NC7SZ14 TinyLogic(R) UHS Inverter with Schmitt Trigger Input Features Description Ultra-High Speed: tPD 3.7ns (Typical) into 50pF at 5V VCC High Output Drive: 24mA at 3V VCC Power Down High Impedance Inputs/Outputs The NC7SZ14 is a single inverter with Schmitt trigger input from Fairchild's Ultra-High Speed (UHS) series of TinyLogic(R). The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and outputs are high-impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. Proprietary Noise/EMI Reduction Circuitry Broad VCC Operating Range: 1.65V to 5.5V Matches Performance of LCX when Operated at 3.3V VCC Over-Voltage Tolerance Inputs Facilitate 5V to 3V Translation Ultra-Small MicroPakTM Packages Space-Saving SOT23 and SC70 Packages Ordering Information Operating Temperature Top Mark Eco Status NC7SZ14M5X -40 to +85C 7Z14 RoHS 5-Lead, SOT23, JEDEC MO-178, 1.6mm 3000 Units on Tape & Reel NC7SZ14P5X -40 to +85C Z14 RoHS 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3000 Units on Tape & Reel NC7SZ14L6X -40 to +85C B6 RoHS 6-Lead MicroPakTM, 1.00mm Wide 5000 Units on Tape & Reel NC7SZ14FHX -40 to +85C B6 Green 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel Part Number Package Packing Method For Fairchild's definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 www.fairchildsemi.com NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input January 2010 IEEC/IEC Figure 1. Logic Symbol Pin Configurations Figure 2. SOT23 and SC70 (Top View) Figure 3. MicroPak (Top Through View) Pin Definitions Pin # SOT23 and SC70 Pin # MicroPak Name 1 1, 5 NC 2 2 A 3 3 GND Ground Output 4 4 Y 5 6 VCC Description NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input Connection Diagrams No Connect Input Supply Voltage Function Table Y= /A Inputs Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VIN VOUT Parameter Min. Max. Unit Supply Voltage -0.5 6.0 V DC Input Voltage -0.5 6.0 V DC Output Voltage -0.5 6.0 V IIK DC Input Diode Current IOK DC Output Diode Current IOUT DC Output Current ICC or IGND TSTG VIN < -0.5V -50 VIN > 6.0V +20 VOUT < -0.5V -50 VOUT > 6.0V, VCC=GND +20 DC VCC or Ground Current Storage Temperature Range -65 TJ Junction Temperature Under Bias TL Junction Lead Temperature (Soldering, 10 Seconds) PD ESD Power Dissipation at +85C mA mA 50 mA 50 mA +150 C +150 C +260 C SOT-23 200 SC70-5 150 MicroPak-6 130 MicroPak2-6 120 Human Body Model, JEDEC:JESD22-A114 4000 Charge Device Model, JEDEC:JESD22-C101 2000 mW V NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input Absolute Maximum Ratings Recommended Operating Conditions(1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol VCC VIN VOUT TA Parameter Conditions Min. Max. Supply Voltage Operating 1.65 5.50 Supply Voltage Data Retention 1.5 5.5 V Input Voltage 0 5.5 V Output Voltage 0 VCC V -40 +85 C Operating Temperature SOT-23 JA Unit Thermal Resistance 300 SC70-5 425 MicroPak-6 500 MicroPak2-6 560 C/W Note: 1. Unused inputs must be held HIGH or LOW. They may not float. (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 www.fairchildsemi.com 3 Symbol VP VN VH Parameter Positive Threshold Voltage Negative Threshold Voltage Hysteresis Voltage VCC (V) Typ. Max. Min. Max. 1.65 0.60 1.00 1.40 0.60 1.40 1.80 0.70 1.10 1.50 0.70 1.50 2.30 1.00 1.40 1.80 1.00 1.80 3.00 1.30 1.75 2.20 1.30 2.20 4.50 1.90 2.45 3.10 1.90 3.10 5.50 2.20 2.90 3.60 2.20 3.60 1.65 0.20 0.50 0.80 0.20 0.80 1.80 0.25 0.55 0.90 0.25 0.90 2.30 0.40 0.75 1.15 0.40 1.15 3.00 0.60 1.00 1.50 0.60 1.50 4.50 1.00 1.43 2.00 1.00 2.00 5.50 1.20 1.70 2.30 1.20 2.30 1.65 0.10 0.48 0.90 0.10 0.90 1.80 0.15 0.54 1.00 0.15 1.00 2.30 0.25 0.65 1.10 0.25 1.10 3.00 0.40 0.77 1.20 0.40 1.20 4.50 0.60 1.01 1.50 0.60 1.50 1.70 0.70 1.70 5.50 0.70 1.18 1.65 1.55 1.65 1.55 1.70 1.80 1.70 2.20 2.30 2.20 3.00 2.90 3.00 2.90 4.50 4.40 4.50 4.40 2.30 HIGH Level Output Voltage VIN=VIL, IOH=-100A 1.65 IOH=-4mA 1.29 1.52 1.29 2.30 IOH=-8mA 1.90 2.15 1.90 3.00 IOH=-16mA 2.40 2.80 2.40 3.00 IOH=-24mA 2.30 2.68 2.30 4.50 IOH=-32mA 3.80 4.20 3.80 1.65 0.00 0.10 0.10 0.00 0.10 0.10 0.00 0.10 0.10 0.00 0.10 0.10 VIN=VIH, IOL=100A 3.00 IIN LOW Level Output Voltage Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 4.50 1.65 IOL=4mA Units V V V 1.80 2.30 VOL TA=-40 to +85C Min. 1.80 VOH TA=+25C Conditions 0.00 0.10 0.10 0.08 0.24 0.24 V 2.30 IOL=8mA 0.10 0.30 0.30 3.00 IOL=16mA 0.15 0.40 0.40 3.00 IOL=24mA 0.22 0.55 0.55 4.50 IOL=32mA 0.22 0.55 0.55 0.1 1.0 A 1 10 A 1.0 10 A 0 to 5.5 0 1.65 to 5.50 VIN=5.5V, GND VIN or VOUT=5.5V VIN=5.5V, GND NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input DC Electrical Characteristics www.fairchildsemi.com 4 Symbol Parameter VCC (V) Conditions Min. Propagation Delay CPD Max. Min. 2.0 9.1 15.0 2.0 15.6 2.0 7.6 12.5 2.0 13.0 1.0 5.0 9.0 1.0 9.5 1.0 3.7 6.3 1.0 6.5 CL=15pF, RL=1M 3.30 0.30 5.00 0.50 0.5 3.1 5.2 0.5 5.5 3.30 0.30 1.5 4.4 7.2 1.5 7.5 0.8 3.7 5.9 0.8 6.2 CL=50pF, RL=500 Input Capacitance 0.00 4 Power Dissipation Capacitance(2) 3.30 24 5.00 30 Units Figure Max. 1.65 5.00 0.50 CIN Typ. 1.80 2.50 0.20 tPLH, tPHL TA=-40 to +85C TA=+25C Figure 4 Figure 5 ns Figure 4 Figure 5 pF Figure 6 Note: 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic operating current by the expression: ICCD=(CPD)(VCC)(fIN)+(ICCstatic). NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input AC Electrical Characteristics Note: 3. CL includes load and stray capacitance; Input PRR=1.0MHz; tW =500ns Figure 4. AC Test Circuit Figure 5. AC Waveforms Note: 4. Input=AC Waveform; tr=tf=1.8ns; PRR=10MHz; Duty Cycle =50%. Figure 6. ICCD Test Circuit (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 www.fairchildsemi.com 5 NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input Physical Dimensions 3.00 2.80 5 SYMM CL 0.95 0.95 A 4 B 3.00 2.60 1.70 1.50 1 2 2.60 3 (0.30) 1.00 0.50 0.30 0.95 0.20 1.90 C A B 0.70 TOP VIEW LAND PATTERN RECOMMENDATION SEE DETAIL A 1.30 0.90 1.45 MAX 0.15 0.05 0.22 0.08 C 0.10 C NOTES: UNLESS OTHEWISE SPECIFIED GAGE PLANE A) THIS PACKAGE CONFORMS TO JEDEC MO-178, ISSUE B, VARIATION AA, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) MA05Brev5 0.25 8 0 0.55 0.35 0.60 REF SEATING PLANE Figure 7. 5-Lead SOT23, JEDEC MO-178 1.6mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/packaging/SOT23-5L_tr.pdf. Package Designator M5X (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 6 NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input Physical Dimensions (Continued) Figure 8. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf. Package Designator P5X (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 7 NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input Physical Dimensions (Continued) 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.49) 5X 1.00 (0.75) (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 0.25 0.15 6X 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X BOTTOM VIEW DETAIL A PIN 1 TERMINAL 0.075 X 45 CHAMFER (0.13) 4X Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 9. 6-Lead, MicroPakTM, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specification Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf. Package Designator L6X (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 8 NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input Physical Dimensions (Continued) DETAIL A 5X Figure 10. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specification Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf. Package Designator FHX (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 9 NC7SZ14 -- TinyLogic(R) UHS Inverter with Schmitt Trigger Input (c) 1996 Fairchild Semiconductor Corporation NC7SZ14 * Rev. 1.0.3 www.fairchildsemi.com 10