class D Amplifier ABSOLUTE MAXIMUM RATINGS Continuous Power Dissipation (TA = +70NC) for Multilayer Board TDFN-EP (derate 11.9mW/NC)...................................953.5mW WLP (derate 12mW/NC).............................................963.8mW Junction Temperature......................................................+150NC Operating Temperature Range........................... -40NC to +85NC Storage Temperature Range............................. -65NC to +150NC Lead Temperature (soldering, 10s).................................+300NC Soldering Temperature (reflow).......................................+260NC PVDD, IN+, IN-, SHDN, GAIN to PGND..................... -0.3V to 6V All Other Pins to PGND..........................-0.3V to (VPVDD + 0.3V) Continuous Current Into/Out of PVDD, PGND, OUT_.... Q600mA Continuous Input Current (all other pins)......................... Q20mA Duration of Short Circuit Between OUT_ and PVDD, PGND........................................Continuous OUT+ and OUT-.....................................................Continuous Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VPVDD = VSHDN = 5.0V, VPGND = 0V, AV = 12dB (GAIN = PVDD), RL = J, RL connected between OUT+ to OUT-, AC measurement bandwidth 20Hz to 22kHz, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25NC.) (Notes 1, 2) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS 5.5 V VPVDD = 5.0V 1.1 2.0 VPVDD = 3.7V 0.78 VSHDN = 0V, TA = +25NC AMPLIFIER CHARACTERISTICS Speaker Supply Voltage Range PVDD Quiescent Supply Current IDD Shutdown Supply Current ISHDN Inferred from PSRR test 2.6 mA < 0.1 10 FA Turn-On Time tON 3.7 10 ms Bias Voltage VBIAS 1.3 Maximum AC Input Voltage Swing Input Resistance Voltage Gain Output Offset Voltage VIN RIN AV VOS Differential 2.0 Single ended 1.0 Common-Mode Rejection Ratio 2 KCP CMRR VRMS AV = 12dB 10 20 AV = 9dB 10 20 AV = 6dB 10 20 AV = 3dB 15 28 AV = 0dB 26 40 Connect GAIN to PVDD 11.5 12 12.5 Connect GAIN to PVDD through 100kI 5% 8.5 9 9.5 GAIN unconnected 5.5 6 6.5 Connect GAIN to PGND through 100kI 5% 2.5 3 3.5 Connect GAIN to PGND -0.5 0 +0.5 Q1 Q3 TA = +25C TA = +25C (Note 3) Into shutdown Click and Pop V Peak voltage, A-weighted, 32 samples per second, Out of shutdown RL = 8I (Notes 3, 4) -66 fIN = 1kHz, input referred 50 -66 kI dB mV dBV dB Maxim Integrated MAX98300 Mono 2.6W Class D Amplifier ELECTRICAL CHARACTERISTICS (continued) (VPVDD = VSHDN = 5.0V, VPGND = 0V, AV = 12dB (GAIN = PVDD), RL = J, RL connected between OUT+ to OUT-, AC measurement bandwidth 20Hz to 22kHz, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25NC.) (Notes 1, 2) PARAMETER Power-Supply Rejection Ratio (Note 3) SYMBOL CONDITIONS VPVDD = 2.6V to 5.5V, TA = +25NC PSRR VRIPPLE = 200mVP-P fIN = 1kHz, RL = 4I Output Power Oscillator Frequency TYP 50 70 f = 217Hz f = 20kHz 63 THD+N = 1% 2.1 dB 2.6 THD+N = 1% 1.35 THD+N = 10% 1.65 THD+N = 1%, VPVDD = 3.7V 0.71 THD+N = 10%, VPVDD = 3.7V 0.89 RL = 4I POUT = 1W 0.05 % RL = 8I POUT = 0.5W 0.04 % fOSC 300 kHz kHz E POUT = 1.3W, RL = 8I 10 89 AV = 0dB, A-weighted (Note 3) 36 FVRMS POUT THD+N Noise VN Output Current Limit fIN = 1kHz ILIM Thermal Shutdown Level Thermal Shutdown Hysteresis DIGITAL INPUT (SHDN) Input-Voltage High VINH Input-Voltage Low VINL Input Leakage Current UNITS 67 Spread-Spectrum Bandwidth Efficiency MAX THD+N = 10% fIN = 1kHz, RL = 8I Total Harmonic Distortion Plus Noise MIN W % 2 A +160 NC 20 NC 1.4 TA = +25NC V 0.4 V Q10 FA Note 1: All devices are 100% production tested at +25NC. All temperature limits are guaranteed by design. Note 2: Testing performed with a resistive load in series with an inductor to simulate an actual speaker load. For RL = 4I, L = 33FH. For RL = 8I, L = 68FH. Note 3: Amplifier inputs AC-coupled to ground. Note 4: Mode transitions controlled by SHDN. Maxim Integrated 3 MAX98300 Mono 2.6W Class D Amplifier Typical Operating Characteristics (VPVDD = VSHDN = 5.0V, VPGND = 0V, AV = 12dB, RL = J, unless otherwise specified, RL connected between OUT+ to OUT-, AC measurement bandwidth 20Hz to 22kHz, TA = +25NC, unless otherwise noted.) THD+N vs. FREQUENCY RL = 4I + 33FH VPVDD = 3.7V POUT = 800mW 0.1 0.01 POUT = 200mW 10 100 0.001 0.01 0.1 FREQUENCY (kHz) THD+N vs. FREQUENCY RL = 8I + 68FH VPVDD = 3.7V POUT = 100mW 1 10 fIN = 100Hz 100 0 0.5 FREQUENCY (kHz) 1.0 1.5 2.0 2.5 10 RL = 8I + 68FH VPVDD = 3.7V 1 fIN = 6kHz 1 fIN = 1kHz fIN = 1kHz 0.9 1.2 OUTPUT POWER (W) 1.5 1.0 1.2 1.4 1.6 VPVDD = 5.0V 90 80 70 RL = 8I + 68FH RL = 4I + 33FH 60 50 40 10 fIN = 100Hz 1.8 0.8 20 fIN = 100Hz 0.01 0.6 30 0.1 0.6 0.2 0.4 EFFICIENCY vs. OUTPUT POWER 100 EFFICIENCY (%) THD+N (%) fIN = 6kHz 0.3 0 3.0 OUTPUT POWER (W) 10 0 fIN = 100Hz THD+N vs. OUTPUT POWER 100 MAX98300 toc07 RL = 8I + 68FH VPVDD = 5.0V 0.1 fIN = 1kHz OUTPUT POWER (W) THD+N vs. OUTPUT POWER 100 fIN = 6kHz 1 0.01 MAX98300 toc08 0.1 100 10 0.1 0.01 10 RL = 4I + 33H VPVDD = 3.7V fIN = 1kHz POUT = 600mW 0.001 1 THD+N vs. OUTPUT POWER fIN = 6kHz 1 0.1 0.01 0.1 100 THD+N (%) THD+N (%) 10 0.1 0.01 FREQUENCY (kHz) RL = 4I + 33H VPVDD = 5.0V 0.01 THD+N (%) 100 THD+N vs. OUTPUT POWER 1 THD+N (%) 10 100 MAX98300 toc04 10 1 FREQUENCY (kHz) MAX98300 toc05 1 POUT = 150mW 0.001 MAX98300 toc06 0.001 0.1 POUT = 1.2W 0.01 POUT = 400mW 0.01 0.1 MAX98300 toc09 POUT = 1.2W 0.1 RL = 8I + 68FH VPVDD = 5.0V 1 THD+N (%) THD+N (%) 1 0.01 4 THD+N vs. FREQUENCY 10 MAX98300 toc02 1 THD+N (%) 10 MAX98300 toc01 RL = 4I + 33FH VPVDD = 5.0V MAX98300 toc03 THD+N vs. FREQUENCY 10 0.01 0 0.2 0.4 0.6 OUTPUT POWER (W) 0.8 1.0 0 0 0.4 0.8 1.2 1.6 2.0 2.4 OUTPUT POWER (W) Maxim Integrated MAX98300 Mono 2.6W Class D Amplifier Typical Operating Characteristics (continued) (VPVDD = VSHDN = 5.0V, VPGND = 0V, AV = 12dB, RL = J, unless otherwise specified, RL connected between OUT+ to OUT-, AC measurement bandwidth 20Hz to 22kHz, TA = +25NC, unless otherwise noted.) RL = 4I + 33FH 60 50 40 30 1% THD+N 2.5 2.0 1.5 1.2 0.8 0.6 0.4 10 0.5 0.2 0 0 0 1 1000 OUTPUT POWER vs. SUPPLY VOLTAGE OUTPUT POWER vs. SUPPLY VOLTAGE 1.0 1.2 1.4 RL = 4I + 33FH 2.00 1.75 10% THD+N 1% THD+N 0.75 1.75 1.50 1.25 1.00 0.25 0.25 0 3.0 10% THD+N 3.5 4.5 4.0 SUPPLY VOLTAGE (V) 5.0 -20 3.0 3.5 4.5 4.0 SUPPLY VOLTAGE (V) 5.0 5.5 0.01 0.1 1 10 100 FREQUENCY (kHz) GAIN vs. FREQUENCY 20 15 AV = 12dB AMPLITUDE (dB) -30 CMRR (dB) -40 MAX98300 toc17 INPUT REFERRED -30 -80 2.5 MAX98300 toc16 -10 -20 -70 COMMON-MODE REJECTION RATION vs. FREQUENCY 0 VRIPPLE = 200mVP-P VPVDD = 5.0V -10 -60 1% THD+N 0 5.5 0 -50 0.75 0.50 1000 1.0 100 LOAD RESITANCE (I) POWER-SUPPLY REJECTION RATIO vs. FREQUENCY 2.00 0.50 2.5 RL = 8I + 68FH 2.50 2.25 OUTPUT POWER (W) 2.50 2.25 1.50 1.25 1.00 3.00 2.75 1 PSRR (dB) 0.8 MAX98300 toc13 3.00 2.75 0.6 MAX98300 toc14 OUTPUT POWER (W) 1.0 100 LOAD RESITANCE (I) 0.4 1% THD+N 1.0 1.0 0.2 10% THD+N 1.4 20 0 OUTPUT POWER (W) 3.0 1.6 MAX98300 toc15 RL = 8I + 68FH 10% THD+N 3.5 PVDD = 3.7V 1.8 OUTPUT POWER (W) 70 4.0 OUTPUT POWER (W) EFFICIENCY (%) 80 PVDD = 5V 4.5 2.0 MAX98300 toc11 VPVDD = 3.7V 90 5.0 MAX98300 toc10 100 OUTPUT POWER vs. LOAD RESISTANCE MAX98300 toc12 OUTPUT POWER vs. LOAD RESISTANCE EFFICIENCY vs. OUTPUT POWER -40 -50 -60 -70 AV = 9dB 10 AV = 6dB 5 AV = 3dB AV = 0dB 0 -80 -90 0.01 0.1 1 FREQUENCY (kHz) Maxim Integrated 10 100 -5 0.01 0.1 1 10 FREQUENCY (kHz) 100 5 MAX98300 Mono 2.6W Class D Amplifier Typical Operating Characteristics (continued) (VPVDD = VSHDN = 5.0V, VPGND = 0V, AV = 12dB, RL = J, unless otherwise specified, RL connected between OUT+ to OUT-, AC measurement bandwidth 20Hz to 22kHz, TA = +25NC, unless otherwise noted.) STARTUP WAVEFORM SHUTDOWN WAVEFORM MAX98300 toc19 MAX98300 toc18 OUT_ OUT_ SHDN SHDN 1ms/div 1ms/div -40 -60 -80 -100 -60 -80 -100 -120 -140 10 1 100 0.1 0.01 1000 1 10 100 FREQUENCY (MHz) FREQUENCY (kHz) SUPPLY CURRENT vs. SUPPLY VOLTAGE SHUTDOWN SUPPLY CURRENT vs. SUPPLY VOLTAGE 12 MAX98300 toc22 1.4 RL = RL = 10 SUPPLY CURRENT (nA) 1.2 SUPPLY CURRENT (mA) -40 -160 -120 1.0 0.8 0.6 0.4 8 6 4 2 0.2 0 0 2.5 3.0 3.5 4.0 4.5 SUPPLY VOLTAGE (V) 6 f = 1kHz VOUT = -60dBV MAX98300 toc23 OUTPUT MAGNITUDE (dBV) -20 -20 OUTPUT MAGNITUDE (dBV) MAX98300 toc20 RBW = 30Hz 0 MAX98300 toc21 INBAND OUTPUT SPECTRUM WIDEBAND OUTPUT SPECTRUM 0 5.0 5.5 2.5 3.0 3.5 4.0 4.5 5.0 5.5 SUPPLY VOLTAGE (V) Maxim Integrated MAX98300 Mono 2.6W Class D Amplifier Pin Configurations TOP VIEW (BUMP SIDE DOWN) MAX98300 1 2 3 PVDD OUT+ OUT- PGND + 8 A PVDD PGND IN+ B OUT+ N.C. IN- C OUT- SHDN GAIN 7 6 5 MAX98300 EP* + WLP (1.2mm x 1.2mm, 0.4mm pitch) 1 2 IN+ IN- 3 4 SHDN GAIN TDFN (2mm x 2mm) *EP = EXPOSED PAD. CONNECT EP TO PGND TO ENHANCE THERMAL DISSIPATION Pin Description PIN TDFN-EP WLP 1 A3 NAME IN+ 2 B3 IN- 3 C2 4 FUNCTION Noninverting Audio Input Inverting Audio Input C3 SHDN GAIN Active-Low Shutdown Input. Drive SHDN low to place the device in shutdown mode. Gain Selection. See Table 1 for gain settings. 5 A2 PGND Power Ground 6 C1 OUT- Negative Speaker Output 7 B1 OUT+ Positive Speaker Output 8 A1 PVDD Power Supply. Bypass PVDD to PGND with 0.1FF and 10FF capacitors. -- B2 N.C. -- -- EP Maxim Integrated No Connection Exposed Pad (TDFN only). Connect exposed pad to a solid ground plane. 7 MAX98300 Mono 2.6W Class D Amplifier Detailed Description Maxim's patented spread-spectrum modulation mode flattens wideband spectral components, while proprietary techniques ensure that the cycle-to-cycle variation of the switching period does not degrade audio reproduction or efficiency. The MAX98300's spread-spectrum modulator randomly varies the switching frequency by Q10kHz around the center frequency (300kHz). Above 10MHz, the wideband spectrum looks like noise for EMI purposes (Figure 1). The MAX98300 features industry-leading quiescent current, low-power shutdown mode, comprehensive clickand-pop suppression, and excellent RF immunity. The device offers Class AB audio performance with Class D efficiency in a minimal board-space solution. The Class D amplifier features spread-spectrum modulation, edge-rate, and overshoot control circuitry that offers significant improvements to switch-mode amplifier radiated emissions. Speaker Current Limit If the output current of the speaker amplifier exceeds the current limit (2A typ), the MAX98300 disables the outputs for approximately 130Fs. At the end of 130Fs, the outputs are re-enabled. If the fault condition still exists, the MAX98300 continues to disable and re-enable the outputs until the fault condition is removed. The MAX98300 amplifier features click-and-pop suppression that reduces audible transients on startup and shutdown. The amplifier includes thermal overload and short-circuit protection. Class D Speaker Amplifier Selectable Gain The MAX98300 filterless Class D amplifier offers much higher efficiency than Class AB amplifiers. The high efficiency of a Class D amplifier is due to the switching operation of the output stage transistors. Any power loss associated with the Class D output stage is mostly due to the I2R loss of the MOSFET on-resistance and quiescent current overhead. The MAX98300 offers five programmable gain selections through a single gain input (GAIN). Table 1. Gain Control Configuration GAIN PIN Ultra-Low EMI Filterless Output Stage Traditional Class D amplifiers require the use of external LC filters, or shielding, to meet EN55022B electromagnetic-interference (EMI) regulation standards. Maxim's patented active emissions-limiting edge-rate control circuitry and spread-spectrum modulation reduces EMI emissions, while maintaining up to 89% efficiency. MAXIMUM GAIN (dB) Connect to PVDD 12 Connect to PVDD through 100kI 5% 9 Not connected 6 Connect to PGND through 100kI 5% 3 Connect to PGND 0 50 EN55022B LIMIT AMPLITUDE (dBV/m) 40 30 20 10 0 -10 30 100 200 300 400 500 600 700 800 900 1000 FREQUENCY (MHz) Figure 1. EMI with 60cm of Speaker Cable and No Output Filtering 8 Maxim Integrated MAX98300 Mono 2.6W Class D Amplifier Shutdown The MAX98300 features a low-power shutdown mode, drawing less than 0.1FA of supply current. Drive SHDN low to put the MAX98300 into shutdown. Click-and-Pop Suppression The MAX98300 speaker amplifier features Maxim's comprehensive click-and-pop suppression. During startup, the click-and-pop suppression circuitry reduces any audible transient sources internal to the device. When entering shutdown, the differential speaker outputs ramp down to PGND quickly and simultaneously. Applications Information Filterless Class D Operation Assuming zero source impedance with a gain setting of AV = 6dB, 9dB, or 12dB, CIN is: = CIN 8 f -3dB [F] with a gain setting of AV = 3dB, CIN is: = CIN 5.7 [F] f -3dB with a gain setting of AV = 0dB, CIN is: = CIN 4 [F] f -3dB Traditional Class D amplifiers require an output filter. The filter adds cost, size, and decreases efficiency and THD+N performance. The MAX98300's filterless modulation scheme does not require an output filter (Figure 1). where f-3dB is the -3dB corner frequency. Use capacitors with adequately low voltage-coefficient for best lowfrequency THD performance. Because the switching frequency of the MAX98300 is well beyond the bandwidth of most speakers, voice coil movement due to the switching frequency is very small. Use a speaker with a series inductance > 10FH. Typical 8I speakers exhibit series inductances in the 20FH to 100FH range. Proper layout and grounding are essential for optimum performance. Good grounding improves audio performance and prevents switching noise from coupling into the audio signal. Component Selection Speaker Amplifier Power Supply Input (PVDD) PVDD powers the speaker amplifier. PVDD ranges from 2.6V to 5.5V. Bypass PVDD with a 0.1FF and 10FF capacitor to PGND. Apply additional bulk capacitance at the device if long input traces between PVDD and the power source are used. Input Filtering The input-coupling capacitor (CIN), in conjunction with the amplifier's internal input resistance (RIN), forms a highpass filter that removes the DC bias from the incoming signal. These capacitors allow the amplifier to bias the signal to an optimum DC level. Maxim Integrated Layout and Grounding Use wide, low-resistance output traces. As load impedance decreases, the current drawn from the device outputs increase. At higher current, the resistance of the output traces decreases the power delivered to the load. For example, if 2W is delivered from the speaker output to a 4I load through a 100mI trace, 49mW is consumed in the trace. If power is delivered through a 10mI trace, only 5mW is consumed in the trace. Wide output, supply, and ground traces also improve the power dissipation of the device. The MAX98300 is inherently designed for excellent RF immunity. For best performance, add ground fills around all signal traces on top or bottom PCB planes. The MAX98300 TDFN-EP package features an exposed thermal pad on its underside. This pad lowers the package's thermal resistance by providing a heat conduction path from the die to the PCB. Connect the exposed thermal pad to the ground plane by using a large pad and multiple vias. 9 MAX98300 Mono 2.6W Class D Amplifier Functional Diagram 2.6V TO 5.5V 0.1F 10F* PVDD 8 (A1) SHDN 3 (C2) UVLO/POWER MANAGEMENT CLICK-AND-POP SUPPRESSION PVDD GAIN 4 (C3) LOW EMI DRIVER 1F 1F (B1) 7 OUT+ (C1) 6 OUT- IN+ 1 (A3) PGND CLASS D MODULATOR IN- 2 (B3) PVDD LOW EMI DRIVER MAX98300 PGND 5 (A2) PGND *SYSTEM BULK CAPACITANCE. ( ) WLP PACKAGE Chip Information PROCESS: CMOS 10 Maxim Integrated MAX98300 Mono 2.6W Class D Amplifier Package Information For the latest package outline information and land patterns, go to www.maximintegrated.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE CODE OUTLINE NO. LAND PATTERN NO. 8 TDFN-EP T822+2 21-0168 90-0065 9 WLP W91B1+7 21-0459 -- 8L TDFN EXPOSED PADS.EPS PACKAGE TYPE PACKAGE OUTLINE 8L TDFN EXPOSED PAD, 2x2x0.80mm 21-0168 E 1 2 COMMON DIMENSIONS SYMBOL A MIN. MAX. 0.70 0.80 D 1.90 2.10 E 1.90 2.10 A1 0.00 0.05 L 0.20 0.40 k 0.25 MIN. A2 0.20 REF. Maxim Integrated PACKAGE VARIATIONS 11 MAX98300 Mono 2.6W Class D Amplifier Package Information (continued) PACKAGE OUTLINE For the latest package outline information and land patterns, go to www.maximintegrated.com/packages. that a "+", "#", or "-" 8L TDFN EXPOSED Note PAD, 2x2x0.80mm in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing 1pertains 21-0168 E 2 to the package regardless of RoHS status. COMMON DIMENSIONS SYMBOL A MIN. MAX. 0.70 0.80 D 1.90 2.10 E 1.90 2.10 A1 0.00 0.05 L 0.20 0.40 k 0.25 MIN. A2 0.20 REF. PACKAGE VARIATIONS PKG. CODE N D2 E2 e b r [(N/2)-1] x e T822-1 8 0.700.10 1.300.10 0.50 TYP. 0.250.05 0.125 1.50 REF T822-2 8 0.800.10 1.200.10 0.50 TYP. 0.250.05 0.125 1.50 REF PACKAGE OUTLINE 8L TDFN EXPOSED PAD, 2x2x0.80mm 21-0168 12 E 2 2 Maxim Integrated MAX98300 Mono 2.6W Class D Amplifier Package Information (continued) For the latest package outline information and land patterns, go to www.maximintegrated.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. Maxim Integrated 13 MAX98300 Mono 2.6W Class D Amplifier Revision History REVISION NUMBER REVISION DATE 0 7/10 DESCRIPTION Initial release PAGES CHANGED -- Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. 14 (c) Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000 2010 Maxim Integrated Products, Inc. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: MAX98300ETA+T MAX98300EWL+T