Part Number 856799 455/465 MHz Duplexer Data Sheet Features For CDMA 450 MHz BC5 Block AB applications Usable bandwidth 4.975 MHz (each band) High Tx/Rx isolation Low loss High attenuation Single-ended operation for Tx and Balanced operation for Rx Ceramic Surface Mount Package (SMP) Hermetic Small size RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 5.00 x 5.00 x 1.22 mm Bottom View SMP-20G 1 2 3 0.56 1.22 NOM. 1.35 MAX. 4 8 5.00 1.27 7 Pin No. 1 2 4 6 3,5,7,8 5.00 1.27 2.08 6 5 Description Rx out + Rx out ANT TX in Ground 0.64 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width +0.15/-0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev C 10/09 (c) TriQuint Semiconductor Page 1 of 7 Part Number 856799 455/465 MHz Duplexer Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) Parameter (3) -10 to +85 oC Typical (4) Maximum Unit - 455 - MHz - 2.6 4.0 dB 38 15 5 6 44 17 7 8 - dB dB dB dB 10 13 - dB - 465 - MHz - 3.0 4.0 dB -1.0 -0.3/0.6 1.0 dB -10 -4.0/0.5 10 deg 47 20 25 35 55 24 29 42 - dB dB dB dB 10 13 - dB 55 47 50 150 50 - dB dB Minimum Tx-Ant Specification Center Frequency Maximum Insertion Loss 452.5 - 457.475 MHz Absolute Attenuation (5) 462.5 - 467.475 MHz 480 - 1200 MHz 1200 - 2100 MHz 1574 MHz Return Loss at Tx Terminal 452.5 - 457.475 MHz Ant-Rx Specification Center Frequency Maximum Insertion Loss 462.5 - 467.475 MHz Amplitude Imbalance 462.5 - 467.475 MHz Phase Imbalance 462.5 - 467.475 MHz Absolute Attenuation (5) 452.5 - 457.475 MHz 477 - 480 MHz 480 - 1200 MHz 1200 - 2100 MHz Return Loss at Rx Terminal 462.5 - 467.475 MHz Tx-Rx Specification Tx to Rx Isolation 452.5 - 457.475MHz 462.5 - 467.475 MHz Tx Impedance: (Single-ended) (6) Rx Impedance: (Balanced) (6) ANT Impedance: (Single-ended) (6) 52 42 - Notes: 1. 2. 3. 4. 5. 6. All specifications are based on the TriQuint test circuit shown on page 6 In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Typical values are based on average measurements at room temperature Relative to zero dB This is the optimum impedance in order to achieve the performance shown Subject to change or obsolescence without notice Rev C 10/09 (c) TriQuint Semiconductor Page 2 of 7 Part Number 856799 455/465 MHz Duplexer Data Sheet Tx Typical Performance (at room temperature) TX Frequency Response TX Passband Response -1 0 -10 -2 -20 -30 -3 -40 -50 -4 -60 -70 422.5 442.5 462.5 482.5 -5 447.5 497.5 452.5 457.5 462.5 Frequency (MHz) Frequency (MHz) TX Wideband Response TX Port Return Loss 0 0 -10 -5 -20 -30 -10 -40 -50 -15 -60 -20 -70 700 1200 1700 2200 445 450 455 Frequency (MHz) ANT Port Impedance Swp Max 457.475MHz 0.8 2. 0 2. 0 6 0. 1.0 0.8 465 TX Port Impedance Swp Max 457.475MHz 6 0. 460 Frequency (MHz) 1.0 200 0. 4 0. 4 3. 0 0 3. 0 4. 0 4. 5.0 5.0 0.2 0.2 10.0 5.0 4.0 3.0 2.0 1.0 0.8 0.6 0.4 0.2 0 10.0 5.0 4.0 3.0 2.0 1.0 0.8 0.6 0.4 0 10.0 -10.0 0.2 10.0 -10.0 2 0 -5. -4 .0 0 -4 .0 -0.8 -1.0 -0.8 -0 .6 Rev C 10/09 -1.0 .0 .0 -2 -3 -0 .6 .0 -2 .4 -0 Swp Min 452.5MHz Subject to change or obsolescence without notice -3 .0 .4 -0 -5. -0. 2 -0. Swp Min 452.5MHz (c) TriQuint Semiconductor Page 3 of 7 Part Number 856799 455/465 MHz Duplexer Data Sheet Rx Typical Performance (at room temperature) RX Frequency Response RX Passband Response 0 -1 -10 -2 -20 -30 -3 -40 -50 -4 -60 -70 422.5 442.5 462.5 Frequency (MHz) 482.5 -5 457.5 497.5 467.5 472.5 Frequency (MHz) RX Wideband Response 0 462.5 RX Port Return Loss 0 -10 -5 -20 -30 -10 -40 -50 -15 -60 -20 -70 700 1200 1700 455 2200 460 465 ANT Port Impedance 475 RX Port Impedance Swp Max 467.475MHz 0.8 2. 0 2. 0 6 0. 1.0 Swp Max 467.475MHz 6 0. 0.8 470 Frequency (MHz) Frequency (MHz) 1.0 200 0. 4 0. 4 0 3. 0 3. 0 4. 0 4. 5.0 5.0 0.2 0.2 10.0 5.0 4.0 3.0 2.0 1.0 0.8 0.6 0.2 0 0.4 10.0 10.0 5.0 4.0 3.0 2.0 1.0 0.8 0.6 0.4 0 0.2 10.0 -10.0 -10.0 2 2 -0. 0 -5. 0 -4 .0 -4 .0 -3 .0 Rev C 10/09 .0 -2 -1.0 -0.8 -0 .6 .0 -2 -1.0 -0.8 -0 .6 .4 -0 Swp Min 462.5MHz Subject to change or obsolescence without notice -3 .0 .4 -0 -5. -0. (c) TriQuint Semiconductor Swp Min 462.5MHz Page 4 of 7 Part Number 856799 455/465 MHz Duplexer Data Sheet Isolation/Imbalance Typical Performance (at room temperature) ISOLATION -30 -40 -50 -60 -70 440 450 460 470 480 Frequency (MHz) Amplitude Imbalance Frequency Response 2 1 10 0 0 -1 -10 -2 461 463 465 467 Phase Imbalance Frequency Response 20 469 -20 461 Frequency (MHz) Subject to change or obsolescence without notice 463 465 467 469 Frequency (MHz) Rev C 10/09 (c) TriQuint Semiconductor Page 5 of 7 Part Number 856799 455/465 MHz Duplexer Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitic Note: For the matching components, the inductors Q=40 at 460 MHz is recommended. ANT 50 ANT 50 Single-ended 4 1 Rx out + 250nH 2 Rx out - 20nH 3,5,7,8 6 Tx in Tx Input 50 Single-ended 50 Marking PCB Footprint 5.20 2.28 TriQuint logo Rx Output 150 Balanced 150 1.47 Marking code CG JJJYM .84 .71 Date code ID dot .43 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code 1.47 .84 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 2.7 12.8 ID dot O330 TriQuint logo 0.3 2.0 4.0 O1.5 A 1.75 5.5 5.25 O102 O20.2 O13.0 2.0 Direction of travel 1.8 Section A-A 5.25 8.0 O1.5 12.0 A Dimensions shown are nominal in millimeters Packaging quantity: 4000 units/reel Subject to change or obsolescence without notice Rev C 10/09 (c) TriQuint Semiconductor Page 6 of 7 Part Number 856799 455/465 MHz Duplexer Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Power Handling at Tx Port (50 oC, > 50,000 hrs) Symbol Minimum Maximum T Tstg -10 -40 +85 +85 +30 Unit o C C dBm o Important Notes Warnings Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability Compatible with JEDEC J-STD-020C Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev C 10/09 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 7 of 7