PolySwitch(R) PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 PRODUCT: RXEF075 DOCUMENT: SCD 25221 PCN: C46465 REV LETTER: E REV DATE: DECEMBER 9, 2009 PAGE NO.: 1 OF 1 Overcurrent Protection Device Raychem Circuit Protection Products www.circuitprotection.com Specification Status: Released Electrical Rating Voltage: Current: 72V MAX 40A MAX Insulating Material: Cured, Flame Retardant Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 24 AWG Tin Plated Copper Marking: Manufacturer's Mark and Voltage 72 Part Identification XF075 Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -10.2 -15.2 -(0.40) -(0.60) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.0 (0.12) TABLE II. PERFORMANCE RATINGS : CURRENT RATINGS I HOLD RATED CURRENT AMPERES AT 20C HOLD 0.75 AMPERES AT 20C HOLD TRIP 0.75 1.50 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: INITIAL RESISTANCE VALUES TIME TO TRIP OHMS AT 20C MIN MAX 0.25 0.40 SECONDS AT 20C, 3.75A MAX 6.3 ONE HOUR POST-TRIP RESISTANCE STANDARD TRIP OHMS AT 20C MAX 0.60 UL, CSA and TUV PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant TRIPPEDSTATE POWER DISSIPATIO N WATTS AT 20C NOMINAL 0.92 ELV Compliant (c) 2005, 2009 Tyco Electronics Corporation. All rights reserved. Pb-Free