1
MRF6414 PHOTOMASTERMOTOROLA RF DEVICE DATA
The RF Line
C9
P1
T2
Figure 1. 960 MHz Test Circuit Schematic
C1, C3 100 pF, Chip Capacitor, Hight Q
C2, C7 330 pF, Chip Capacitor, 0805
C5, C8 10 nF, Chip Capacitor, 0805
C6 15
m
F, Capacitor, 63 V
C9 100
m
F, Capacitor, 16 V
D1, D2 Diode 1N4007
P1 1 kΩ, Trimmer
R1 1 kΩ, Resistor
R2 58 Ω, Resistor, 0805
T1 MRF6414
T2 Transistor NPN Type SD135
C8
C7
C1
R2
RF INPUT
50
W
C2
D1
D2
T1 C3
C4
C5 C6
RF OUTPUT
50
W
+VCC
R1
Order this document
by MRF6414PHT/D
SEMICONDUCTOR TECHNICAL DATA
CASE 333A–02, STYLE 2
Motorola, Inc. 1995
MRF6414 PHOTOMASTER
2MOTOROLA RF DEVICE DATA
Figure 2. 960 MHz PC Board Photomaster
(SCALE 1:1)
TEST CIRCUIT @ f = 960 MHz
TEFLON
GLASS 1/50 INCH Er = 2.55
Figure 3. 960 MHz Test Circuit Components Layout
C9
C8
C7
INPUT OUTPUT
MRF6414
C1
C2
C6
C4
C5
C3
FB
3
MRF6414 PHOTOMASTERMOTOROLA RF DEVICE DATA
PACKAGE DIMENSIONS
DIM
AMIN MAX MIN MAX
MILLIMETERS
0.965 0.985 24.52 25.01
INCHES
B0.390 0.410 9.91 10.41
C0.250 0.290 6.35 7.36
D0.075 0.090 1.91 2.28
E0.095 0.115 2.42 2.92
F0.110 0.130 2.80 3.30
H0.155 0.175 3.94 4.44
J0.004 0.006 0.11 0.15
K0.090 0.116 2.29 2.94
L0.725 BSC 18.41 BSC
N0.415 0.435 10.55 11.04
Q0.120 0.135 3.05 3.42
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
STYLE 2:
PIN 1. EMITTER
2. BASE
3. EMITTER
4. EMITTER
5. COLLECTOR
6. EMITTER
IDENTIFICATION
NOTCH N
L
E
J
HC
SEATING
PLANE
1 2 3
4 5 6
K2 PL D4 PL
F2 PL
Q2 PL
–B–
M
A
M
0.13 (0.005) B M
T
–A–
–T–
CASE 333A–02
ISSUE C
MRF6414 PHOTOMASTER
4MOTOROLA RF DEVICE DATA
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty , representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability , including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “T ypicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer .
How to reach us:
USA/EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: RMFAX0@email.sps.mot.com – T OUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
MRF6414PHT/D
*MRF6414PHT/D*
◊
