C B A REV. 03 04 05 06 07 08 AVAILABLE BY SPECIAL ORDER- NAFTA REGION ONLY 1 PART NO. M H TCBN-T1-M3-6-L 6.0 [.237] TCBN-T1-M3-8-L 8.0 [.315] TCBN-T2-M3-6-L M3 6.0 [.237] TCBN-T2-M3-8-L 2 TCBN-T1-M4-8-L TCBN-T2-M4-8-L 8.0 [.315] M4 T MODIFICATION. ECN-05-081 ECN-07-193 CO-2010035 CO-2010578 CO-2010636 CO-2010649 DRN NJB SF TC TC SF OW 1 L 2.0 [.079] 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0-61.0 [.197] [.236] [.276] [.315] [.355] [.394] [.434] [.473] [.512] [.552] [.591] [.630] [.670 [.709] [.749] [.788-2.402] 1.6 [.063] 2 2.0 [.079] 9.5 [.375] I M 3 3.0 4.0 5.0 6.0 7.0 8.0 9.0 [.118] [.158] [.178] [.236] [.276] [.315] [.355] 10.0 [.394] NOTES: 1) ALL PRIMARYDIMENSIONS IN mm, SECONDARY DIMENSIONS IN [INCHES]. 2) LENGHTS AVAILABLE IN INCREMENTS OF 1mm. TOP PCB MOUNTING HOLE DIA 4 +/- 0.08 [.158 +/- .003] INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL TO RICHCO INTERNATIONAL Co. Ltd. AND MAY NOT BE DISCLOSED OR REPRODUCED IN WHOLE OR PART WITHOUT THEIR WRITTEN CONSENT RICHCO, INC. WWW.RICHCO-INC.COM Top Panel Thickness T MATERIAL: TITLE: 4 BOTTOM PCB MOUNTING HOLE FOR ANY PANEL THICKNESS: DIA 3.2 [.125] FOR M3 SCREW DIA 4.8 [.188] FOR M4 SCREW L A DATE 26/07/05 08/11/07 08/02/08 24/02/09 27/04/09 28/07/09 1.6 [.063] I +1-0.5 H F E D B C FIXING SCREW NOT SUPPLIED D DRN IMPERIAL GENERAL TOLERANCES 0.010 ARE FOR REFERENCE UNLESS OTHERWISE STATED 1 DECIMAL PLACE 2 DECIMAL PLACES ANGULAR 1 THREADED CIRCUIT BOARD SUPPORT, NYLON COLOUR: BLACK PART No: TCBN-TX-MD-H-L NPR REF: 04-133 NJB METRIC GENERAL TOLERANCES 0.25 ARE PRIMARY UNLESS OTHERWISE STATED 1 DECIMAL PLACE 2 DECIMAL PLACES ANGULAR 1 NYLON 6/6 (RMS-172) DRG No: DATE 26/10/04 E CHKD RC 3 SIZE A4 DATE 26/10/04 SCALE SHEET No NTS 1 OF 1 F FORM No 0145/02 4