MCH-068TAN-01ATR30 - 3M

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering inform at io n cal l

800-225-5373

3M™ PC Card Header

Single Slot, No Ejector MCH Series

Physical

Electrical

Environmental

Insulation Material: LCP

Insulation Flammability: UL 94V-0

Insulation Color: Black

Contact Material: Copper Alloy

Plating Underplating: 50 μ″ [ 1.27 μm ] Nickel

Plating Wiping Area: Gold flash over 27 μ″ [ 0.68 μm ] PdNi

Plating Solder Tails: 100 μ″ [ 2.54 μm ] Tin/Lead or Reflowed Tin (See Ordering Informatio n)

Mechanical:

Durability-Office Environment: 10,000 cycles minimum

Insertion Force: 8.8 lbs. ( 39.2 N ) maximum

Extraction Force: 1.5 lbs. ( 6.67 N ) minimum and 8.8 lbs. ( 39.2 N ) maximum

Current Rating: 0.5 A

Insulation Resistance: > 5 × 109Ω at 500 VDC

Withstanding Voltage: 500 VRMS for 1 Minute

Temperature Rating:

Operating Environment: -20°C to +60°C, 95% RH Non-condensing

Process Temperature: 260°C (per J-STD-020C)

TS-1108-C

Sheet 1 of 3

Date Modified: August 8, 2008

• Meets PCMCIA specifications

• Tapered header pins provide easy insertion

• High temperature plastic insulator

• Solder retention clips option for secure hold-down

• Stand-off height options

• ESD clips available

• See Regulatory Information Appendix (RIA) for

chemical compliance information

UL File No.: E68080

DISCONTINUED

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ PC Card Header

Single Slot, No Ejector MCH Series

TS-1108-B

Sheet 2 of 3

Ordering Information MCH - 068TAN - XX X X - XX

ESD/Solder Retention Clips

A = No ESD, no solder retention clips

B = No ESD, solder retention clips

C = ESD, no solder retention clips

D = ESD, solder retention clips

E = ESD, metal solder retention clips

Keying

Blank = 5.0 volt

3 = 3.3 volt

Insulator Body Style

01 = 1.38 mm standoff

02 = 4.0 mm standoff

03 = 7.0 mm standoff

Plating Suffix:

TR30 = PdNi w/ Au flash and Sn-Pb solder tails (RIA E3 & C2 apply)

LL = PdNi w/ Au flash and Sn solder tails (RIA E1 & C1 apply)

XXXX

2.345

59.56

.137 ±.004

3.48 ±0.10

DETECT P INS

.167 ±.004

4.24 ±0.10

GENERAL USE P INS

.197 ±.004

5.00 ±0.10

POW ER PINS

1.378

35.00

.301

7.65

.482

12.24

.732

18.59

.032

0.83

.182

4.61

.919

23.34

2.015

51.18

2.018

51.26 .065

1.65

.223

5.66

45° ±5°

1.650

41.91

.050

1.27

A2.134

54.20 .055

1.40

RETENT EXTENSION

INTO BOARD (OPTIONAL)

.050

1.27

.138

3.51 PIN 1

PIN 35

PIN 36

PIN 34

PIN 68

PIN 67

PIN 5 1

PIN 17

DISCONTINUED

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ PC Card Header

Single Slot, No Ejector MCH Series

TS-1108-B

Sheet 3 of 3

Part Description Standoff

Hei

ht PC Board To

Center Line Total Component

Hei

ESD/Retention Clip Option B D B D

MCH-068TAN01XX-XX .161 [4.09] .175 [4.44] .079 [2.01] .065 [1.65] .054 [1.37] .152 [3.87] .251 [6.37]

MCH-068TAN02XX-XX .264 [6.71] .278 [7.06] .086 [2.18] .072 [1.83] .157 [4.00] .256 [6.50] .354 [9.00]

MCH-068TAN03XX-XX .382 [9.70] .396 [10.06] .108 [2.74] .094 [2.39] .275 [7.00] .374 [9.50] .472 [12.0]

Retention Clip Extention

Into board

Dim A" PCB To Hardware

Seating Plane "

SECTION A-A

HARDWARE

SEATING PLANE

.065

1.65 .140

3.56

.215

5.46 .290

7.37

.118 ±.010

3.00 ±0.25

"A"2X

R.030

0.76

.385

9.78

STANDOFF HEIGHT

(OPTIONAL)

PC BOA RD TO

CENTER L INE

COMPONENT

TOTAL

HEIGHT

RECOMMENDED MOUNTING HOLE LAYOUT

INS ER T CA RD

2.195

55.75

2.018

51.26

1.650

41.91

.075

1.91

.075

1.90

.075

1.90

.185

4.70

.165

4.19 .050

1.27

O.039 ±.002

0.99 ±0.05

lO.002 [0.05] MAB .339

8.61

.455

11.56

PIN 6 7

PI N 68

PIN 3 3

PIN 34

PIN 1

PIN 2

PIN 35

PI N 36

- A -

- B -

STA NDOFF FOOTP RINT

NO COMPONENTS

O.002 ±.002

0.05 ±0.05

PLATED THRU TO GROUND

lO.002 [0.05] MAB

DISCONTINUED

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in

excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/

EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in

excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/

EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon

information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/17/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in

excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision

2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in

writing, this information represents 3M’s best knowledge and belief based upon information provided by third party

suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217-A

DISCONTINUED

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits

for Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,

means that the product or part does not contain any of the following substances in excess of the following maximum

concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,

polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise

stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by

third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits

for Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,

means that the product or part does contain a substance, as detailed in the chart below, in excess of the following

maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent

chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless

otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform

with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in

accordance with the product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the

accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended

application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s

current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in

writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO

OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s

option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for

any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Name and Content of Hazardous Substances or Elements

Electronic Solutions Division

6801 River Place Blvd.

Austin, TX 78726-9000

800/225-5373

www.3M.com/interconnects RIA-2217-A

DISCONTINUED